Step Four nakup rabljenega (6.275)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Leipzig
609 km
štiristranska skobeljna
WINTERTIMBERMAX 7-23 DELUXE SPEED
Pokliči
Stanje: novo, Leto izdelave: 2026, Number of spindles: 6 pcs
Working width: 20–230 mm
Planing height: 8–160 mm
Four-sided planer moulder WINTER TIMBERMAX 7-23 DS
- Planing width: 20–230 mm
- Planing height: 8–160 mm
- 6 spindles
- Spindle diameter: Ø 50 mm
- Spindle speed: 7,000 rpm
- Infinitely variable feed speed: 6–60 m/min
- Bottom spindle, max. tool Ø: 140–180 mm
- Right spindle, max. tool Ø: 140–250 mm
- Left spindle, max. tool Ø: 140–250 mm
- Top spindle, max. tool Ø: 140–250 mm
- Second top spindle, max. tool Ø: 140–250 mm
- Bottom spindle, max. tool Ø: 140–250 mm
- Second bottom spindle, max. tool Ø: 140–250 mm
Spindle sequence:
1. Bottom: 11.0 kW
2. Right: 11.0 kW
3. Left: 11.0 kW
4. Top: 15.0 kW
5. Top: 15.0 kW
6. Bottom: 15.0 kW
7. Bottom: 15.0 kW
- Feed motor: 11 kW
- Height adjustment motor: 1.1 kW
- Total power: 105 kW
- Compressed air connection: max. 6 bar
Iodpfsyk Icmsx Adketd
- Extraction outlets: 6 x 180 mm
- Dimensions: L = 5,660 mm, W = 2,100 mm, H = 1,700 mm
- Weight: 9,000 kg
SCOPE OF DELIVERY:
- Horizontal spindles with axial bearings (hydraulic head clamping)
- Hard-chromed tables
- CE and TÜV Rheinland certified
- Pneumatic pressure before the left spindle
- Lubrication pump
- Pneumatic pressure for the feed rollers
- Cardan shaft drive
- 5 powered table rollers
Tool set:
- 1 x HM pre-scoring cutter 145 x 12.5 x 40 mm Z2 / V2
- 2 x aluminium planing heads 125 x 170 x 40 mm
- 2 x aluminium planing heads 125 x 240 x 40 mm
Set price: EUR 1,500
- Electrically adjustable top shaft with feed system: EUR 1,500
Mali oglas
Leipzig
609 km
štiristranska skobeljna
WINTERALT-1
Pokliči
Stanje: novo, Leto izdelave: 2026, Working length: 1000-1600 mm
Working width: 40-150 mm
Thickness: 10-80 mm
WINTER Outfeed Table for a Four-Sided Planer ALT-1
Automating the material infeed and outfeed for planing machines significantly increases the work efficiency of both the machine team and the operators.
Improved occupational safety is a key aspect of such an investment. Planing machines offer high throughput capacities, which can only be achieved with a uniform and continuous material feed. Manual feeding often does not ensure the required consistency and is very demanding for the operator.
Furthermore, interruptions in material feeding frequently lead to machine downtime, reduced productivity, and quality losses.
The automation systems offered are individually tailored to the needs and spatial conditions of the customer.
Transverse buffers for material infeed as well as longitudinal feed devices with upper and lower drive rollers are available.
We offer servo motors or hydraulic drives.
For material outfeed, we offer sorting tables with ejectors or material pushers.
Longitudinal sorting and buffering on crossbeams are also possible.
We also provide stacking of planed material, including advanced planing processes.
Machine control is based on the best Mitsubishi components available on the market.
Material dimensions
Length: 1000-6000 mm
Width: 40-150 mm
Thickness: 10-80 mm
Capacity up to 80 m/min
Robust chain feed
Adjustable frequency inverter speed
Itedpfx Adeyk Iafokjd
Mali oglas
Leipzig
609 km
štiristranska skobeljna
WINTERTIMBERMAX 4-18
Pokliči
Stanje: novo, Leto izdelave: 2026, Working width 180 mm
Feed motor 3 kW
Machine weight approx. 2750 kg
Four-side planer and moulding machine TIMBERMAX 4-18
- Maximum planing width: 180 mm
- Minimum working width: 20 mm
- Maximum working thickness: 110 mm
- Minimum working thickness: 8 mm
- Minimum working length (single feed): 500 mm
- Minimum working length (continuous feed): 250 mm
- Maximum stroke of movable table: 6 mm
- Maximum travel of movable guide plate: 5 mm
- Cutterhead diameter: 40 mm
- Speed of lower cutterhead: 6800 rpm
- Speed of left and right vertical spindles: 8000 rpm
- Speed of upper cutterhead: 8000 rpm
- Feed speed: 10-45 m/min
- Feed roller diameter: 140 mm
- Tool diameter lower spindle: 125 mm
- Tool diameter right and left vertical spindle: 115-170 mm
- Tool diameter upper cutterhead: 105-150 mm
- Power of front lower spindle: 5.5 kW
- Right vertical spindle, left vertical spindle, upper cutterhead drive: 5.5 kW each
- Upper cutterhead: 7.5 kW
- Feed motor: 3 kW
- Lifting motor for crossbeam: 0.75 kW
- Air pressure: 0.3-0.6 MPa
- Compressed air requirement: 0.15 m³/min
- Planing knife diameter: 120 mm × 4
- Extraction velocity: 30-35 m/s
Itodpfx Asyk H U Uedkjd
- Extraction air requirement: 150 m³/min
- Dimensions (L × W × H): 3000 × 1500 × 1600 mm
- Machine weight: 2750 kg
Mali oglas
Leipzig
609 km
štiristranska skobeljna
WINTERTIMBERMAX 420 SAW
Pokliči
