Scm Tech 99 nakup rabljenega (613)

Stanje: novo, - NEW - Description - Robust steel grey cast iron construction - Milling spindle tiltable backwards from 0° to -45° - Three spindle speeds from 3,500 – 10,000 rpm - Standard with reversing (left/right rotation) for milling spindle - Large dimensioned milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and trouble-free speed change - Powerful 5.0 kW industrial motor - Arc milling safety hood included as standard Equipment Details Aluminum sliding table - Equipped with a field-proven ball contact system - Torsion-resistant, high-precision, easy to operate, and trouble-free for daily use - 10-year Holzkraft guarantee on wear of guideways Cast iron milling unit - Mounted directly onto the milling table - Spindle bearings positioned high with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors - Equipped with a powerful three-phase motor Milling guard - The milling guard is equipped as standard for maximum safety with height-adjustable guide rail and protective shield Milling fence - Precise milling fence with quick adjustment and fine-tuning feature, including scale on the fence jaw - Integrated extraction port ensures clear visibility Milling table opening - Large milling table opening allows use of large panel raising cutters and tenoning and slotting tools above and below the table Arc milling safety hood - Included as standard Reversible fence jaws - Versatile, integrated fence to bridge the tool gap - Enables safe work even with narrow workpieces Technical Data: Dimensions and Weights Net weight approx. 290 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1,000 mm Sliding table length 1,000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Space requirements length 1,945 mm Machine body width/depth 710 mm Space requirements width/depth 2,220 mm Working area length 1,600 mm Explanation of Space Requirements Dimensions take into account maximum travels or usable lengths. Working Area width/depth 1,600 mm Machine body length 1,000 mm Explanation of Working Area Please add the stated measurements to the space requirements to determine the recommended free installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Phase(s) 3Ph Drive motor power 5.0 kW Current type AC Milling Spindle Spindle tilt 0 to -45° Spindle speed(s) 3,500/7,000/10,000 rpm Usable spindle length 100 mm Codpovwf Ucefx Afxopu Spindle shaft diameter 30 mm Max. spindle projection above table 130 mm Max. Milling Tool Diameter Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Max. profile cutter diameter 210 mm Delivery Scope Arc milling safety hood Anodised aluminum sliding table Telescopic mitre fence Aluminum fence jaws . 5502045

Stanje: novo, - New - - Cutting plane directly at the sliding table - Heavy-duty steel and cast iron construction - Precision-guided sliding table made of aluminum, standard anodized - Large support table guided on telescopic arm, can be moved longitudinally - Extendable aluminum telescopic fence, angle-adjustable with professional stop flaps - Parallel fence with quick-release and fine adjustment - Large worktable made of milled cast iron remains permanently flat - Standard table extension and table widening enable easy handling of larger workpieces - Smooth operation and precise cuts - Equipped with a powerful three-phase motor - The large-dimension saw unit made of cast iron is mounted twice on the cast table and guarantees stability, precision, quiet operation, and long service life Csdpfovyupzjx Afxjpu - Maximum cutting height is achieved even with the scorer installed Made in Italy Equipment details: Double Rocker Saw Unit - Large-dimension, made of steel/cast iron - Positioned close to the saw blade, mounted on both sides for precision, quiet running, and long service life - Height and tilting up to 45° adjustable by handwheel - Maximum cutting height is maintained even with the scorer installed - Also available with scoring unit Telescopic Fence - Extendable telescopic fence up to max. 2550 mm - Angle adjustable - With professional stop flaps Aluminum Sliding Table - With proven ball contact system used thousands of times - Dust- and dirt-resistant due to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on wear of the guide rails Parallel Fence with Round Bar Guide - With fine adjustment and quick-release - Sturdy round bar guide made of ground steel, 45 mm diameter - Standard fold-down for cutting large workpieces Technical Data: Dimensions and weights Weight approx. 385 kg Dust extraction connection Extraction port diameter 120 mm Blade guard extraction port diameter 60 mm Electrical data Motor power 5.0 kW Connection voltage 400 V Sliding Table and Table Sliding table length 2600 mm Sliding table width 270 mm Sliding table height 124 mm Table length 840 mm Table width 560 mm Table height 900 mm Circular Saw Unit Cutting width with parallel fence 900 mm Max. cross-cut width left of saw blade 2310 mm Edging length 2600 mm Saw blade tilt 90 - 45 ° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm (Main) saw blade diameter 315 mm (Main) saw blade speed 4000 rpm Pack unit 1 Scope of delivery: Table extension and table widening Anodized aluminum sliding table Aluminum flip stops Parallel fence with round bar guide and fine adjustment Art.-No. 5504326

