Skrči Film nakup rabljenega (1.457)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 530 mm, Houfek Planer-Thicknesser SC 530 Standard configuration: Motor 5.5 kW (7.5 HP) Hedpfxewvaqzo Agijnk Total table length of the planer SC 530 – 2350 mm Simultaneously tiltable planer tables Fence dimensions 1300 x 150 mm Fence tilting angle 0°–45° Thicknesser table length – 1000 mm Manual lift adjustment of thicknesser table Mechanical digital display of table position 4-point table mounting for thicknesser table Split infeed pressure segments Grooved infeed roller Outfeed roller Min./max. workpiece thickness 3–250 mm 4-knife cutterblock, D=120 mm Automatic star/delta motor starting Feed speeds 6/12 m/min Electromagnetic brake Voltage 400V/50Hz Standard delivery wrapped in PE foil Machine built according to CE power and safety standards Additional equipment (installed on this machine): Motor 7.5 kW (10 HP) for SC 530 Split grooved feed roller Tiltable cutterblock guard Tiltable auxiliary fence Motorized thicknesser table adjustment with two-speed motor Electronic measurement of thicknesser table position with digital display “Tersa” cutterblock for 530 mm Precision-ground planer table Precision-ground thicknesser table

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Hydraulic veneer press with electric heating plates • Bottom-cylinder design • BUSSE electric heating plates • Central control panel with all operating elements • Analog temperature display for both heating plates • Pressing pressure infinitely adjustable via pressure switch unit • Main switch • Two-stage hydraulic pump with automatic switching valve from low to high pressure • Safety pull cord Hjdoyyn Rdopfx Agijnk • Rack compensation • CE compliant Pressing area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirements (L x W x H) approx.: 2900 x 1250 x 1900 mm Weight: approx. 3,800 kg More information on request NEW MYLAR FOIL on both heating plates NEW Hydraulic cylinder seals Used machine notice: • Subject to errors in technical details and prior sale. • Prices stated are ex works – free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no claims to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA55, Machine overview The ATLANTA COMBIGIOTTO 90-M is a fully automatic inline packaging machine that collates containers into bundles and then packs them on a corrugated tray with film overwrap. The machine is configured for wrap + film on tray applications and operates with straight-line (inline) product infeed. It is suitable for a wide range of container formats from 0.5 L to 10 L, typically handling PET, glass, or HDPE bottles, cans, and similar rigid containers. The unit was built in 2008 and underwent a complete refurbishment in 2022. It is classified as operational. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray pack with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container feeding system (to be provided by the line integrator) Year of manufacture: 2008; Refurbished: 2022 Typical process sequence: Product collation in-line; picking and forming of tray blanks around the collated bundle; application and sealing of neutral film; discharge for downstream handling. This configuration ensures robust tray stabilization with protective film overwrap, suitable for distribution and palletizing. Technical data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operational status: Ready for operation Packaging configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine infeed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (refurbished 2022) Automation & Control Industrial PLC-based control system with HMI for recipe management and setpoint control (format parameters stored for repeatability). Hedpjxdnbzofx Agionk Speed control via frequency inverter/servo drives for synchronization of infeed, collation, tray wrapping, and film application. Integrated diagnostics, alarm history, and counters (shift/lot totals). Typical sensors: product presence, jam detection, film roll end, tray blank level, safety interlock status. Electrical protection class: IP54 for the electrical system and motors. Line Integration Container infeed: Not supplied with the machine. The packaging machine requires a stable, synchronized infeed from the line (accumulation/gap/divider to be supplied by the line integrator). Inline design simplifies integration with fillers, labelers, and downstream conveyor equipment. Standard interface signals (typically): machine ready, run enable, emergency stop loop, fault, upstream/downstream handshake. A detailed I/O list can be coordinated during integration. Discharge prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be specified as part of the project layout). Condition & Maintenance Overall status: Ready for operation. General overhaul completed in 2022 to restore full functionality. Recommended preventive maintenance: periodic inspection of film path and sealing units, collation guides, tray magazine mechanisms...

