Raste Čistilec nakup rabljenega (304)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, High-pressure cleaning unit, high-pressure jetting device, high-pressure built-in jetter mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. Similar to PTC Salmon, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, ... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400 l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800 l water tank LxWxH: approx. 1,670x1,250x1,200 mm Unladen weight without water tank: approx. 300 kg Unladen weight with 400 l water tank: approx. 320 kg Unladen weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Output: 35 HP (26 kW) CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low engine oil pressure - LED indicator for clogged air filter - LED indicator for rpm monitoring - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass on/off - RPM adjustment +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage protection against high-pressure pump dry running with automatic shut-off feature. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½" and 80 m 3/8" high-pressure hose - Hose: 80 m ½" high-pressure hose (included) - Hose guide: Manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾" low-pressure hose - Hose: 35 m ¾" low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve Ijdpfxef Arugs Abxsth - Filtration degree: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control: - Engine on/off - Bypass on/off - RPM adjustment +/- - Hydraulic hose reel wind/unwind - Emergency stop button - Battery charger for radio remote control - 300, 400, 500, or 800 l (with steel frame) polyethylene water tank OPTIONS ON REQUEST: - Pulsation/booster pump - 50 or 60 m ½" high-pressure hose - 50, 60, or 80 m 3/8" high-pressure hose with G3/4" fitting ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Version with 2 HP hose reels - Mobile hot water generator 10 kW – 12 VDC - Kit with high-pressure spray gun, swivel joint, and quick coupling - Kit with high-pressure lance including 15° flat spray nozzle / rotary nozzle - Kit with high-flow lance - Kit with rotary nozzles - Kit with twin-head nozzles - Kit for water sandblasting lance - Kit for detergent injector - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Mounted in a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotary nozzles, chemical injectors, and a sandblasting kit. Comparable but not identical to machines from Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General Specifications: Itjdehf Nakspfx Abxeh ----- Drive motor output: 6.0 kW Voltage: 400V (50Hz) - 440V (60Hz) Current: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, obratovalne ure: 1.651 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G393, obratovalni tlak: 500 letvica, skupna dolžina: 1.175 mm, skupna višina: 945 mm, skupna širina: 760 mm, pritisk: 500 letvica, vrsta vhodnega toka: trifazni, lastna masa: 290 kg, vhodna napetost: 400 V, moč: 15 kW (20,39 KM), vhodni tok: 32 A, raven hrupa: 78 dB, tlak (maks.): 500 letvica, vhodna frekvenca: 50 Hz, tlak vode: 500 letvica, Spoštovani, Naprodaj je obnovljen Falch WheelJet 15 Elektro brez dodatne opreme. Ijdpfxsxugifo Abxjth 500 barov 15 l/min Priključek 32A Lep pozdrav, Ekipa STS-Reinigungstechnik

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device enables quick and cost-effective removal of contaminants. A significant advantage is the ability to use the washer indoors. The washing process is performed in a closed circuit, using a cleaning fluid heated up to 70°C. The solution is delivered through a spray gun nozzle at a pressure of up to 8 bar, thoroughly cleaning even hard-to-reach areas and heavily soiled parts from carbon deposits, grease, or oil. Both temperature and cleaning fluid significantly increase washing effectiveness. The unit features adjustable feet for leveling. The washer is highly effective for turbocharger reconditioning and for cleaning heavily soiled parts made of steel, cast iron, aluminum or other alloys. The washer lid is equipped with pneumatic cylinders, enhancing safety and ease of use. The washer features a dual-function spray gun: it can deliver only air or air mixed with cleaning fluid. Cleaned parts can be dried using compressed air. The washer is equipped with an intuitive control panel. - Adjustable water temperature - Smooth air pressure regulation - Manometer - Separate switch for detergent/water heating - Separate power switch Technical specifications: - Capacity: 160 L - Detergent heating: up to 70°C - Fluid tank capacity: 8–14 L - Working pressure: 5–8 bar - Weight: 47 kg - Dimensions: 770 × 600 × 1330 mm - Adjustable air supply - Pneumatic spray gun - Illuminated cabin - Ventilation Please note: the parts washer is supplied for self-assembly. Price does not apply to machines purchased in Poland. Itjdpfxouc Tn Aj Abxjh

