Scm F 410 nakup rabljenega (659)

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dwodpfxohkz E Te Apwjc Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Refurbished four-sided planer moulder by SCM GROUP. This four-spindle machine enables high-quality, precise planing and is equipped with a noise-reducing safety enclosure. Its simple, proven design ensures long-term durability and machine performance. Designed for small workshops producing simple battens, edge-glued panel blanks, processing window scantlings, and similar applications. With its capacity, this four-sider is also suitable as a pre-processing unit for a window manufacturing machining centre. Maximum workpiece size: 180 x 105 mm Aluminium planer heads included in the machine price Possibility to fit profile tools up to 10 mm Including surcharge option: pressure wheel in front of the tool Technical Specifications: Minimum/maximum working width up to 23 / 180 mm Minimum/maximum working height up to 6 / 105 mm Usable spindle length vertical/horizontal: 120 / 190 mm Spindle axial adjustment: 15 mm Horizontal spindle motor power: 7.5 kW Vertical spindle motor power: 5.5 kW Feed motor power: 1 kW Infeed table length: 1700 mm Feed speed: 6/12 m/min Working motor speed: 6000 rpm Tool diameter: 100 mm Spindle diameter for tool mounting: 35 mm Dodpfxewbgtgo Apwewc Feed roller diameter: 120 mm Extraction connection: 160 mm Weight: 1200 kg Equipment refurbishment status and machine readiness for collection must be verified in advance! In stock at Telnice u Brna Testing, machine demonstration and operator training naturally provided

Stanje: rabljeno, Leto izdelave: 1991, Izvedba: fiksna Velikost mize: 1200 x 730 mm Višina mize: 900 mm Število vrtljajev: 3000/4500/6000/7000/10000 vrt/min Premer vretena za rezanje: 30 mm Uporabna dolžina vretena: 180 mm Vreteno: desni/levi tek: da Prikazovalnik števila vrtljajev: optični Avtomatska zavora motorja: mehanska, nožna zavora Izvedba opornih čeljusti: sistem opornih čeljusti Aigner Nastavitev opornih čeljusti: ročna Prikazovalnik za oporno čeljust: ni Naprava za podajanje: z 3 valji Dsdjz Nnyyjpfx Apwowc Položaj nadzorne plošče: spodaj Teža: približno 600 kg Moč motorja: 4 kW Premer odsesalne cevi: 120/120 mm Lokacija skladišča: Rieth

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina 950 mm Djdpfx Asz D Ackspwowc kalibracijska enota z kovinskim valjem kombinirana enota z gumijastim valjem in samodejno nastavljivim čeveljčkom zagon zvezda-trikot pnevmatska oscilacija, krmiljena s fotocelicami dve hitrosti pomika transporterja moč motorja 7,5 kW leto izdelave 2000 napajanje 400V teža 976 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, SCM P64, štirismerna reškalna strojnica Dolžina reškalne mize: 2300 mm Djdsz Ii A Ejpfx Apwjwc Širina reškalnega valja: 180 mm Višina reškalnega valja: 105 mm Hitrost podajanja: 6 in 12 m/min Premer vretena: 35 mm Aksialni nastavek reškalne glave za profiliranje: 15 mm Moč motorja za reškalno operacijo: 4 kW Moč motorja za operacijo določanja debeline: 4 kW Moč motorja za desni in levi valj: 5,5 kW Teža: 1200 kg Dimenzije: 2820 x 1220 x 1920 mm Stanje: Preverjena funkcionalnost.

Stanje: zelo dobro (rabljeno), strigalni stroj SCM S630 Maksimalna širina striganja: 630 mm, Maksimalna višina striganja: 240 mm, 4 rezila, električno dvigovanje, brezstopenjska nastavitev hitrosti podajanja, 2 valja na mizi, nastavljiva, digitalni prikaz višine, 3 vlečni valji (2 valja za izmet materiala), Motor: 5,5 kW, Dsdoz I N S Hspfx Apwswc tiho delovanje, stroj v odličnem stanju.

