Stavostroj Vp 200 nakup rabljenega (46.117)

Stanje: novo, Mitsubishi HA200NC-S servomotor, SN 71092, plus encoder OSA104 SN J4AVP3X1875, unused with storage marks, 100% functional, scope of delivery as per photos. Bodpfxorb S Uro Abxsww

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Centauro R-800 + RVP200 Bandsaw Year of manufacture: 2017 Technical data: - Power: 11 kW + 0.55 kW Bwedev T Tc Tepfx Abxew - Speed: 680 rpm - Dimensions (LxWxH): 1550 x 1900 x 2370 mm - Wheel diameter: 800 mm - Maximum workpiece height: 400 mm - Maximum workpiece width: 780 mm - Maximum blade width: 80 x 0.8 mm - Blade length range: 5380 – 5530 mm - Wheel speed: 680 rpm - Table height from floor: 950 mm - Table dimensions: 1060 x 800 mm - Table tilt: up to 15 degrees - Weight: 700 kg RVP200 FEEDER

Stanje: novo, Mitsubishi HA200NC-S servomotor, serial number 8Z055, with encoder OSA104, serial number J4AVP40Z40W. Unused, with storage marks, 100% functional. Scope of delivery as shown in the photos. Bwodjrb Tahopfx Abxew

Stanje: skoraj kot novo (rabljeno), Siemens BT 200 Bus Physics Tester 6SE7181-0AA01-0AA0 Simatic Physical Bus Test Device Profibus-DP Bus Test Unit Manufacturer: Siemens BT 200 Bus Physics Tester Type: Siemens BT 200 New and in original packaging – however, it is being offered as used. For further technical data, please refer to the nameplate in the attached photos. Otherwise, please observe the following notes or call us if you have questions. Thank you. • Condition: Please see the photos; the item was kept in stock as a spare part, comes from a spare parts warehouse, or was dismantled from an existing system. • Further information: Please note that the item may already have been in use. Therefore, there may be scratches, stains, discolorations, or remaining cable harnesses. • The item is offered as used, without any guarantee or warranty. Bwodevai Hbopfx Abxow • Some of our items have been dismantled from fully operational production systems, or they are unused surplus stock. • The items have often been stored for several years and are expressly offered as "used goods", even if they were barely in use or only kept as spare parts. • Deviations in technical data and errors in the description may occur and are subject to change. • Condition/packaging as seen in the photos or as individually agreed upon. • If you have further questions or wish for more photos, please contact us. • For international shipping, please inquire, as shipping costs may vary. • For technical or other inquiries, feel free to contact us at any time. • Viewings or self-collection can be arranged by appointment. Should you have any questions or wish to arrange a viewing, please contact us. Thank you for your interest.

Leto izdelave: 2011, Stanje: dober (rabljeno), Sušilna peč, temperirna peč Caltherm 200 C Naprodaj v odličnem stanju, večnamenska konvekcijska peč z mešanjem zraka za toplotno obdelavo, proizvajalca CALTHERM. Električno ogrevana enokomorna peč z mešanjem zraka. Bedpevu Hvpefx Abxeww Proizvajalec: Caltherm J7172 Leto izdelave: 2011 Notranje dimenzije: Širina: 300 cm Višina: 200 cm Dolžina: 185 cm Maksimalna projektna temperatura: 200 °C Testna temperatura: 200 °C Čas dosega nastavljene vrednosti: 45 min Število grelnih elementov: 12 x 3,6 kW Ventilatorski motor: 15 kW Priporočena skupna električna priključitev: 100 A Tip regulacije temperature: West 6400 Zunanje dimenzije: Širina: 430 cm Dolžina: 330 cm Višina: 300 cm Teža: ca. 4800 kg