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA56, Machine Overview Automatic tray and film packer ATLANTA COMBIGIOTTO 90-M, designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product in neutral shrink film, afterwards passing the bundle through a shrink tunnel to produce stable, retail-ready packs. Ideal for beverage lines processing PET, glass or HDPE bottles. Reference No. FA56. Year of manufacture 2008, overhauled in 2022. Condition: Ready for operation. Expected output up to 25 bundles/min, depending on product and format. Operating Principle: Automatic grouping of bottles, tray forming/loading, film wrapping and consolidation in the shrink tunnel. Packaging Configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy integration with existing conveyor systems. Key Technical Data Brand / Model: ATLANTA COMBIGIOTTO 90-M Operating Mode: Automatic Infeed/Outfeed Alignment: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal Capacity: up to 25 bundles/min (depending on format/product) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Hnjdpfx Aox H Thzogiek Industrial PLC-controlled system with operator HMI for recipe selection, speed setpoints, and diagnostics. Inverter-driven drives for smooth acceleration and product handling. Optoelectronic sensors for product presence, faults, and film detection. Shrink tunnel with temperature control for consistent film application. Locked access doors with safety monitoring for protected zones. Line Integration Infeed: Accepts bottles from conveyor with 90° transfer into the feeding area; integrated selection/divider functions to create pack patterns prior to tray loading. Outfeed: Discharge conveyor after shrink tunnel for connection to inspection, carton handling, or palletizing. Signals and handshakes typically include start/stop, faults, emergency stop, and speed reference. Mechanical interface and layout diagrams available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine delivered ready for operation. Preventive maintenance recommended: regular checks of film path, cutting/sealing components, tray forming kits/generators, lubrication, and wear parts of conveying systems. Performance & Versatility Suitable for a wide range of cylindrical or square bottles common in beverage production. Typical bottle pack patterns (e.g. 2×2, 3×2, 4×3, etc.), depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray adds strength and stacking stability. Consistent bundle quality through controlled film wrapping and thermo-shrinking process. Site Requirements Power supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and protective ground). Auxiliary systems: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC.

Stanje: rabljeno, stiskalna sila: 100 t, širina mize: 1.350 mm, dolžina mize: 2.550 mm, skupna dolžina: 3.150 mm, skupna širina: 1.550 mm, skupna višina: 2.150 mm, skupna masa: 5.000 kg, No. 04525 Veneer Press Ott 300 K 2513 Used Very robust design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Panel dimensions: 2550 x 1350 mm (L x W) Total pressing force: 100 tons Heating: electric, replaceable heating elements Heating plates made of solid aluminium, covered with Mylar film Maximum temperature: 150°C Specific pressing pressure: 3.0 - 5.0 kg/cm² Hnedpfxoy Aplze Agisk 4 press cylinders, each with 90 mm diameter Rack and pinion guide for press table Push-button operation for opening - closing - stop All-round emergency pull-cord with two-hand control setting Infinitely variable opening up to approx. 420 mm Automatic pressing pressure control via high-pressure manometer Pressure preset table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm (L x W x H) Weight approx. 5000 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended The sale takes place as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Leto izdelave: 2010, obratovalne ure: 10.000 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 443, Uporabljena na biomedicinskem področju za termoformiranje blistrov. Širina spodnje folije 320 mm, širina zgornje folije 300 mm, vakuumska črpalka. Hnsdpfxsx H Tcfo Agiok

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Hedpfefh Tmmex Agijnk Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Leto izdelave: 2008, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 209-76-08, PKT S.r.l. / Vertical Packaging Machine – Industrial Packaging System for Pellets or Bulk Materials TMG / Automatic Palletizing Line SIAT / M.J. MAILLIS Automatic Stretch Wrapper For sale: PKT / EK44 vertical packaging machine, previously operated in a pellet production facility. Robust, reliable construction designed for continuous industrial use – ideal for packaging pellets, wood chips, or other bulk materials in bag sizes from 1 to 30 kg, with a maximum output of 6 tonnes per hour. The unit has been tested under operational conditions, is in working order and comes with complete documentation. Vibrating Sieve PKT - Automated Bagging Machine - up to 6 t/h capacity - 1–30 kg/bag - compatible with various bag sizes - operates from film roll stock - supports both continuous and sensor-marked labeling TMG Automated Palletizer - maximum pallet size: 110 x 120 cm - equipped with pallet magazine - freely programmable stacking patterns (20 programmable positions) - suitable for handling both boxes and bags SIAT / M.J. Maillis Group – Stretch Wrapping Equipment - maximum pallet size: 110 x 120 cm - reliable, uncomplicated operation Hodpfx Agjy Ddf Sjienk - wraps incoming loads of different sizes consecutively without the need for adjustments