Stanje: novo, Leto izdelave: 2026, Feed motor 5.5 kW
Total connected load: 58.3 kW
Machine weight approx. 4,000 kg
Four-side planer and moulder TIMBERMAX 420 SAW + 2 vertical spindles
- Maximum planing width: 160 mm
- Minimum processing width: 20 mm
- Maximum sawing width: 200 mm
- Maximum processing thickness: 120 mm
- Minimum processing thickness: 15 mm
- Minimum workpiece length (single feed): 650 mm
- Minimum workpiece length (continuous feed): 480 mm
- Max. stroke of moveable table: 6 mm
- Max. travel of guide plate: 6 mm
- Saw spindle diameter: 50 mm
- Saw spindle keyway: 10 mm × 2
- Saw spindle speed: 4,000 rpm
- Planing spindle diameter: 40 mm
- Speed of lower planing spindle, left and right vertical spindle: 6,800 rpm
- Speed of upper planing spindle: 8,000 rpm
- Feed speed: 6–30 m/min
- Feed roller diameter: 140 mm
- Tool rotation diameters:
Front lower cutterblock (straight knife): 125 mm
Side knife diameter × outer thickness: 152 mm × 12 mm
Right and left vertical spindle: 115–170 mm
Upper planing spindle: 105–150 mm
Saw blade diameter (left and right): 180–300 mm
- Total motor power: 58.3 kW
Front lower spindle: 5.5 kW
Right vertical spindle, left vertical spindle, upper planing spindle: 7.5 kW each
Saw spindle motor (left and right): 18.50 kW each
Feed motor / rear auxiliary feed motor: 5.5 kW and 0.75 kW × 2
Crossbeam lifting motor: 0.75 kW
- Air pressure: 0.3–0.6 MPa
- Compressed air requirement: 0.15 m³/min
- Planing cutter diameter: 120 mm × 4
- Saw blade diameter: 150 mm × 2
- Extraction air speed: 30–35 m/s
- Extraction air requirement: 150 m³/min
- Dimensions (L × W × H): 4,500 × 1,530 × 1,720 mm
- Machine weight: 4,000 kg
Ijdpfx Adeyk H T Rjkjtd
Mali oglas
Leipzig
609 km
štiristranska skobeljna
WINTERZUF-1
Pokliči
Leto izdelave: 2026, stanje: novo, Working length 1000–1600 mm
Working width 40–150 mm
Thickness 10–80 mm
WINTER Infeed System for a Four-Side Planer ZUF-1
Automating the material infeed and outfeed in planer machines significantly increases the work efficiency of both machine operators and the production team.
Enhanced work safety is a crucial benefit of such an investment. Planer machines deliver high throughput rates, which are achieved through reliable and continuous material feeding. Manual infeed often fails to ensure the required continuity and imposes a considerable burden on the operator.
Moreover, interruptions in material feeding frequently result in machine downtime, reduced productivity, and loss of product quality.
The automation systems offered are custom-tailored to meet the individual requirements and spatial conditions of the customer.
Transverse accumulators for material infeed as well as longitudinal feed devices with upper and lower drive rollers are available.
We offer servo motors or hydraulic drives.
For the outfeed side, we provide sorting tables with ejectors or material pushers.
Longitudinal sorting and buffering on cross beams are also possible.
We also offer the stacking of planed materials, including advanced planing process solutions.
Machine control is based on the best Mitsubishi components available on the market.
Material dimensions:
- Length: 1000–6000 mm
- Width: 40–150 mm
- Thickness: 10–80 mm
- Throughput up to 80 m/min
Iedpeyk H Tdsfx Adkotd
- Robust chain feeder
- Adjustable frequency inverter speed
Mali oglas
Leipzig
609 km
štiristranska skobeljna
WINTERTIMBERMAX 6-23-TT-TS PREMIUM
Pokliči
Stanje: novo, Leto izdelave: 2025, Dimensions (length/width/height): 4960x1900x1700 mm
Total power requirement: 0 kW
Weight: 6000 kg
TIMBERMAX 6-23-TT-TS PREMIUM
Four-Side Planer WINTER TIMBERMAX 6-23-TT-TS PREMIUM
- Max. planing width (cutter diameter f140): 230 mm
- Min. planing width (cutter diameter f140): 20 mm
- Max. planing height (cutter diameter f140): 160 mm
- Min. planing height (cutter diameter f140): 10 mm
- Min. workpiece length: 650 mm
- Max. adjustment range of feed table: 5 mm
- Max. adjustment range of infeed fence: 10 mm
- Number of spindles: 6
- Spindle diameter: F40 mm
- Spindle speed: 6000 rpm
- Feed speed: 6–36 m/min
- Tool diameter:
First bottom spindle (jointing cutter f165 mm, planing head f140 mm): F125–F160 mm
Left & right spindles, top spindle, second bottom spindle: F112–F200 mm
Spindle sequence:
- 1st bottom spindle: 5.5 kW
- 2nd right spindle: 5.5 kW
- 3rd left spindle: 7.5 kW
Iodpfx Adjv Ucirskjtd
- 4th top spindle: 7.5 kW
- 5th second bottom spindle: 5.5 kW
- 6th second top spindle: 5.5 kW
- Width adjustment, left spindle motor: 0.75 kW
- Feed motor: 5.5 kW
- Carrier lifting height adjustment motor: 0.75 kW
- Extraction ports: 6 x F125 mm
- Feed roller diameter: F140×F35×50 mm
- Vertical spindle adjustment range: 40 mm
- Horizontal spindle adjustment range: 20 mm
- Dimensions: L=4960, W=1900, H=1700 mm
