Rezkalni Stroj nakup rabljenega (75.525)

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens Tjdpfxsrqwbie Abgef • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel Maho DMU 50M with Heidenhain TNC 124 Path Control – Excellent Condition! Technical Data: >> Year of manufacture: 1998 >> Heidenhain TNC 124 control system >> Travel: X500/Y400/Z400 mm Todpfxsr Hbf To Abgef >> C and B axis, manual adjustment with digital readout >> Spindle speed: 20–4500 rpm >> Feed rate: 5000 mm/min >> Rapid traverse: 5 m/min >> Tool holder: SK 40 >> Table dimensions: Ø700 x 500 mm >> Swivel range: +95° / -10° >> Electronic handwheel >> Weight: 2800 kg >> Machine footprint: approx. 4.0 m x 2.5 m, height 2.6 m >> Coolant system >> Power connection: 400V, 32A About the machine: For sale is a Universal Milling Machine Deckel Maho DMU 50M equipped with Heidenhain TNC 124 path control, in very good condition. The table has two additional axes (B and C), adjustable manually with digital display. The control system is very user-friendly, supporting position input and approach, deep and thread drilling, drilling patterns, hole circles, hole rows, and rectangular pocket milling. Programs can be entered and read via an interface. The Heidenhain path control facilitates easier and even more precise operation. The milling machine was used for training purposes in a large company. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: popolnoma funkcionalen, potrebna širina: 1.400 mm, zahteva za prostor dolžina: 1.040 mm, potrebna višina: 1.900 mm, Oprema: dokumentacija / priročnik, Kopirni rezkalni stroj v vrhunskem stanju, možen prevzem s strani gravirja. 1 naprava za zmanjševanje in povečavo 1 vrtljiva miza s 3 lukenjskimi ploščami 1 optična tipalna naprava s fiksirnimi čeljustmi 1 pomična miza 1 zglobna svetilka 1 podaljšek za rezkalo Todpfxexw Nn Ao Abgef 1 nasadni rezkalni trn različne vpenjalne naprave in kopirne predloge 9 vpenjalnih tulec za rezkalno vreteno

Stanje: novo, The Servomill® FPK 500 is a state-of-the-art, conventionally designed milling machine in the milling machine category, offering not only ease of operation but also exceptional flexibility. This versatile tool milling machine is primarily used in toolmaking, production, and vocational training, and is distinguished by its robust construction and highly precise operation. Thanks to its integrated electronics, the Servomill enables conventional milling with a precision that is recognized throughout the industry. The machine features powerful servo motors that provide infinitely variable feed rates, as well as ball screw drives on all axes for long-lasting, maintenance-free use. Standard equipment includes accessories such as a high-performance coolant system and LED work lighting, both contributing to operational efficiency. The operator-friendly design with intuitive controls and simple electronic stops significantly simplifies handling. Purchase the Servomill FPK 500 now and take advantage of the benefits offered by this conventional milling machine! Tsdpfxswa Ah Re Abgef

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 2.132 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, skupna masa: 10.500 kg, največja hitrost vretena: 15.000 obr/min, delovne ure vretena: 5 h, V popolnem stanju ponujamo Hermle C400U. Pomik X-osi: 850 mm Pomik Y-osi: 700 mm Pomik Z-osi: 500 mm Vreteno HSK-A63, avtomatski menjalnik orodij za 38 orodij (ATC) Tsdpfx Abexy Itcegof Stroj ima Heidenhain 640 krmilje in samo 2100 delovnih ur. Opozorilo: stroj nima notranjega hlajenja in transporterja ostružkov.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, X = 400 mm, Y = 300 mm Brezstopenjsko nastavljivi pomiki, Stopnjevite hitrosti od 35 do 2200 obr/min Tedpfx Abjxwc D Dsgsf Vpenjanje ISO 40 • Glava za rezkanje z vrtalno pinolo • Univerzalna vrtljiva in nagibna miza