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, A workshop parts washer is a versatile tool that should be present in every service shop, garage, or workshop. This indispensable equipment ensures fast and cost-effective removal of dirt and grime. A major advantage is the ability to use the washer indoors. A cabin parts washer guarantees effective removal of all contaminants—from oils to hard-to-reach deposits—while ensuring the safety and long-term performance of your components. The applied technology not only ensures cleanliness but also provides protection against corrosion. Please note that cleaning results will depend on the type of detergents used. Itodpsrh Ey Rofx Abxeh The parts washer is designed to use up to 90 litres of cleaning agent, with a maximum tank capacity of 140 litres. For maximum efficiency, the pump inlet should be covered during operation. The pump operates within a flow rate range of 2.7 to 3.6 litres per minute, providing thorough cleaning of surfaces, including fine cracks, with a powerful jet. The cleaning fluid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer is equipped with four legs for stable operation and an optimised working height. The lid locks automatically when opened. Additionally, the unit features a work surface below the basin level, useful for placing cleaning accessories or washed parts to let them dry. The unit requires self-assembly. Technical specifications: Tank capacity: 140 L Max. cleaning fluid volume: 90 L Max. pump capacity: 2.7–3.6 L/min Power supply: 230 V Dimensions: 1130x540x885 mm Tray dimensions: 800x500 mm Weight: 43 kg Power supply: 230 V Self-assembly required. Price shown is NET, exclusive of transport costs. For more information, please contact us by phone or email. Feel free to visit our website to explore our full offer.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, WORKSHOP PRESSURE WASHER MP150 Features: Washing is performed in a closed circuit using a cleaning liquid. The detergent is dispensed from the gun nozzle at pressures up to 8 bar, which enables thorough cleaning of hard-to-reach areas and heavily soiled parts contaminated with carbon deposits, grease, or oils. The washer is ideally suited for turbocharger refurbishment and for cleaning heavily soiled components made of steel, cast iron, aluminium, and other alloys. The washer lid is equipped with pneumatic actuators, enhancing safety and work quality. The cabin is standardly equipped with work area lighting. The washer features a dual-function gun capable of dispensing either air only or air mixed with the cleaning agent. The cleaned item can be dried with compressed air. * Please note: the washer is supplied for self-assembly. Technical data Itedpjvugwmefx Abxoh Capacity: 160L Detergent tank capacity: 8-14 L Operating pressure: 5-8 bar Weight: 29 kg Air regulation Pneumatic spray gun Illuminated cabin Work ventilation Dimensions: 770x610x700mm

Leto izdelave: 2021, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 021032-01610, MTA Air Purifier Manufacturer: AL-KO Model: Airsafe 1600 Professional air purifier for large rooms (meeting rooms, classrooms, etc.) ranging from 48 to 182 m², continuously adjustable air volume, equipped with pre-filter and main filter (HEPA 13 particulate filter), control unit, and filter change indicator. Includes 1 replacement filter. Effectively retains COVID-19 viruses! Infinitely Variable Adjustment LOW MID HIGH Air Filtration Capacity (m³/h) 800 1300 1600 Recommended Room Size* (m²) 48 – 96 79 – 158 91 – 182 Sound Pressure Level (dB(A)) 35 45 50 Power Consumption (Watt) 31 116 191 Electric Connection: 230V/50Hz AC Itjdpoim Rurefx Abxsh * Recommendation: 3- to 6-fold hourly air filtration rate at a room height of 2.75 m measured in a 9 x 10 x 2.75 m room, medium room absorption, corner installation Dimensions (W / D / H): 661 x 573 x 1900 mm Weight: 128 kg Serial No.: 021032-01610 Year of Manufacture: 2021 Condition: Visual 1-2, Technically OK Used, little operated Used machines may exhibit visual imperfections due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Stanje: dober (rabljeno), Leto proizvodnje 2008, 3160 delovnih ur, servis opravljen na novo, zelo dobro vzdrževan, NOVA HD črpalka pri FALCH-u. Iedpswy Elljfx Abxsth

