T-Nut nakup rabljenega (75.491)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards Hfodpfxomhh Dzj Adroh - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Hsdpfx Aed Tbbdsdrsfh - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Hjdpfx Adsmhhx Ijrefh Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) Hedpfx Adsmhhyasrjfh - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Hfedpfsmhh Anex Adrjh - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) Hjdofdkb Uspfx Adrofh - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level. Hfedpfxoguk A Hj Adroh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Hjdsfdkbhjpfx Adrjfh - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Hedpfxemhhf Ss Adrofh Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Hsdsmhhl Hepfx Adrsfh Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Hfsdpfsmidyfsx Adreh Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. Hodpsguk Dkefx Adrefh The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version Hjdpfxoguk Dvj Adrsfh - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) Hsdpfeqt Dmyox Adrofh - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Hfodpfx Adsmhh Dterjh - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, prevoženi kilometri: 135.000 km, moč: 132 kW (179,47 KM), prva registracija: 04/2018, vrsta goriva: dizel, lastna masa: 3.450 kg, največja dovoljena obremenitev: 3.550 kg, skupna masa: 7.000 kg, medosna razdalja: 3.650 mm, naslednji pregled (TÜV): 05/2027, gorivo: dizel, barva: bela, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 2.200 mm, največja hitrost: 90 km/h, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, sistem za imobilizacijo, spojka prikolice, tempomat, zapora diferenciala, * Well-maintained German vehicle from first ownership * Vehicle ID No.: ZCFC170D805215014 * New general inspection (HU/TÜV) * New oil service Technical data: * Overall length: 6,150 mm * Overall width: 2,350 mm * Overall height: 2,600 mm * Wheelbase: 3,450 mm * Permissible gross vehicle weight: 7,000 kg * Curb weight: 3,450 kg * Payload: 3,550 kg * Trailer load: 3,500 kg Special equipment: * Storage compartment on dashboard with USB port * Towbar: ball coupling on towing bracket * 13-pin trailer socket * Audio system: digital audio system (DAB) with USB and Bluetooth hands-free function * Body builder interface with extension module * Roof shelf with additional DIN compartment * Rear differential lock * Remote control central locking * Rear axle suspension: trapezoidal with auxiliary spring * Cruise control * Air conditioning * Fog lights with static cornering light * PTO (Power Take-Off) 180 Nm * Switch for cargo area lighting * Rear cross member at end of frame * Oil sump guard Standard equipment: * Driver’s airbag * Anti-lock braking system (ABS) * Traction control (ASR) * Drive type: rear wheel drive * Model: C-series * Exterior mirrors electrically adjustable and heated * Long exterior mirrors, suitable for vehicle width 2,350 mm * Brake assist * Electronic brakeforce distribution * Electronic stability program (ESP) * Driver assistance system: lane departure warning * Digital tachograph * Electric windows * Tinted windscreen and side windows Hfsdpfx Ajzakxpodrsh * Alternator 150 A * Speed limiter 90 km/h * 6-speed transmission * A-pillar grab handle * Body type: standard flatbed * Dashboard with pixel matrix display * Fuel tank: 90 litres * Headlight range adjustment * Engine: 3.0 L – 132 kW diesel * Radio pre-installation with speakers * Wheelbase: 3,450 mm * Spare wheel with regular tyres * Spare wheel holder between longitudinal frame beams * Diesel particulate filter * Low emission in accordance with Euro 6 emissions standard * Power steering * Cabin seats: double passenger seat with headrests * Daytime running lights * Maintenance indicator * Immobilizer * Remote central locking * Permissible gross vehicle weight: 7.00 t Nationwide delivery within Germany possible! Trade-in accepted! Leasing and financing possible, also without down payment Errors, printing mistakes, and prior sale reserved