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 400 h, največja širina izdelka: 450 mm, delovna širina: 450 mm, Širina materiala 450 mm Širina tiska 445 mm Jumbo kolut D 1000 mm Dolžina tiska 228,6 mm do 609,6 mm 8 fleksotiskarskih enot 8 UV kaset 2x vroče zračno sušenje Največja hitrost tiska 150 m/min Predhod tiskarske enote +/- 4 mm Širina izseka 450 mm Dolžina izseka od 304,8 mm do 609,6 mm Navijalni premer D 800 mm Materiali za tisk: Samolepilne etikete (papir, PET, BOPP, PVC) Papir od 30 do 200 g/m² Film od 20my (BOPP), 35my PVC/PET, shrink 12my PET Karton do 400 g/m² Oprema: 16 tiskarskih valjev 8 anilox valjev 1 izsekovalni valj 1 korona obdelava IEEC (enostranska) 1 Meech čistilec traku (dvostranski) 2 izsekovalni enoti Opcijsko 1 obračalni križ 1 Delam/Relam enota 1 odvijalnik za coldfoil 8 LED sušilnih kaset GEW Hnjdpfxoqa Ax Ne Agiek Z veseljem vam pripravimo ponudbo.

Stanje: rabljeno, The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput ranges between 500 kg and 1,000 kg/h. The plant consists of: Hedpfx Aey Auryogijnk • Feed conveyor belt • Load-dependent control system for the feed belt • Metal detector coil • HERBOLD cutting mill, type SMS 45/100-H5-3 • Pneumatic material transport to the buffer silo • Plastcompactor unit HV-70, which comprises buffer silo feed screw, plastcompactor, central blower, and cooling circuit • HERBOLD secondary cutting mill, type SML 45/100-S4-2 • Intensive cooling system • SZS II 630/200 conveying blower • Screening machine • Fines recirculation to the compactor silo • Material conveyor type MFT with Big Bag station and automatic diverter valve to on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.

Stanje: rabljeno, The HERBOLD Plastcompactor is a system designed for the agglomeration of films, fibers, shavings, dust, and flakes. It transforms poorly free-flowing waste into agglomerate with high bulk density and good flow properties, making it suitable for direct feeding into extruders and injection molding machines. The unit for sale is equipped with a main drive motor rated at 110 kW and offers a throughput capacity of 600 to 2,000 kg/h, depending on the input material. All thermoplastic plastics can be processed, including delicate materials such as PET, PA, and bioplastics, which can be agglomerated without thermal damage or discoloration. The system comprises the feed device with silo, the compactor, a secondary cutting mill with screening, and fine material recirculation. Upon request, a pre-shredding solution tailored to your specific requirements can be offered. Trials for suitability and sampling can be conducted in our technical center. We are the manufacturer of this equipment and can ensure reliable service and spare parts supply. Hnedpfsy Aurmsx Agijk The system is available for immediate delivery!

Stanje: rabljeno, Suitable for pre-shredded plastic waste (rigid plastics, films), Throughput depending on material type approx. 0.5–2 t/h Drive power 30 kW A total of four dryers of this model are available. Hodpey Aurgjfx Agionk

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Pogonska moč: 55-90 kW, odvisno od zahtevane zmogljivosti in naloge Hnedpoy Aubhofx Agiek Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev, folije Zmogljivost: 800-2500 kg/h, odvisno od vhodnega materiala

Stanje: rabljeno, The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput ranges between 500 kg and 1,000 kg/h. The plant consists of: • Feed conveyor belt • Load-dependent control system for the feed belt • Metal detector coil • HERBOLD cutting mill, type SMS 45/100-H5-3 • Pneumatic material transport to the buffer silo • Plastcompactor unit HV-70, which comprises buffer silo feed screw, plastcompactor, central blower, and cooling circuit • HERBOLD secondary cutting mill, type SML 45/100-S4-2 • Intensive cooling system • SZS II 630/200 conveying blower • Screening machine Hnodpey Auawofx Agiek • Fines recirculation to the compactor silo • Material conveyor type MFT with Big Bag station and automatic diverter valve to on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.