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: Vector Ultra, Rabljen ATMI Ecosys Vector Ultra Gas Scrubber – Čistilec plinov za polprevodnike – Sistem za odstranjevanje plinov Proizvajalec: ATMI Ecosys Model: Vector Ultra Napajanje: 208 V, 60 Hz, 3 faze, 6,2 A Itjdjxhdg Uspfx Abxjh Brez knjig / dokumentacije

Stanje: rabljeno, Ta ponudba velja za Ultrawave ultrazvočni čistilec. Itjdjxwc Ngjpfx Abxeh Enota je v popolnem delovnem stanju in je pripravljena na takojšnjo dostavo.

Stanje: rabljeno, Ta oglas je za kompakten, namizni ultrazvočni čistilnik BRANSON 200. OBVESTILO PRODAJALCA: Če imate konkurenčno ponudbo za izdelek, jo bomo skušali vedno preseči. Izdelki se prodajajo po sistemu 'videno-kupljeno'. ID: FFTF011 Ime oglasa: BRANSON Ultrazvočni čistilnik 200 Ultrazvočni čistilnik Iodpfoxzicnox Abxoth

Stanje: rabljeno, Falch trifazni visokotlačni čistilec, tlak 500 bar pri 15 l/min, uporabljen le približno 360 ur in deluje brezhibno. Prodaja se s sprožilcem, brez cevi. Uporabljan za čiščenje ladijskih trupov, kamna, gosenic bagerjev in kjerkoli je potrebna zelo visoka moč pranja. Itedpfexc Numsx Abxjh

Stanje: generalkompletno obnovljen (rabljeno), 100% PREGLEDANO LETA 2025 CENTER ZA OBDELAVO ZA ODSTRANJEVANJE ROBOV TER ČIŠČENJE KRATKIH CEVI RSA RASAPLAN NV & RASACLEAN SK Obseg dobave: 1. Avtomatski RSA sistem za nalaganje kratkih kosov Iedpfxoymarfo Abxjth 2. Sistem za odstranjevanje robov RASAPLAN N00; 3. Sistem za čiščenje RSA RASACLEAN SK za kratke kose Popolna RSA linija za kratke cevi majhnih premerov z nalaganjem, odstranjevanjem robov in pranjem. Debelina: 3 mm Dolžina kosov / fiksne dolžine: 40 - 120 mm Sistem za odstranjevanje robov: RASAPLAN NK V 500

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, NEW UNUSED SAND WASHER. CAPACITY: 100T/H Itsdpfxowr El Aj Abxeh Price as of July 30

Stanje: rabljeno, Leto izdelave: 1974, Technical details: Pressure: 30 t Ram area: 450 x 250 mm Ram adjustment: max. 50 mm (manual) Strokes per minute: 20 – 120 Stroke: approx. 20 mm Stroke adjustment: no stroke adjustment Installation height / working area: 220 – 280 mm Table area usable: 600 x 600 mm Total power requirement: 7.5 kW Machine weight approx.: 5.0 t Dimensions (L x W x H) – Machine: 1.8 x 1.2 x 2.7 m Dimensions (L x W x H) – Control cabinet: 0.92 x 0.46 x 1.4 m Four-column mechanical punching press with feeder unit with operator console Clearances: frame opening front = 350 mm, side = 258 mm Itsdpou Icx Refx Abxeh

Stanje: rabljeno, Leto izdelave: 1978, Tlak 150 t Fiksni hod 80 mm Število hodov 30 - 150 /min Razmik med stebri 930 mm Vgradna višina (hod + zgornja nastavitev drsnika) 400 mm Stranski prehod med stebri 650 mm Površina mize 880x1300 / 1500x600 mm Prehodna odprtina v mizi 760 x 180 mm Višina mize nad tlemi 1270 mm Površina drsnika 920x1000 / 1300x600 mm Teža 27,5 t Potrebni prostor pribl. 3,1 x 1,8 x 4,3 m Ijdpfxovut Ure Abxoth S brezstopenjskim pogonom, pnevmatsko kombinacijo sklopke/zavore, fiksni hod, motorizirano nastavitev drsnika, pnevmatsko izravnavo teže drsnika, centralno mazanje, BREZ podajalnika Kot stoji in leži, BREZ zagona

