Rotacijski varjenje varjenje tabela gramofona

APS 1000 E

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Prodpfx Aorn Riqjgped Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Leto izdelave: 1998, Stanje: dober (rabljeno), številka stroja/vozila: 3862-8063-564, Offer 23036 Technical Specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drill spindle taper: MT 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min / max: 400 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm Psdpfxokzg T Rj Agpsrd - Drive: 400 V / 1.6 / 2.9 kW - Space required approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertically positioned at the rear of the machine

Stanje: novo, Table diameter: 350 mm Table load capacity: 0.1 t Pedpfx Agogvkk Nopjrd Swivel range: 0–90 degrees Table load horizontal: 100 kg Table load vertical: 50 kg Bore diameter: 30 mm Table rotation speed: 0.5 – 5 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx.: 0.2 t Required space approx.: 0.5 x 0.5 x 0.5 m Welding Table with Hollow Shaft D-DWP Rotary tilt tables with bore for rotating, tilting, and welding small workpieces up to 100 kg. - Rotary and tilt axis - Steplessly adjustable speed - Compact design - Including foot pedal

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Psdpfxsg Tdpgj Agpord Hand and foot remote control with speed display Very robust construction

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm Podpfx Aeirax Uegperd -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: novo, Load capacity: 5.0 t Workpiece diameter: 100 – 2500 mm Total power requirement: 2 x 0.37 kW Max. payload drive unit: 2500 kg Max. payload idler unit: 2500 kg Table rotation speed: 100 – 1000 mm/min Wheel diameter: 250 x 140 mm Prjdpfx Aegvwgcegped Machine weight: approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, Welding Positioner Heinrichsglück 15 Ton Load Capacity Condition: as new Complete with accessories: hand remote control, foot remote control, manual, documentation, electrical diagrams – everything available Predpfx Agohcbmpepjd Specifications: - Clamping plate diameter: 2200 mm - Height (tilted to center): 1450 mm - Height (horizontal): 1800 mm - Rotation speed: 0.025 to 1.1 rpm - Tilting range: 0 to 135° - Length: 3400 mm - Width: 1800 mm plus 300 mm - Net weight: 8000 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost: 5.000 kg, Stolpna dvigala vrtljiva naprava 5000 kg, 3000, 1000 nosilnost Pozicioner Sideros Syncrolift Dvojni stolp Brezžični ročni daljinski upravljalnik Prjdpfxouk Niys Agpsd Letnik proizvedbe: 2024 Nosilnost: 5000 kg Minimalna delovna višina: 1100 mm Maksimalna delovna višina: 1600 mm Hitrost: 0,5 obr/min Navpična nastavitev: 500 mm Premer vpenjalne plošče: 1000 mm Pogonski motor za vrtenje: 2,2 kW Dvižni motor: 2 x 2,2 kW Na voljo so različne stolpne dvigalne vrtljive naprave: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10.000 kg, 20.000 kg Zahtevajte ponudbo

Stanje: novo, Leto izdelave: 2024, Protec welding turntable, 10,000 kg load capacity Continuously adjustable speed: 0.05 - 0.5 rpm Hand-held remote control Foot pedal control available at extra cost: €390 Predpfx Agoid Szgsped Height: 650 mm Diameter: 1,600 mm

Stanje: rabljeno, Drilling capacity in steel (diameter): 40 mm Throat depth: 325 mm Quill stroke: 170 mm Table clamping surface: 730 x 590 mm Spindle speed: 130 - 1200 rpm Feed rate: 0.09 - 0.16 - 0.28 mm/rev Tool holder: Morse Taper 4 (MK 4) Total power requirement: 1.8 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.2 x 0.8 x 2.15 m Drilling machine equipped with: Feed mechanism 2 gearbox speeds Forward/reverse operation Foot switch Podpfx Ajwn T A Uogpjrd Machine lamp