Scm Fs 410 Nova nakup rabljenega (576)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Kfsdpfetwzyfox Ah Aoa Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: rabljeno, težka precizna formatna krožna žaga SCM SI 550 E Class Kedpfx Aox Id Afeh Aofa Različica: tesarstvo - mizarstvo Dolžina reza: 3200 mm Širina reza: cca 1500 mm Glavni motor: 11 kW 3 hitrosti: 2500/3000/4200 o/min Kotni prislon z dolžinsko kompenzacijo Žagin list do Ø 550 mm Električno dvigovanje in nagibanje žaginega lista z digitalnimi prikazi Stroj iz upokojitve / prva dostava 2011 Stroj delavniško pregledan, v VRHUNSKEM STANJU Na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2007, Vreteno nagibno: Da, -45 do +45° Višinsko nastavljanje: električno / pozicijsko upravljanje Nagibno nastavljanje: električno / pozicijsko upravljanje Nastavitev rezkalnih čeljusti: električno / pozicijsko upravljanje Prikaz višine: digitalni Prikaz nagibnega kota: digitalni Prikaz rezkalnega prislona: digitalni Premer rezkalnega vretena: 30 mm, 40 mm, vpenjalna puša za stebelne rezkalnike Število obratov: brezstopenjsko Moč motorja: 7,5 kW Motorna zavora: da, avtomatska Priključek za odsesavanje: 2 x 120 mm Kfsdox I Aiwjpfx Ah Aja Dolžina stroja: 2600 mm Globina stroja: 1400 mm Teža: 1100 kg

Stanje: rabljeno, Leto izdelave: 2022, vklj. 2. lepilni bazen Debelina lepljenja za valjasto robno: 0,4 - 3 mm Debelina lepljenja za trakasto robno: 5 mm Min - maks. višina obdelovanca: 8 - 50 mm Podajalna hitrost: 9 m/min. Predrezalna enota Lepilna enota Odkrajševalna enota Zaoblitvena enota Poravnalna rezkalna enota Radijska strgala Ploska strgala Polirna enota Razpršilna naprava Kfedjw Aig Sspfx Ah Asa Lokacija skladišča: stranka

Stanje: dober (rabljeno), Koda: 0278 Znamka: TECNOMAX SCM Model: ST 4 ELITE - CE standard Krožna žaga z nagibnim listom in označevalno enoto za mizarje, izdelavo pohištva, lesenih oken, vrat, panelov in različno – CE standard Kjdpfxex Ivuas Ah Aefa Tehnični podatki: Dolžina vozička za formatiranje: 3200 mm Nagib lista: 90-45 stopinj Maksimalni premer žaginega lista z nameščeno označevalno enoto: 315 mm Maksimalna višina reza žage nad mizo pri 90°/45°: 100/70 mm Širina reza pri paralelnem vodilu: 1000 mm Premer lista označevalne enote: 100 mm Vreteno za rezkanje Uporabna dolžina vretena: 125 mm Hitrost vrtenja vretena (obr/min): 3500/6000/8000/10000 Maksimalni premer orodja: 210 mm Trofazni motorji: 5,5 Hp Premer priključka za odsesavanje: 120 mm Skupne dimenzije sestavljenega stroja: 3600 x 3000 x 1100 h mm Transportne dimenzije: 3600 x 1600 x 1100 h mm Teža: 645 kg

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Kfedpfx Aheitvkue Aea Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: rabljeno, SCM TECH 99 L CNC obdelovalni center z rezkalno enoto za ključavnice Stroj je DELOJOČ in pripravljen za demonstracijo iz upokojitve/obrtne delavnice Ksdpfex H Nndex Ah Asfa Na voljo na lokaciji mizarstva, kot videno

