Tabela Vodnik Železnici nakup rabljenega (85)

Stanje: zelo dobro (rabljeno), JBS guide bushing for the pressure system suitable for Star Ecas 32 Kjdpfxepl U Efs Abhsnd - On request, the matching maintenance unit can also be supplied.

Stanje: rabljeno, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion and other battery pack qualification. Particularly suited for: - Lifetime testing, BMS verification, and validation of complex charge cycles - High energy recovery – up to 85% efficiency - Flexible expansion through many channels or higher current ranges - Enterprise-level operation thanks to comprehensive safety features and data persistence Technical Data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge testing) Power per channel: 600 W to 60 kW (modular, scalable) Total power: Up to 600 kW (depending on configuration) Voltage ranges: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measurement data): Up to 50 kHz (with BatteryPro) Data recording: Cyclic, 10 µs – 1 s / Storage for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, Pulse, Drive Cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Regenerative capability: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recovery Temperature monitoring: Optionally integrable, range 0–90 °C ±2 °C Dimensions & Weight: Depending on configuration (e.g. 19″ rack, ca. 300 kg) Knjdpfxowwrxaj Abhjd Power supply: 3-phase, 400 V AC (depending on model) Application areas: E-mobility, battery development, quality assurance, cell research Weight: ca. 455 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Stanje: rabljeno, Milling machine in good working condition Kedpfx Abeuxlvmshjnd

Stanje: novo, Made in Italy. Centre height: 300 mm Swing over bed: 600 mm Swing over cross slide: 380 mm Distance between centres: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle mount: Camlock 8" Spindle speeds: (12) 16 – 1,200 rpm Motor power: 9.2 kW (optional equipment / standard: 7.5 kW) Feed Z-axis: (93) 0.028 – 6.43 mm/rev Kodsd Nk Ncspfx Abhond Feed X-axis: (93) 0.012 – 2.73 mm/rev Threads, metric: (54) 0.5 – 224 mm Threads, Whitworth: (55) 72 – 1/8 TPI Threads, module: (54) 0.5 – 112 mm Threads, diametral pitch: (54) 64 – 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock quill diameter: 85 mm Tailstock quill travel: 200 mm Tailstock taper: MT 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic lubrication of guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Multifix quick-change tool post with 4 holders - Tailstock movement pneumatically assisted - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X and Z axes - High-quality branded electrical components, e.g. Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed centres - All safety devices according to CE standards: Chuck guard with plexiglass shield, secured with micro switch. Tool post guard with plexiglass. Full-length rear splash guard. Leadscrew and feed shaft protected by light barrier (integrated into emergency stop circuit). Emergency stop push button. - Swarf container on wheels - Electric coolant unit - Fixed steady rest - Travelling steady rest - Operating tools, acceptance protocol according to DIN, operation and maintenance manual, complete electrical installation, machine manufactured in accordance with the latest CE standards EMO special price including 3-axis digital readout.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Rahlo rabljene sestavljalne mize Ruchser. Uporabljali smo jih za sestavljanje oken in vrat Schüco. Prodajamo jih, ker smo prenehali s proizvodnjo. Knedpfow Nyk Tsx Abhjd

Stanje: kot nova (razstavni stroj), various Schölly Flexilux fiber optic light guides - Ring lights Knjdefr T Ihepfx Abhsd - Gooseneck - Single light guides From €100 each (single light guide) up to €350 (large ring light) Prices EXW, quantity discounts possible

Stanje: rabljeno, Angle table with 5 T-slots Kjdpfxjcu Im De Abhjnd 12 mm T-slot width Length: 680 mm Width: 260 mm Height: 265 mm

Stanje: dober (rabljeno), Zwick Type: BZ1.0 / TH1S Zwick Tabletop Testing Machines Ksdsddantopfx Abhsnd Zwick with a maximum force of 1.0 kN. Traverse path: 1150 mm. Test speed: 0.1 ... 1800 mm/min Scope of delivery: (see pictures) (Subject to change and errors in the technical data and information!) For further questions, we are happy to assist you by phone.

