Pro Center 2000 nakup rabljenega (27.757)

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: omejena funkcionalnost, Opis: Zaradi nedavne spremembe v naši proizvodni strategiji smo iz obratovanja izločili našo CNC stroj Salvagnini P4-2512 za avtomatsko nalaganje, rezanje in upogibanje pločevine. Stroj je shranjen v skladišču in se zdaj prodaja v stanju "kakršnem je". Ker je bil stroj dalj časa neaktiven, bo pred ponovnim zagonom potreboval obsežno redno in tehnično vzdrževanje ter potrebne revizije. Prosimo, upoštevajte, da so vsi postopki in stroški montaže, zagona, vzdrževanja ter logistike/transporta izključno odgovornost kupca. Ppedpfozgt Huox Afaju V skladu z njegovim trenutnim stanjem mirovanja in potrebami po vzdrževanju je stroj cenovno zelo ugoden in konkurenčen. Gre za odlično priložnost za podjetja, ki želijo po izjemno privlačni investicijski ceni razširiti svojo proizvodno linijo z zmogljivim strojem Salvagnini. Tehnične specifikacije stroja: Znamka / Model: Salvagnini P4-2512 Leto izdelave: 2003 Stanje: Rabljeno (dalj časa neaktiven, potrebuje tehnično vzdrževanje in revizijo – prodaja se "kakršno je") Ključne značilnosti: Avtomatsko nalaganje pločevine, rezanje in natančno upogibanje panelov.

Stanje: dober (rabljeno), Manufacturer: MAZAK Model: Integrex 200-4 S Control: MAZATROL MATRIX Year of manufacture: 2010 Specifications Metric US Standard Max. turning diameter: 660 mm X-axis travel: 580 mm Y-axis travel: 160 mm Z-axis travel: 1,045 mm B-axis: 225° Spindle bore: 82 mm Spindle speed: 5,000 rpm Spindle power: 18.5 kW Sub-spindle speed: 6,000 rpm Sub-spindle bore: 82 mm Sub-spindle power: 18.5 kW Podpewpufgefx Afajpu Tool changer: 80 positions Driven tool speed: 12,000 rpm Dimensions (approximate) Length: 4,500 mm Width: 2,400 mm Height: 2,900 mm Weight: 9,200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Pedpfx Afovd Dftoaepu Control: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically assisted support rolls Intelligent software: - Ellipse program - U-bend shapes - Tangent control - Automatic section detector Specifications Metric / US Standard Horizontal and vertical operation Horizontal axis diameter: Ø 105 mm Number of rolls: 3 X-axis stroke: 0 - 400 mm Dimensions (approximate): Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms are made. We recommend verifying all important details.

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), številka stroja/vozila: 6080008264, Zelo dobro stanje (idealno). Podpszdp Rwofx Afaopu

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 4550 S PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS ), • Ability to perform operations such as grooving, drilling, marking, and cutting at different angles on aluminum and PVC profiles • 10 specially air-cooled spindle motors designed for high-speed aluminum processing • Axis speeds averaging over 120 m/min • Precision 3-axis profile clamping station • Profile feeding capacity: 7 pieces • Maximum profile processing length: 6500 millimeters / Minimum: 600 millimeters Psdezd Rndopfx Afaspu • Automatic profile length detection feature • Windows-based, easy-to-adjust, user-friendly interface • Data transfer via USB, online remote monitoring system • Remote connection support • 23.8" high-performance touchscreen display • Servo-controlled cutting unit enabling precision cutting between 30 - 150 degrees with ±0.1 degree accuracy • Automatic conveyor system for transferring cut scrap profiles to the collection trolley STANDARD EQUIPMENT • Ø550 millimeter saw blade • Automatic scrap chip conveyor discharge unit • Barcode printer OPTIONAL EQUIPMENT • Compatibility with CAM software • Optional custom length • Belt conveyor output system • Safety barrier (sensor)