Stanje: rabljeno, Leto izdelave: 2007, Workspace: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel X-Y: 2980 x 1271 mm. Z-axis travel: 200 mm. Clearance height: 180 mm. The base structure is a monolithic design made of thick-walled steel, reinforced throughout the entire machine bed by fully welded triangular plates, resulting in extreme rigidity. The triangle shape with a wide base, used for all load-bearing components, is the secret to ensuring lasting precision and stability. The machine layout provides the operator with an optimal workflow while requiring minimal space. This base structure offers the machining unit a balanced and secure foundation with outstanding load distribution. The mobile aggregate support is constructed as a solid monoblock. It travels along the X-axis on precision-ground linear guides by means of recirculating ball bearing carriages. The machining unit is mounted to the mobile support via precision-ground linear guides and ball bearing carriages as well. Description of aggregates and standard accessories: Drilling unit: Drilling head with 10 + 4 spindles · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Chuck: M10 with 11 mm locating pin · Extraction port: D = 160 mm Vertical milling unit (Position 2) · Tool holder: HSK 63F · Speed: 1,500 - 24,000 rpm, variably adjustable via inverter · Motor output: 4.4 kW (6 HP) from 12,000 rpm (S1) · Clockwise / counterclockwise rotation · Ceramic bearings · Delivery includes: 4 tool holders (right), without collets Tool changer · Side-mounted tool magazine for 7 tools (TR7), fully enclosed to protect against chips · 7 tool stations for HSK 63F holders in sequence · Max. tool diameter: D = 120 mm · Max. weight per holder: 4.5 kg · Max. total tool weight: 20 kg (TR7) · Angle heads can be accommodated Kfjdpfxew Aifze Ah Aoa Horizontal milling unit (Position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 - 18,000 rpm, stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D = 120 mm / bore 50 mm) · Motor output: 3 kW (4 HP) · Max. tool diameter, front milling: 20 mm · Max. tool length, front milling: 110 mm · Max. tool diameter, rear milling: 12 mm · Max. tool length, rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade spindle diameter (ER 20): 12 mm Worktable The worktable is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system ensures maximum flexibility for precise positioning and optimal holding of workpieces. · 4 supports, 900 mm, infinitely variable adjustment in X · 8 round vacuum pods D = 110 mm, infinitely adjustable in Y (2 per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total: 6) · The retractable reference stops are CNC-controlled · Supplied: 4 plug-in adapters for suction pads · Standard feature: pendulum (dual-zone) operation Axis movement The drive system in X, Y, and Z uses ground recirculating ball screws of the highest precision class. The X-axis ball screw is positioned exactly along the centerline...

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 – 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 15.0 with inverter Feed speed variable m/min: 3.5 – 18 Working units: 1st unit: "RA" diagonally grooved steel contact roller, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments C version: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/pad unit - Sector activation via electronic control, synchronizing engagement with the feed speed and regulating the number of segments based on workpiece geometry, enabling selection of more or fewer sectors on the left and right sides of the workpiece. - Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing bar at the infeed Additional features: Roller table in infeed and outfeed for long workpieces Perforated table and feed belt Vacuum table with integrated 4 kW (5.5 HP) electric fan in the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S software integration’ Kfjdpshtuvrsfx Ah Aja ATTENTION: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: rabljeno, Leto izdelave: 2006, · Working area: 2,650 x 1,240 mm · Travel range X-Y: 2,995 x 1,385 mm · Z-axis travel: 200 mm · Clearance height: 180 mm The machine base structure is a monolithic design made of thick-walled steel. It is reinforced with welded triangular plates across the entire machine bed, providing exceptional stability. The use of the triangular shape with a broad base for load-bearing components is the key to long-lasting precision and stability. The layout of the machine allows the user to achieve optimal workflow while requiring minimal floor space. This design gives the processing unit a balanced and secure foundation with excellent load distribution. The moving aggregate carrier is constructed from a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball carriages. The processing unit itself is mounted on this mobile carrier, also on prismatic, ground guides and recirculating ball carriages. Description of units and accessories (basic version) Drilling unit: Drill head with 12 + 6 spindles · 7 individually activatable vertical spindles in X · 5 individually activatable vertical spindles in Y Kfedpjx Iwc Sofx Ah Aea · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm locating shoulder Grooving saw unit in X: · Integrated in the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed 1,500 – 24,000 rpm, steplessly via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Scope of delivery: 4 pcs. tool holders (right) without collet Tool changer R8L Automatic tool change system for 8 tools. Mounted on the rear aggregate carrier for rapid tool access. · Number of tool places: 8 · Max. tool diameter: 120 mm · Max. tool weight: 4.5 kg · Max. total tool weight: 22 kg · Holder for 1 angle gear · Moves in X-direction Horizontal milling unit (position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed 9,000 – 18,000 rpm steplessly via inverter · 1 output for collets 3–20 mm (ER32) · 1 output for saw/collet 3–12 mm (ER20) (For saw D=120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. milling diameter front: 20 mm · Max. milling length front: 110 mm · Max. milling diameter rear: 12 mm · Max. milling length rear: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table The work table is designed to guarantee the operator maximum range of motion. The vacuum quick-clamping system provides maximum flexibility with precise positioning and optimal workpiece holding. · 6 rails, 1000 mm, continuously adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, continuously adjustable in Y (2 pieces per rail) · 2 stops in X (1 left / 1 right) · 1 stop in Y per rail (total 6 pcs) · The retractable reference stops are CNC-controlled · Pendulum machining standard (2 working zones) --- Other clamping systems available as options --- Axis movement The drive system in X, Y, and Z axes operates via ground recirculating ball screws of the highest precision class. The ball recirculation...