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, x-axis travel: 560 mm y-axis travel: 320 mm z-axis travel: 400 mm Spindle speed: 25 - 2,000 rpm Spindle speeds: 18 steps Spindle taper: ISO 40 Quill stroke: 100 mm Table size: 320 x 1000 mm / 450 x 950 mm Table load capacity: 125 kg Feed rate range: 5 - 400 mm/min Feeds: 18 steps Rapid traverse: 1,400 mm/min Maximum workpiece weight: 125 kg T-slots: 7 x 14.0 mm Tjdpfoxacc Eex Abgjf Total power requirement: 4.2 kW Machine weight approx.: 1,650 kg Dimensions (L x W x H): 1800 x 1500 x 1780 mm From a training workshop – in good condition (!!) Original price ~ EUR 25,000 - Supplied in tested condition – machine video available - ?v=2DcUYH1OMRQ Equipment: - Electro-mechanical universal milling machine - ACURITE 3-axis digital readout - Electro-mechanical adjustment of all axes (X/Y/Z axis) * Ball screw spindles on X and Y axes * Rapid traverse in all 3 directions * Electric locking of all axes - Electromagnetic brake for spindle stop * Hinged milling spindle safety guard - Coolant system - Lower chip tray - Vertical milling head with adjustable quill * Milling head rotates 90° * Tool holder ISO 40 with M16 internal thread - Fixed box table 950 x 450 mm * Number/size of T-slots: 7 pieces / 14.0 mm * T-slot spacing: 63.0 mm * Minimum distance between table base / spindle axis: 163 mm - Counter-support bracket for horizontal milling - Halogen lighting - Bellows cover on the vertical column guideway - 4x machine leveling feet - Central lubrication incl. reservoir - Original operating manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, EXCELLENT CONDITION Technical Data: >> Year of manufacture: 1990 Machine No. 2102-5046 >> Fixed angular table Tedpfju Um Erjx Abgof >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle support >> Vertical and horizontal quill - SK40 taper >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Coolant system >> Operating manual, spare parts list Additional information about the machine: Offered is a Deckel FP1 universal milling machine, year 1990, in very good condition. The machine has very little backlash on the handwheels and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed for all three axes is infinitely variable, and the machine is also equipped with rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain controller, you can enter dimensions which the machine will move to automatically. The FP1 was previously used in a training shop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this excellent machine under power on site.

Stanje: rabljeno, Leto izdelave: 1970, Teža 6,6 t Todpfxexuv H Tj Abgjf

Stanje: novo, The FPK 4.3 is a high-precision conventional milling machine from the renowned KNUTH range of tool milling machines. This versatile tool milling machine has proven itself in the mechanical manufacturing of tool and mold making, and stands out due to its compact design, providing both flexibility and ease of use. The machine frame is made of high-quality cast iron, ensuring high dynamic rigidity and lasting precision, while precision ball screws on all axes deliver optimum results. The infinitely variable main spindle drive offers high torque and generous travel distances, allowing for a wide range of applications. In addition, a comprehensive accessories package makes the machine ideal for repair shops as well as training and production departments. Clearly arranged control elements and the swiveling control panel ensure comfortable operation. Take the opportunity and request a quote for the FPK 4.3 today – a powerful solution in the category of conventional milling and tool milling machines. Tjdjuyh Dijpfx Abgof

Stanje: dober (rabljeno), številka stroja/vozila: 630, z vrtljivo (za-stran premakljivo) vertikalno glavo Velikost mize 300 x 1.430 mm Pomiki mize: vzdolž (X-os) 1.000 mm navpično (Z-os) 520 mm prečno (Y-os) 360 mm Vgradna višina pod rezkalnim vretenom cca 500 mm Izteg rezkalnega vretena min./max. 350 mm Vpenjalo vretena SK 40 Obrati vretena 25 - 1.200 min⁻¹ Pomik/hitri pomik 12–900 mm/min Tedpfxsbq Rugj Abgjf Pogon vretena ca. 3 kW Skupni pogon 3,4 kW – 380 V – 50 Hz Teža 2.400 kg

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Na voljo je vertikalni rezkalni stroj Deckel FP4NC s krmiljem Heidenhain TNC 355. Letnik izdelave: 1987, vključno z omaro za orodje in raznim orodjem. Hodi osi X/Y/Z: 560mm/500mm/410mm, dimenzije X/Y/Z: cca 1800mm/1600mm/2000mm, teža: cca 2400kg. Ogled možen po dogovoru. Tedexyk Upepfx Abgsf