Stanje: rabljeno, prevoženi kilometri: 135.000 km, moč: 132 kW (179,47 KM), prva registracija: 04/2018, vrsta goriva: dizel, lastna masa: 3.450 kg, največja dovoljena obremenitev: 3.550 kg, skupna masa: 7.000 kg, medosna razdalja: 3.650 mm, naslednji pregled (TÜV): 05/2027, gorivo: dizel, barva: bela, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 2.200 mm, največja hitrost: 90 km/h, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, sistem za imobilizacijo, spojka prikolice, tempomat, zapora diferenciala, * Well-maintained German vehicle from first owner * Vehicle ID No.: ZCFC170D805215014 * New general inspection / TÜV * New oil service Technical Data: * Overall length: 6,150 mm * Overall width: 2,350 mm * Overall height: 2,600 mm * Wheelbase: 3,450 mm * Permissible total weight: 7,000 kg * Unladen weight: 3,450 kg * Payload: 3,550 kg * Towing capacity: 3,500 kg Special Equipment: * Storage compartment on dashboard with USB port * Tow hitch: Ball head on hitch bracket * 13-pin trailer socket * Audio system: Digital audio system (DAB) with USB and Bluetooth hands-free kit * Bodybuilder interface with extension module * Additional roof storage with DIN compartment * Rear differential lock * Remote control central locking key * Rear axle suspension: trapezoidal with auxiliary spring * Cruise control system * Air conditioning * Fog lights with static cornering light * PTO (Power Take-Off) 180 Nm * Switch for loading bay lighting * Rear crossmember at end of frame * Sump guard Standard Equipment: * Driver’s airbag * Anti-lock braking system (ABS) * Traction control system (ASR) * Drive type: rear-wheel drive * Model: C-series * Exterior mirrors electrically adjustable and heated * Extended exterior mirrors for 2,350 mm vehicle width * Brake assist * Electronic brake-force distribution * Electronic stability program (ESP) * Driver assistance system: Lane departure warning assistant * Digital tachograph * Electric windows * Tinted windscreen and side windows * Generator 150 A Hfedjzakxiepfx Adrjh * Speed limiter system 90 km/h * 6-speed transmission * A-pillar grab handle * Bodywork: standard flatbed * Instrument cluster with pixel matrix display * Fuel tank: 90 liters * Headlamp levelling * Engine: 3.0 L – 132 kW diesel * Radio pre-installation with speakers * Wheelbase: 3,450 mm * Spare wheel with running tyres * Spare wheel holder between longitudinal floor beams * Diesel particulate filter * Low emissions according to Euro 6 standard * Power steering * Cabin seats: double passenger seat with headrests * Daytime running lights * Maintenance indicator * Immobilizer * Central locking with remote control * Permissible gross weight: 7.00 t Nationwide delivery in Germany available! Trade-in possible! Leasing and financing also possible without down payment Errors, misprints and prior sale excepted

Stanje: rabljeno, prevoženi kilometri: 58.594 km, moč: 129 kW (175,39 KM), prva registracija: 08/2023, vrsta goriva: dizel, lastna masa: 4.017 kg, največja dovoljena obremenitev: 3.183 kg, skupna masa: 7.200 kg, velikost pnevmatike: 225/75 R16, konfiguracija osi: 4x2, medosna razdalja: 5.100 mm, naslednji pregled (TÜV): 08/2025, barva: bela, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, prostornina tovornega prostora: 35 m³, dolžina tovornega prostora: 6.080 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.380 mm, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, nadzor oprijema, tempomat, CERTIFIED PRE-OWNED Plus, color White IC 194, box body manufacturer: Saxas, unladen weight: 4017 kg, permissible gross weight: 7200 kg, cargo area (L x W x H): 6,080 mm x 2,480 mm x 2,380 mm, 1st axle: 225/75 R16, cloth seats, leaf suspension, 1 x airbag, tail lift: Dhollandia DHLMQ.10, digital tachograph, electronic stability program ESP, traction control ASR, automatic climate control, hydraulically dampened driver’s seat, driver’s armrest, dual passenger seat, radio, digital radio reception DAB, USB port, Bluetooth hands-free preparation, lane departure warning, power steering with City mode, adjustable steering column, electric windows, external temperature display, electrically adjustable and heated exterior mirrors, immobilizer, central locking with remote control, tinted windows, spare wheel, daytime running lights, cup holder, speed limiter: 90 km/h, plywood van body: Saxas MKD 61ME. Tail lift Dhollandia DHLMQ.10 with 1,000 kg lifting capacity. 2 rows of lashing rails. Lashing rings in the cargo floor. Front wall bump guard. Grab handle on A-pillar. Central storage compartment with USB charging port. Full technical inspection and service before delivery according to maintenance schedule and new MOT. Optional at extra cost: 1-year used vehicle warranty from mobile. 'Truck 60' performance package with deductible. For questions, please contact Jan Furtak. Tel. . Errors and changes excepted. Sale only to commercial customers. Former rental vehicle. Hjdpfjxuy Syjx Adrsfh

