Scm Multiflex C nakup rabljenega (649)

Stanje: dober (rabljeno), Kód: 0321 Znamka: SCM Model: MULTIFLEX C - CE Standard Avtomatski delovni center za izdelavo okenskih okvirjev za čepovanje, profiliranje in konturiranje – maks. debelina obdelovanca 140 mm – CE standard Iedjytn U Iepfx Agfetl Tehnični podatki Avtomatski voziček z zagozdilcem Maks. delovna dolžina: 2800 mm Min./maks. debelina obdelovanca: 30/140 mm Premer žage za odrezovanje koncev: 400 mm – motor 4 KM Uporabna dolžina čepilnega vretena: 320 mm – motor 10 KM Premer vretena: 50 mm Maks. premer orodja: 350 mm Profilirna vretena: 1. proticepilno profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm 2. profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm Min. in maks. premer orodij profilnih vret: 100/220 mm Premer profilnih vreten: 50 mm Orodna skupina: Zuani Spremenljiva hitrost pomika Skupina za vračanje zasteklitvenih letvic – motor 3 KM – premer odsesovalnega priključka 50 mm Skupne mere: 2400 x 3300 x 2000 mm (v x š x g) Teža: 2200 kg

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Itodpfx Ageiknp Rofsl Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: rabljeno, številka stroja/vozila: 007966, Pozicija 1: Nakladalec SCM-EVOLUTION C Iodpfx Agewu Agpsfotl Pozicija 3: Razkladalec SCM-EVOLUTION C

Stanje: rabljeno, Leto izdelave: 2011, OSI DELOVNI PODROČJE OSNOVNE OSINe: X-Y-Z osi * mm 3050-1300-180Dolžina obdelovanca pri nihajnem obdelovanju mm 1390Hod osi X-Y-Z mm 3460-1735-250maks. hitrost premikanja osi X-Y m/min 60DELOVNA MIZAŠtevilo opornih površin za obdelovance in vakuumske prisesalne glave 6 / 2 Standard TipStandardKončne ustavne točke / Pozicija 1 / zadajVakuumska črpalka m3/h 90/108SVRTILNA ENOTAVrtikalne vretena Std./število/hitrost 1/min 12 (8X-5Y) / 4000Horizontalne vretena Std./število/hitrost 1/min 6 (4X-2Y) / 4000Integrirana utor/žagalna enota v X Ømm/1/min 120 / 6000Moč motorja kW (KM) 2,2(3)ELEKTRIČNO VRETENOMožnost motorja Std. / Opt. (S6) kW (KM) 7,5(10) / 11(15)maks. hitrost 1/min 24000Menjava orodja, ki se premika na nosilcu enote v X 4 mesta, pnevmatskaINSTALACIJANamestitev KVA 23÷28,5Potreba po stisnjenem zraku Nl/min 450Potreba po odsesalnem zraku m3/h 1900+1900 (3400)Potrebna hitrost odsesalnega zraka m/sec 30Premer odsesalne odprtine mm 150+150 (200)Teža stroja Kg 3000 * X razdalja med ustavnimi točkami - Y sredina frezerja kot referenčna točka; Z prehod obdelovancaSPLOŠNE LASTNOSTI CNC-nadzorovano vrtalno in frezersko središče, s C-konstrukcijo in delovno mizo z nastavljivimi opornimi površinami in vakuumske prisesalne glave, za izvajanje:- Vertikalnih vrtin na površini plošče- Horizontalnih vrtin na vseh štirih straneh obdelovanca- Utorov s krožnim frezerjem v smeri "X"- Splošna frezerska delaSamonosna konstrukcija in delovna mizaKonstrukcija iz jeklene varjene konstrukcije z omarico za nadzorno elektroniko, integrirano v okvir stroja. Na voljo v dveh različnih dolžinah in s standardnimi opornimi površinami ali TV opornimi površinami.Premikajoči se nosilec enoteKonstrukcija v obliki okvirja iz hladno valjane jeklene pločevine z notranjimi rebrastimi ojačitvami, zaščitne naprave z odbijači.Delovna enota, sestavljena iz vrtalne glave z vertikalnimi vreteni, horizontalnimi vreteni, integrirane utorne/žagalne enote in električnega vretena SCME z sistemom za hitro menjavo orodij tipa HSK 63 F.Hodi mostu in nosilca enotePremik v osi X, Y in Z poteka po linearnih prizmatičnih utornih tirnicah z uporabo prednapetih tirnic. Prenos gibanja osi X (premikajoči se stojalo) poteka prek prednapetega, povratnega zobniškega pogona s poševnim gibom. Premik nosilca enote v smeri Y in Z poteka prek prednapetih tirnic. Pozicioniranje delovnih enot in nadzor funkcij stroja poteka prek "brezščetkavih" trifaznih servomotorjev in digitalnih pogonov.CNC NADZORNadzorna enota je sestavljena iz numeričnega nadzora za frezerske in vrtalne stroje ter predhodno nameščenega osebnega računalnika z grafičnim uporabniškim vmesnikom "XILOG PLUS".Računalnik - Operacijski sistem Office Windows XP- LCD-barvni zaslon 17- Qwerty tipkovnica- vrtljivo upravljalno plošče- vmesnik stroja Programska oprema Xilog PlusLastnosti Xilog PlusProgramiranje- parametrično, grafično in ISO programiranje- uvoz datotek DXF in ASCII- interpolacija črt ali krožnic v treh osi, linearna v prostoru, spiralna v izbrani ravnini- podprto programiranje z grafično pomočjo in sintaktično pomočjo za vrtanje in frezerske operacije- samodejna optimizacija vrtalnih operacij in izmenjava orodij- cikel- možnost premika referenčne točke plošče za izvajanje vrtin na poševnih ali ukrivljenih straneh plošče- popolna združljivost s CAD/CAM programi Routocam (SCM) - AlphaCamIntegrirane dodatne funkcije- kalkulator za neposreden prenos izračunanih podatkov- Itjdpfxeyymz Uj Agfel