Stanje: rabljeno, Leto izdelave: 2016, Delovno območje X-Y-Z: 5300 x 1700 x 180 mm Dolžina giba X-Y-Z: 6040 x 1810 x 280 mm Vrtalna glava s 30 + 8 vreteni Hitrost vrtenja: 6000 1/min Moč: 2,2 kW Avtomatsko centralno mazanje Delovna miza TV s 10 oporami, L = 1500 4 delovna območja 2 križni laserji Vakuumska črpalka, 250 m³/h Računalniško upravljanje Windows Vertikalna rezkalna enota ISO 30, 7,5 kW, z menjalnikom orodij RAPID 14 in vektorjsko osjo Dodatna vrtalna enota (os E) Dwodpfx Apoy Dta Sjwsc Ključek (dongle) za programsko opremo XILOG Lokacija skladišča: Sonnefeld

Stanje: rabljeno, kombinirana strojna oprema za ravnanje in žaganje Dsdpfjz Ef Ifsx Apwewc proizvajalec: SCM LINVINCIBLE tip: 2200 širina žaganja: 50 cm višina prehoda: 20 cm 3-rezilna valjčna glava 2 hitrosti podajanja nastavljiv vodilni nastavek za ravnanje nastavljivi drsni valji na mizi za žaganje Stanje glejte na slikah, oziroma upoštevajte opis izdelka. Dele lahko tudi sami prevzamete. Vse mere so približne. Vse informacije so podane v najboljši možni meri, vendar brez garancije. Pridržujemo si pravico do spremembe cen. Stroški pošiljanja so okvirni; glede na razdaljo in možnost razkladanja se lahko razlikujejo. Izdelke lahko sami prevzamete ali pa vam jih pošljemo na vaše stroške. Navedena prodajna cena je neto znesek, kateri se prišteje DDV. Račun z navedenim zneskom DDV je priložen izdelku. Osnova za garancijo: Zaradi obrabe in dotrajanosti pri rabljenih delih se izdelki na splošno prodajajo kot okvarjeni – samo za rezervne dele, in sicer izključno podjetjem. Kupec s predložitvijo svoje ponudbe sprejema to kot temelj kupne pogodbe. Če je predmet prodaje rabljen izdelek, znaša garancija 12 mesecev, če kupec nastopa kot potrošnik v smislu člena 13 nemškega civilnega zakonika (BGB). Če kupec nastopa kot podjetnik v smislu člena 14 nemškega civilnega zakonika (BGB), je vsaka garancija izključena. Če je predmet prodaje nov izdelek, znaša garancija 24 mesecev, če kupec nastopa kot potrošnik v smislu člena 13 nemškega civilnega zakonika (BGB). Če kupec nastopa kot podjetnik v smislu člena 14 nemškega civilnega zakonika (BGB), znaša garancija 12 mesecev.

Stanje: rabljeno, Leto izdelave: 2007, Dimenzije delovne mize: 3050 x 1240 mm Prehod: 170 mm Gib osi X-Y-Z: 3500 x 1790 x 340 mm Glavna rezkalna enota: Elektrovreteno z vpenjalom HSK 63 F Območje hitrosti od 600 do 24000 1/min, brezstopenjsko nastavljivo preko inverterja Moč motorja 8,5 kW pri 12.000 1/min (S1) Vrtenje v levo/desno Os vrtenja Vector (os C): Za uporabo kotnih reduktorjev. Kotni reduktor Mimatik HSK 63 F Menjalnik orodja RAPID 12 (gibljiv) Vrtalna glava F11 z enoto za rezkanje utorov -7 neodvisnih navpičnih vreten (4 desne in 3 leve) -4 horizontalnih vreten (1+1 vreten na osi X / 1+1 na osi Y) Integrirana, neodvisna enota za žaganje utorov z žago DM 120 mm Delovna miza ALU Vakuumska črpalka 250 cbm/h Moč 5,5 kW Maksimalni vakuum (priklop): 0,9 bar Nadzor: ESA-GV KVARA 6 z pisarniškim računalnikom Uporabniški vmesnik: Xilog Plus Operacijski sistem: Windows XP Kabelski daljinski upravljalnik Osrednji priključek za odsesavanje: 200 mm Teža: pribl. 2700 kg Potreben prostor: pribl. 5700 x 4100 x 2600 brez omarice za nadzor Omarica za nadzor 600 x 800 x 1900 mm Djdpfezr H Ivox Apwowc Lokacija skladišča: Dobavitelj