Stanje: zelo dobro (rabljeno), Ponujam visokokakovostni motorni reduktor SEW EURODRIVE – popolnoma nov, neuporabljen (leto proizvodnje 2022). Naprava izhaja iz zaloge, nikoli ni bila nameščena ali zagnana. Oprema je pripravljena za takojšnjo uporabo, idealna za industrijske namene: transporterji, proizvodne linije, avtomatizacija, pakirni stroji in druge aplikacije, kjer je potreben zanesljiv pogon. ⚙️ Tehnični podatki: Proizvajalec: SEW EURODRIVE Model: WA20/T DRN63M6/BE03/TH Moč: 0,12 kW Napajanje: 220–240 / 380–415 V Frekvenca: 50 Hz Obrati: pribl. 870 / 85 vrt/min Zaščita: IP54 Način delovanja: S1 Zavora: DA (BE03) Leto proizvodnje: 2022 📦 Stanje in oprema: Hodpfxoy H Ny To Adrsfh Stanje: NOVO (skladiščno) Nikoli uporabljeno 100% tehnično brezhibno Možne manjše sledi skladiščenja Natančno kot na slikah

Stanje: rabljeno, lastna masa: 6.770 kg, največja dovoljena obremenitev: 35.230 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2026, naslednji pregled (TÜV): 05/2027, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, stanje pnevmatik: 100 odstotek, barva: modra, Leto izdelave: 2023, velikost sprednje pnevmatike: 385/65 22,5, velikost zadnje pnevmatike: 385/65 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference No. for inquiries: 41010 Schmitz, SKI 24 * Year of manufacture: 2023 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Lift axle * 2x 7-pin electrical connectors * 15-pin electrical connector * Lifting and lowering device * Storage/toolbox * Working platform * Inspections: General inspection / emissions test valid until 05.2027 * Suspension: Air-sprung * Gross vehicle weight: 42,000 kg * Unladen weight: 6,770 kg * Payload: 35,230 kg * Permissible gross weight: 42,000 kg Hfsdpfx Adsynruhorsh * Axle manufacturer: SAF * Tyre condition 1st axle: 100% -- 100% | Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 100% -- 100% | Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 100% -- 100% | Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Manufacturer: Serin * Hardox round steel tipping body * Capacity: approx. 24 m³ * Year of construction: 2023 * Lift axle * Pendulum tailgate * Folding underrun protection * SAF axles with disc brakes * Full load supports * Water tank * Toolbox * Hardox floor 6 mm / sides 5 mm * Operator’s platform Liability disclaimer: Specifications subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchasing / sales / rental of commercial vehicles * Fast, straightforward financing * Application for all export documents * Order of export / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists for further information – we will be happy to advise you.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 687.000 km, moč: 294,2 kW (400,00 KM), prva registracija: 08/2007, vrsta goriva: dizel, konfiguracija osi: 8x4, medosna razdalja: 3.800 mm, gorivo: dizel, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 6.800 mm, Leto izdelave: 2007, Oprema: ABS, retarder, 8x4 Euro 5 Manual transmission Tridem 4th axle is a steering and lift axle Wheelbase: 3.80 m Hsdpfx Aordd Alodrsfh Loading platform length: 6.80 m Technically sound and ready to drive