Stanje: novo, Equipment: Kfedscrnm Nspfx Ah Aoa 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: novo, SCM gabbiani p90 Panel Sizing Saw - Demonstration Model - Special Offer! Technical Specifications: Saw blade projection: 90 mm Working table height: 950 mm Number of standard clamps: 5 Kfedpeiz A Amefx Ah Aoa CUTTING DIMENSIONS: 3300 x 3200 mm Variable saw carriage speed: 6 - 60 m/min Variable pusher speed: 0 - 60 m/min Saw blade motor power: 7.0 kW Speed: 4650 rpm Saw blade diameter: 340 mm Saw shaft diameter (main blade): 80 mm Scoring unit motor power: 1.5 kW Speed: 5850 rpm Scoring blade diameter: 200 mm Scoring blade shaft diameter: 80 mm Compressed air requirement: 300 NL/min Operating pressure: 7.0 bar Extraction air requirement: 2440 m³/h Extraction air velocity: 20 m/sec Extraction port diameter: 4 x 120 mm Including the following options: 590134 Cutting depth 3200 mm (Version 33) OF0263 eye-M operator console with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation (without gateway) for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with rollers, located on the longitudinal fence side 590246 Fixed air cushion table 2500x800 mm with rollers and reinforced fan 590239 2 x Movable air cushion tables 1500x600 mm with rollers and reinforced fan 590244 Saw carriage with independent lift control for saw and scoring blades 590245 Optimized vertical lift for the saw blade in 2 stages (medium/maximum) 590143 Grooving unit with manual blade height adjustment 590241 Grooving function (forward/backward movement of the saw carriage) 590164 Double automatic side aligner 301230 Foot switch for cycle start and stop 590044 Compact labeling unit - Label printing with barcode 590144 4 x Additional clamps 900088 Magnetic tape monitoring for pusher position 102015 European safety regulations (CE marking) 109993 MACHINE LANGUAGE: German

