Stanko 1A616 nakup rabljenega (36)

Stanje: dober (rabljeno), Leto izdelave: 1973, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 1.250 t, hod: 220 mm, širina mize: 260 mm, dolžina mize: 820 mm, globina grla: 700 mm, skupna dolžina: 6.400 mm, skupna širina: 4.365 mm, skupna višina: 3.760 mm, skupna masa: 135.000 kg, obratovalni tlak: 7 letvica, pritisk: 7 letvica, Nazivna sila prebijača: 12.500 kN / 1.250 ton Maksimalni premer obdelovanca: 140 mm Maksimalni premer prebijene prirobnice: 180 mm Hsdpfx Aouby N Dsg Aenu Hod prebijača: 460 mm Neprekinjeno število praznih hodov na minuto: 35 Moč elektromotorja: 75 kW Skupne mere: - Dolžina-Širina: 6.400 mm - Spredaj-Zadaj: 4.365 mm - Višina: 3.760 mm Skupna masa, približno: 135.000 kg.

Stanje: rabljeno, Technical details: Weight: 150 kg Dimensions: L:280 x W:240 x H:180 mm / per clamping claw Hnsdpou N E Azjfx Ag Asu For sale are these 4x clamping claws (Spannpratzen). Application: Workpiece clamping for turning and drilling operations Cast steel construction Workpiece holding area: Clamping surface WxH: 70 x 65 mm, for internal and external clamping, clamping travel 250 mm Base mounting: Surface L x W: 280 x 240 mm, 4x clamping bolts M24 Includes: 4x T-slot bolts per clamping claw, and socket wrench for 24 mm square

Stanje: rabljeno, Technical details: Table length: 3600 mm Table width: 3600 mm Table load capacity: 50 t Table travel: 2000 mm longitudinal Table height above floor: 1350 mm Table speed: approx. 1000 mm/min Table rotatable: 360° Total power requirement: 14 kW Machine weight approx.: 38.5 t Machine dimensions approx. LxWxH: 5.5 x 3.7 x 1.4 m Space required approx.: 6.2 x 3.7 x 1.4 m Main applications: - For multi-sided machining - Supplementary equipment for travelling column milling machines or boring mills Equipment: - With digital position measurement system for X-travel and rotation - Control via operator panel - Clamping plate (boring table), weight: 14 t (11 T-slots according to DIN 650: a=42 mm; h=75 mm; b=70 mm; c=31 mm) The boring/rotary/milling table has been mechanically and electrically overhauled. The following works have been carried out: - Integration of a digital position measurement system for the X-axis and an encoder for the C-axis - Integration of control via an operator panel - Renewal of hydraulic pipes/hoses, fittings, pressure gauges, flow restrictors, and filters - Replacement of both axis gear bearings - Renewal of axis gearbox seals - Control cabinet and complete machine wiring renewed - Limit switches cleaned, checked, set, and defective switches replaced - Frequency inverter retrofitted for stepless speed adjustment - Cracked gearbox housing repaired with cast iron locking - Renewal of way wipers (refurbishment of way covers including new wipers) - Feed gearbox cleaned and newly sealed - Feed motor completely re-bushed - New paintwork Hnsdpju N D Rqsfx Ag Aou The boring mill table / rotary table can be demonstrated under power. Please refer to our demo video to see it in operation as offered!

Stanje: zelo dobro (rabljeno), Tool holder inserts Brand: Stanko/Sedin Hnsdsvmf Axepfx Ag Aou For data, see images

Stanje: rabljeno, Leto izdelave: 1972, Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,000 mm Spindle speeds: 12.5 - 2,000 rpm Spindle mount: Bayonet 55022 Spindle bore: 47 mm Feeds – longitudinal: 0.07 - 4.16 mm/rev Feeds – cross: 0.035 - 2.08 mm/rev Metric threads: mm pitch Imperial threads: 2 - 24 TPI Rapid traverse – longitudinal/cross: 3.4 / 1.7 m/min Spindle motor: 11 kW Drive power: 13 kW Machine weight: approx. 2.8 t Space requirements: approx. 2.8 x 1.2 x 1.5 m 3-jaw chuck diameter: 250 mm Hsdpevzhhyjfx Ag Ajnu 4-jaw chuck diameter: 200 mm Two-axis digital readout ANILAM WIZARD LATHE – retrofitted in 1992