Stanje: rabljeno, Leto izdelave: 2006, · Delovno območje: 2.650 x 1.240 mm · Gibljiva pot X-Y: 2.995 x 1.385 mm · Dolžina giba osi Z: 200 mm · Višina prehoda: 180 mm · Os C je izklopljena · 3-osna naprava Konstrukcija osnovnega telesa je monolitna, izdelana iz jekla z debelimi stenami. S prečno privarjenimi trikotnimi ploščami je ojačana po celotnem stroju, kar zagotavlja izjemno stabilnost. Trikotna oblika, uporabljena za nosilne dele z veliko osnovo, je skrivnost trajne natančnosti in stabilnosti. Razporeditev stroja uporabniku omogoča optimalen delovni proces, kljub minimalnim zahtevam glede prostora. Tako zasnovano osnovno telo zagotavlja obdelovalni glavi uravnoteženo in varno podlago z izjemno dobro porazdelitvijo obremenitve. Mobilna nosilna plošča je izdelana iz masivnega monobloka. Giblje se v smeri X po prizmatično obdelanih vodilih, s pomočjo krogličnih vijakov. Na tej mobilni nosilni plošči je obdelovalna glava nameščena na prizmatično obdelanih vodilih in krogličnem vijaku. Opis obdelovalnih glav in dodatne opreme (osnovna različica): Obdelovalna glava za vrtanje: · Vrtalna glava z 12 + 6 vreteni · 7 samostojno nastavljivih vertikalnih vreten v smeri X Ijdex Twccspfx Agfotl · 5 samostojno nastavljivih vertikalnih vreten v smeri Y · 4 horizontalna vretena v smeri X (2+2) · 2 horizontalna vretena v smeri Y (1+1) · Hitrost vrtenja: 4.000 1/min · Moč: 2,2 kW · Razmak: 32 mm · Vpenjalna glava za svedre: M 10 z vpenjalno velikostjo 11 mm Obdelovalna glava za rezanje navojev v smeri X: · Integrirana v vrtalno glavo · Rezilo za rezanje navojev s premerom do največ 120 mm Glavna obdelovalna glava za frezanje (položaj 2): · Vpenjalna glava HSK 63F · Hitrost vrtenja 1.500 - 24.000 1/min, brezstopenjsko nastavljiva preko frekvenčnega menjalnika · Moč motorja 4,4 kW (6 KM) od 12.000 1/min (S1) · Moč motorja 6,6 kW (9 KM) od 12.000 1/min (S6) · Vrtenje v levo / desno · Keramični ležaji · Obseg dobave: 4 kos vpenjalne glave (desna), brez vpenjalnega nastavka Menjalnik orodja R8L Avtomatski menjalnik orodja za 8 orodij. Nameščen na zadnji nosilni plošči, omogoča hiter dostop do orodij. · Število mest za orodja: 8 · Največji premer orodja: 120 mm · Največja teža na orodje: 4,5 kg · Največja skupna teža vseh orodij: 22 kg · Nosilec za 1 kotni reduktor · Gibljiv v smeri X Obdelovalna glava za horizontalno frezanje (položaj 1) Horizontalna obdelovalna glava z dvema nasprotnima izhodoma za frezanje in utore. · Hitrost vrtenja 9.000 - 18.000 1/min, brezstopenjsko nastavljiva preko frekvenčnega menjalnika · 1 izhod za vpenjalni nastavek 3-20 mm (ER 32) · 1 izhod za žago/vpenjalni nastavek 3-12 mm (ER20) (Za žago D=120 mm / luknja 50 mm) · Moč motorja 3 kW (4 KM) · Največji premer rezalnika spredaj: 20 mm · Največja dolžina rezalnika spredaj: 110 mm · Največji premer rezalnika zadaj: 12 mm · Največja dolžina rezalnika zadaj: 80 mm · Največji premer žaginega lista: 100 mm · Luknja žaginega lista (ER 32): 50 mm · Premer gredi žaginega lista (ER 20): 12 mm Delovna miza Delovna miza je zasnovana tako, da uporabniku zagotavlja največjo "svobodo gibanja". Sistem za hitro vpenjanje z vakuumom omogoča največjo prilagodljivost pri natančnem pozicioniranju in optimalnem prijemu obdelovancev. · 6 opornih točk, 1000 mm, brezstopenjsko nastavljivo v smeri X s pnevmatičnim sistemom · 12 vakuumska sesalnih skodelic, okrogli premer D = 110 mm, brezstopenjsko nastavljivo v smeri Y (2 skodelici na oporno točko) · 2 opori v smeri X (1 x leva / 1 x desna) · 1 opora v smeri Y na oporno točko (skupaj 6 kosov) · Potopne ref