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7615 Tehnični podatki: - širina vhoda: 550 mm - višina vhoda: 200 mm - širina osi: 570 mm - dolžina noža: 570 mm - število nožev: 2 kos - mere sita: 60x120 mm - zobata vlečna os, deljena od spodaj - motor spodnje osi: 2,5 kW - zobata vlečna os zgoraj - motor zgornje osi: 2,5 kW - vibracijski kanal: 2,2 kW - dolžina vibracijskega kanala: 3200 mm - širina vibracijskega kanala: 490 mm - glavni motor: 45 kW - avto-reverz - vzvratna vožnja - premer izvoda za odsesavanje: 250 mm - skupne mere stroja dolžina/širina/višina: 2100x2000x1100 mm - skupne mere vibracijskega kanala dolžina/širina/višina: 3200x700x600 mm - teža: približno 3500 kg PREDNOSTI – široka vhodna odprtina – avto-reverz (z možnostjo nastavitve) – vzvratna vožnja – rabljen sekalnik, zelo dobro ohranjen Cena brez DDV: 119900 PLN Cena brez DDV: 28550 EUR, odvisno od tečaja 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih.) Bwjdpjwa Al Nofx Abxjw

Stanje: novo, Leto izdelave: 2022, 28.85 linear meters wide-span shelving, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 28.85 linear meters Shelving offer includes: - 16 x frames, approx. 200 x 60 cm, disassembled - 90 x beams, approx. 185 cm - 45 x shelves, approx. 184.5 x 59.5 cm - Incl. safety pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 3 storage levels - Chipboard, natural finish - Uprights in blue - Brand new, in stock Bwedpfx Ajxrzp Iobxsw - Other quantities available! Pre-assembly of frames is available for a small extra charge of €6/net per piece. Delivery can be arranged at favorable rates—please enquire. -- AVAILABLE IMMEDIATELY IN MULTIPLE UNITS -- Price: €2,360.00 net plus statutory VAT You will receive an invoice with VAT shown. Transport: Delivery can be organized upon request via our partner freight forwarder; costs depend on the postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your requirements... We are happy to support you throughout your project, from planning and ordering to installation.

Leto izdelave: 2023, obratovalne ure: 20 h, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 60 kg, vhodna napetost: 220 V, laserska moč: 200 W, vrsta vhodnega toka: Klimatska naprava, vrsta aktuacije: električni, Tehnični podatki: Laser: pulzni laser Moč laserja: 200W Zračno hlajenje Dimenzije: 60 cm x 28 cm x 75 cm (D x Š x V) – idealno za samostojen transport! Prodajna cena vključuje predstavitev, usposabljanje in po želji tudi podporo po nakupu - Na voljo takoj - Garancija Bwodpfxoxcf D De Abxew Prodaja izključno zasebno, brez posredovanja trgovca – razlog za prodajo je nakup nove naprave! NOVA CENA: 31.500,00 EUR neto CENA PO DOGOVORU: 19.500,00 EUR neto! Možnost financiranja do 6 let!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80796, Stroj je v odličnem stanju, popolnoma delujoč, potrebno ga je razstaviti na lokaciji v Vilni, Litva. Prodajalec nudi razstavljanje, nakladanje na tovornjak ter dostavo. Bwodpfsvddplsx Abxew

Leto izdelave: 2000, Stanje: rabljeno, Punching machine Edel HM 35/350 BKE 200/5 Maximum pressure: 35 t Sheet thickness: 5 mm at 40 kp/mm² Bwsdpfxeg Dgyxs Abxsw

Stanje: zelo dobro (rabljeno), For sale: TIG welder, L-TEC 200 DC, in very good condition. The price is per unit. Bwsdpfx Abjud R T Sexew