Stanje: rabljeno, Moč motorja: 1,0 / 1,4 kW Vpenjanje vretena: MK 3 z vlečnim navojem Velikost mize ca.: 450 x 150 mm Tjdpjxv Am Nefx Abgef Teža (ocenjena) ca.: 600 kg Dimenzije (Š x G x V) ca.: 1 x 0,6 x 1,6 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier Tsdpfx Abetwlwzsgjf >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 2.000 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, največja hitrost vretena: 5.000 obr/min, Rabljena horizontalna rezkalno-vrtalna naprava z mobilnim stebrom STS model Performance z: Todpfx Aboxn Axiegof - pomik osi X 6000 mm - pomik osi Y 1200 mm - pomik osi Z 2000 mm - upravljalna enota Selca 4045D - 2 delovni mizi - dimenzija vsake delovne mize 3500 x 2000 mm - avtomatska glava 1°x1° - hitrost vrtenja vretena 5000 obr/min - orodjarna s 40 mesti - rotacijska miza OMR 4. os neprekinjeno 1000 x 1000 mm - hladilni sistem skozi vreteno, visok tlak 20 bar - standardni dodatki Brezplačno financiranje v 12/24 mesecih.

Stanje: novo, The UWF 5 is an outstanding conventional milling machine from KNUTH’s range of universal milling machines, distinguished by its large working area and a versatile milling head. This machine ensures precise machining thanks to its precision-ground guideways and robust construction from high-strength cast iron. On the UWF 5, the powerful servo axis motor enables motorized feed on all axes, while the milling table can be swiveled horizontally and the universal milling head is adjustable in two planes. With a table load capacity of up to 500 kg and extensive standard equipment such as a 3-axis position display and a coolant system, the UWF 5 is suitable for both training workshops and repair operations. Order now and benefit from the high production reliability and productivity increase that this conventional milling machine offers. Please note that the UWF 5 is classified under the milling machines category and the group of universal milling machines. Tedpfxsp Aucws Abgof

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. št.: 10614 Proizvajalec: CHIRON Tip: FZ 18 K Leto izdelave: 2001 Način upravljanja: CNC Krmilnik: SIEMENS SINUMERIK 840 D Lokacija skladišča: Halberstadt Država izvora: Nemčija X-hod: 630 mm Y-hod: 400 mm Z-hod: 630 mm Vpenjalna površina mize (D x Š): 970 x 470 mm Vpenjalo orodja: SK40 Orodna mesta: 40 Maks. dolžina orodja: 280 mm Maks. premer orodja: 78 mm Maks. teža orodja: 8 kg Tedpfx Abjxvw Saogjf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3, Heidenhain Digital Readout, Year 1994 – Excellent Condition! Technical Specifications: • Year of manufacture: 1994 • Rigid angular table • Spindle speed range: 40 – 2550 rpm • Infinitely variable feed in X, Y, Z axes: 0 – 2000 mm/min • Travels (X/Y/Z): 400/320/400 mm Tsdpfevyr R Njx Abgsf • Rapid traverse in all axes • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic drawbar system • Weight: approx. 1500 kg Equipment and Accessories: • 3-axis Heidenhain digital readout • Centralized electric lubrication • Machine leveling feet • Handwheels • Coolant unit About the Machine: For sale is a Kunzmann WF4/3 universal milling machine in excellent condition. The machine comes from a government entity and was only lightly used. Switching from vertical to horizontal milling is quick and easy by simply swinging the vertical head aside. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our facility.

Stanje: dober (rabljeno), Leto izdelave: 1985, Ref. št.: 10595 Proizvajalec: GILDEMEISTER MAX MÜLLER Tip: MD 6S Leto izdelave: 1985 Vrsta upravljanja: CNC Krmiljenje: EPL 4 Lokacija skladišča: Halberstadt Država izvora: Nemčija Tip nosilca orodja: 2 x VDI 50 Razdalja med konicami: 1765 mm Tsdexvw Rcjpfx Abgsf Prehod vretena: 101 mm Maks. premer vrtenja nad ležiščem: 720 mm Premer vrtenja nad prečnim suportom: 490 mm Maks. premer vpenjalne glave: 400 mm Pogonska moč: 50 kW Približna teža stroja: 16 t Območje vrtljajev: 10 - 2800 1/min Prijem pinole: MK 5 Dodatne informacije: - Oprema - Pogonska orodja - Konjiček - Avtomatski pomik pinole - Transporter za ostružke - Samodejna drsna varnostna vrata - Hidravlična luneta - 2 revolverski glavi