Stanje: rabljeno, moč: 160 kW (217,54 KM), Rezkalni mlin DREHER 26/90 / Rezkalni mlini Stroj je opremljen z brušenimi noži in je primeren kot mlin za izsekane mreže in folijske trakove. Hsdpfsy At Tcsx Agienk Tehnični podatki stroja: Pogon: 7,5 kW Noži rotorja: 5x3 Noži statorja: 2x2 Premer rotorja: 260 mm Širina rotorja: 900 mm Z valjčnim podajalnikom

Stanje: rabljeno, Press screw REG-MAC Hnsdpfx Agey At Hceijk for drying films and fibers, and for compacting foam material (e.g. Styrofoam, EPS) Drive motor 55 kW

Stanje: rabljeno, Suitable for pre-shredded plastic waste (rigid plastics, films), Throughput depending on material type approx. 0.5–2 t/h Hedjy At A Repfx Agionk Drive power 30 kW A total of four dryers of this model are available.

Stanje: rabljeno, moč: 160 kW (217,54 KM), Rezkalni mlin DREHER 26/90 / Rezkalni mlini Stroj je opremljen z brušenimi noži in je primeren kot mlin za izsekane mreže in folijske trakove. Tehnični podatki stroja: Pogon: 7,5 kW Noži rotorja: 5x3 Noži statorja: 2x2 Premer rotorja: 260 mm Hedpfx Ajy Atxrogionk Širina rotorja: 900 mm Z valjčnim podajalnikom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Laminating press from 1998. This Bürkle EKMH 1300 features a working width of 1300 mm and is equipped with a new Siemens Simatic KMG Touch control system. Included are a Bürkle GLK calender, a film holder, a saw for trimming excess material, and two GWK temperature control units. If you’re looking for high-quality laminating solutions, consider the Bürkle EKMH 1300 laminating press we have for sale. Contact us for more information about this machine. • Condition: Used machinery, not overhauled, sold without warranty • Costa wide belt sanding machine, type KK7 CT CT 1350 (2018) • Bottom sanding unit: contact roller, electronic pad sanding unit, cleaning brush, intermediate conveyor belt approx. 3000 mm • Top sanding unit: identical equipment • IMA double-end tenoner, type FBA/II/740/A (2018) • Scoring saw (bottom), rip saw, hogger, prism cutter, jointing cutter, cross-edge milling unit, 3 profiling milling units, brushes • Bürkle glue application unit, type DAK1300 (1992) • Bürkle laminating machine, type EKMH 1300 (1998) • New Siemens Simatic KMG Touch control, Bürkle GLK calender Hsdpfxsy Dr Hqe Agienk • Film holder and trimming saw • Working width 1300 mm • Homag postforming machine • 2 saw units (horizontal and vertical) • 2 identically configured processing sides with gluing • Pressure zone with rotary magazine for different profiles • Various milling units and buffing brushes • IMA panel processing and edge banding line, type Combima 17/52/R75/3580:950 (2018) • Equipped with 50 machining units • Cleaning of workpieces at the line end • Kraft machining center • Kraft hardware insertion machine for doors, type CTF91 (2006) • Drilling machine for door hinges with milling units for lockcases and door handles • Untha shredder, type RS30 (2021) • Power 22 kW, operating hours 155 h Additional equipment • Handling, loading, transport, buffering • Kraft portal loader (2019): vacuum lifter, 2 feed roller conveyors, 1 transport roller conveyor • Kraft roller conveyor system (2019): 3 single elements, centering station • Feed belt and alignment station for IMA double-end tenoner • Kraft feed conveyor for laminating line (2019) • Kraft infeed table for laminating line (2019) • Discharge conveyor (laminating line) • Conveyor and buffer system (Kraft, 2018): approx. 43 m powered roller conveyor, roller width approx. 1000 mm, 3 automatic cross transfer carts • Portal loading with rotating vacuum portal (for IMA Combima line) • Portal system for stacking on 3 different roller conveyors (for IMA Combima line) • Kraft portal destacker: vacuum portal with 3 destacking stations • Automatic Kraft cross transfer cart (2018): roller width approx. 1400 mm, roller length approx. 2800 mm • Conveyor belt with inspection system: pivoting arm with vacuum suction; visual inspection station • Intermediate buffer with 4 levels and feed to postforming machine • Infeed table for postforming machine • Portal loader with vacuum lifter (for machining center) • Process auxiliaries • GWK Eco 03A glue melting unit • PU pre-melters Nordson / VersaBlue (years 2020 and 2004) • 2 GWK temperature control units • 2 BEKO Bekoblizz LC cooling units (years 2020) • Steel platform with staircase and various pumps (for glue application unit) • Extraction, cleaning, workshop equipment • Schuko mobile extraction unit, type ObiS3 (2015), 2.2 kW • Nilfisk Attix industrial vacuum cleaner