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Max. working height (thickness): 240 mm Csdpfxsvwd U Ij Afxepu Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: novo, - NEW - - Cutting level directly at the saw blade - Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life - Precision-guided aluminium format sliding table, anodized as standard - 10-year HOLZKRAFT warranty against wear of the guide rails on the sliding table - Standard parallel fence with round bar guide and fine adjustment - Large work table made of milled cast iron - Smooth operation and precise cuts - Standard table extension and width extension make handling larger workpieces easy - Extendable aluminium telescopic fence with angle adjustment and two professional flip stops - Made in Italy TECHNICAL DATA Dimensions and weights Weight (net) approx. 295 kg Dust extraction connection Extraction port diameter 120 mm Saw blade guard extraction port diameter 60 mm Installation information Cpedpfovyup Uex Afxou Transport width 700 mm Machine body length 802 mm Machine body width/depth 615 mm Required space length 3860 mm Required space width/depth 2750 mm Required space explanation Dimensions consider maximum travel or usable lengths Working area length 1000 mm Working area width/depth 2000 mm Working area explanation Please add the specified measurements to the required space to determine the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Drive motor power 4.0 kW Rated duty type drive motor S 6 Duty cycle drive motor 40% Sliding table and table Format sliding table length 1600 mm Format sliding table width 270 mm Format sliding table height 124 mm Table length 1020 mm Table width 325 mm Table height 860 mm Circular saw unit Cutting width with parallel fence 900 mm Max. crosscut width left of saw blade 1660 mm Edging length 1600 mm Saw blade tilt 90 - 45° Max. cutting height 90° 100 mm Max. cutting height 45° 79 mm Saw blade diameter 315 mm Saw blade speed 4000 rpm FEATURES Anodized aluminium format sliding table Handle for sliding table Squaring frame Saw parallel fence with round bar guide Stops: Two professional flip stops Squaring shoe Eccentric clamp Table width extension Table length extension Saw blade guard hood

Stanje: novo, Description Worktable made from heavily ribbed cast iron and base frame from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: Format sliding table made of anodized aluminum for maximum cutting precision. Cutting plane located directly at the saw blade. Saw blade tiltable from 90° to 45°. Squaring frame with aluminum crosscut fence and adjustable stop for panels and large workpieces. Spindle moulder guard for profiling operations. Two independent motors for each working unit. TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Dust extraction connection Dust extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Duty cycle of drive motor: S6 Drive motor duty cycle: 40% Drive motor power: 2 x 1.8 kW Sliding table and worktable Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000/7500 rpm Max. spindle tool diameter Max. tool diameter: 160 mm Max. tool diameter (tenoning): 200 mm Panel saw unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilting range: 90 – 45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. blade projection at 90°: 67 mm Max. blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Cedpfxovwfqws Afxjpu Features Anodized aluminum format sliding table Squaring frame with angle-adjustable crosscut fence, flip stop, and degree scale Saw rip fence Eccentric clamp Table extension Milling fence with wooden fence jaws Manual height adjustment of spindle Manual height adjustment of saw blade Manual tilt adjustment of saw blade

Stanje: novo, – New – Description: TERSA quick-change system for tool-free, rapid planer knife changes Four-knife cutterblock delivering superior planing results Smooth operation due to precision engineering and heavy cast-iron construction Long surfacing tables for accurate jointing Cpsdevwf Hrepfx Afxsu Robust surface tables made from ribbed grey cast iron, machined and stress-relieved for high durability and permanent flatness Large, stable aluminium surface fence with round-bar guide (1200 x 150 mm), easily adjustable and tiltable up to 45° Auxiliary fence included as standard Powerful 5.0 kW industrial motor Stable steel and cast-iron construction Slot mortising attachment available as an option Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Net weight: approx. 465 kg