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Knodpfx Ascrnm Nsbhjd Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at cross-cut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Knedpogfm Efofx Abhjd Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Leto izdelave: 2021, Stanje: rabljeno, Širina valjev: ±60 cm. Dolžina preglednega traku: ±275 cm. Kjdpfjxiw Nxex Abhond

Stanje: dober (rabljeno), Miza za spajanje trdih platnic Naprava je v celoti funkcionalna in v zelo dobrem stanju. Tehnični podatki: Maks. širina vezave: 810 mm Napajanje: pnevmatsko Kodpfx Asvkt N Ujbhsnd Teža: 140 kg Oprema: – elementi za pritrditev kartona – modul za ovijanje platnice

Leto izdelave: 1994, Stanje: rabljeno, številka stroja/vozila: 8084/77/01, Ekstruzija profila kalibrske mize Knsdpfx Abjxghqhjhed

Stanje: generalkompletno obnovljen (rabljeno), Dear customers, we currently offer idler rollers as well as drive rollers for profile belt sanding machines from the brand F. Zimmermann. The rollers have been newly coated with a more durable material for improved longevity, then crowned ground and fitted with new bearings. You will receive fully refurbished rollers in exchange for your defective rollers! Ksdpfx Abjd S Eb Aehjnd The rollers are suitable for the following machine types: Zimmermann PS0, regardless of year of manufacture Zimmermann PS1, regardless of year of manufacture Zimmermann PS1/2, regardless of year of manufacture Zimmermann PS S, regardless of year of manufacture When placing orders, please always specify the machine type and indicate which rollers you need and in what quantity. All items are in stock and can be delivered at short notice. If you have any further questions, I am happy to assist you!

Stanje: novo, Leto izdelave: 2025, For separating and sorting based on specific gravity into light and heavy fractions. Suitable for use with grain, nuts, and similar products. See PDF for details. Kedjbbr Iispfx Abhjnd Type and size selectable according to product and throughput requirements. With the machine length remaining largely unchanged, working widths of 450 mm, 600 mm, or 900 mm are available.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna širina: 700 mm, skupna dolžina: 1.400 mm, skupna višina: 500 mm, skupna masa: 2.000 kg, potrebna širina: 700 mm, zahteva za prostor dolžina: 1.400 mm, potrebna višina: 850 mm, Attention: only inspection plate from CMM dismantling with table frame Kjdpfx Asvfn Ihjbhjnd

Leto izdelave: 2001, Stanje: rabljeno, številka stroja/vozila: 29, Machine number: 29 Year of manufacture: 2001 Maximum traction force: 63 kN Maximum stroke: 1000 mm Weight: approx. 7 tonnes (machine + control cabinet + coolant system) Ksdpfednk Ukjx Abhjnd Broaching stations: 1 Cycle time: 28 sec. Cutting speed: 8 m/min Return speed: 16 m/min Shank diameter: 32 mm End piece diameter: 25 mm Dimensions (L x W x H of base machine): 4800 x 2800 x 3500 mm

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7001296, Miza Greiner Caliber Knjdpfx Aexgdp Hjbhod

Leto izdelave: 1989, Stanje: dober (rabljeno),

Leto izdelave: 2025, Stanje: novo, For separating and sorting by specific weight into light and heavy fractions. Suitable for a range of applications from grain to aluminum/plastic, rubber/textile, and even cable recycling, etc. Type and size can be selected depending on the product and throughput. With approximately the same machine length, available working widths are: 450 mm, 600 mm, and 900 mm. Knedpfx Ajchb Sbjbhed

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.400 mm, skupna dolžina: 3.500 mm, skupna višina: 800 mm, skupna masa: 7.500 kg, Measuring plate from CMM dismantling with leveling feet Knjdpfou Uiitox Abhod

Leto izdelave: 2010, Stanje: generalkompletno obnovljen (rabljeno), Bizerba TU100 totalizing table after overhaul Knsdpfsi Drwqox Abhod

Stanje: rabljeno, Chain Guide Rail and Roller Chain - Original Ehemann spare part - Suitable for Ehemann Rolex machines and others - Chain guide rail made of aluminium - For 5/8" chains - Mounting via carriage bolt: 6 mm - Dimensions: 45 x 32 mm - Weight: 1 kg/m - Price: 70 EUR/m - Roller chain made of steel - Carrier spacing: every 95 mm, 5/8" pitch - Chain length: 5 m - Weight: 5 kg/piece Ksdob A N Dqepfx Abhond - Price: 38 EUR/m

Stanje: rabljeno, Bed extension for lathe, guideway, guides, tool carriage, cross table, cross slide, bed guideway, machine bed - Guideway: from Meuselwitz lathe - Dimensions: see drawing in the photos - Size: 780/355/H390 mm - Weight: 135 kg Knedogvm Dmjpfx Abhjd