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Isdpfx Ajhp Rdlsgfotl Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Iedpfxodqzh Tj Agfotl Anodised aluminium sliding table Mitre fence with flip stop Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 8046 Tehnični podatki: - največja širina obdelovanega elementa 900 mm - največja višina obdelovanega elementa 160 mm 2 agregata: 1) gumijast valj z utori za kalibriranje 2) gumijast valj + notranji valj + kovinski valj – od zgoraj: - gumijast valj, drsni I agregat - 2 x gumijast valj, drsni II agregat - drsni valj, gumijast, gladek – od spodaj: - vlečni trak - nihanje traku s pnevmatičnim sistemom - 2 različni načini hitrosti premika 0,55 kW - električno dvigovanje mize - glavni motor 7,5 kW Iedszx Rzyepfx Agfetl - delovni tlak 6-8 bar - premer odtočnega priključka 2 x 160 mm - dimenzije (dolžina/širina/višina) 1300 x 1500 x 1950 mm - teža 1100 kg Prednosti: - izdelano v Italiji, - nerazbarvano – rabljeno brusilno orodje, zelo dobro stanje Neto cena: 28900 PLN Neto cena: 6890 EUR, odvisno od menjalnega tečaja 4,20 EUR (Cene se lahko spreminjajo glede na večje nihanje menjalnega tečaja)

Leto izdelave: 2010, obratovalne ure: 540 h, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.735 mm, pomik po osi Z: 250 mm, skupna masa: 2.000 kg, število osi: 4, This 4-axis woodworking boring machine, SCM TECH Z2-27-C, was manufactured in 2010. It offers a maximum workpiece height of 160 mm, a length of 2700 mm, and a width of 1300 mm. The machine is equipped with an overhead milling spindle and a horizontal drilling unit, enabling versatile machining operations. If you are looking for a high-quality woodworking machine, consider the SCM TECH Z2-27-C that we have for sale. Contact us for further details. • Electrical specs: 400 V, 3 + N, 33 A, 50 Hz, switching capacity 10 kA • Control system: Xilog Plus • Machining units: Sawing unit (included), horizontal boring unit (included), milling spindle: 1 • Workpiece capacity: max height 160 mm; max length 2700 mm; max width 1300 mm; max width (double columns) 1210 mm • Max. traverse speed: 60 m/min • Clamping system: pneumatic clamping bars; number of clamping bars: 6 • Suction pad sizes: 120x120 mm and 55x120 mm Itedpfszug A Eox Agfsl • Machine hours: 5,500 h