- Weight: 6000 kg
INCLUDES:
- Touch screen control
- Machine base made of cast iron
- Electrically adjustable top shaft with feed system
- Electrically adjustable left shaft
- Hard-chromed tables
- CE standard, TÜV Rheinland certified
- Pneumatic side pressure before left shaft
- Lubricant pump
- Lubrication pump with central lubrication
- Pneumatic pressure for feed rollers
- Feed system with cardan drive
- 3 powered feed rollers in the table
Mali oglas
Leipzig
609 km
štiristranska skobeljna
WINTERTIMBERMAX 6-23-TT PREMIUM
Pokliči
Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4960 x 1900 x 1700 mm
Total power requirement: 0 kW
Weight: 6000 kg
Four-Sided Planer WINTER TIMBERMAX 6-23-TT PREMIUM
- Max. planing width (tool rotation diameter ø140): 230 mm
- Min. planing width (tool rotation diameter ø140): 20 mm
- Max. planing height (tool rotation diameter ø140): 160 mm
- Min. planing height (tool rotation diameter ø140): 10 mm
- Min. workpiece length: 650 mm
- Max. infeed table stroke range: 5 mm
- Max. adjustment range of infeed fence: 10 mm
- Number of spindles: 6
- Spindle diameter: ø40 mm
- Spindle speed: 6000 rpm
- Feed speed: 6–36 m/min
- Tool diameter, first bottom spindle (rebating cutter ø165 mm, planer head ø140 mm): ø125–ø160 mm
- Left, right, top spindle, second bottom spindle: ø112–ø200 mm
Spindle configuration:
- 1st bottom spindle: 5.5 kW
Itodpfx Adjv Uchnokjd
- 2nd right spindle: 5.5 kW
- 3rd left spindle: 7.5 kW
- 4th top spindle: 7.5 kW
- 5th second bottom spindle: 5.5 kW
- 6th second top spindle: 5.5 kW
- Width adjustment motor, left spindle: 0.75 kW
- Feed motor: 5.5 kW
- Height adjustment motor, crosshead: 0.75 kW
- Extraction outlets: 6 x ø125 mm
- Feed roller diameter: ø140 × ø35 × 50 mm
- Vertical spindle adjustment range: 40 mm
- Horizontal spindle adjustment range: 20 mm
- Dimensions: L=4960, W=1900, H=1700 mm
- Weight: 6000 kg
INCLUDES:
- Heavy-duty cast iron machine base
- Electrically adjustable top spindle with feed system
- Electrically adjustable left spindle
- Hard-chromed tables
- CE standard, TÜV Rheinland certified
- Pneumatic side pressure before the left spindle
- Lubricant pump
- Centralized lubrication pump
- Pneumatic pressure for feed rollers
- Feed system with cardan drive
- 3 powered feed rollers in the table
Mali oglas
Rödermark
625 km
Hidravlični štirivaljni stroj za obročno upogibanje pločevine
DAVIMCB 3034
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1993, številka stroja/vozila: 9340020, Oferta 26035
Dane techniczne
- Trzy napędzane walce, każdy walec regulowany hydraulicznie
- Do podginania i walcowania stożkowego, ramię boczne odchylane
- Sterowanie z obrotowego pulpitu sterowniczego z cyfrowym wyświetlaczem wartości rzeczywistych
- Maks. szerokość robocza: 3050 mm
- Maks. grubość blachy przy 400 N/mm² bez podginania: 20 mm
- Podginanie przy minimalnej średnicy gięcia 5x średnica górnego walca: 16 mm
- Średnica górnego walca: 340 mm
- Średnica walców bocznych: 250 mm
- Średnica dolnego walca: 300 mm
- Napęd: 400 V / 9,5 kW
Iodpfsyq E S Eex Adkstd
- Prędkość robocza regulowana
- Zapotrzebowanie na miejsce: ok. S 6200 x W 1650 x G 1650 mm
- Waga maszyny: ok. 16 000 kg
- Łączna waga maszyny + maszt wspornikowy + ramię wspornikowe: 19 500 kg
- w zestawie: - Przedłużone końce walców do montażu walców profilowych
- Urządzenie do gięcia stożkowego
- Boczne ramię wspornikowe przestawiane hydraulicznie
- Górny maszt wspornikowy przestawiany hydraulicznie
Mali oglas
Avstrija
226 km
Hidravlične enostebrne stiskalnice
KK-Industries Made in EuropaEinständer C-Presse 150 to
Pokliči
Stanje: novo, Pressing Force: 150 t
Motor: 15 kW
Installation Height: 500 mm
Max. Stroke Length: 400 mm
Table Size: 900 x 600 mm
Ram Area: 900 x 600 mm
Table Height: 850 mm
Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm
Weight approx.: 8,000 kg
Oil Filling: 400 l
Hydraulic C-Frame Press
General Information:
Design: C-frame, hydraulic
Pressing Force: 150 t at 240 bar
Return Force: 30 t at 150 bar
Voltage: 400 V / 50 Hz
Standards: Machinery Directive EN 693
Paintwork: RAL 7035 – Light Grey
Warranty: 12 months
Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm
Total Weight: approx. 8,000 kg
Control System:
Mode 1: Setup mode without light sensor
Mode 2: Automatic mode (single stroke) with light sensor
PLC Control: Siemens S7–1200
Safety PLC: SICK
Swiveling operator panel with soft starter
Two-hand control (mobile)
Light sensors: SICK 700 + 130 mm
Stroke Measurement System: Ruler scale (500 mm)
Touchscreen: 9" Siemens, memory for up to 500 tool sets
Remote maintenance: Secomea module
8 free I/O ports for external connections (e.g., robot, coil line)
Work area lighting (double)
Hydraulic System:
Main Cylinder: Ø 270 mm
Auxiliary Cylinders: 2 x Ø 70 x 40 mm