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Cpodpfxevwga Ho Afxeu Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: novo, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made of heavily ribbed cast iron and frame made of welded steel ensure torsional stiffness and vibration-free operation - Unique in this performance class: smooth-running anodized aluminum sliding table with ball contact system - Saw blade tiltable from 90° - 45° - Table extension with angle scale and aluminum crosscut fence for mitre cuts on panels and large workpieces - Planer unit equipped with TERSA quick-change system with three planer knives - Spiral-toothed steel feed roller for consistent workpiece feed during thickness planing - Curved milling guard hood for profiling, standard with fine adjustment - Milling unit with two speeds - Power transmission for the units via three independent motors - Quality Made in Italy Technical Data: Dimensions and Weight Net weight approx. 245 kg Surface Planer Planer table width 300 mm Planer table length 1200 mm Saw/Planer fence tilt angle 90/45° Max. surface planing depth 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter for saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Remarks on space requirement: Dimensions reflect maximum travel range or working length. Thickness Planer Thickness table length 450 mm Thickness table width 300 mm Min. working height 3 mm Max. working height 200 mm Max. thicknessing depth of cut 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Rated duty cycle drive motor S6 Duty cycle drive motor 40 % Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Cpedpfxjvwf Eno Afxsu Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Spindle Moulder Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle height 75 mm Spindle speeds 5000 – 7500 rpm Max. Cutter Diameter Max. cutter diameter 160 mm Max. lowerable cutter diameter 180 mm Max. tenoning cutter diameter 275 mm Planer Knife Shaft Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with rip fence 540 mm Max. crosscut width left of blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Feed Feed speed 6 m/min Scope of Delivery: - Tersa quick-change planer knife shaft - Anodized aluminum sliding table - Multifunction fence for rip and surface planing - Table extension with crosscut fence and fence jaw - Eccentric clamping arm Item No.: 5500030

Stanje: novo, - NEW - Manufacturer: Holzkraft Model: FS 41 elite S Tersa Digital Digital version with motorized thicknessing table adjustment - Planer knife system enables knife changes in seconds and ensures exceptionally quiet operation - Extra-long jointer tables (2200 mm) made from a single piece allow effortless planing of workpieces - Working tables are made of cast iron, stress-relieved and annealed for stability, durability, and perfect flatness - Simultaneous opening of the tables - Rearward-opening, simultaneously moving jointer tables for extremely short setup times - Powerful industrial motor - Fixed extraction hood - Robust steel/cast iron construction Codpfxjvwgc Us Afxspu - Simultaneous table opening - Large fence (standard with auxiliary fence) - Material feed with two speeds operated by a separate motor Technical Data: Total table length: 2200 mm Working width: 410 mm Maximum cutting depth: 5 mm Thicknessing: Dimensions of the thicknessing table: 775x410 mm Min./max. working height: 3/240 mm Feed speeds: 6/12 m/min Cutterblock diameter / number of knives: 95 mm / 4 pcs Speed: 5000 rpm Motor: 400 V / 50 Hz / S6 - 40% duty cycle, 5.0 kW (6.6 HP) Extraction port diameter: 1 x 120 mm Weight: 450 kg Article No.: 550 3441 Location: 97447 Gerolzhofen - loaded free of charge -

Stanje: rabljeno, Leto izdelave: 2006, incl. 2nd sanding shoe Used machine, top specification Manufacturer: SCM Samco Model: EG 2500 Year of manufacture: 2006 Machine no.: AM/28506 Motor: 3.0 / 2.2 kW Sanding length: approx. 2500 mm Sanding width: approx. 1000 mm Abrasive belt length: approx. 6800 mm Table size: approx. 2500 mm x 1000 mm Throat (right): approx. 700 mm Throat (left): approx. 700 mm Cjdpfx Afjvwffboxjpu Electrically adjustable Upper belt cover Upper sanding support Belt speeds: 1400 / 2800 rpm = 23 m/sec / 46 m/sec Right/left belt run Extraction port diameter: 160 mm Required space: approx. 3900 mm x 1700 mm x 1500 mm Total connected load: approx. 4.55 kW Location: 97447 Gerolzhofen, free loaded, unpacked Sold as seen, in existing condition, without any warranty or guarantee.