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!) Kfjdshvan Ijpfx Ah Aoa

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: Kodpfx Ahodd Hi Ee Ajfa - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Ksdpfxjr A Eq Ro Ah Asfa Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Kfedpfx Ahsiknp Ro Asa Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Kfjdpfoiiv Dcox Ah Asa Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle configuration: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. Kfjdpfxjg Umrmo Ah Aea (We only respond to inquiries with your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Kfedpoc S Di Rofx Ah Aea Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Work table dimensions: 600 x 520 mm Work table height: 900 mm Kfjdpfx Asdibw Ash Asa Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: novo, Leto izdelave: 2022, The new universal CNC drilling machine, ideal for woodworking shops and craftsmen, featuring an excellent price-to-performance ratio. Machine including options: - Sensor for alignment of the panel on the opposite side - Pressure booster on the Z-axis - Automatic lubrication - Machine control interface software "Maestro cnc" - QWERTY keyboard - 10'' touch screen Max. workpiece dimensions (X-Y-Z): 3000 x 900 x 50 mm Min. workpiece dimensions (X-Y-Z): 300 x 90 x 10 mm Max. travel speed of X-Y axes: 20 m/min Number of spindles X-axis: 2 Number of spindles Y-axis: 2 Number of spindles Z-axis: 7 Kfsdpjfhy R Nofx Ah Aja Grooving saw blade: DM 125 mm Note on used machines: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, loaded and ready for collection. • The machine has been cleaned and function-tested. • All machines are purchased as-inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines onsite. • Special agreements are only valid in written form. (We only respond to inquiries including your full address and telephone number!)

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks Ksdpfx Ajd Supgoh Aofa - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. Kfedjd Etkhspfx Ah Aja • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Edge banding machine SCM Model: Olympic 500 HP 'T-ER2' Offer Type: LEASE RETURN, Used Machine Availability: Immediate Location: In stock Condition: As new Year of manufacture: 2023 GENERAL INFORMATION: A complete and versatile edge banding machine designed for small and medium-sized businesses, capable of processing a wide range of materials with a high quality standard while requiring minimal space. The SCM Olympic 500 is equipped with an electronic adjustment device and allows the machining of 2 radii, each with its own tool, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for human-machine interface (HMI) • Maestro connect: preconfigured for later installation without gateway • Dual radius machining, chamfering on all units with multi-knife tools - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed KIT “SAV€NERGY” Internal lighting for the cabin and gluing area “Nesting” sensing roller KIT “Separating agent” spray unit “AAR” Spray unit for post-processing the edge Spray unit for sensitive edges Jointing cutter unit “RT-V1” “EASY SIZE” device – electronic quick setting for jointing cutter unit Glue application unit “VC-VM” Ceramic infrared preheating lamp for workpieces Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ – automatic switching between straight / R/R positions for the “Round 2-A Multiedge 1R” unit Radius scraper unit "RAS-HP Multiedge 2R" Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German Kedpfx Ahjq A Tyzj Aofa TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL LEASE RETURN PRICE!!

Stanje: novo, Multi-combination machine with aluminium sliding table for sawing, milling, surface/thickness planing and optional slot mortising Torsion-resistant steel/cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodised aluminium sliding table, 10-year SCM warranty on sliding table guides Large crosscut frame with extendable aluminium telescopic fence and fold-away stops With combination saw/miter fence with 45° quick adjustment Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° Helically geared steel infeed roller for consistent wood feed during thickness planing Four spindle speeds, manually adjustable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Equipped with a proven ball contact system, used millions of times Permanently smooth operation due to hardened and ground guides Not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The extraction ports for surfacing and thickness planing are on the same (right) side. The extraction hose can therefore be used from the same side for both planing modes. Helically geared steel infeed rollers for constant and uniform workpiece feed Massive anti-kickback devices for operator safety 3-knife cutter block for optimal planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of the saw blade: 1660 mm Cutting width at rip fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. Table dimensions: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. material removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Ksdpfx Ajiiyppsh Aefa Max. tool diameter retractable: 180 mm Spindle speeds: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Extraction port Ø saw blade guard: 60 mm Weight: 430 kg OPTIONS: - Professional fences: EUR 300 Saw fence with quick locking and micrometric adjustment Planer fence 90° ÷ 45°, continuously adjustable - Scoring unit incl. saw blade: EUR 292 - Handwheel with digital readout for thickness table positioning: EUR 129 - Mobility kit: EUR 119 - 2 additional handwheels for aggregate adjustment: EUR 45 - TERSA cutter block, Ø 72 mm: EUR 212 - Xylent spiral cutterhead, 3 rows of knives: EUR 717 - Aluminium slot mortising unit: EUR 390 - 2 stop flaps for crosscut fence: EUR 150