Stanje: rabljeno, Used Drais dissolver (Germany), model RN 3-45 AS VAC. Product-contact components are made of magnetic stainless steel (ferritic steel). The machine is designed for vacuum operation. The mixer features a single shaft with a working length of 105 cm, equipped with a toothed disc with a diameter of 690 mm. The shaft is driven by an electric motor with a power of 45 kW, 1460 rpm, 400/690 V, 50 Hz. Operating shaft speed up to approximately 600 rpm. The mixer is equipped with a side wall scraper driven by a gearbox and an electric motor with a power of 1.5 kW, 1410 rpm, 440 V, 50 Hz. Scraper operating speed up to 26 rpm. The machine comes with a top cover and a vessel with a total capacity of 2000 l. Internal vessel dimensions: diameter 1465 mm x straight side wall height 1160 mm. The vessel has two bottom discharge outlets, each located at the sidewall, equipped with valves, and is mounted on two lower rails for forklift handling. The dissolver is hydraulically lifted/lowered. Lifting range approx. 145 cm. Hydraulic drive powered by an electric motor with a power of 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Included is a Tepro (Poland) vacuum pump and a control panel. The machine was last used in the chemical industry. Ppsdoykn U Njpfx Afaou

Stanje: dober (rabljeno), Leto izdelave: 2013, Profile machining center Axis travel ranges X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm Ppjdovy E Ibjpfx Afaju A-axis: +/-90° Working areas X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool changer with 8 positions in a protected housing, suitable for drilling, milling, and tapping tools, angle head and disc cutter, max. Ø 200 mm, plus 2 additional positions for 2 angle heads Tool holder: ISO 30 In pendulum operation (2-zone machining), the working stroke per zone is limited to 3500 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, številka stroja/vozila: 19500624, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 7 letvica, največja hitrost vrtenja: 18.000 obr/min, delovna višina: 1.000 mm, Original purchase price of the machine was €950,000! TECHNICAL DETAILS Milling Units / Motor Specifications Speed: 2,800 rpm Small milling unit motor power: 0.27 kW Small milling unit frequency: 300 Hz Small milling unit speed: 18,000 rpm Large milling unit motor power: 1.1 kW Large milling unit frequency: 200 Hz Large milling unit speed: 12,000 rpm Tool Data / Milling Cutter Data Clamping arm diameter (small milling unit): max. 8 mm Cutter diameter (small milling unit): max. 8 mm Clamping arm diameter (large milling unit): max. 10 mm Cutter diameter (large milling unit): max. 14 mm Electrical Data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic Data Operating pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 Nl/min Pneumatic line pressure limit at 70°C: approx. 15 bar Working Height Working height: 1,000 mm EQUIPMENT Ppedpfx Ajy Syuxsfaou Clamping Units Vertical clamping Maintenance unit with filter regulator Control cabinet / saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile storage Tools: Two screwdrivers, three cutting discs

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 14 kW (19,03 KM), vhodni tok: 80 A, dolžina obdelovanca (maks.): 4.000 mm, številka stroja/vozila: 6080008129, TEHNIČNE PODROBNOSTI Maks. širina profila: 130 mm Maks. višina profila: 205 mm Maks. dolžina obdelovanca/profila: 4.000 mm Kapaciteta obdelave: 80 enot PODROBNOSTI O STROJU Priključek: 3 N/PE 400 V Frekvenca: 50 Hz Tok: 80 A Moč: 14 kW OPREMA Pogonjen, brezstopenjsko nastavljiv prijemalec Dvižna funkcija za nemoteno podajanje Vodenje profila na valjih Pedjy Synljpfx Afaopu Notranje prijemalo za preprečevanje poškodb profilov Integrirani merilni senzorji za nadzor dolžine obdelovanca Prevzem obdelovancev preko izhodne mize Portalna konstrukcija za velike preseke profilov Industrijski PC z Windows operacijskim sistemom Čitalec črtne kode

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), I am selling the Weinig Unitec 10 mortising and tenoning machine for window production. Year of manufacture: 1998. Equipped with OERTLI cutter heads. Immediately available. Unit price: €8,500. Three units available. Condition: very good! Ppodpfxefzzhko Afaju

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Mabi 4QS + Stanze 4H stroj za vtiskovanje štirirobnih utorov in pripenjanje Mabi 3000E segmentne škarje Mabi stroj za krivljenje plaščev Mabi stroj za prebijanje lukenj Podeyz Ad Uspfx Afajpu Mabi 40 stroj za rezanje pokrovov + Mabi 4K stiskalnica za pokrove