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EcoPurge30,

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 560 kg, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, skupna višina: 1.550 mm, priključek za stisnjen zrak: 6 letvica, natančnost pozicioniranja: 0,01 mm, natančnost ponavljanja: 0,01 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, Semi-automatic depaneling / Base machine with parallel shuttle The dynamic LOW 4322 depaneling system is specifically designed for medium to high production volumes and meets evolving requirements in the manufacturing process. PCB panels made from a variety of materials are separated with maximum flexibility, precision, and throughput using low-dust, low-stress sawing and milling techniques. High-dynamic linear motor axes, cutting tools, and grippers meet the highest quality standards, ensuring the depaneler’s longevity and reliability. Made in Germany Hfodpfx Adoxt Dmxersh Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 depaneling system enables rapid product changeover while maintaining short separation and handling times. Panel loading is achieved with a parallel shuttle, clamping and fixing with pin tension technology, and, if necessary, in combination with vacuum suction cups. This machine is equipped with: • A shaft and disc tool separation module on Z-axis (automatically rotatable 0–90°) • X-Y cross-cut module with linear motor technology and high-resolution measuring system • Dual loading module built as a parallel shuttle, separated left and right with sliding doors • Aluminum profile frame with two maintenance doors (left and right) • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area: 420 x 330 mm • Automatic router length compensation (only in conjunction with shaft separation module) • Remote maintenance/support via remote connection (TeamViewer) or customer-side provision • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Router breakage monitoring (shaft routers only) • Prepared for vacuum clamping technology • ESD window and sliding doors A dust extraction unit can be offered as an optional retrofit. The high performance of the depaneler, with standard sawing or milling module, fully automatic router length compensation, camera-assisted teach-in system, and two easy-to-load PCB fixtures, can be further enhanced with various customer-specific options and features (e.g. camera vision system). Precision laser axis measurement prior to commissioning is included as part of the premium customer service for all inline and stand-alone depaneling systems from Systemtechnik Hölzer.

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: 10857, Total pressing force: 315 t Stroke: 1100 mm Installation height: 2200 mm Table clamping surface approx.: 2500 x 1000 mm Ram clamping surface approx.: 2500 x 1000 mm Maximum tool weight on ram: 6000 kg Rapid traverse down: 600 mm/s Working speed: 32 - 230 mm/s Rapid traverse up: 600 mm/s Power requirement: 158 kW Machine weight approx.: 44 t Height above floor level approx.: 6175 mm Automation Hfsdpfx Ajvmfzbedroh

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.500 mm, skupna višina: 12.000 mm, Leto izdelave: 2011, Oprema: ABS, = Weitere Optionen und Zubehör = - EBS – Elektronisches Bremssystem - Luftfederung hinten - Luftfederung vorn = Anmerkungen = Für Anfragen zum Fahrzeug betreut Sie Herr Seidel (unter Tel. gerne. Hüffermann HSA 18.70 P Containerfahrgestell 40er Zugöse, Kupplungsköpfe, BPW Achsen, Wabco ABS, Trommelbremse, Federspeicher, zulässiges Gesamtgewicht: 18.000 kg, Leergewicht: 3.418 kg, Nutzlast: 14.584 kg, Reifenprofil: 1. Achse 10–11 mm, 2. Achse 11 mm Auf Wunsch unterbreiten wir Ihnen ein Leasing- oder Finanzierungsangebot. Herr Seidel (Tel. betreut Sie gerne. Hfodpeyfrylsfx Adrjh Weitere Informationen finden Sie auf unserer Homepage. ... Irrtümer, Änderungen und Zwischenverkauf vorbehalten !!! - = Weitere Informationen = Leergewicht: 3.418 kg Zuladung: 14.582 kg zGG: 18.000 kg Wenden Sie sich an Tobias Ebert, um weitere Informationen zu erhalten.