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 in Special Light Grey Paint with New 3-Axis K+C Digital Display Tedpfx Aou I Rm Nsbgsf Technical Data: • Mach. No. 5983, Year of manufacture approx. 1975 • Rigid angle table (newly refurbished) • Speed range: 40 - 2000 rpm • Feed and rapid traverse on 3 axes • Drive power: 2.2 kW • Travel X/Y/Z: 400/200/400 mm • Equipment: Vertical & horizontal spindle • Extendable vertical and horizontal quill - SK-40 taper • Drawbar system: S20x2 • Weight approx. 1,100 kg Accessories and Features: • 3-axis K+C digital readout, newly installed with manufacturer's warranty Display features: set reference points, set zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. • User manual for digital readout • Coolant system About the machine: For sale is a Deckel FP2 universal milling machine in good condition. The Deckel has very little backlash and all spindles move smoothly. The machine has been completely dismantled and newly painted. An oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes work easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from Training Workshop!! Technical Data: Tjdpfxoxuppue Abgef • Year of manufacture: 2010 • Machine No.: 347283 • Rigid angle table • Spindle speed: stepless up to 4500 rpm • Feed: stepless in 3 axes from 0 to 2000 mm/min • Rapid traverse (X and Y axis): 5000 mm/min Z axis: 4000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table surface: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical quill and horizontal quill – SK40 • Hydraulic drawbar system • Weight approx. 1800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Features: • Heidenhain TNC 320 CNC control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with very low operating hours. It was used exclusively for training purposes. The TNC 320 control is very user-friendly. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our site. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 CNC control are available. All machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Kunzmann WF4/3 with Heidenhain TNC 320 contouring control, in excellent condition, CE-compliant, from a training workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347281 - Fixed angle table - Infinitely variable spindle speed up to 4500 rpm - Infinitely variable feed on 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min Tedpjxupd Sjfx Abgjf - Travel X/Y/Z: 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic drawbar system - Weight approx. 1,800 kg - Space requirements approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Offered here is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 control. This machine is in very good condition and has very few operating hours. It comes from an operation where it was used exclusively for training purposes. The control is extremely user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal positions. Switching between vertical and horizontal setup is very easy due to the tilting vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann on site under power. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 control are available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control - Excellent Condition, CE Certified, from Training Workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347284 - Fixed angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic clamping system - Weight approx. 1,800 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping for vertical and horizontal operations - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, user manual for the control, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used solely for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple thanks to the folding vertical head. The guideways are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility. Tsdpfx Ajxupdlebgef A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls are available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF4/3 Universal Tool Milling Machine with Heidenhain TNC 320 CNC Control, Excellent Condition, CE-Compliant from Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4500 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min Tsdpfxjxupc Uj Abgsf >> Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very easy by tilting away the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been both mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. There are 7 pieces of Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from a Training Workshop! Tedpfx Asxupczsbgof Technical Data: - Year of manufacture: 2010, Machine No. 347285 - Fixed angle table - Speed: infinitely variable up to 4,500 rpm - Feed rate: stepless in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travels (X/Y/Z): 400 / 350 / 400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Quill stroke, vertical: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic tool clamping system - Weight approx. 1,800 kg - Space requirement approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Features: - Heidenhain TNC 320 CNC control system - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: For sale is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 CNC control system. This universal milling machine is in excellent condition with very low operating hours, previously used solely for training purposes. The control system is intuitive and user-friendly. The machine features hydraulic clamping for both vertical and horizontal setups. Conversion from vertical to horizontal operation is straightforward by swiveling away the vertical head. The guideways are regularly lubricated via the automatic central lubrication system. This Kunzmann has undergone both mechanical and electrical inspections in our facility. Take the opportunity to inspect and test the Kunzmann under power at our location. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 control are available. Machines are in stock and immediately available.