Auxiliary Guides: 4 x Ø 50 mm
Motor: 15 kW / 22 HP (IE3)
Auxiliary Motor: 2.2 kW / 3 HP
Pump: 45 cc, 65 l/min – REXROTH
Auxiliary Pump: present
Tank Volume: 500 l
Oil Volume: 400 l
Air cooler for oil tank
Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center)
Iedpfxswzzzfs Adkjtd
Pressure & speed adjustable via PLC
Mechanical Data:
Installation height: 500 mm (distance ram – table top)
Stroke length: 400 mm
Die depth: 650 mm
Throat depth: 350 mm
Table height: 850 mm (floor to table top)
Plate dimensions:
Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific)
Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding)
Speeds (adjustable via PLC):
Approach: 120 mm/s
Return: 140 mm/s
Pressing phase: 13 – 5 mm/s
Control & Electronics:
Main control cabinet
Pressure & speed adjustment via PLC
Swiveling operator panel
Mobile two-hand control
Light sensors SICK
Stroke measurement system
Display: 9" Siemens touchscreen
Remote maintenance via Secomea module
Safety & Operation:
Hydraulic proportional valves
Dual-channel safety system
Lateral safety doors (sliding to the rear)
Operating instructions & parts list (German), including maintenance plan
Mali oglas
Gelsenkirchen
835 km
Vzorčni tisk
HidralmacViersäulenpresse
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2016, stiskalna sila: 160 t, Pressure: 160 t
Stroke: 600 mm
Total power requirement: 7.5 kW
Machine weight approx.: 7 t
Return force: 16 t
Main cylinder: 1 unit
Column diameter: 160 mm
Installation height: 800 mm
Table surface: 1200 x 800 mm
Lateral column distance: 400 mm
Table height: 850 mm
Isdpfx Adofxyi Iokjtd
Max. table load: 5 t
Advance speed: 1 to 9.8 mm/sec
Return speed: 1 to 9.8 mm/sec
Oil volume AW 46: 220 l
Mali oglas
Gelsenkirchen
835 km
Vlečna stiskalnica
HidralmacViersäulenpresse
Pokliči
Stanje: novo, Leto izdelave: 2017, številka stroja/vozila: DF0152, stiskalna sila: 80 t, Pressure: 80 t
Stroke: 500 mm
Total power requirement: 12 kW
Machine weight approx.: 5.1 t
Operation: Two-hand control
Cylinders: 1
Working height: 800 mm
Working area: 800 x 800 mm
Table size: 800 x 800 mm
Ram plate: 2800 x 1300 mm
Table height: 800 mm
Approach speed: 9.8 mm/sec
Itodpfx Aefxyh Hedkod
Working speed: 9.8 mm/min
Return speed: 18 mm/sec
Travel path: 700 mm
Column diameter: 75 mm
Motor for deep drawing function: 10 kW
Main motor: WEG 15 kW
Pump: REXROTH, Parker electronic axial piston pump, kW rating
Blank holder cushion capacity: 25 t (at 280 bar)
Blank holder cushion stroke: 200 mm
Blank holder cushion rod diameter: 30 mm
Blank holder cushion travel speed: 80 mm/sec
Hydraulic block: REXROTH/Parker
Hydraulic valves: REXROTH/Parker
Hydraulic tank: 300 L
Hydraulic tank oil requirement: approx. 250 L
Hydraulic pressure control: via PLC (minimum pressure 10 t)
Hydraulic air cooling: for oil cooling, with electric fan
Hydraulic lubrication for guides: manual, via grease nipples or cartridges
Electronic components: SIEMENS / MOELLER
Control panel: on swivel arm
Control: automatic via two-hand operation with key switch, manual via control panel in setup mode
Operation: movable two-hand operation
USB interface: for data transfer
Remote control: Siemens for remote maintenance
Spacer sensors: for stroke length adjustment
Pressure hold: 0–10 sec.
Oil tank: 150 l
Safety light curtains by Schmersal: 800 mm long, front and rear, 300 mm diagonal at the bottom.
Mali oglas
Gelsenkirchen
835 km
Stiskalnica z drsno mizo
HidrobrasilViersäulenpresse
Pokliči
Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0362, stiskalna sila: 250 t, Pressure: 250 t
Passage width: 1800 mm
Stroke: 600 mm
Total power requirement: 22 kW
Itjdpfxefxyinj Adksd
Approx. machine weight: 24 t
Dimensions (L x W x H): approx. 3390 x 3400 x 3800 mm
Column diameter: 160 mm
Retraction force: 25 t
Max. working height: 800 mm
Table size: 1800 x 1600 mm
Ram size: 2350 x 1600 mm
Table height above floor: approx. 900 mm
Hydraulic table movement: 25 mm/sec
Max. table load: 5 t
Advance speed: 10 mm/sec
Pressing speed: 10 mm/sec
Return speed: 25 mm/sec
Rapid traverse speed: 10 mm/sec
Oil tank: 600 l
Oil cooling (electrical): 1.5 kW (max)
Recommended oil: 46 grade / 10 μm
SIEMENS monitor: 10 inch
Vibration dampening plates:
The machine is mounted on four specially manufactured damper plates, each 450x450x85 mm.
Oil tank with oil cooling:
The tank holds 1,500 l. The oil is cooled by a dedicated pump, which activates at 30°C.
Oil filtration system:
Independent of the main and cooling pumps, the press features a filtration circuit. The pump runs continuously but only requires 1.5 kW.
Energy-saving function:
If the main pump is not required for a preset period, it switches to energy-saving mode and then consumes only about 2 kW/h. The pump is immediately at full capacity again when pressure is required.