Stanje: novo, - NEW - GENERAL FEATURES: Machine Frame and Work Table * Steel structure with electrical control cabinet located at the front of the machine * Sanding belts inserted from the left side of the machine * Motorized table height adjustment * Main motor integrated into the machine frame Electrical Equipment * Electromechanical control panel on the left front side of the machine * Automatic star-delta starter for the main motor * Motor protection switches for the motors * Motors with insulation class IP 54 Emergency and Safety Devices * Safety microswitch for thickness limit exceedance * Automatic brake for immediate stop of the aggregates * Emergency stop bar at the workpiece infeed * Mushroom emergency stop buttons at workpiece infeed and outfeed * Lockable main switch * Automatic emergency shutdown of the machine in case of: - Sanding belt breakage - Unsufficiently tensioned sanding belt - Lateral deviation of the sanding belt - Lack of compressed air - Main motor overload Note: The standard version with 400 Volt 50 Hz requires a three-phase mains supply + neutral wire + earth wire. If the 400 Volt power supply has no neutral wire, a single-phase transformer from the price list must be ordered. The same transformer must also be ordered for machines with voltage higher than 400 Volts, regardless of whether a neutral wire is present. The version of the machine with 220 or 230 Volts (50 or 60 Hz) is available at a surcharge (see price list). STANDARD BASIC MACHINE EQUIPMENT - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual working height adjustment - Main motor 11 kW (15 HP) Cpedpfx Ajvwfrnefxsu - Electronic ammeter for the main motor to display current consumption - Electronic display for working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at infeed before the first aggregate - Rubber feed belt 60 Sh - Roller table with two rollers at infeed and outfeed of the work table - Feed belt with two speeds 4.5 / 9 m/min with geared motor - Automatic belt centering Working width mm 1,100 Min./Max. working height mm 4 - 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Main motor output kW (HP) 11 (15) Geared motor kW (HP) 0.45/0.8 (0.6/1.1) Feed speed m/min 4.5/9 Consisting of: 10.90.87 European safety standards (C.E. mark) 93.07.31 Volt 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10-inch control panel with "eye-S" software integration 31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate 97.50.71 Main motor 15 kW (20 HP)

Stanje: novo, The work table is made of heavily ribbed grey cast iron, and the base frame is of welded steel, ensuring excellent torsional rigidity and vibration-free operation. High-quality machine at a true entry-level price. Unique in this performance class: - Sliding table made of anodised aluminium for maximum cutting precision - Cutting line directly at the saw blade - Saw blade unit tiltable from 90 to 45° - Table extension with aluminium crosscut fence and adjustable fence flap for panels and large workpieces - Rip fence with round bar guide and fine adjustment - Powerful motor - Made in Europe Dimensions and weights Weight (net): approx. 170 kg Dust Extraction Connection Extraction nozzle diameter: 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Transport width: 680 mm Working area: 1600 mm x 2300 mm Space required: 2613.5 mm x 2134 mm Please add the stated measurements to the required space in order to determine the recommended free installation area for the machine. Dimensions take into account maximum travel paths or usable lengths. Electrical Data Connection voltage: 400 V Drive motor: 1.8 kW Codevxr S Rspfx Afxepu Phase(s): 3 Rated duty cycle: S6 Current type: AC Duty cycle (drive motor): 40% Mains frequency: 50 Hz Sliding Table and Table Sliding table, format: 1140 mm x 200 mm x 70 mm Table: 1024 mm x 224 mm x 900 mm Circular Saw Unit Cutting width with rip fence: 700 mm Max. cutting height at 90°: 67 mm Max. crosscut width left of blade: 1200 mm Max. cutting height at 45°: 40 mm Edging length: 1200 mm Saw blade diameter: 250 mm Saw blade tilt: 90 - 45° Saw blade speed: 3900 rpm Scope of Delivery Table extension Anodised aluminium sliding table Rip fence with round bar guide and fine adjustment Aluminium flip stop Eccentric clamp Item no. 5504113