Stanje: rabljeno, Leto izdelave: 2006, število osi: 3, delovna širina: 2.040 mm, delovna dolžina: 3.680 mm, TEHNIČNE PODROBNOSTI NAČIN OBDELAVE Način obdelave: vrtanje in frezanje DELOVNI PROSTOR Delovni prostor osi X: 3.680 mm Delovni prostor osi Y: 2.040 mm Število delovnih prostorov: 2 Število nadzorovanih osi: 3 DELOVNA MIZA Vrsta mize: ravna miza / miza za gnezdenje Število miz: 1 Širina mize: 3.680 mm Dolžina mize: 2.040 mm Material mize: aluminij VRTALNA ENOTA Število vrtalnih enot: 1 Položaj vrtalne enote: zgoraj Vertikalne vrtalne glave: 7 Horizontalne vrtalne glave, smer X: 2 Dwodpez Enz Uefx Apwoc Horizontalne vrtalne glave, smer Y: 2 Skupno število vrtalnih glav: 11 FREZALNA GLAVA Število frezalnih glav: 1 Položaj frezalne glave: zgoraj Nadzorovane osi: 3 Moč motorja: 13 kW Število vrtljajev: 24.000 vrt/min Samodejna menjava orodja: da SKLADIŠČE ORODIJ Število skladišč orodij: 1 Število mest za orodja: 12 Skladišče orodij: nameščeno na vrhu VAKUUMSKI SISTEM Število vakuumske črpalke: 1 Sesalna moč: 250 m³/h NADZOR IN PROGRAMSKA OPREMA Nadzor: PC-nadzor Programska oprema: Xylog Plus PODROBNOSTI O STROJU GLAVNI POGON Moč glavnega elektrovretena: 13 kW VARNOST CE oznaka: da Zaščitna ograja: trajno pritrjena na stroj Varnostni sistem: sprednje varnostne preproge OPREMA Aluminijasta miza za gnezdenje Sesalne prijemalke za pritrditev obdelovancev Vakuumska črpalka Vrtalna enota z 11 vrtalnimi glavami Frezalna glava s samodejno menjavo orodja Skladišče orodij z 12 mesti za orodja PC-nadzor Programska oprema Xylog Plus Zaščitna ograja, trajno pritrjena na stroj Sprednje varnostne preproge

Stanje: zelo dobro (rabljeno), Strugalni stroj SCM minimax Širina struganja 400 mm, Motor 5 kW, 3 noži, 1 hitrost podajanja, Ročna nastavitev mize, Dsdpfx Apez Izcdowswc Maksimalna debelina struganja 230 mm, Dolžina miz za planiranje 180 cm, Nagibna miza. Odlično stanje.

Stanje: novo, Working width (finished size): 23–180 mm Dsdpfjiiv Dcsx Apwowc Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, širina brušenja: 1.100 mm, delovna višina: 150 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.150 mm, Trakovna brusilka SCM Sandya 10 Delovna širina 1100 mm Delovna višina 5–150 mm Število brusilnih enot 2 1. Kalibracijski valj iz kovine 2. Kombinirana enota z valjem Kombinirana enota z odpihovanjem brusilnega traku Dve hitrosti podajanja Merilnik debeline materiala Glavni motor z močjo 15 kW Masa stroja 1750 kg Dimenzije stroja: 165 x 186 x 206 cm (V) Dwedpfx Asz Huwrepwsc

Stanje: zelo dobro (rabljeno), SCM S 52, stroj za ravnanje in grobo obdelavo - Največja širina ravnanja 52 cm - Največja višina ravnanja 24 cm - Električna nastavitev višine ravnanja - 4 standardna noža - 4 nastavljive hitrosti podajanja - Valj na mizi Dedpfx Ajz I Ihtopwewc V zelo dobrem stanju.

Stanje: zelo dobro (rabljeno), SCM Sandya 1K Kombinirano agregatno vozilo s jeklenim valjem in brusilnim podplatom. Glavni motor: 11 kW. Dwedpfx Aoz I Iikjpwjc Stroj je v zelo dobrem stanju.

Stanje: novo, Leto izdelave: 2026, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Dwsdpfx Apsd Hx Hmjwjc Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, ST 3 classic F 23 – Combined Saw and Spindle Moulder Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and cast iron construction Large support surface and precise cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45° Saw rip fence with fine adjustment Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 manually adjustable spindle speeds from 3,500 – 10,000 rpm Spindle moulder with forward/reverse rotation Standard arc-shaped spindle guard Two 5.0 kW motors with high performance reserves Cast Iron Spindle Moulder Unit secured at the top on both sides precision ball bearings at the top close to the pivot point four optimally graduated spindle speeds allow for sharpening of workpieces Powerful Motors Industrial motor, 100% duty cycle for continuous operation at full load Scope of Delivery: Arc-shaped spindle guard Anodized aluminium sliding table Dwsdpfxjcnwyde Apwjc Aluminium fence jaws Folding stops Technical Data Cast iron table dimensions: 1112 x 430 mm Edging length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscut length: 2660 mm Saw blade tilt: 90° - 45° Cutting width: 900 mm Speed: 4000 rpm Table router: - Spindle tilt: 90° - 45° Useable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. tool diameter, retractable: 180 mm Speeds: 3,500/7,000/10,000 rpm General: - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction ports diameter: 2 x 120 mm Saw blade guard extraction port diameter: 60 mm Location: From stock, 54634 Bitburg - Immediately available -