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, XXL-Center RAS 75.06 - Splošni tehnični podatki v mm: Dolžina upogibanja: 6400 mm Maks. debelina pločevine (400N/mm2): 1,5 mm Maks. debelina pločevine (750N/mm2): 1,0 mm Maks. debelina pločevine (200N/mm2): 2,0 mm Območje pomika prijemal: 10 – 750 mm Prosti prostor pred čeljustmi do: 300 ° Izvlečne vstavne mize: da Ppedox Hf Tvepfx Afaeu Prijemala: da Programiranje: avtomatsko preko Bendex Dimenzije stroja vključno z varnostno ograjo pribl.: 9400 x 3000 Teža: 12,5 ton - Podatki glede stroja: Pogonski motor; 400V, 50/60 Hz, 3-fazni Leto izdelave: 2010 Stanje: Popolnoma obnovljen - Slike so primeri -

Stanje: rabljeno, Leto izdelave: 2000, Pile lifter Pedpfx Afjulhizjaopu Schneider Senator Profiline PLE O - H Year of manufacture: 2000 Description - With steel table

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AA100264-11 / AA100264-12, Línea BAZ y extrusión para la fabricación de largueros de automóviles compuesta por: *Máquinas de mecanizado: - Máquina Anger SP2-X2000 (n.º de máquina AA100264-11) - Máquina Anger SP2-X2000 (n.º de máquina AA100264-12) - 2x Unidades de tratamiento de refrigerante *Módulo de ensamblaje (celda robótica para largueros): - Robot 1 KUKA KR120 R3200 PA - Pinza para Robot 1 - Estación de marcaje - Robot 2 KUKA KR120 R3500 - Pinza para Robot 2 - Interfaz robot/centro de mecanizado - Unidad de limpieza de piezas - Máquina de montaje a doble pista - Robots 3 y 4 para manipulación - Sistema de cajones con insertos para piezas - Estación de atornillado Psdpfx Ajyzh Uljfaspu - Estación de aplicación de adhesivo - Plataforma - Robot 5 - Pinza para Robot 5 - Espacio para palets - Envolvente de seguridad - Control e integración eléctrica Más información a petición.

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 Psdpfod Nvi Djx Afaepu WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 4-osni center za obdelavo profilov Ppodpfx Aowwtylofaou Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dodatne tehnične specifikacije so na voljo na zahtevo.