Stanje: novo, Standard equipment and accessories - 10-year warranty on the saw carriage guide system Cpedpfsvxr Skex Afxou - Saw carriage with anodized aluminium profile, guide made of hardened, ground and rolled-in steel tracks - Saw carriage length: 3200 mm - "READY" electronic control, 2-axis control (3rd axis available upon request) with: - Height adjustment and tilt of the saw unit (parallel fence control on request) - Tool data management with automatic correction of cutting height relative to the saw blade tilt angle - Manual, semi-automatic, and automatic modes with 99 storable work programs - Additional functions: calculator and operating hours counter - Framing table for quick positioning of the fence for mitre cuts - Outfeed table extensions - Cutting length on rip fence 1270 mm - 2-axis control with 99 programs Motor 7 kW 50 Hz (8 kW 60 Hz) - Motor with direct connection and push buttons - Three main saw blade speeds - Scoring unit with independent motorization, externally adjustable, and stops for easy saw blade positioning Safety/Protection - Emergency stop button at the front - Emergency stop button at the parallel fence area (CE version) - Thermal protection switch - Pendulum blade guard (CE version) with integrated extraction, extraction port diameter 80 mm - Pendulum blade guard with integrated extraction, extraction port 80 mm diameter - Automatic motor brake on main saw blade (CE version) - Lockable main switch - 110 V auxiliary circuit - CE declaration of conformity (CE version) Technical data Maximum cutting height at 90° (mm): 140 (with 400 mm blade) Maximum cutting height at 45° (mm): 97 (with 400 mm blade) Saw blade tilt (degrees): 45 Lifting and tilting of saw unit: programmable Saw blade speed (rpm): 3000 / 4000 / 5000 Scoring blade speed (rpm): 8500 Main motor power (S6 -40%) kW (HP), 50 Hz: 7 (9.5) Scoring unit power (S6 -40%) kW (HP), 50 Hz: 1.3 (1.7) Panel cuts: - with carriage 1600 (mm): n.a. - with carriage 3200 (mm): 3200 x 3200 Rip capacity (mm): 1270 Extraction port diameter: - frame (mm): 120 - saw blade guard (mm): 80 - riving knife (mm): n.a. Net weight, base machine (kg): 1050 109999 Version according to safety regulations R10078 nova si 400ep CE version 930731 Voltage: 400V EU 931201 Frequency: 50 Hz 570343 Digital display for rip fence Complete with: - Digital display and magnetic tape 570133 Motor 9 kW 50 Hz (11 kW 60 Hz) with automatic star/delta switch, 9 kW 12 HP 50 Hz (11 kW 15 HP 60 Hz) 083202 Base frame 109993 MACHINE LANGUAGE: German