Safety technology:
Optionally, safety PLCs from SICK or Pilz can be selected. The light curtains are from the same manufacturer or from German manufacturer SCHMERSAL.
Control cabinet:
40% of the control cabinet space remains available for future installations. All components inside the cabinet are from SIEMENS.
Screws:
All screws used in the machine are zinc-plated or yellow passivated.
Oil drip tray:
The hydraulic block and pump are placed in a small oil drip tray to collect any oil during repair or hose change.
Noise emissions:
According to standards, the press produces a maximum of 67 decibels.
Accessories:
Roller loading bridges:
Two removable loading bridges with rollers, each 1500 mm long, supports equipped with large heavy-duty castors.
Parallelism monitoring:
Both cylinders are monitored by Balluff position measuring systems and Sick wire-draw encoders. Parallelism monitoring activates at the start of the pressing operation. Monitoring accuracy can be set via the controller. The function is deactivated during idle travel. On each outer side of the ram, a SICK cable-pull encoder measures position. The controller opens or closes the oil flow to the cylinders using specially designed fast valves. Achievable parallelism accuracy across the entire width is better than 1 mm.
Mali oglas
Gelsenkirchen
835 km
Tisk s štirimi stolpci
CaronnoViersäulenpresse
Pokliči
Stanje: rabljeno, Leto izdelave: 1991, stiskalna sila: 650 t, Pressure: 650 t
Clear width: 920 mm
Stroke: 1750 mm
Machine weight approx.: 47 t
Itedpfsfhmuvex Adkjd
Table area: 2000 x 1500 mm
Ram area: 2000 x 1500 mm
Installation height: 2100 mm
Hydraulics: 203 bar
Closing speed: 500 mm/min
Pressing speed: 0.5 - 10.4 mm/sec
Opening speed: 250 mm/sec
Release speed: 0.5 - 66.4 mm/sec
Return force: 150 t
Total power requirement: 75 kW
Space requirement approx.: 4.4 x 2.5 x 7.5 m
Mali oglas
Gelsenkirchen
835 km
Proizvodna stiskalnica
HidrobrasilViersäulenpresse
Pokliči
Stanje: rabljeno, Leto izdelave: 2019, stiskalna sila: 250 t, Pressure: 250 t
Passage width: 2500 mm
Stroke: 500 mm
Total power requirement: 60 kW
Approx. machine weight: 39 t
Dimensions (L x W x H): 2720 x 3750 x 4350 mm
Return force: 25 t
Max. working height: 800 mm
Table size: 3090 x 1500 mm
Ram size: 3090 x 1500 mm
Table height above floor approx.: 1000 mm
Advance speed: 400 mm/sec
Pressing speed: at 125 t, 50 mm/sec
Return speed: 400 mm/sec
Rapid traverse speed: 400 mm/sec
Oil tank: 1500 l
Oil cooling (electric): 3 kW (max)
Vibration damping plates: each 450x450x85 mm
Pressure: 250 t at 220 bar t/bar
Pump capacity max.: 176 l/min
Recommended oil: 46 grade / 10 μm
Hydraulics by Bosch Rexroth or other German manufacturers: Parker, Hydac
SIEMENS control: included
Light curtains by Schmersal/Pilz: Pilz
Monitor: Omron 12 inch
Vibration damping plates:
The machine is mounted on four special damping plates, each measuring 450x450x85 mm.
Oil tank with oil cooling:
The tank has a volume of 1500 l. The oil is cooled by a dedicated pump, which switches on at 40°C.
Oil filter system:
Independent of the main and cooling pumps, the press has a dedicated filter circuit. The pump operates continuously, but requires only 1.5 kW.
Energy saving function:
Ijdpfxod Nq Ide Adkotd
If the main pump is not required for a set period, it switches to energy-saving mode, then using only about 2 kW/h. Full performance is immediately available again when pressure is needed.
Safety technology:
The safety components are supplied by Pilz. The light curtains are from the same manufacturer.
Control cabinet:
The control cabinet has 40% of its volume reserved for retrofitting. All cabinet components are supplied by Schneider.
Screws:
All screws used in the machine are zinc-plated or yellow galvanized.
Oil tray:
The hydraulic block and pump are positioned in a small oil tray so that any oil can be collected during repairs or hose changes.
Noise emission:
The press emits a maximum of 75 decibels according to standards.
Accessories:
Roller loading bridges:
Two roller loading bridges, each 1500 mm long, removable, supports fitted with large, heavy-duty steel castors.
Parallelism monitoring:
Both cylinders are monitored by Balluff displacement measurement systems and Sick wire-draw encoders. Parallelism monitoring is activated at the start of the pressing operation. Monitoring precision can be configured in the control system. The function is deactivated during idle runs. The position of the ram is measured left and right at the ends by two SICK cable-pull encoders. The control system then opens or closes the oil flow to the cylinders via special fast-acting valves. The achievable parallelism accuracy will be under 1 mm across the entire width.