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, stiskalna sila: 962 t, hod: 200 mm, širina mize: 1.400 mm, dolžina mize: 2.750 mm, delovna širina: 1.400 mm, obratovalna temperatura: 135 °C, obratovalni tlak: 290 letvica, višina obdelovanca (maks.): 200 mm, teža obdelovanca (maks.): 250 kg, premer cilindra: 270 mm, širina odpiranja: 200 mm, širina plošče: 1.400 mm, pritisk: 25 letvica, temperatura: 150 °C, We are offering this used ITALPRESSE MARK C/14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level, continuous cycle press system with top-mounted hydraulic cylinders Machine in perfect working condition CE safety standards compliant The machine can also be purchased together with other machines for a complete production line. Heated plate dimensions: 1400 x 2750 mm Number of heated plates: 2 pcs. Number of levels: 1 pc. Cylinder stroke: 200 mm Opening height: 200 mm Loading side: 1400 mm Specific pressure at 100%: 25 kg/cm² Total pressing force: 9620 kN Cycle time: 2–30 min Working temperature: 135°C Max. working surface temperature: 150°C Hjdpfeyxp Twox Agienk Designated heating medium: thermal oil Number of pressing cylinders: 6 pcs. Diameter of pressing cylinders: 270 mm Retraction cylinders: 4 pcs. Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover size: 1200 x 2400 mm Moulds are excluded from this offer Available at additional cost Powered feed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8–40 m/min Photoelectric sensor control Electropneumatic vibrating device for the upper Mylar sheet Electronic flatness control Automatic switching to pressing speed Compressed air device in lower press table Cylinder base plates are insulated and drilled from solid material for water cooling Frequency control of feed speed Powered discharge roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet/control panel with Siemens S7 PLC Dismantling and collection at buyer's own expense Pickup location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or call us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 616, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 240 V, priključek za stisnjen zrak: 6 letvica, širina folije: 480 mm, vhodni tok: 16 A, Naprodaj je blister stroj ILLIG HSA 50 C, letnik 1991. Gre za visokozmogljiv avtomatski pretočni stroj za varjenje blisterjev s podajalcem kartic za debeline folije od 150 µm do 400 µm (morda tudi več, vendar ni osebno preizkušeno). Linija se prodaja kot celota (glej slike). Hitrost: 1–9 ciklov/min pri štirikratnem izkoristku. Primer: dozirnik dišave, 4 uporabniki na blister paleto = 2000 blisterjev/uro. Dimenzije približno 9 m x 1 m x 2,25 m. Velikost varilne palete: 57x32 cm. Stroj je 100 % funkcionalen in je še vedno v uporabi. Ogled in testno delovanje pred nakupom možno. Lokacija: Češka (10 min čez bavarsko/češko mejo pri Furth im Wald). Hnjdpfxsy Anifj Agiok

Stanje: novo, številka stroja/vozila: GSH, The ZERMA granulators of the GSH series are exceptionally robust machines designed for the most demanding applications, tailored to meet the versatile requirements of modern recycling operations. Constructed from heavy-duty steel weldments, the housings withstand even extraordinary stresses. Bearings, knife mounting, and rotor shafts are significantly oversized, making them extremely durable. By simply reconfiguring the setup, massive lumps and thick-walled pipes, as well as hollow bodies and films, can be processed effortlessly. Depending on the specific application (including for temperature-sensitive materials), different rotor designs are available. However, all share a common feature: advanced and superior V-cut technology. All machines in the GSH series consistently deliver high-quality granulate, whether from bottle crates, profiles, sheets, films, start-up lumps, or pipes. They are economical, highly reliable, easy to clean, and feature a long service life. Hnedeyr Thdjpfx Agisk When combined with ZERMA's comprehensive range of options, accessories (such as extraction systems, conveyor belts, metal detectors, fine material separators, roller feed systems, etc.), and spare parts, you receive a customized and optimized shredding system. The benefits include significantly reduced costs, time, and personnel requirements. Innovative Housing Design The housing is split diagonally in the middle, and the upper section with infeed hopper can be opened hydraulically to provide full access to the rotor for tool changes and cleaning. The screen insert is also held by a hydraulically tilting basket, offering optimal accessibility for screen removal and installation. The screen insert is reversible. Robust External Bearing Design Another well-conceived design feature is the externally mounted bearing assembly. Heavy-duty roller bearings in steel housings ensure long service life and are ideal for the toughest applications. The external bearings prevent grease from entering the cutting chamber and, conversely, prevent granulate or fine particles from entering the bearing assembly. This presents a significant advantage, especially during wet operation. Flywheel To compensate for shock loads during granulation, an optional flywheel is available. The rotors come standard with a secondary shaft end for this purpose. High Operational Safety All granulators comply with EU machinery directives and are CE-certified. Safety features include, for example, run-down guards with limit switches and hydraulically unlockable check valves.