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Dodpfx Asvwd U Iopwswc Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Max. working height (thickness): 240 mm Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: zelo dobro (rabljeno), Obrobnica robov SCM Olimpic K100 predrezala, nanos lepila z valjem, Rezervoar ima funkcijo zamenjave. pneumatična predrezalna žaga, tlačilni valji, obrezovalne kroglice (spredaj-zadaj), rezalna enota za obdelavo zgornje in spodnje strani R1 – R2, profilna obdelava, Dsdpfx Asz E U Hdepwswc ravna obdelava, dolžina stroja 320 cm, hitrost podajanja 7 m/min, maksimalna višina obdelovanca 50 mm, maksimalna debelina robnega traku 3 mm.

Stanje: zelo dobro (rabljeno), Obroba stroj SCM K360 HP Težke tekočine Predrezalniki, Predgrevanje plošče Nanašanje lepila z valjem, Izmenljiva posoda Pnevmatska predrezalna žaga, Rezalne glave za končno obdelavo Rezalna enota za obdelavo zgornje in spodnje strani (večrezalna enota R1-R2), Enota za obdelavo vogalov, Profilna cikla (večprofilna R1-R2), Ravna cikla, Težke tekočine Polirka Dwjdpfx Apoz Hl E Tjwjc Stroj ima numerično krmiljenje (NC). Maksimalna višina obdelovanca: 60 mm. Maksimalna debelina furnirja na roli: 3 mm. Napredovanje: 11 m/min. Dejanska poraba: približno 19.000 metrov, po mojem mnenju je tehnično stanje zelo dobro. Možnost pregleda in testiranja na kraju samem.

Stanje: rabljeno, Leto izdelave: 1995, Strojal za obdelavo robov, proizvajalec SCM, model Superset 23 Plus, 6 valjev + 1 univerzalni Sestava: - spodnji valj, 5,5 kW - desni valj, 5,5 kW Dwodpfxjz Izqzs Apwec - levi valj, 7,5 kW - desni valj, 5,5 kW - zgornji valj, 7,5 kW - spodnji valj, 5,5 kW - univerzalni valj, 5,5 kW - pogonski motor, 5,5 kW - bližnje pogonske role za kratke kose - opremljen z certifikatom CE in navodili Dodatna oprema (lahko prodamo samo stroj ali celoten sklop): 926033 Rezalni stroj s podajalnikom, proizvajalec Friulmac, model FN3 926035 Rotirajoča miza za vračanje kosov 926034 Transportni trak za vračanje kosov Minimalna višina obdelave: 6 mm Maksimalna širina obdelave: 230 mm Maksimalna višina obdelave: 120 mm Premer valjev: 40 mm Dolžina navpičnih valjev: 150 mm (uporabna dolžina 130 mm)

Stanje: rabljeno, Leto izdelave: 2000, Rabljeni stroj Leto izdelave: 2000 T 110 je mizarska vrtalno-rezalna miza SCM, kjer sta kakovost in ugodna nabavna cena optimalno združena. Izredno stabilna konstrukcija. Za udobno upravljanje so vsi upravljalni elementi nameščeni v dosegu na sprednji strani stroja. Natančna nastavitev višine orodja je zagotovljena z mehanskim prikazovalnikom. Nagib vretena od -5 do +45 stopinj. Velikost mize: 1000 x 750 mm. Dolžina pritrditve vretena: 140 mm. Prevzem vretena nad mizo: 20 mm. Hitrosti vretena: 3000-4500-6000-9000-10000 obr/min. Djdpfezk N Rdjx Apwjwc Največji premer orodja, ki ga je mogoče spustiti pod mizo: 320 x 40 mm. Profilno orodje največ 250 mm. Motor 4 kW. Premer odsesovalnega priključka: 120 mm. S 3-valjnim podajalnikom. Teža: 520 kg. Razpoložljivost: takoj. Lokacija: Röllbach.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Mešalnik z nagibnim gredom. Dwodpfoz Evf Uex Apwoc

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Dwedpfx Apoiiynnjwoc Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: rabljeno, CNC obdelovalni center Proizvajalec: SCM Tip: Morbidelli Author 430S Letnik: 2006 Tehnični podatki - Delovno območje: 1300x3600x180 mm - Opremljen z vretenom za rezanje, vrtalno enoto in žago - Horizontalne obdelovalne enote - Originalna programska oprema SCM - Stroj je v dobrem delovnem stanju. Dwsdpfsz Inkbex Apwec Opomba: Tehnični podatki in opisi so kopije prvotne potrditve naročila. Podatki so namenjeni samo informacijskim namenom in niso zavezujoči.