Mali oglas
Gelsenkirchen
835 km
Preoblikovalna stiskalnica
HidralmacViersäulenpresse
Pokliči
Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 4303, stiskalna sila: 500 t, Pressure: 500 t
Passage width: 2100 x 1500 mm
Stroke: 1000 mm
Total power requirement: 62 kW
Approx. machine weight: 39 t
Dimensions L x W x H: 5100 x 2800 x 4040 mm
Retraction force: 40 t
Main cylinders: 2 units
Column diameter, main cylinders: 360 mm
Table size: 2100 x 1500 mm with T-slot
Ram size: 2100 x 1500 mm
Table height above floor: approx. 850 mm
Advance speed: 300 mm/sec
Return speed: 300 mm/sec (at 20 t ram weight)
Pressing speed, pressure phase: 200 t = 28 mm/sec
Oil tank: approx. 1000 l
Auxiliary cylinders: 2 units
Column diameter, auxiliary cylinders: 120 mm
Overall table plate size: approx. 2750 x 1600 mm
Overall ram plate size: approx. 2750 x 1600 mm
Pressing speed, pressure phase: 300 t = 20 mm/sec
Pressing speed, pressure phase: 500 t = 6 mm/sec
Ram retraction force: 40 t
Control circuit voltage: 24 V
Voltage: 400 V
Frequency: 50 Hz
Ijdpfedyynvsx Adketd
Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min
Installation height (distance working table – ram plate): 1500 mm
Hydraulic manifold: REXROTH
Pressure control: via PLC (min. pressure 50 t)
Cylinders: 4 x Ø90 x 70 mm
Stroke length: 300 mm, adjustable via PLC
Ejector forward speed: 95 mm/sec
Ejector return speed: 240 mm/sec
Capacity: 4 x 15 t at 250 bar
Pressure adjustment: via monitor from 50-500 t
Pressure holding time: 0–900 sec
Hydraulic tank: 2000 l
Control system Siemens: S7 300
Program memory: 200 programs
Electronics by German manufacturers: SIEMENS/MÖLLER
Control panel: on swivel arm
Photoelectric sensors Sick: 1500 mm on the front side
Control System Functionality:
The linear encoder continuously transmits the ram and ejector positions to the controller. Travel distance, upper stop position, and switching point (where the press changes from rapid approach to working speed), as well as the target end position, can be easily and quickly entered via the monitor control.
Working speed can be adjusted in 1 mm/sec increments from 0 to 10 and in 10 mm increments from 10 to 300 mm.
Additionally, the machine features pressure monitoring which, upon reaching the desired pressure, either returns the ram to the top position or holds the pressure at the set level (within 5% tolerance) for the preset time, then opens.
The control system monitors secured areas, the entire hydraulic system, pumps, and temperature. It also synchronizes the main cylinders and compensates for unilateral overloads.
The control system is housed in a separate control cabinet. The actual press operation is performed via a control panel mounted on a swivel arm, thus reducing movement distances for the operator.
Additional Equipment:
• Polycarbonate glass 8 mm in the rear door interior
• Polycarbonate glass 8 mm in the side doors of the work area and within the work area
• Liquid channel with 25 mm radius on the front, rear, and sides of the table
Special Features of the Press:
• Incl. 10% reserve (max. capacity 550 t)
• Steel grade: Stainless steel LCG ASTM A36, manufactured according to DIN 8651
• Motor and pump automatically stop once the tool is closed and compensate for 5% pressure loss, providing significant cost savings
Nitrogen Compression Unit:
The scope of delivery includes a nitrogen compression unit capable of generating an instantaneous pressure of 280 bar, which can be switched on and off as needed.
Mali oglas
Gelsenkirchen
835 km
Stiskalnica za prah
HidrobrasilViersäulenpresse
Pokliči
Stanje: novo, stiskalna sila: 100 t, Pulverpresse
Druck: 100 t
Durchgangsbreite: 700 mm
Hub: 450 mm
Maschinengewicht ca.: 6 t
Abmessungen L x B x H: ca. 3000 x 1210 x 3100 mm
Rückzugskraft: 10 t
Motorleistung: 22 kW
Max. Arbeitshöhe: 850 mm
Geschwindigkeit Vorlauf max.: 1 - 100 mm
Geschwindigkeit Rücklauf: 1 - 100 mm/sec
Geschwindigkeit Druckphase : 1 - 10 mm/sec.
Stößelplatte: 1090 x 600 mm
Tischplatte: 1090 x 600 mm
Positioniergenauigkeit: 0,1 mm
Tischhöhe über Boden ca.: 800 mm
Öltank: 300 l
Ölkühlung (elektrisch): 1,5 kW (max)
Auswerfer: d=100 mm
Auswerferhub: 210 mm
Auswerfer-Druck: 100 t
Anzahl der Auswerferstifte: 1 Stück
Monitor WEG: 15 Zoll
Isdpfjfxyhqex Adketd
Hydraulik und Tank oben auf der Presse.: 2.000,-- ?
Umlaufender Wartungsbalkon: 2.400,-- ?
Siemens S7 1500: 3.000,-- ?
Ölauffangwanne: 2.400,-- ?
Heizkreisanschlüsse (3 Stück), überwacht, m. Zeiteinstellfkt.: 5.800,-- ?
Mali oglas
Пловдив
897 km
Linija za varjenje in CNC čiščenje s štirimi glavami
StürtzSE - HSM 30/26 Compact
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2024, Štirikotna varilna in CNC čistilna linija za kote STURTZ SE - HSM 30/26 Compact. Celotna linija deluje pravilno in dobro. Oprema je delovala do zadnjega trenutka pred demontažo.
Itodpfov Uzr Eox Adkod
Mali oglas
Gelsenkirchen
835 km
Vzorčni tisk
HidrobrasilTuschierpresse
Pokliči
Stanje: rabljeno, Leto izdelave: 2019, stiskalna sila: 200 t, Pressure: 200 t
Stroke: 800 mm
Total power requirement: 25 kW
Return force: 16 t
Main cylinder: 1 unit
Column diameter: 150 mm
Installation height: 1200 mm
Ram height: 1000 mm
Ram size: 1300 x 2220 mm
Table surface: 1500 x 1300 mm
Total table size: 1300 x 2220 mm
Lateral column spacing: 820 mm
Table surface: 1500 x 1300 mm
Table height: 800 mm
Max. table load: 8 t
Approach speed: 1 - 9.8 mm/sec
Return speed: 2.5 - 25 mm/sec
Oil volume AW 46: 300 l
Machine weight approx.: 17 t
Dimensions (L/W/H): 2420 x 1300 x 4782 mm
Pressure adjustable via rotary control, displayed on manometer: 0 - 200 t
Itedpfx Adsd E Irljked
Speed adjustable via rotary control: 1 - 10 mm
Oil cooler: electric
Mali oglas
Tauberbischofsheim
555 km
štiristranska skobeljna
WEINIGUnimat 22 E
Pokliči
Stanje: zelo dobro (rabljeno), Število vreten 6 kos.