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 2.000 mm, širina mize: 1.200 mm, stiskalna sila: 200 t, hod: 100 mm, Avtomatski stiskalni stroj za izsekovanje serije RST z Desch kompakt pogonom. Tridelna konstrukcija z nateznimi sidri iz litega železa. Stebrno vodenje s prednapetimi kletkami z valji za najvišjo natančnost. Fiksni hod 100 mm, možna predelava na manjši hod. Hidravlični sistem zaščite pred preobremenitvijo in elektronski nadzor pritisne sile. Mehansko obnovljen leta 2021. Krmiljenje Siemens S7. Na željo z ravnalnim strojem in tračno napravo. Iedpfx Asxcbcvjbxoth

Stanje: dober (rabljeno), Leto izdelave: 2012, Baujahr ist 1979, die Maschine wurde aber 2012 komplett generalüberholt auf neuste UVV Einbauhöhe: 800 mm Stößelhub: 500 mm Isdpfoy H Iddex Abxeth Ausladung: 360 mm Nennkraft: 400 kN Hydraulikdruck: 160 bar Betriebsstunden: 1356 Sonstiges: neue Steuerung von Pilz, Elektroschaltpläne vorhanden Video über Funktionalität vorhanden Auf Wunsch kann Transport und Verladen gegen Aufpreis Europaweit organisiert werden. Preise zzgl Mehrwertsteuer Besichtigung nach Terminvereinbarung möglich. Kontaktieren Sie uns, unser Team freut sich Ihnen weiterhelfen zu dürfen. Maschinen An- / Verkauf KAUF / VERKAUF VON PRODUKTIONS- & METALLBEARBEITUNGSMASCHINEN WERKZEUGMASCHINEN UVM. Sie benötigen eine hochwertige, aber preiswerte Maschine für Ihre Fertigung? Oder wollen Sie Ihre verkaufen? Für weitere Infos- oder Kontaktmöglichkeiten erreichen Sie uns über das Kontaktformular.

Stanje: rabljeno, Druck: 30 t Hübe pro Minute: 120-600 Hub: 40 mm Obere Tischgröße: 250 x 500 mm Untere Tischgröße: 600 x 600 mm Abstand zwischen den Ständern: 400 x 320 mm Itjdpe Dvk Aofx Abxeh Technische Merkmale: * Automatischer Vorschub, Länge 80 mm, Breite 320 mm * Luftkupplung Leistung: 7,5 kW ABMESSUNGEN: Höhe: 2.600 mm Breite: 1.800 mm Länge: 1.200 mm Gewicht: 3.800 kg Neue elektrische Anlagen

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1002650004, skupna višina: 3.170 mm, nastavitev hidravličnega cilindra: 60 mm, vgradna višina: 270 mm, višina mize: 1.300 mm, skupna širina: 2.875 mm, skupna dolžina: 2.875 mm, prebojna odprtina v mizi: 150 mm, dolžina mize: 1.250 mm, širina mize: 550 mm, stiskalna sila: 50 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 1.800 mm, širina krmilne omare: 600 mm, nastavitev hoda: 60 mm, razmak između stupova: 1.290 mm, delovna širina: 1.250 mm, razdalja med stranskimi nosilci: 260 mm, razdalja med stojali: 1.690 mm, skupna masa: 9.900 kg, prebijalna sila: 50 t, RASTER izsekovalni stroj RST 500-1250 DH z zvočno izolacijsko kabino in nadzorom orodij Stroj je v dobrem stanju Število gibov: 50 - 800 1/min Uporaba stroja v enojni izmeni Itodsyyvgtopfx Abxoh Možen ogled stroja pod napetostjo Cena na povpraševanje