Stanje: novo, - New - Description: - Premium features for high productivity in a compact footprint! - Intuitive operation with the eye-S control system and large 10" touchscreen: HMI Maestro Active Edge. Features include graphical display of all machining units and their operating status, graphic simulation of machining processes, control of all machining units, glue pot temperature regulation, setup assistance as per the processing program, error diagnostics for rapid troubleshooting, machining parameter statistics, USB interface, network connectivity ready, and Industry 4.0 readiness with API REST data transfer protocol. - Outstanding accessibility to all working units thanks to the large hood, providing protection and noise reduction. - Monoblock steel construction ensures maximum machine stability and rigidity. - Automatic unit positioning when changing panel thickness. - Automatic feed of strip edges with edge magazine (me 35 t s): Solid wood strip edges are auto-loaded and synchronized with panel feed. - Panel feed via chain conveyor with rubber glide shoes. - Extendable workpiece support table. - Infeed fence adjustment by spacer plates. Technical Data: Dimensions and Weight Length: approx. 3314 mm Height: approx. 1300 mm Width/Depth: approx. 1085 mm Weight: approx. 545 kg Flush/Radial Milling Unit Motor power: 2 x 0.35 kW Spindle speed: 12,000 rpm Cutter diameter (carbide-tipped): 55.3 mm Cedpevwfmlsfx Afxjpu Extraction port diameter: 2 x 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue Unit Glue pot motor power: 0.25 kW Glue pot extraction port diameter: 60 mm Working temperature: 190°C Glue pot capacity: 0.8 kg Pneumatic Connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed motor power: 0.55 kW Feed speed: 7 m/min Edges Edge thickness, rolls: 0.4 – 3.0 mm Edge thickness, strips: up to 5.0 mm Pre-Milling Unit Motor power: 3 kW Diamond cutter diameter: 80 mm Material removal: 0.5 / 2 mm Spindle speed: 7200 rpm Cutter height: 56 mm Extraction port diameter: 2 x 80 mm Scraper Units Radius scraper: 2 mm Buffing Unit Motor power: 2 x 0.14 kW Speed: 2800 rpm Workpiece Workpiece thickness: 8 – 50 mm Minimum workpiece width: 110 mm Minimum workpiece length: 120 mm Item No. 5507235

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Panelna žaga SCM Sigma Impact z zadnjim nalaganjem. Stroj je demontiran. Cpedpsw Rdkaefx Afxou

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, vhodna napetost: 380 V, Avtomatski štirivreteni skobeljni stroj SCM model Compact 23 K - Sestava 1- Spodnji horizontalni 2- Desni vertikalni 3- Levi vertikalni 4- Zgornji horizontalni - Delovna širina 230 mm. - Vhodna miza 2000 mm. - Leto 2000 (CE) - 380V/50Hz Csdpfx Afjx Rn Ukexopu

Leto izdelave: 2020, Stanje: pripravljen za uporabo (rabljen), skupna masa: 220 kg, moč vretenovega motorja: 5.000 W, največja hitrost vretena: 10.000 obr/min, This SCM Class TI120 C was manufactured in 2020. It is a robust woodworking spindle moulder featuring a spindle tiltable by ±45° and a speed of up to 10,000 rpm. The machine offers manual adjustment with a digital readout for precision, and a main motor power of 5 kW. Ideal for detailed wood milling operations. Contact us for further information about this machine. • Table: 1200 × 810 mm • Spindle: • Tilting range: ±45° • Length: 140 mm • Speeds: 3000 / 4500 / 6000 / 7000 / 10,000 rpm • Max. tool diameter: 250 mm • Height adjustment: Manual with digital display • Tilt adjustment: Manual with digital display • Speed indication: Digital • Motor: Main motor power 5 kW • Extraction system: • Main extraction port: 1 × Ø120 mm • Table extraction ports: 2 × Ø80 mm • Required air speed: 20 m/s • Air requirement: 1550 m³/h • Fence: Wooden • Electrical: 400 V / 50 Hz / 3-phase • Noise level: 83.7 dB(A) • Safety: Motor protection switch Additional equipment: • Bandsaw unit (optional): • Wheel diameter: 400 mm • Wheel speed: 980 rpm • Max. cutting height: 400 mm Csdsyarccjpfx Afxepu • Max. cutting width: 380 mm • Blade length: 3835–3910 mm • Auxiliary table size: 620 × 450 mm • Table height: 890 mm (tiltable up to 20° to the right) • Max. saw blade size: 30 × 0.5 mm • Fence: Steel • Motor power: 1.5 kW • Saw blades included: 4 pcs