Delovna širina 220 mm
Višina skobljanja 120 mm
Dolžina poravnalne mize 2.000 mm
Pogon podajanja 5,5 kW
Hitrost podajanja 36 m/min
Utorna ležišča Da
Premična vretena Da
Avtomatski štiristranski skobeljni in profilirni stroj Weinig Unimat 22E za štiristransko skobljanje in profiliranje lesa z utorno ležišče za kratke in ukrivljene obdelovance ter premično vreteno za padajoče širine in dolgo poravnalno mizo.
Vreteno 1: Spodaj (5,5 kW) / 40 mm / 6.000 obr/min
Vreteno 2: Desno (4 kW) / 40 mm / 6.000 obr/min
Vreteno 3: Levo (5,5 kW) / 40 mm / 6.000 obr/min
Vreteno 4: Desno (5,5 kW) / 40 mm / 6.000 obr/min
Vreteno 5: Zgoraj (7,5 kW) / 40 mm / 6.000 obr/min
Vreteno 6: Spodaj (4 kW) / 40 mm / 6.000 obr/min
Iedsyiu R Ispfx Adkotd
Mali oglas
Sierakowska Huta
932 km
Štiristranski skobeljnik
WEINIG U 14K
Pokliči
Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 6674
TEHNIČNI PODATKI
- maks. širina skobljanja: 150 mm
- maks. višina skobljanja: 130 mm
7 vreten:
Isdpfsx Sq Dqex Adketd
1) spodnje vodoravno 150 mm 3 kW
2) desno navpično 130 mm 3 kW
3) levo navpično 130 mm 4 kW
4) zgornje vodoravno 150 mm 4 kW
5) spodnje vodoravno 150 mm 3 kW
6) desno navpično 130 mm 4 kW
- premer vseh vreten: 35 mm
- vsa vretena nastavljiva gor/dol in levo/desno
- zgoraj 4 zobati vlečni valji
- zgoraj 4 gumijasti izhodni vlečni valji
- zgoraj 2 pritisni valji
- električna nastavitev debeline skobljanja: 0,25 kW
- dolžina vstopne mize: 1970 mm
- centralno mazanje mize
- brezstopenjska nastavitev hitrosti podajanja
- podajalni motor: 1,5 kW
- premeri odsesovalnih priključkov: 6x120 mm
- dimenzije d/š/v: 4000x1300x1600 mm
- teža približno 3000 kg
– nemška proizvodnja
– s 6 glavami
– rabljeni skobeljni stroj, v zelo dobrem stanju
Neto cena: 36.900 PLN
Neto cena: 8.790 EUR
Neto cena izračunana po tečaju 4,2 PLN/EUR (ob večjih nihanjih tečaja se cena lahko spremeni)
Mali oglas
Sierakowska Huta
932 km
Štiristranski mokri skobeljnik
WEINIGHydromat 22 AL na 8 głowic
Pokliči
Stanje: zelo dobro (rabljeno), Catalogue number: 7715
TECHNICAL DATA
- Max. workpiece width: 220 mm
- Max. workpiece height: 130 mm
- 8 spindles:
1) Bottom horizontal 220 mm 5.5 kW
2) Right vertical 130 mm 7.5 kW
3) Left vertical 130 mm 7.5 kW
4) Right vertical 130 mm 5.5 kW
5) Top horizontal 220 mm 11 kW
– Spindle 5 electrically adjustable up/down
6) Bottom horizontal 220 mm 5.5 kW
7) Bottom horizontal 220 mm 5.5 kW
– Spindle 7 with support + Jointer system (cutterhead sharpening)
8) Universal 220 mm, adjustable 360°, 7.5 kW
- All spindles adjustable up/down, right/left
- Spindle diameter: 40 mm
– Top section:
- 6 double-toothed infeed rollers + 1 single
- 3 double smooth rubber-coated outfeed rollers + 3 single
- Meter counter
– Bottom section:
- Toothed feeding roller, driven and oscillating in bottom table
- 3 smooth driven steel rollers
- Feed via Cardan shaft rollers
- Pneumatic pressure rollers
- Variable feed speed adjustment + 2-speed gearbox 10–60 m/min
Iedpfjw Ipcvox Adkotd
- Feed motor: 10 kW
- Electric thickness adjustment
- Body lifting motor: 0.75 kW
- Central table lubrication
- Extraction port diameter: 5 x 140 mm, 3 x 120 mm
- Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm
- Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm
- Weight: approx. 5,000 kg
ADVANTAGES
– 8 cutterheads
– Universal spindle
– Ideal for processing wet and dry timber
– German-made, WEINIG brand
– Unpainted
– Very few working hours
– Used planer, like new condition
Net price: 165,900 PLN
Net price: 39,500 EUR (depending on an exchange rate of 4.2 EUR)
(Prices subject to change with significant exchange rate fluctuations)
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Sierakowska Huta
932 km
Štiristranski skobeljni stroj, širok 800 mm
Kupfermühlena 6 głowic
Pokliči
Stanje: zelo dobro (rabljeno), Catalogue Number 7641
TECHNICAL SPECIFICATION
- Max. planing width: 800 mm
- Max. planing height: 200 mm
From above:
- Powered, toothed infeed roller
- Pawls
- Pressure unit
- 2 powered, toothed feed rollers
- Pressure unit
- 800 mm, 4-knife planing shaft – 7.5 kW
- Pressure units
- 800 mm, 4-knife profiling shaft (equipped with 3 straight knives, 1 profiling knife)
- Pressure unit
- Smooth, powered outfeed roller
From below:
- Guide rail
- Infeed table
- Smooth feed roller
- 800 mm, 4-knife planing shaft – 7.5 kW
- 2 smooth feed rollers
- Split, smooth sliding roller
- Lateral pressure at outfeed
From the rear:
2 side spindles + pressure units:
1) Right vertical 90 mm, 4 kW
2) Left vertical 90 mm, 4 kW
- Spindle diameter: 35 mm
- Spindles are alternately positioned
- Spindles adjustable up/down, right/left
3) Additional lower horizontal spindle 350 mm, adjustable up/down + right/left – 5.5 kW
- Spindle diameter: 40 mm
At outfeed: 4 upper metal sliding rollers, 2 lower powered rubber rollers
- Adjustable rollers in the lower table
- Electric height adjustment for planing
- 6 feed speeds: 7/14/9/18/11.5/23 m/min
- Feed motor: 2.2 kW
- Extraction port diameters: 3 × 180 mm, 130 mm
Itodpjyqt Iujfx Adkjd
- Dimensions (L×W×H): 3100 × 2000 × 1900 mm
- Weight: approx. 3500 kg
ADVANTAGES
– Top-performing wide planing machine for wet and dry wood
– Perfect for beams, flooring, etc.