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Max saw blade diameter: - On the upper shaft: 340 mm - On the lower shaft: 300 mm - Bore diameter: 80 mm From above: - Kickback devices - 2 pressure slip rolls - Pressure unit - 37 kW saw shaft - 2 smooth slip rolls From below: - Infeed table with guide bar - Kickback devices - Track - 37 kW saw shaft - Track - 1 outfeed smooth slip roll - Pneumatically pressed rollers - Max saw blade diameter: 300 mm - Electric upper body height adjustment up/down: 1.1 kW - Automatic central lubrication - Electrically adjustable, variable feed speed: 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 5000 kg ADVANTAGES – Italian manufacture – Double-shaft – Used multi-blade saw in very good condition Bwjdjkyr H Aopfx Abxsw Net price: 168,900 PLN Net price: 40,200 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Stanje: novo, Leto izdelave: 2022, 28.55 linear meters wide-span shelving, 80 cm deep — workshop shelving, warehouse shelving, large compartment shelving, hand storage shelving, shelf racks, small parts storage. Data: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 28.55 linear meters Shelving package includes: - 16 x upright frames, approx. 200 x 80 cm, disassembled - 90 x beams, approx. 185 cm - 45 x shelves, approx. 184.5 x 79.5 cm - 90 x crossbars/load distributors - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf (with evenly distributed load) - Levels: 3 storage levels - Chipboard, natural finish - Uprights: blue - Crossbars galvanized - All items available ex stock, brand new - Other quantities available! Frame preassembly can be carried out by us for a small surcharge of €6/net per unit. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,887.00 net plus statutory VAT Bodpfsxrzpuox Abxoww You will receive an invoice with VAT stated. Transport: Delivery can be arranged via our partner freight forwarder upon request; costs depend on postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your facility upon request. Our recommendation: Let us know your requirements... We are happy to support you with planning, ordering, and assembly to help you realize your projects.

Stanje: zelo dobro (rabljeno), 4 step clamps Clamping height 150-200 mm (28365) T-slot width 12 mm Bedslnka Iopfx Abxoww Thread M10

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) Bjdpfx Abewc Rk Eoxjww - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, MAZAK INTEGREX 200-III ST, 5-osni stružni center, s/n 174623, z upravljanjem MAZATROL 640MT Pro, razdalja med konicami 1 016 mm (40”), zmogljivost palice 63,5 mm (2,5”), nihaj 660 mm (26”), premer struženja 660 mm (26”), hodi: X - 580 mm, Y - 160 mm, Z - 1 045 mm, nagib glave osi B: 225°, indeks osi C: 0,001°, hitrost vretena (glavno/pomožno) 5 000 rpm, pogonska orodja, hitrost pogonskega vretena 12 000 rpm, 40-pozicijski menjalec orodij (ATC), stožec KM63, pomožno vreteno, regulator temperature olja Oil Matic, transporter za odrezke. Bwedpfx Absu A Dgljxsw

Leto izdelave: 2015, Stanje: dober (rabljeno), Zu verkaufen: Gebrauchte, moderne Bystronic Xpert 200/3100 CNC-Abkantpresse, 200t x 3m Baujahr/Neumaschine: 2015 Arbeitslänge: 3.100 mm / 3 Meter x 200 Tonnen Presskraft: 2.000 kN / 200 Tonnen Max. Hub: 215 mm Achsen insgesamt: 7 Achsen – Y1, Y2, X, X1, R, Z1, Z2 Hydraulische Bombierung Hydraulische Werkzeugklemmung Vom Bystronic UK-Service seit Inbetriebnahme vollständig gewartet Bwedpfogkgwfox Abxsw Nur ein Vorbesitzer seit Neukauf Wenig Betriebsstunden, sehr guter Zustand

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Holder for push-through safety device, used Material finish: Sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Bjdpfsipuggjx Abxoww Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm For rectangular tube: 50 x 30 mm Weight per unit: 0.930 kg

Stanje: novo, Leto izdelave: 2022, 57 running metres of widespan shelving, 80 cm deep – workshop shelving, warehouse shelving, large compartment shelving, hand-picking storage, shelf racking, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 57 running meters Shelving package consists of: - 031 x frames approx. 200 x 80 cm, disassembled - 240 x beams (crossbars) approx. 185 cm - 120 x shelf panels approx. 184.5 x 79.5 cm - 240 x support rails/load distributors - Incl. safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per compartment, with evenly distributed load - Levels: 4 storage levels - Particle board, natural - Uprights blue - Support rails galvanized - New stock available ex warehouse - Other quantities available! We can pre-assemble the frames for a small additional charge of €6/net per unit. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €7,267.00 net plus statutory VAT You will receive an invoice with VAT separately shown. Transport: Delivery can be arranged on request via our partner forwarding agent; delivery charges are dependent on postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your requirements... We are happy to support you with your projects—from planning and ordering, right through to assembly. Bjdpfx Abexrzphoxoww