Stanje: zelo dobro (rabljeno), SCM Casadei C 41 C, univerzalni kombinirani stroj za obdelavo lesa z odvzemnikom prahu FT 200 Naprodaj je univerzalni kombinirani stroj za obdelavo lesa SCM Casadei C 41 C, izdelan leta 2016. Stroj je bil kupljen nov pri podjetju Hudek Zagreb d.o.o. in je bil uporabljen v proizvodnji. Je v popolnoma delujočem stanju, pregled in testiranje sta možna po predhodnem dogovoru na njegovi trenutni lokaciji v Antunovacu, Hrvaška. Stroj združuje več postopkov obdelave lesa v eni kompaktni enoti: Strigalno ravnanje Debelinski planer Žaganje Oblikovanje z vretenom Vrtanje in izdelava utorov Označevanje Uporaba drsnega stola Identifikacija stroja: Proizvajalec: SCM Industria S.p.A. Znamka: SCM Casadei Model: C 41 C Tip: C 41 Označba: Univerzalni kombinirani stroj za obdelavo lesa Leto izdelave: 2016 Različica z oznako CE Država izdelave: San Marino Teža stroja: 628 kg Strigalni in debelinski planer: Delovna širina: 410 mm Dolžina strigalnega planerskega stola: 1.800 mm Debelina obdelovancev: 3,5–230 mm Hitrost podajanja debelinskega planerskega stroja: 7 m/min Krožna žaga: Nagibna žaga: 90–45° Maksimalni premer žaginega lista: 315 mm Maksimalna višina reza: 100 mm Maksimalna širina reza na desni strani: 900 mm Enota za označevanje Drsni stol Drsni stol: Dolžina drsnega stola: 2.310 mm Oblikovalni stroj z vretenom: Hitrosti vretena: 3.500 / 7.500 / 10.000 vrt/min Ijdpfsznbyxox Agfotl Premer vretena: 30 mm Uporabna višina vretena: 120 mm Enota za vrtanje in izdelavo utorov: Pomik stola: X 160 / Y 105 / Z 115 mm Vretenčna glava Wescott: 0–16 mm Električna in varnostna oprema: Trije motorji: 3 × 5,0 kW Napajalna napetost: 400 V, trifazna Frekvenca: 50 Hz Nazivni tok, prikazan na ploščici stroja: 10 A Zavore motorjev Gumb za izklop v sili Različica CE Priložena oprema: Priložen je odvzemnik prahu FT 200 z nazivno močjo 1,1 kW, vključno s fleksibilno cevjo za odsesavanje. Stanje in razpoložljivost: Stanje: rabljen in delujoč Predhodno uporabljen v proizvodnji Razpoložljivost: takoj Pregled in testiranje sta možna po predhodnem dogovoru Lokacija: Antunovac, blizu Osijeka, Hrvaška Cena: 7.500 EUR plus DDV Cena je pogajljiva za resnega kupca po ogledu stroja.

Stanje: zelo dobro (rabljeno), Dvostranska samostojna strojna enota (1. in/ali 2. strojna enota v proizvodni liniji) Debelina roba (min/maks) mm 0,4 / 3 Debelina plošče (min/maks) mm 10 (približno) / 60 Isdpezmfg Tefx Agfjtl Delovna širina (min/maks) mm 260 (približno) / 3200 Nadzor MAESTRO PRO EDGE / programsko opremo EYE-M Hitrost podajanja (nastavljiva) m/min 10-40 Kabina za varnost in zmanjšanje hrupa + razdalja med gredami (mm) 400 OBDELAVA ROBOV (za vsako stran): Zaščitni rezalnik (za obdelavo roba) AS (1 x Kw 4) Obdelovalni stroj DTR (2 x Kw 8) z navpično nastavitevjo s krmilnikom CN Naprava za nanašanje (za tekočo proti-lepilno snov) AAR ENOTA ZA NANAŠANJE OBROBNEGA TRAKU (za vsako stran): Predgrevalne žarnice + enota za nanašanje lepila (PU lepil + predgrevalnik) Nastavitev višine obrobnega traku, upravljanega s krmilnikom CN Območje pritiska (upravljano s krmilnikom CN) + rezervoar za obrobni trak (št. 6) – pozicioniranje obrobnega traku s krmilnikom CN Enota za obrezovanje YU/SP-750 (30 m/min) Predrezalna enota RSP Večprofilna rezalna enota (upravljana s krmilnikom CN) RI/S 2P Rezalna enota za oblikovanje (kopirna) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Enota za rezanje profilov RAS/S Univerzalna rezalna enota za izdelavo utorov/utora in oblikovanje U (1 x Kw 5,5) na levi strani Enota za rezanje ravnih robov RCA/2C Naprava za nanašanje (za polirno tekočino) Enota za čiščenje SPE