– 3 planing shafts + 3 spindles
– Made by KUPFERMUHLE – German manufacture
– Used planer, in very good condition
Net price: 64,900 PLN
Net price: 15,450 EUR (based on 4.2 EUR rate)
(Prices may vary depending on currency fluctuations)
Mali oglas
Bydgoszcz
807 km
NA ZALOGI Električna upogibna stiskalnica
OtinusPBE-1204-CNC STEP ROCK22+
Pokliči
Stanje: novo, Leto izdelave: 2024, Many of our machines are available directly from stock. Call us to learn more!
The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website.
Itsdpfxsrp Dp Te Adkjd
Electric Press Brake PBE-1204-CNC STEP ROCK22+
Technical Specifications
- Maximum sheet thickness to be bent (S235): up to 3.0 mm
- Rated pressing force: 400 kN
- Maximum bending length: 1250 mm
- Depth (distance between tool and back wall): 300 mm
- Maximum beam stroke: 210 mm
- Maximum open height: 410 mm
- Distance between the side frames: 2600 mm
- Maximum backgauge travel: 750 mm
- Motor power: 2.0 kW
- Length: 1960 mm
- Width: 1450 mm
- Height: 2610 mm
- Weight: 4000.0 kg
Tooling
- Servo-controlled automatic stops on linear guides: 2 pcs.
- Front supports: 2 pcs.
- Backgauge (X-axis) adjustment: Electric motor
- Beam (Y-axis) adjustment: Electric motor
- Punch clamping system: Quick-release AMADA type
Professional Support
We ensure that we stay in close contact with our customers. That’s why we provide a support package with every machine purchase, including expert assistance from Otinus technicians.
Visit and test our machines
Take part in an exclusive demonstration, where a qualified Otinus technician will showcase the full functionality of the machine. You are welcome to provide your own technical drawings and sample materials.
Scope of machine delivery:
A 2-day operator training and commissioning program
- Day 1 (up to 8 hours) – Commissioning and training on the control system.
- Day 2 (up to 8 hours) – independent operation under supervision of our technician – possibility of programming specific parts.
Phone support from a specialist
- 7:30 AM to 9:00 PM (Mon-Sat) – an 8-hour support package to be used within 12 months.
Free loan of transport rollers and two lifting jacks to facilitate positioning the machine at the customer’s site. Rollers and jacks are provided upon prior request (at least 7 days before delivery).
Terms of cooperation
- 24-month warranty period.
- Delivery time: approx. 6-8 weeks.
This does not apply to machines marked as available from stock.
- The machine is brand new
- Warranty and post-warranty service provided by the seller
- The customer is responsible for the machine during unloading and transport on their premises.
Mali oglas
Izdebnik
546 km
Podajalnik za štiristransko skobeljnico
podajnik do strugarki czterostronnej
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Min/maks višina elementa: 15-100 mm
Min/maks dolžina elementa: 500-2000 mm
Itsdoymn Rcspfx Adksd
Min/maks širina elementa: 25-230 mm
Hitrost podajanja: 5-36 m/min
Mali oglas
Ilsfeld
538 km
štirigredni drobilnik
4-Wellen-Zerkleinerer GZ 30GZ 30
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 2 kW (2,72 KM), širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.000 mm, skupna masa: 1.300 kg, Technical data:
Hopper opening: Length x Width 1250 x 1000 mm
Itedpfeyma Tisx Adksd
Length x Width 1250 x 1000 mm
Cutting unit opening:
Length x Width 562 x 462 mm
Number of shafts: 4
thereof: Cutting shafts 2
Number of cutting discs: 23
Shaft speed: 25 rpm.
Olajšamo vam iskanje: "step four"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.







































































































































