Stanje: zelo dobro (rabljeno), Step clamp (28366) Clamping height: 200 - 250 mm T-slot width: 12 mm Bedpfx Aoln Ulaebxsww Clamping screw: M10 4 pieces available Weight: 8.5 kg

Leto izdelave: 2020, Stanje: novo, We are offering you a new shelf connector from the manufacturer Nedcon NS for sale. The delivery scope includes: 01x SET Spacer NR, new Length: 200 mm Material finish: sendzimir galvanized Bedpfx Abof S Iq Tsxjww consisting of: 01x Spacer NR L=200, sendzimir galvanized 02x Hexagon bolts 8.8, M10x25, galvanized 02x Serrated flange nuts, hexagon 8.8, M10, galvanized 04x Hexagon bolts, M10, galvanized

Stanje: novo, Leto izdelave: 2022, 57 linear meters of wide-span shelving, 60 cm deep, workshop shelving, warehouse shelving, large compartment shelving, manual storage, shelving units, small parts storage, Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 57 linear meters Shelving package includes: - 031 x frames approx. 200 x 60 cm, dismantled - 240 x beams approx. 185 cm - 120 x shelf panels approx. 184.5 x 59.5 cm - Including safety pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per compartment, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights blue - New stock, available ex warehouse - Other quantities available! Pre-assembly of frames can be provided by us for a small additional charge of €6.00/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €5,885.00 net plus applicable VAT You will receive an invoice with stated VAT. Transport: Delivery can be arranged by our partner forwarding company upon request. Costs depend on postal code. Assembly: Our trained staff will be happy to assist with the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements… We are happy to support you with your projects—from planning and ordering to assembly. Bjdpfxexrzpbe Abxsww

Stanje: dober (rabljeno), Power chuck 200 mm diameter Bwsdpfx Abscr S Eusxow

Stanje: novo, Leto izdelave: 2022, 57 running meters of wide-span racking, 80 cm deep, workshop racks, storage racks, large compartment shelving, manual storage, shelving systems, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 57 running meters Rack package includes: - 031 x frames approx. 200 x 80 cm, disassembled - 180 x beams approx. 185 cm - 090 x shelf boards approx. 184.5 x 79.5 cm - 180 x support bars / load distributors - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per compartment (evenly distributed load) - Levels: 3 storage levels - Chipboard shelves, natural finish - Blue uprights - Galvanised support bars - Brand new, ex-stock - Other quantities available on request! Pre-assembly of frames can be carried out by us for a small surcharge of €6 net per unit. -- AVAILABLE FOR IMMEDIATE DELIVERY IN MULTIPLE QUANTITIES -- Price: €5,737.00 net plus statutory VAT An invoice with VAT shown will be issued. Shipping: Delivery is available on request via our partner forwarding company; shipping costs depend on your postcode. Installation: Our trained staff is available to assist with the professional assembly and disassembly of your facility as needed. Bsdpexrznwjfx Abxeww Our recommendation: Let us know your requirements… We are happy to support you with your project – from planning and ordering through to installation.

Stanje: novo, Leto izdelave: 2022, 13.35 m Longspan Shelving System 80 cm Deep, Workshop Shelving, Storage Shelving, Large-Compartment Shelving, Manual Storage, Shelf Racking, Small Parts Storage Technical Data: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 13.35 m The racking offer consists of: - 08 x Uprights approx. 200 x 80 cm, disassembled - 56 x Beams approx. 185 cm - 28 x Shelves approx. 184.5 x 79.5 cm - 56 x Crossbars / Load distributors - Including locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 4 storage levels - Particle board, natural finish - Uprights blue - Crossbars galvanized - New from stock - Other quantities available! Pre-assembly of the uprights can be carried out by us for a small extra charge of €6 net per item. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,724.00 net plus statutory VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner forwarding company upon request; shipping costs depend on your postal code. Bedexrznqjpfx Abxoww Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to support you with the realization of your project, from planning and ordering to complete installation.