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness in rolls (min/max): 0.4 / 3 mm Panel thickness (min/max): 14 / 60 mm Working width (min/max): approx. 260 / 3200 mm Control / Software: MAESTRO PRO EDGE Feed speed (adjustable): 10–40 m/min Safety and noise protection cabin + cam spacing (mm): 400 Panel processing (for each side): - Protection cutter (pre-milling) AS (1 x 4 kW) - Chipper unit DTR (2 x 8 kW) - Spray unit (for liquid anti-adhesive) AAR EDGE BANDING SECTION (for each side): - Radiator to heat workpiece edges - Gluing station (hot melt + pre-melter) - Pressure zone (CNC controlled) - Motorised edge magazine for rolls (2 positions) - End trimming unit YU/SP-750 (30 m/min) - Pre-milling unit RSP Ijdpfswhi Sljx Agfstl - Multi-profile milling unit (CNC controlled) RI/S 2P - Copy shaping unit (profile tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM and Fast-Release - Profile scraping unit RAS/S - Flat scraper unit RCA/2C - Spray unit (for polishing liquid) - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Stanje: pripravljen za uporabo (rabljen), SCM T 120 C brez podajalnika Isdpoyw Sydsfx Agfjtl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, I am selling the window construction angle line SCM Multiflex. - Milling heads: VIVALDI EU68mm Itedpohw Dfyofx Agfjl - Cutting and tenoning spindle on the right / tenoning side - 2 pcs. profile milling spindles + glazing bead crosscut saw on the left / profiling side - Available immediately.

Stanje: rabljeno, Leto izdelave: 1989, Z brusnimi agregati, sestavljenimi iz: - 1x kalibrirni valj - 1x kombinirani agregat s fiksnim čevljem rabljeno Itodpfx Aey H N Taogfol Blagovna znamka: SCM Tip: UNO C-CS Leto izdelave: 1989 Serijska št.: AE005036 REF.: 030514 Širina brušenja: cca 920 mm Višina odprtine: cca 3-160 mm Število agregatov: 2 kosa, 1x15 kW Agregata od zgoraj: 2 kosa Dimenzije traku (d x š): 1525 x 930 mm 2x podajalna hitrost: 4,5 / 9,0 m/min 1x kalibrirni valj – kanaliran / gumiran 1x kombinirani agregat s fiksnim brusnim čevljem – gumiran valj Priklop za odsesavanje Ø 2x160 mm Prostorske zahteve cca 1600 x 1500 x 1800 mm Teža cca 1200 kg Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nezapakirano Predaja v obstoječem stanju, kot je bilo ogledano, brez garancije ali jamstva.

Stanje: novo, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made of heavily ribbed cast iron and frame made of welded steel ensure torsional stiffness and vibration-free operation - Unique in this performance class: smooth-running anodized aluminum sliding table with ball contact system - Saw blade tiltable from 90° - 45° - Table extension with angle scale and aluminum crosscut fence for mitre cuts on panels and large workpieces - Planer unit equipped with TERSA quick-change system with three planer knives - Spiral-toothed steel feed roller for consistent workpiece feed during thickness planing - Curved milling guard hood for profiling, standard with fine adjustment - Milling unit with two speeds - Power transmission for the units via three independent motors - Quality Made in Italy Technical Data: Dimensions and Weight Net weight approx. 245 kg Surface Planer Planer table width 300 mm Planer table length 1200 mm Saw/Planer fence tilt angle 90/45° Max. surface planing depth 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter for saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Remarks on space requirement: Dimensions reflect maximum travel range or working length. Thickness Planer Thickness table length 450 mm Thickness table width 300 mm Min. working height 3 mm Max. working height 200 mm Max. thicknessing depth of cut 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Rated duty cycle drive motor S6 Duty cycle drive motor 40 % Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Spindle Moulder Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle height 75 mm Spindle speeds 5000 – 7500 rpm Max. Cutter Diameter Max. cutter diameter 160 mm Max. lowerable cutter diameter 180 mm Max. tenoning cutter diameter 275 mm Planer Knife Shaft Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with rip fence 540 mm Max. crosscut width left of blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Feed Feed speed 6 m/min Scope of Delivery: Ijdjvwf Enjpfx Agfstl - Tersa quick-change planer knife shaft - Anodized aluminum sliding table - Multifunction fence for rip and surface planing - Table extension with crosscut fence and fence jaw - Eccentric clamping arm Item No.: 5500030