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, This SCM DMC SYSTEM wide belt sander was manufactured in 2021. It offers a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Featuring electronic PRO SAND control and a PLC terminal with a 10.4" LCD color display, the machine provides advanced user interface functions. Equipped with multiple working units for various sanding tasks, it is powered by frequency inverters for precise speed control. Contact us for further details about this machine. Additional equipment Cpodpfxoyaqg Te Afxsu • Vacuum motor: powered by inverter up to 7.5 kW, integrated into the machine frame / Conveyor belt: rubber-coated, 50 Shore / Conveyor belt motor: 4 kW driven by inverter / Console: integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 working programs / Control system: interactive error diagnostics, self-diagnosis, full HD display with multi-touchscreen, Maestro Pro Sand software • Operating temperature: +5 to 35°C / Additional features: virtual keyboard, production report, display of electrical and pneumatic diagrams, user manual. Machine advantages Technical advantages • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: Pro Sand electronic control / display: PLC terminal with 10.4" LCD color display • Sanding belt dimensions: 150 x 5000 mm / Chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Unit 1: TIE 5000 working unit for extra table inner cross pad / Automatic brake, linear blower, sanding belt cleaning system / Unit 2: DO19 orbiting unit for 19 rotating disc brushes / Main motor: 1.1 kW / Rotating disc diameter: 125 mm / Units 3 & 4: BF300 working unit for brush roller / Brush roller diameter: 300 mm / Motor: 4 kW / Unit 5: SC 2620 working unit for super-finishing pad / Chevron belt dimensions: 1370 x 2186 mm / Sanding belt dimensions: 1370 x 2620 mm

Stanje: rabljeno, številka stroja/vozila: 007981, Tip pritrjenega roba: tanek rob, debel rob, masivni les Lepilni sistem: EVA Cjdpsw Ic Tzefx Afxopu Spojno rezkanje: da Multifunkcijska enota: da Maks. hitrost pomika: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos

Stanje: novo, Leto izdelave: 2026, Format Circular Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tiltable saw blade and format sliding table made of anodized aluminium Codpfxjxw N N Ho Afxopu Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net) approx. 690kg Extraction Connection Extraction nozzle diameter: 120mm Extraction nozzle diameter (blade guard): 80mm Electrical Data Connection voltage: 400V Mains frequency: 50Hz Scoring motor power: 0.65kW Output power (main motor): 7.0kW Rated duty type main drive: S6 Duty cycle main drive: 40% Sliding Table and Worktable Sliding table length: 3200mm Sliding table width: 360mm Sliding table height: 175mm Table length: 1000mm Table width: 560mm Table height: 900mm Saw Unit Cutting width with rip fence: 900mm Max. cross-cut width left of saw blade: 3200mm Edging length: 3200mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136mm Max. cutting height at 45°: 97mm Max. cutting height explanation: independent of scoring blade Saw blade diameter: 400mm Saw blade diameter explanation: independent of scoring blade Saw blade speed: 3500/5000rpm Scoring Unit Scoring blade diameter: 120mm Scoring blade speed: 9200rpm FEATURES Equipment Scoring unit with separate motor Anodized aluminium sliding table Handle for sliding table On/Off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Saw rip fence with round bar guide Stops: Two professional foldable stops Edging shoe Eccentric clamp Table extension Table enlargement Saw blade swing-away guard Height adjustment and tilting of saw unit: motorized, digital display for tilting Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, SCM širokopasovni brusilni stroj dmc sd 60 DMC60 RCS 110 AB /00003689 Evropski varnostni predpisi (oznaka C.E.) 400 V EU Frekvenca 50 Hz Širina brušenja: 1100 mm Izvedba "B" za RCS Valjčna miza na vstopu in izstopu za dolge obdelovance Elektronska programska enota "LOGIC SC" "RA" poševno rebrast jekleni kontaktni valj – 1. agregat 2. agregat brusilnik s podplatno enoto Glavni motor 15 kW (20 KM) Csdpfxsx Nrwmo Afxopu Lokacija: pri stranki - na voljo takoj -

