Mte nakup rabljenega (9)

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL KEY DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping surface NC rotary table: Rotary indexing table: 2,400 x 1,900 mm Max. transport load (with centrally supported load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor/brand main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range rpm 0-738 mid range rpm 739-1,842 high range rpm 1,843-6,000 Axis drives/axis feed rates: Axis drive motors: brand Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Feed rate max.: X, Y, and Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Linear axis drive systems: X-axis (longitudinal): preloaded ball screw Ø 63 x 40 Z-axis (vertical): preloaded ball screw Ø 63 x 20 Y-axis (cross): preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal) 6 pcs. type INA RUE 55 EL Z-axis (vertical) 4 pcs. type INA RUE 65 EL Y-axis (cross): 8 pcs. type INE RUE 55 E-HL and additional damping unit Clamping table / table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch spacing outer slots 1,800 mm) Weight: Weight RT3000: approx. 32,000 kg Rjdpfjygiwqsx Abhen Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with boost to 37 bar IKZ Special operating mode 4 RepairFIT is our proven offer for a profitable entry into our product lines. Machines offered in this line are sourced by us following a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Stanje: rabljeno, Leto izdelave: 2014, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 20 obr/min, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel ranges / Axis travels: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table / Table area: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: Units: 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. workpiece load: kg 11,000 Paintwork: Graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: min⁻¹ 20–6,000 Max. torque: Nm 935 Spindle speed control: 3-stage (oil-cooled) With automatic changeover Redjygipaspfx Abhjn Feeds: X-, Y- and Z-axis mm/min 2–15,000 Max. rapid traverse speed: X-, Y- and Z-axis mm/min 25,000 Max. feed force: X-, Y- and Z-axis: N 22,000 Space requirements: Length approx. BT3200 mm 8,100 (without cross conveyor + 1,280mm) Height approx. (at Z=1,500mm) mm 3,800 Width approx. (at Y=1,200mm) mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & ICS (internal coolant supply) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any obvious faults and defects identified are professionally repaired by our skilled service team.

Stanje: dober (rabljeno), 1 rabljen dobro ohranjen univerzalni rezkalni glavi sistem "HURON" s hidravličnim vpenjanjem orodja Rsdpfoyc Eizsx Abhjn Proizvajalec: EMENA - MTE, poreklo Španija Model: VAR 3 - BF, BM, KOMPAKT Tehnični podatki: Vreteno – pritrditev: ISO 50 Izlet: 358 mm Maks. obseg vrtljajev: 3000 obr./min Maks. pogonska moč: 22 kW Prirubnica za pritrditev: zunanji premer: Ø 306 mm Mere D x Š x V: 460 x 306 x 360 mm Teža: ca. 150 kg Pribor / posebne lastnosti: • 2 zasukani ravnini, sistem "HURON" • Hidravlično vpenjanje orodij • Za naknadno vgradnjo na klasične, NC ali CNC rezkalne stroje (npr.: MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, UNION, ARSENAL, ...) ali vrtalne stroje katere koli vrste, … Siegfried Volz obdelovalni stroji Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Stanje: dober (rabljeno), Leto izdelave: 1998, Ref. št.: 10583 Proizvajalec: MTE Tip: BF 4200 Leto izdelave: 1998 Vrsta krmiljenja: CNC Krmiljenje: Heidenhain TNC 426 Lokacija skladišča: Halberstadt Država izvora: Nemčija X-hod: 4000 mm Y-hod: 1200 mm Z-hod: 1500 mm Število vrtljajev: 2.500 o/min Hitri pomik X/Y/Z: 400 m/min Vpenjalna površina mize (D x Š): 4200 x 1000 mm Menjalec orodij: 40 Največja obremenitev mize: 13.000 kg Vpenjalo orodja: SK 50 Teža: 20 t Število T-utorov: 7 kos Širina T-utorov: 22 mm Razdalja med utori: 140 mm Dodatne informacije: Rjdpfx Absx Sw Ivohsn - Heidenhain ročni kolesni upravljalnik HR410 - 3D skener, infrardeč - Kroglično vreteno na oseh Z in Y je vpeto in leži na kombiniranih radialno/aksialnih valjčnih ležajih in radialnih krogličnih ležajih s togostjo 250 N/qm. Stroj je mogoče videti pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, All detailed information is in the photos; for further details, please contact us. Rodpfxjw Dt Tlo Abhjn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Takoj na voljo na lokaciji: CNC ležiščna rezkalna stroj MTE Tip Kompakt Plus Leto izdelave 2000 Heidenhain TNC 410 Miza 2200 x 750 mm Pomiki X/Y/Z 2000/800/800 mm Obremenitev mize 4 t Vpenjanje SK 50 Hidravlično vpenjanje rezkarja Število vrtljajev vretena 40 – 2500 min⁻¹ Rsdpfxeyayffe Abhon Moč vretena 15 kW Skupna priključna moč 30 kW Sistem za hlajenje Teža 12 t Cena: 14.500 € + DDV iz lokacije

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.870 mm, skupna širina: 3.417 mm, skupna dolžina: 10.994 mm, proizvajalec krmilnikov: Heidenhain, lastna masa: 23.500 kg, 4 osi hkrati + B- in C-os hladilno sredstvo pod visokim pritiskom skozi vreteno (20 barov) 4. os na mizi (vodoravno in navpično) centralni sistem mazanja menjalnik orodij s 40 mesti trakasti transporter za ostružke Premik v vzdolžni smeri X-os: 6000 mm Prečni premik Y-os: 1200 mm Navpični premik Z-os (višina): 1500 mm Moč na vretenu: 36 kW Rjdpfxexbukwj Abhon Priključek na vretenu glave za rezkanje (ISO): ISO 50 Največji razpon vrtljajev: 40 > 3000 vrt/min

Leto izdelave: 2002, Stanje: dober (rabljeno), Hinge width: 300 mm Insertion width / height: 390 x 100 mm Insertion length: 4615 mm Height from floor to lower edge of chip chute: 700 mm Hinge drive: 0.37 kW Transport dimensions (L x W x H): approx. 5965 x 750 x 1010 mm (height without feet!) Weight: approx. 500 kg Rjdpfx Abomdqx Hehen Adjustable foot height: yes This hinge-type chip conveyor, manufacturer TEKNICALDE, model TC 1 ½ 300, was used on an MTE Kompakt CNC bed-type milling machine. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.580 mm, skupna širina: 3.452 mm, skupna dolžina: 10.345 mm, proizvajalec krmilnikov: Heidenhain, lastna masa: 23.500 kg, 4-assige gelijktijdige hogedrukkoeling door de spil (20 bar), 4e as op de tafel (zowel horizontaal als verticaal), Renishaw meetsysteem, centraal smeersysteem, gereedschapswisselaar met 24 posities, T-sleuf Stolle-werktafel inbegrepen (7000 x 1500 mm), spaantransportband. Langsverplaatsing X-as: 6000 mm Rodpfx Ajwaiuksbhjn Dwarsverplaatsing Y-as: 1200 mm Verticale verplaatsing Z-as (hoogte): 1500 mm Klembereik tafel: 7000 x 1500 mm Spilvermogen: 30 kW Opname in freeskopspil (ISO): ISO 50 Max. toerentalbereik: 40 – 3.000 rpm