Stanje: novo, In every calculation relating to the economy and public life, waste transport is a key factor. Here, it is not so much the weight but rather the volume that matters. The constantly rising transport costs for this waste are increasingly becoming an economic problem. Waste disposal of large quantities of polystyrene or packaging film is particularly important in retail environments. The VOLUME REDUCER achieves a volume reduction of up to 80 percent at this stage. Bottles of any kind and size, e.g. sparkling wine bottles, can be shredded easily without the need for a pressing device. It is also possible to unpack expired food products. Furthermore, rejected items such as pharmaceuticals, data carriers, or counterfeit products can be rendered unusable. Food residues and organic waste, even bones, can be shredded, collected, and converted into electricity and heat in biogas plants using the VR60. Consider, for example, a reverse vending machine for deposit bottles. The PET bottles are compressed and, due to the barcode, secured until collection. By deploying the VOLUME REDUCER, the barcodes on PET bottles can be rendered unrecognizable, allowing for significant volume reduction. The shredded bottles can subsequently be collected in a large container, eliminating the need for daily collections from return points. The vertically moving, wear-free knives of the shredder ensure quiet and blockage-free operation. ALL ADVANTAGES AT A GLANCE - Non-rotating shredder - No material wrapping due to non-rotating knives - Automatic feed via knife movement - V-shaped automatically reversing knives prevent jamming or stalling - Fast component replacement through modular design - Intelligent control via compact logic system (PLC) - One-button operation - Optional material discharge via conveyor belt - Shredder module can be integrated into existing systems - Low knife wear and low maintenance costs due to highly wear-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL - Dimensions: 90 cm x 70 cm x 85 cm - Weight: approx. 190 kg Hsdpfx Aeyr I H Usgijnk - Power consumption: 3 kW - Connection rating: 400 V three-phase current

Stanje: novo, številka stroja/vozila: Baureihe GSC / Neumaschine, The compact granulators of the GSC series are fully sound-insulated granulators, making them particularly quiet in operation. The integrated soundproofing, thanks to its well-thought-out design, ensures ideal accessibility to the granulator itself as well as for knife and screen changes. The noise protection is based on the use of state-of-the-art sound insulation materials. The housings are manufactured from a robust steel-welded construction, which, in combination with the V-cut rotors (except for GSC 300/300), ensures a long service life and universal applicability. The tangential housing geometry allows the rotor to effectively accept and process even bulky feed materials. All machines in the GSC series consistently deliver high-quality regrind, regardless of whether the feed material consists of injection or blow moldings, profiles, sheets, or film. The GSC series models are cost-effective, highly reliable, easy to clean, and offer a long service life. Integrated Sound Insulation: The integrated sound insulation ensures a pleasant working environment with low noise levels. The optimized design guarantees ideal accessibility to the machine. Hnedpfxoyr I E Dj Agiok Mobile Compact Design: The integrated sound insulation makes the granulators compact and mobile. The machines can be moved to any desired location using a pallet truck or forklift. ZERMA offers a wide range of options such as extraction systems, conveyors, metal detectors, and fine material separators.

Stanje: rabljeno, Hego prečna rezalna linija Delovna širina 500x2mm Hitrost 10-12m/min Mehanski odvijalnik maks. 1000kg Notranji premer koluta 400/508mm Ravnalni stroj z 9 ravnalnimi valji in 2 podajalnima valjema ter odvijalec folije Hnjdpfxjvk D Alo Agijk Ponudba je namenjena izključno poslovnim subjektom v skladu z §14 BGB Prodaja zasebnikom ni mogoča!