Stanje: novo, Leto izdelave: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and format sliding carriage made from anodised aluminium Article number: 5504932 Brand: Holzkraft Solid worktable made from heavily ribbed grey cast iron – for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precision format sliding carriage made from anodised aluminium – smooth running on high-quality ball contact system Carbide guide rails – for long-term precision and minimum maintenance Tilting grey cast iron saw unit with double segment guide – accurate zero-point tilt for highest cutting precision Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding carriage – for fast and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality squaring frame – with robust telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading, and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and weights Weight (net) approx. 670kg Extraction connection Extraction port diameter: 120mm Extraction port diameter (saw blade guard): 80mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Scoring motor power: 0.65kW Output power (main motor): 7.0kW Rated operating mode main drive: S6 Duty cycle main drive: 40% Sliding carriage and table Format sliding carriage length: 3200mm Format sliding carriage width: 360mm Format sliding carriage height: 175mm Table length: 1000mm Table width: 560mm Table height: 900mm Saw unit Cutting width with rip fence: 900mm Max. crosscut length left of saw blade: 3200mm Squaring length: 3200mm Saw blade tilt: 90 - 46° Cpjdpfx Afexw N Sbjxou Max. cutting height at 90°: 136mm Max. cutting height at 45°: 97mm Note max. cutting height: independent of scorer Saw blade diameter: 400mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000rpm Scoring unit Scoring blade diameter: 120mm Scoring blade speed: 9200rpm Equipment Scoring unit: with separate scorer motor Anodised aluminium format sliding carriage Sliding carriage handle Squaring frame Material roller on squaring frame Rip fence: with round bar guide Stops: Two professional folding stops Squaring shoe Eccentric clamp Table extension Table enlargement Saw blade pendulum guard Height adjustment and tilting of the saw unit: manual Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 2017, maks. delovna širina: 630 mm število nožev: 4 kos nožni valj: Tersa-nožni valj Csdpfx Afjyfwg Roxjpu motorna zavora: da maks. debelina skobljanja: 300 mm min. debelina skobljanja: 3,5 mm maks. odvzem odrezka: 8 mm prikaz debeline: digitalni zaslon brezstopenjska hitrost podajanja: 4-20 m/min vodilo debeline mize: dvojno vijaki mize za debelino: 4 kos vlečni valji: guma, neprekinjeno izvlečni valji: guma dušilec zvoka: da teža pribl.: 886 kg moč motorja: 7,5 kW premer odsesovalnega priključka: 150 mm Lokacija skladišča:

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.500 kg, SCM M2 Caterpillar Multi-Blade Saw 18 kW Specification: • Condition: used • Manufacturer: SCM • Model: M2 • Track width: 220 mm • Maximum working height: 120 mm • Main motor power: 25 HP (18 kW) • Blade diameter: 340 mm • Spindle diameter: 40 mm, bushings 70 mm • Track feed speed adjustable from 6 to 48 m/min • Track in very good condition, not worn • Working table dimensions: 164 x 90 cm • Extraction port diameter: 180 mm • Weight: approx. 1500 kg • Overall dimensions: 220 x 160 x 140 cm (W x L x H) Cedpfxjt Rivye Afxepu Additional Information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the offered item • Possibility to connect and test the machine on site • The auction price does not include VAT or transport costs Additional photos and video available at the link below: drive.google.com/drive/folders/1u41GyV7Exyaj8dfI1m5fPvTzSnMzhRqd ?usp=sharing

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja višina reza: 120 mm, skupna širina: 1.470 mm, skupna dolžina: 1.670 mm, skupna višina: 1.400 mm, skupna masa: 1.500 kg, premer žaginega lista: 340 mm, premer ekstrakcijske šobe: 180 mm, delovna višina: 120 mm, vrsta vhodnega toka: trifazni, SCM M2 Chain Feed Multirip Saw Specification: • Condition: Used • Manufacturer: SCM • Model: M2 • Chain width: 220 mm • Max. working height: 120 mm • Main motor power: 25 HP (18 kW) Cpedpfxouqk Nzo Afxeu • Blade diameter: 350 mm • Spindle diameter: 40 mm, bushings: 70 mm • Chain feed speed adjustable from 6 to 48 m/min • Chain in good condition, no wear • Working table dimensions: 164 x 90 cm • Extraction port diameter: 180 mm • Weight: approx. 1500 kg • Overall dimensions: 167 x 147 x 140 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos reflect the actual condition of the item for sale • Possibility to connect and test the machine on site • The price stated in the listing does not include VAT or shipping costs