Citat 4 Vrečko nakup rabljenega (59.702)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) Hfjdpfx Afjd Tbbdewof - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. Hjdpfx Afefdkb Tswoff When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level. Hfjdpfx Asd Tqalsfwsf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Hjdpfx Afofdkb Uewjff - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) Hfsdpfeguk A Hex Afwsf - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. Hfodpsguk Dkofx Afwsf The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time Hfjdefdkbhspfx Afwef - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version Hedpfx Aeguk Dvefwoff - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, Hsdpeyz Iccsfx Afweff vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo 4 kose turbin Schlick - 320 mm, vključno z motorji 7,5 kW. Turbine iz Schlick ROTO-JET RB500 5.2/4/7,5. Tip turbin - 5.2. Količina abraziva - 140 kg/min. Hitrost abraziva na izhodu - 70 m/s. Turbine po generalni obnovi. Stroji za peskanje, peskalniki. Cena za 1 kos - 3000 EUR. Hfsdpfsvphf Usx Afwef

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, prostor za palete: 108 evropske palete, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Hedpfov Ukz Ajx Afwsff Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Hodpsxy Tlwofx Afwsff

Stanje: zelo dobro (rabljeno), Stanje: rabljeno, delujoče Proizvajalec: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Opis stroja: Na prodaj profesionalni lepilni agregat HOT-MELT BÜHNEN / MELER 6050, namenjen industrijskemu nanašanju lepila. Hfjdpsy Aam Nofx Afwof Visokokakovostna naprava – evropska proizvodnja, uporablja se v: pakiranju pohištveni industriji lesnopredelovalni industriji proizvodnih linijah ⚙️ Tehnični podatki (iz tablice): Napajanje: 230V / 50-60 Hz 400V (3-fazno) Moč: do 4,7 kW Maks. temperatura: 200°C Maks. tlak: do 160 bar Izhodi: 2 Model: HB 6050-2 NI120 📦 Komplet vključuje: ✔️ Lepilni agregat BÜHNEN / MELER ✔️ 4 grelne cevi (celoten komplet!) ✔️ Kable in priključke, vidne na fotografijah 🔍 Stanje: predmet rabljen normalni znaki uporabe v dobrem tehničnem stanju notranjost rezervoarja vidna na slikah prodaja se natančno kot na fotografijah

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Maks. tlak: do 160 bar Maks. temperatura: do 200°C Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi 🔍 Tehnično stanje: naprava rabljena vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah Hfodpfjy Aagisx Afwsf

Stanje: novo, Ponujam profesionalno črpalko za sodčke priznanega nemškega proizvajalca Lutz – namenjeno delu z različnimi tekočinami (kemikalije, olja, industrijski mediji). ✅ Stanje: ✔️ Novo ✔️ Ohišje motorja je bilo zamenjano z originalnim (tovarniškim) – prejšnje je bilo poškodovano med transportom ✔️ Popolnoma delujoča, pripravljena za uporabo 🔩 Tehnični podatki: Proizvajalec: Lutz Pumpen GmbH (Nemčija) Model črpalke: MP PP 50/41-R DL SS Motor: MI 4-230 Napajanje: 220–230 V / 50 Hz Moč: 450–500 W Tok: 2,5 A Zaščitni razred: IP24 Dolžina cevi: 1200 mm Material: PP (polipropilen) + nerjavno jeklo (SS) ⚙️ Uporaba: industrijska kemija olja, tehnične tekočine industrija, delavnice, proizvodnja praznjenje sodov in rezervoarjev 📦 Komplet vsebuje: ✔️ Črpalka Lutz ✔️ Motor MI 4-230 Hfjdpfx Afoyzulwewef ✔️ Cev + oprema, vidna na slikah 🌍 Država izvora: 🇩🇪 Nemčija ℹ️ Dodatne informacije: Visokokakovostna oprema – nemška proizvodnja Idealno za profesionalno uporabo Možnost pošiljanja ali osebnega prevzema

