Pressta nakup rabljenega (52)

Leto izdelave: 1998, Stanje: rabljeno, Longitudinal saw for cutting aluminium profiles with feed pusher, in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Maximum feed length of material pusher: 6,200 mm Hedewx I Hvjpfx Ab Ssw The unit is dismantled and stored at our warehouse Further technical data available on request

Stanje: zelo dobro (rabljeno), Stroj za kotne spoje Pressta Esiele PV8 Hjdpjl Skl Defx Ab Sew Dostava po EU ~300 evrov

Stanje: rabljeno, Leto izdelave: 1977, Profile height 60 mm 60 Machine weight approx. 188 kg Space requirement approx. 0.85 x 0.45 x 1.25 m - Factory No.: 292539 - Pneumatic clamping device Hedpfx Abep Raits Ssw

Stanje: rabljeno, Commission trolley, tiered trolley, paint drying trolley, compartment transport trolley, transport trolley, window profile trolley, - Quantity: 1 commission trolley available - Overall length: 1750 mm - Overall depth: 1020 mm - Overall height: 1670 mm - Bottom support: 720 mm - Support height: 1400 mm - Weight: 62 kg Hsdpfxsb Hw Dbe Ab Sow

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9123, Leto izdelave: 2008, Heavy-duty, rigid milling machine for large posts with infinitely variable vertical adjustment of the milling cutter. Manual feed. Motor: 2.2 kW, 400V. Cutter speed: 2,800 rpm. Maximum cutter diameter: 300 mm. Profile clamping angle adjustable from 20° to 90° to 20° (according to the scale). Maximum cutting width: 400 mm (at 90° angle). Maximum cutting depth: 110 mm. Hjdpswhpk Ijfx Ab Sjw Maximum profile height: 190 mm. Stepless milling height adjustment (handwheel with scale), Adjustment range: 0 - 100 mm. Quick-change cutter system. Pneumatic workpiece clamping. Integrated cooling and lubrication system.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Type: AKF 300 Hedpfx Aorblb Rjb Sew Motor: 400V 2.2kW Speed: 2800 rpm Cutter diameter: 300 mm

Leto izdelave: 2009, Stanje: rabljeno, Aluminium saw system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Cross conveyor, discharge table, chip conveyor, and extraction system included Soundproof enclosure Controlled via Siemens S7 panel Operating manual and other documentation available; further technical data upon request The machine was operational until disassembly Hjdpoqzmnuefx Ab Ssw For further technical data, please inquire or refer to the photos

Stanje: zelo dobro (rabljeno), Stroj za vogalne spoje Pressta Esiele PV10 Dostava po EU ~300 evrov Hodsl Skl Iopfx Ab Sew

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1015, profiles with dimensions (HxW) up to 100x195 mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V motor, 2850 rpm cutting disc d=450x3.8x40 mm, z=110 horizontal and vertical material clamping on the infeed side dosing spray installation horizontal material clamping in the feed device both clamping jaws retract when reversing (prevents scratching of the profile) infinitely adjustable hydropneumatic feed of the cutting disc Hedpfxowgmv Se Ab Sew cutting disc emerges from the rear cut length adjustable from 0–300 mm (with reversing device 0–600 mm) cut length adjustment by handwheel with mechanical counter maximum cut profile width 200 mm cutting range (height x width) 100x195 mm, 80x200 mm automatic shut-off when material is depleted possibility to connect an extraction unit

Leto izdelave: 1988, Stanje: zelo dobro (rabljeno), Installation height: Standard 140 mm Maximum installation height: 280 mm Table size: 450 x 300 mm Dimensions (W x D x H): 60 x 850 x 1500 mm Hsdpsfitbwofx Ab Sjw Weight: 300 kg

Stanje: rabljeno, Leto izdelave: 1996, Hydropneumatic operating principle Max. punching height: 90 mm Hedpev S D Ikofx Ab Sew Back gauge stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Žaga Pressta Eisele Emmegi Hodpjg R Ifgjfx Ab Sow Rezilne plošče 550 mm Prevoz po EU ~300 evrov

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, premer žaginega lista: 550.500 mm, Machine in perfect technical condition. Very little used. Designed for processing aluminium and PVC profiles. Mitre cuts possible at 3 levels and can be used as a splitting saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre. Profile machining up to 300 mm, width up to 90°, mitre angles up to 30°. Notch depth horizontally up to 185 mm, vertically up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical saw blade swivel range: 30° – 90° – 30° (front/center/rear), manual, positioning with digital display. Hedpfxsvtarns Ab Sew Material stop (tabletop) can be manually rotated left and right within 30° - 90° - 30°, positioning via measurement scale. Material depth stop adjustable manually using a sliding carriage and manual clamp, positioned with a digital display.