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1002570003, skupna višina: 3.450 mm, nastavitev hidravličnega cilindra: 80 mm, vgradna višina: 270 mm, višina mize: 1.280 mm, skupna širina: 1.700 mm, skupna dolžina: 3.065 mm, prebojna odprtina v mizi: 210 mm, dolžina mize: 1.500 mm, širina mize: 750 mm, stiskalna sila: 63 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 1.800 mm, širina krmilne omare: 600 mm, nastavitev hoda: 80 mm, razmak između stupova: 1.540 mm, delovna širina: 1.500 mm, razdalja med stranskimi nosilci: 360 mm, razdalja med stojali: 2.020 mm, skupna masa: 17.000 kg, prebijalna sila: 63 t, RASTER prebijalni stroj RST 630-1500 DH z zvočno izolacijsko kabino in nadzorom orodja. Stroj je v dobrem stanju. Število hodov: 30 – 700 1/min. Uporaba v enosmenskem obratovanju. Možen ogled stroja pod napetostjo. Cena na zahtevo. Itedpfxsyyppbj Abxeh

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 105981, Press force: 45 t Adjustable ram stroke: 20 - 80 mm Ram adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Distance between uprights (L-R): 710 mm Table clamping area approx.: 700 x 450 mm Ram clamping area approx.: 700 x 360 mm Pass-through opening in table: 600 x 100 mm Strokes per minute: 80 - 400 min-1 Power requirement: 10 kW Height above floor approx.: 2900 mm Machine weight approx.: 7.2 t Control: Siemens S7 Iedpfx Absuqc Ngexsth Standard equipment With gripper feed. The machine was completely overhauled in 2001 with Siemens S7 control.

Stanje: rabljeno, Leto izdelave: 1981, številka stroja/vozila: 104680, Pressing force: 45 t Itodpjuqcwdefx Abxsh Adjustable ram stroke: 10 - 40 mm Ram adjustment: 50 mm Installation height (stroke bottom, adjustment top): 220 - 300 mm Distance between uprights (L-R): 560 mm Table clamping surface approx.: 550 x 450 mm Ram clamping surface approx.: 550 x 360 mm Through-hole in table: 450 x 100 mm Strokes per minute: 100 - 500 min-1 Power requirement: 7.5 kW Machine weight approx.: 6.2 t

Stanje: rabljeno, Single-column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, ram at TDC, largest stroke: max. 469 mm Installation height, ram at BDC, largest stroke: max. 387 mm Strokes: 50–200 strokes/min Main drive motor power: 18.5 kW Power supply: 400 Volts, 50 Hz - Hydraulically operated multi-disc wet clutch and spring-actuated safety brake - Infinitely variable drive via PIV gearbox with crawl speed for automatic stroke adjustment and setup operations Isdpfxsx U Eiae Abxoth - Hydraulic overload protection in ram - Press force and process monitoring via UNIDOR APS - Pneumatic, infinitely adjustable ram counterbalance - Roller feed MABU WE16, 160 x 3 mm, feed length programmable - Centralized grease lubrication - Operating manual and press documentation Includes: Roller Feed Device MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feed control MABU Space requirements eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Stanje: rabljeno, Leto izdelave: 1997, Pressing force: 315 t Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Bolster area approx.: 1600 x 1100 mm Ram clamping surface approx.: 1600 x 1100 mm Pass-through opening in bolster: 600 x 180 mm Strokes per minute: 15 - 180 min⁻¹ Bolster height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions LxWxH: 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment The press was retrofitted to CE standards in 2015. In 2021, the press control was upgraded to a SIEMENS S7-TIA system. The coil line still uses a SIEMENS S5 controller. Additional equipment Stroke bars in the press table Automation KEMMERICH coil line comprising: Decoiler: load capacity: 5 t Straightener: Ijdpjuqd Tmofx Abxeth Roll diameter: 70 mm Material thickness: 1 – 4.5 mm Strip width: 300 mm Feeder: Roll diameter: 160 mm Feed length: 0.1 – 9,999.9 mm Strip width: 30 – 350 mm Material thickness: 0.2 – 10 mm Material cross-section: 1,500 mm² Feed accuracy: +/- 0.05 mm Loading saddle