Stanje: zelo dobro (rabljeno), Wide Belt Sander FORMAT 4 Finish 1302 - used - Constant working height thanks to top section adjustment, Combination unit with contact roller and sanding pad, Contact roller is rubber-coated, Pneumatic activation of contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 Abrasive belt size: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min. Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port diameter: 2x200 mm Motor power: 18.5 kW Motor power (second motor): 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Hodpfexnm Rcex Afwoff Quality Information: - Belt tracking / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 18 kW (24,47 KM), vhodna napetost: 400 V, vhodni tok: 40 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Oprema: CE označba, dokumentacija / priročnik, Ponujamo to rabljeno obdelovalno središče FORMAT-4 PROFIT H200R 13.33 s prehodom, letnik 2022. Tip: PROFIT H200R 13.33 Serijska številka: 30B.05.067.22 Koda: 9417 Nazivna napetost: 400,0 V Število faz: 3P+N Frekvenca: 50/60 Hz Nazivni tok: 40,0 A Moč: 18,0 kW Leto izdelave: 2022 Krmilna napetost: 24 VDC Minimalno varovalo: 32 A Maksimalno varovalo: 50 A Minimalni zračni tlak: 8 bar Poraba zraka: 350 Nl/min Hfjdpfx Afjyvtq Uswof Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2016, Used machine Cross-sanding automatic machine Year of manufacture: 2016 Product Advantages Beneath perfectly painted, stained, or oiled wood surfaces, there is always a perfectly sanded area! Felder sanding machines are distinguished by solid construction, state-of-the-art machine technology, and maximum productivity. Key highlights at a glance: - Sanding width: 1350 mm - Sanding thickness: 3–170 mm - Combined superfinish unit - Touchscreen control for work processes - The Felder operating concept ensures maximum process and work safety Your benefits at a glance: Time savings - Motorized adjustment of the contact roller in 1/100 mm increments from the control panel - Innovative unit arrangement for pre-sanding and fine sanding of veneered workpieces - Brush units at the machine outfeed - Lacquer sanding as optional additional equipment Hedpjw I Uv Uefx Afwoff Convenience - Fixed feed table height (upper part of the machine is adjusted) - Touchscreen control with clear image display and program memory - Machine data acquisition for sanding belt wear and more - Tool-free handling when changing sanding belts - Large foldable table extensions for heavy workpieces Flexibility - Units for calibration, fine sanding, or lacquer sanding - Infinitely variable feed speed up to 20 m/min via inverter Innovation - Electronically segmented sanding shoe with silicone technology for minimal air consumption - Combined superfinish unit incl. chevron glide belt to compensate for oscillation marks Quality - Heavy-duty machine construction - Durable machine components Standard features Control system: finish 1350 classic Control unit with 7" touch color display, 100 program storage spaces, maintenance interval notifications Plain-text error messages Amperemeter for load monitoring Feed table - Fixed infeed height – stationary table, 900 mm - Electric height adjustment of units including fine adjustment from the control panel - Infinitely variable feed speed from 2.8–20 m/min adjustable by inverter from the control panel - Hand guard and workpiece overthickness protection - Workpiece detection sensor with 25 sensors, 55 mm segment width - Endless honeycomb structured belt conveyor - Automatic feed belt centering Cross sanding unit finish 1350C high gloss - Segmented, electronically-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Chevron glide belt between sanding pads, sanding belt for homogeneous sanding without oscillation marks - Variable pressure regulation on the control side - Electro-pneumatic sanding belt oscillation - Electronic sanding belt tracking safety - 1 motor with 7.5 kW (10 HP) - Star-delta starting - Cleaning blower with timer control - Cutting speed 12 m/s - Sanding belt 140 x 4560 mm Combined superfinish unit 1350C: - Rubber, grooved contact roller with 85–90° Shore hardness and 142 mm diameter - Electromotorically positioned grit compensation - Segmented, electro-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Variable pressure regulation on the control side - Chevron glide belt between sanding pad and sanding belt for homogeneous finish without oscillation marks - Mechanically preloaded rubber pressure rollers - Electro-pneumatic sanding belt oscillation - Electronic sanding belt tracking safety

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: Hjdpfsx Hllxsx Afweff - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 2001, DDS vlažilnik Hjdpfx Afjyx A S Hjweff Hitropritrditvene tirnice Technotrans hlajenje in kroženje Brez obračanja Števec izpisov: 42 milijonov.

Stanje: skoraj kot novo (rabljeno), Treif Broodsnijmachine 4-24MM In goede werkende staat. Voor meer informatie kunt u een aanvraag sturen. Hedpfxoumpg Re Afwsff

Stanje: zelo dobro (rabljeno), nosilnost: 4.000 kg, Oprema: nožno daljinsko upravljanje, Heinrichsglück 4 tone nosilnosti, TOP stanje Varilna vrtljiva miza 4000 kg, kompletni set Nosilnost vodoravno 4000 kg, nosilnost v nagibu 4000 kg Stopenjsko nastavljiv nagib in hitrost vrtenja Zelo robustna Hitrost brezstopenjsko nastavljiva od 0,05 do 1,5 obr./min, digitalni prikaz Hedpfx Aoyuph Ejfwoff Premer vrtljive mize 1500 mm Višina vodoravno 1230 mm, nagnjena do sredine 1000 mm Dolžina 2,0 m x širina 1,6 m Ročni daljinski upravljalnik in nožni daljinski upravljalnik

Stanje: zelo dobro (rabljeno), Kataloška številka 7836 TEHNIČNI PODATKI - vhod lijaka za nalaganje 800x600mm Hsdpfsyz Simox Afwjff - izhod za zdrobljen les fi 160mm - delovna širina rotorja 580mm - glavni motor 22kW - črpalni motor 0,75kW - število nožev 15 kos - dimenzija noža (kronasti) 40x40mm - sito 25mm - potisni predal - električni avto-reverz - dimenzije dolžina/širina/višina 1730x1200x1620mm - teža 1100kg PREDNOSTI – nemška proizvodnja – DTR dokumentacija – potisni predal – avto-reverz – Rabljeni sekalnik, zelo dobro stanje Neto cena: 39900 PLN Neto cena: 9500 EUR po tečaju 4,2 EUR (Cene se lahko spreminjajo z večjimi nihanji)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 440 mm, hitro pomikanje X-os: 400 m/min, vrtljajska hitrost (min.): 2.500 obr/min, proizvajalec krmilnikov: HEIDENHAIN TNC 123, Stroj je v zelo dobrem stanju. Takoj pripravljen za uporabo. Hjdpfx Aeyxpraofwoff

Stanje: zelo dobro (rabljeno), Na prodaj industrijska črpalka priznane znamke Grundfos. Model SPK 4-8 – vertikalna večstopenjska črpalka, namenjena za čiste tekočine, hladilne tekočine, industrijske instalacije ter CNC stroje. Tehnični podatki: Hodpeywpahefx Afwsff Proizvajalec: Grundfos Model: SPK 4-8 A-A-A Moč: 0,55 kW Vrtljaji: 2850 obr/min Pretok: cca 3 m³/h Dvižna višina: do 28 m Temperatura tekočine: max. 90°C Država proizvodnje: Danska Stanje: Rabljeno, delujoče. Vidni znaki uporabe (praskice, manjše sledi korozije – glej slike). Vidna razpoka na ohišju pri priključku – ne vpliva na delovanje (priporočamo preverbo s strani kupca).