Leto izdelave: 2004, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroja ne uporabljamo več, zato je naprodaj. Je popolnoma delujoč. Stroj je v naši lasti od leta 2007, redno vzdrževan in si ga lahko ogledate v naši proizvodni hali na Hrvaškem. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 4-osni CNC stroj za obdelavo profilov Zasnovan za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje vpenjal Največja delovna dolžina: 7.200 mm 8 pnevmatskih vpenjal Orodna revija s kapaciteto za 8 orodij Pedpfewwtxnox Afaepu Dodatne tehnične specifikacije so na voljo na zahtevo.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), CNC profilno obdelovalno središče Elumatec, tip: SBZ122/33, letnik 2012 Tehnični podatki: Ppjdpfx Asy Rfx Hofaou Delovno območje X – 3850 mm, Y – 350 mm, Z – 280 mm Elektro vretena 6 kW - maks. 24000 vrt./min Vpenjalo orodja HSK-63 F Vreteno v zelo dobrem stanju Obratovalne ure vretena 1634 h Menjalec orodja: 1 mesto za kotno glavo, 5 x orodje Delovna miza s 4 sponkami z avtomatskim pozicioniranjem Pnevmatsko vpenjanje Svetlobna pregrada Mobilna upravljalna enota Prosto stoječa upravljalna konzola Čitalec črtne kode USB priključek Operacijska programska oprema: Windows 7 Embedded Proizvodna programska oprema: EluSoft, EluCAM Numerično krmiljenje Ferrocontrol – Gateway Zaščitna ograja levo in desno z vrati Samodejno in centralizirano mazanje linearnih vodil Teža pribl. 1900 kg Skupna priključna moč pribl. 14 kW Dimenzije stroja 4.670 x 2.000 x 2.540 mm Potreben prostor 5.665 x 3.000 x 2.540 mm (Spremembe in napake v tehničnih podatkih ter vmesna prodaja so pridržane)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight: 1600 kg Total power requirement: 14 kW CNC machining center COMPACT - Travel range X-axis: 900 mm - Travel range Y-axis: 1300 mm - Travel range Z-axis: 180 mm - Max. workpiece dimensions: 2500 x 900 x 60 mm - Min. workpiece dimensions: 280 x 75 x 10 mm - Drive system (X & Y axis): rack and pinion - Drive system (Z axis): ball screw - Axis drive motors: AC servo motors Delta / YASKAWA - Air cushion table for easy movement and protection of workpiece surfaces - Milling spindle, air-cooled, 5.5 kW - Spindle speed, stepless: 24,000 rpm Ppjdpevz Ephsfx Afaeu - Drilling unit with 9 vertical spindles + 6 horizontal spindles + grooving saw unit - X-axis travel speed: 25 m/min - Y-axis travel speed: 45 m/min - Z-axis travel speed: 25 m/min - Controller: OSAY / Italy - Interfaces: Ethernet / USB / CompactFlash Card - Workpiece positioning: pneumatically retractable stops in X and Y - Tool length sensor - Non-vacuum workpiece clamping with pneumatically controlled grippers - CAD/CAM software: EXICAM (English) - Electrical connection: 3 phase, 400 V, 50 Hz - Weight: 1600 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 4200 x 3100 x 2200 mm Weight 3650 kg Total power requirement 24 kW CNC Machining Centre ROUTERMAX ATC 2132 PREMIUM - Working area X-axis: 2100 mm - Working area Y-axis: 3200 mm - Working area Z-axis: 200 mm - Traverse speed X-axis: 70 m/min - Traverse speed Y-axis: 70 m/min - Traverse speed Z-axis: 20 m/min - Milling spindle, air-cooled, HSD/Italy, 9.5 kW, HSK 63 F - Spindle speed, continuously adjustable: 24,000 rpm - Tool changer, 12-fold, linear - Drive system (X & Y axis): rack and pinion - Drive system (Z axis): ball screw - Traverse motors: AC servo motors YASKAWA - SHIMPO gear drive - Working precision 0.15 mm/m - Vacuum matrix table with 4 zones - BECKER dry-running vacuum pump, air-cooled, capacity 250 m³/h - Workpiece positioning: pneumatically retractable stops, 2 each in X and Y - Tool length sensor - CAD/CAM software: Alphacam Essential 2D - Controller ISAC / Italy - Interface: Ethernet/USB - Including safety light barrier with Y-axis mounting bracket - Electrical connection: 3-phase 400 V, 50 Hz - Total connected load: 25.0 kW - Operating ambient temperature: 0-45°C - Dimensions width: 3300 mm - Dimensions length: 4520 mm - Weight: 3650 kg Ppodpev A E Umsfx Afasu