Stanje: novo, Leto izdelave: 2026, Machine in AS-NEW condition! Geometry acceptance as per DIN8609 12-month warranty covering all damages Control: conventional/PLC Siemens faceplate control 4-axis digital display: Fagor/ACU-RITE or Heidenhain Complete electrical equipment 230/400V, 50Hz, German make, CE compliant Technical data: Max. workpiece dimensions: - Diameter (mm): 3,200 - Height (mm): 1,600 (up to 2,600 possible*) Max. workpiece weight (kg): 16,000 Faceplate diameter (mm): 2,800 Hsdjcht Tnopfx Ag Aenu Max. stroke length: - Horizontal (mm): 1,720 - Vertical (mm): 1,200 Number of faceplate speed stages: 18 Faceplate rotational speeds PLC Siemens or stepless (2 stages) Lenze control (rpm): 1.6–63 / 0–80 Cross slide feed range: 18 stages Crossrail traverse speed (mm/min): 360 Max. rapid traverse of support (mm/min): 2,000 Max. faceplate torque (kN/m): 67 Main drive power (kW): 55/75 Dimensions (LxWxH, mm): 5,490 x 7,075 x 5,100 Weight (kg): 43,000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, Drilling capacity Ø 50 mm, table size 1000x1640 mm, spindle taper MK-5, quill stroke 400 mm, quill diameter 80 mm, arm reach 1600 mm, max. installation height table to drill quill 1600 mm, 21 speeds 20-2000 rpm, geared transmission, motor 4 kW, dimensions 2700x1100x3430 mm, approx. 4800 kg, with coolant system, double cube 800x800x800 mm, hydraulic clamping. Hnjdpfed Sw N Asx Ag Aju

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Reach: 410 mm Machine dimensions (approx. LxWxH): 1.15 m x 0.8 m x 2.0 m Hnjdpfsu Niu Uox Ag Asu Vertical bandsaw with bandsaw blade welding device The table is tiltable.

Stanje: rabljeno, Univerzalna izdolbna glava STANKO Hnjdpfxsxciv Do Ag Aju Vreteno orodje, vretenasta glava Orodni nosilec: SK 40 - M16 Sprejem nastavitvene puše: Ø 36 mm Obseg nastavitve: 17,5 mm Natančnost nastavitve: 0,01 mm Steblo orodja: Ø 18/22 mm Obdelovalni premer: ca. 10-45 mm - Adapter SK40 za nastavitveno pušo Ø 36 mm - Izdolbna glava z nastavkom puše Ø 36 mm Lastna teža: 5 kg zelo dobro stanje

Stanje: rabljeno, Slotting head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No.: 200 Year of manufacture: 1974 Stroke length: max. 60 mm Strokes: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing on machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke length adjustable via eccentric adjustment - Drive is the same as for the regular vertical head, powered by the machine gearbox - Drive via driver, concentric to the centering diameter - Degree scale on the flange plate, continuously swivels +/- 45° Hodjd Dk A Ajpfx Ag Aonu - This slotting head is mounted in place of the standard vertical milling head / milling head (Installation instead of the vertical milling head, milling head) Weight: 42 kg Good condition Slotting head inventory no. 58166 and vertical milling head inventory no. 58164 from identical STANKO milling machines.

Stanje: zelo dobro (rabljeno), Spherical Roller Bearing - Bearing type: Spherical Roller Bearing - Bore: Ø 110 mm - Outer diameter: 200 mm - Width: 53 mm Hodpfx Agsb A Iq Sj Ajnu - Weight: 7.5 kg