Stanje: novo, Leto izdelave: 2026, Spare parts for SCM edge banding machines, bending machines, and edge banders. Itjdpfofiv Tnex Agfjl TANKS AND COMPONENTS – NEW OR REFURBISHED BUSHES, GLUE SPREADER ROLLERS, NEEDLE ROLLERS AND RUBBER ROLLERS, RESISTORS AND PROBES, CASTER WHEELS PLATES AND CHAIN LINKS, CHAIN PINS PRESS BELTS, CARDAN SHAFTS, MOTORS COMPLETE UNITS

Stanje: rabljeno, v posebni opremi Strojna miza v dveh sistemih podpore – leva polovica mize s podlagami TVN, desna polovica mize ALU s svojim vakuumskim krogom Hodi: X = 4400 mm, Y = 1720 mm, Z = 400 mm Vpenjalno orodje HSK 63 F Ijdpszxzgmofx Agfjtl Motor 7,5 kW, 900–20.000 vrt/min. Inverter 18 kW za agregat Prisma – povečana izhodna moč do 11 kW Menjalnik orodja RAPID 24 = 24 mest za orodja Agregat za vrtanje z 18 vreteni Oprema za obdelavo vrat (H = 110 mm) - za obdelavo desnih in levih vrat - z 4 pnevmatskimi pomočnimi pripomočki za pozicioniranje, vsak do 20 kg - 6 referenčnih opor, ki presegajo furnir Lasersko pozicioniranje za sistem TV Osrednji sesalni priključek nad CNC Vakuumna črpalka 250 m³ Nadzorna enota/električni omarici: - NUM serija 1000 z pisarniškim računalnikom - XILOG-PLUS - Kabelski daljinski upravljalnik - Analogni modem s programsko opremo za teleservis Nihajna obdelava standardna za 2 delovna območja LED zaslon / pozicioniranje sesalnika Motor. transportni trak za odrezke Protizdrsna podloga v treh delih / spredaj Velik paket dodatne opreme z vakuumskimi sesalniki, oporami itd. Stroj iz skladišča mizarstva zaradi upokojitve Stroj je še vedno v uporabi in v zelo dobrem stanju od trenutne lokacije

Stanje: rabljeno, težka precizna formatna krožna žaga SCM SI 550 E Class Različica: tesarstvo - mizarstvo Dolžina reza: 3200 mm Širina reza: cca 1500 mm Itsdpfx Aszi Sctegfel Glavni motor: 11 kW 3 hitrosti: 2500/3000/4200 o/min Kotni prislon z dolžinsko kompenzacijo Žagin list do Ø 550 mm Električno dvigovanje in nagibanje žaginega lista z digitalnimi prikazi Stroj iz upokojitve / prva dostava 2011 Stroj delavniško pregledan, v VRHUNSKEM STANJU Na zalogi v Liebochu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable passage height Z = 350 mm with H50 suction cups OF0165 Axis travel speed for Accord 40 fx PRO-SPEED version OF0168 Pendulum mode OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via internet 450328 eye-M PRO operating console with integrated PC 450291 Additional fixed operating panel 870068 TECPAD - remote control for machine functions 560058 No. 10 MATIC support rails - L1825 230429 MAXI processing unit - Prisma KT 1 870046 Preparation for right-angle head "Prisma KT-KS" 470014 Air nozzle for tools 870119 Tool length measuring device 870120 Panel thickness measuring device 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 support rails 510205 Preparation for clamping jaws for worktable with 10 support rails 480178 Front stop row H110 for worktable with 10 support rails 480105 Rear stop row H110 for worktable with 10 support rails 480137 First side stop row H110 for worktable with 10 support rails 480005 Suction cups H110 145x145 mm, 36 pcs 480006 Suction cups H110 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC support rail 10 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving systems 210837 TR12 – side tool magazine Iodpfoyfgzdox Agfotl 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-Machine Interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operation interface software Maestro cnc OF0435 Maestro cnc hardware dongle 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED: - Increased max. panel width for complete machining up to 2,120 mm; beam length remains unchanged at 1,900 mm. - 10 support suction cups for offcuts. MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE NEW 2023 EUR 399,890.--

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Ijdpfx Agjd Akyzofotl Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Ijdeiiynnepfx Agfjtl Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: Itjdjd Etkhepfx Agfol - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Itedpfxsxqggcj Agfol Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Itedpfoitvkusx Agfsl Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!