Leto izdelave: 1992, Stanje: zelo dobro (rabljeno), Hydro-pneumatic drive Hjdpfx Aefcbb Heb Sew

Leto izdelave: 1999, Stanje: rabljeno, Saw blade diameter vertical and horizontal: 500 mm Hsdpfjvmz R Ssx Ab Ssw Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Material stop swivels with locking points and digital display Notch height motorized adjustment with digital display Motorized angle adjustment with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Leto izdelave: 1991, Stanje: zelo dobro (rabljeno), Punching machine, pneumatic punching machine, pneumatic press Hodjl H Hyqspfx Ab Ssw Presta Eisele HPS 120

Leto izdelave: 2005, Stanje: rabljeno, Maximum cutter diameter: 300 mm Manual feed for milling Continuously adjustable angle stop with locking points Hsdpfeu T N D Ujx Ab Sjw Max. notching depth: 110 mm Max. profile height: 190 mm Max. cutter stack height: 95 mm Pneumatic material clamps Spraying device

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Dimensions (W x H x D): 900 x 1180 x 750 mm Weight: 235 kg Operating Principle: Hydropneumatic Hedpslf Hd Ssfx Ab Sow Operating Pressure (pneumatic): 6 to 8 bar Air Consumption: 40 litres/stroke at 8 bar Pressing Force: 28 kN at 8 bar Air Connection: R 1/4" Punching Stroke: 18 mm Return Stroke: 100 mm Maximum Insertion Height: 120 mm Maximum Profile Height: 150 mm

Stanje: rabljeno, Hydropneumatic operating principle Hodpfeu T E Snox Ab Sow Max. punching height: 90 mm Back gauge stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Type: AKF 250 Motor: 400V 2.2kW Speed: 2800 rpm Hodsucq Nwjpfx Ab Sow Cutter diameter: 250mm Cutter shaft diameter: 40mm Milling width: 200mm Milling depth: 85mm Profile height: 150mm

Leto izdelave: 1993, Stanje: rabljeno, Milling cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop adjustable between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity lubrication system Manual feed Hjdorv A Hmjpfx Ab Ssw Weight: approx. 280 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Type: AKF 250L Motor: 400 V, 2.2 kW Speed: 2,800 rpm Cutter diameter: 250 mm Cutter spindle diameter: 40 mm Milling width: 300 mm Milling depth: 85 mm Profile height: 160 mm Weight: approx. 150 kg Hjdpfx Abott Eb So Sjw Dimensions (W x H x D): 950 x 1450 x 930 mm

Leto izdelave: 1996, Stanje: rabljeno, Notching width: max. 200 mm Hedpsq Awg Ejfx Ab Sow Notching depth: 40 mm Profile height: max. 100 mm Vice clamping width: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed via foot switch activation Profile clamping via steplessly swiveling vice.

Stanje: dober (rabljeno), Leto izdelave: 1996, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive ■ Operated via foot valve Hedpfx Abetk Ul Re Ssw ■ Maximum stroke length: 40 mm ■ 25 double strokes per minute ■ Maximum installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table height: 950 mm ■ Punching force: 90 kN at 10 bar

Stanje: dober (rabljeno), Leto izdelave: 1998, Punching machine, complete with base frame. Hydro-pneumatic drive. Operation via foot valve. Ram force at 10 bar = 90 kN. Hsdpfx Abetiy R Us Sew Maximum stroke length: 40 mm. 25 double strokes/min. at full stroke. Maximum installation height: 250 mm. Throat depth: 130 mm. Throat depth with rotary table: 90 mm. Working height: 950 mm.