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 6000 x 2900 x 2100 mm Weight: 4500 kg Total Power Requirement: 36 kW CNC Machining Center ROUTERMAX ATC 2150 ECO - Working area X-axis: 2100 mm - Working area Y-axis: 5000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 9.0 kW, ISO 30 - Spindle speed, stepless: 24,000 rpm - Tool changer: 12-position, side-mounted - Drive system (X & Y axis): rack and pinion - Drive system (Z axis): ball screw - Traverse motors: AC servo motors Leadshine 850 W - SHIMPO gear drive - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum matrix table with 10 sections and T-slots - 2 vacuum pumps, 11.0 kW each, air-cooled - Workpiece positioning: Pneumatically lowering stops, 4 each on X and Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (NESTING included) - Control system: DSP NK105 G3 - Interface: USB - Power supply: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Width: 2900 mm Pedpfxov A E Uyj Afaopu - Length: 6000 mm - Weight: 4500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 6800 x 2900 x 2100 mm Weight: 4500 kg Total power requirement: 36 kW CNC Machining Center ROUTERMAX ATC 2160 DELUXE - Working area X-axis: 2100 mm - Working area Y-axis: 6000 mm - Working area Z-axis: 300 mm - Routing spindle, air-cooled, HSD / Italy, 9.0 kW, ISO 30 - Spindle speed, infinitely variable: 24,000 rpm - Tool changer: 8-position traveling carousel - Drive system (X & Y axes): rack and pinion - Drive system (Z axis): ball screw - Travel motors: AC servo motors Delta / YASKAWA - SHIMPO gear drive - Max. traverse speed: 40 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum matrix table with 4 zones - BECKER dry-running, air-cooled vacuum pump, capacity 2x 250 m³/h = 500 m³/h - Workpiece positioning: pneumatically retractable stops, 2 each in X and Y - Tool length sensor - CAD/CAM software: Vectric CUT 2D PRO - Control: OSAI / Italy - Interface: Ethernet/USB/CompactFlash Card - Electrical connection: 3-phase, 400 V, 50 Hz - Operating temperature range: 0–45°C - Overall width: 2900 mm Ppjdpsv A E U Hofx Afaju - Overall length: 6800 mm - Weight: 4500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4000 x 2300 x 2100 mm Weight: 2300 kg Total Power Requirement: 17 kW CNC Machining Center ROUTERMAX 1530 PRO - Working area X-axis: 1500 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 6.0 kW, ER 32 - Spindle speed, stepless: 18,000 rpm - Drive system (X & Y axes): Rack and pinion drive - Drive system (Z axis): Ball screw - Travel motors: Leadshine hybrid servo motors - Max. traverse speed: 30 m/min - Max. working speed: 15 m/min - Working accuracy: ±0.2 mm - Repeat accuracy of positioning: ±0.02 mm Psdpev A Hbbjfx Afaepu - Vacuum grid table with 6 zones and T-slots - Vacuum pump: 7.5 kW, air-cooled - Workpiece positioning, pneumatically retractable stops: 2 each in X, 3 in Y - Tool length sensor - Automatic lubricant pump - CAD/CAM Software: VECTRIC CUT 2D PRO (nesting included) - Control: DSP NK105 G3 - Interface: USB - Electrical connection: 3-phase 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Dimensions width: 2300 mm - Dimensions length: 4000 mm - Weight: 2300 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 3300 x 2100 x 2100 mm Weight: 2000 kg Total power requirement: 16 kW CNC Machining Center ROUTERMAX B-Axis 1325 DELUXE - Working area X-axis: 1300 mm - Working area Y-axis: 2500 mm - Working area Z-axis: 400 mm - B-axis milling spindle swivels +/- 90° parallel to X-axis - Milling spindle, air-cooled, 5.5 kW - Spindle speed, infinitely variable: 18,000 rpm - Travel system (X & Y axes): rack and pinion drive - Travel system (Z axis): ball screw Ppedpfxov A Hbns Afaou - Travel motors: Delta / YASKAWA AC servo motors - SHIMPO gearbox drive - Max. traverse speed: 40 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum matrix table with 4 sections and T-slots - BECKER dry-running, air-cooled vacuum pump, capacity 129 m³/h - Tool length sensor - Alphacam Router Ultimate - ACRTR-U software - OSAI control system - Ethernet/USB/CompactFlash Card interface - Safety light barrier according to EN 848-3 regulations (optional, depending on installation conditions on site) - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Width: 2100 mm - Length: 3300 mm - Weight: 2000 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 3300 x 2100 x 2100 mm Weight: 2000 kg Total power requirement: 19 kW CNC Machining Center ROUTERMAX ATC 1325 DELUXE - Working area X-axis: 1300 mm - Working area Y-axis: 2500 mm - Working area Z-axis: 300 mm - Router spindle, air-cooled, HITECO / Italy, 9.5 kW, HSK 63F - Spindle speed, infinitely variable: 24,000 rpm - Tool changer, 8-position, side-mounted - Travel system (X & Y axis): rack and pinion drive - Travel system (Z axis): ball screw drive - Traverse motors: AC servo motors Delta / YASKAWA - SHIMPO gearbox drive - Max. traverse speed: 40 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 4 zones and T-slots - BECKER vacuum pump, dry-running, air-cooled, capacity: 129 m³/h - Pneumatic, retractable workpiece positioning stops (2 in X and Y) - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (NESTING included) - Control system: OSAI / Italy - Interface: Ethernet / USB / CompactFlash card - Electrical connection: 3-phase, 400 V, 50 Hz Psdpfx Afjv A E S Ssaspu - Operating ambient temperature: 0–45°C - Width: 2100 mm - Length: 3300 mm - Weight: 2000 kg