Kopirna rezkalna stroj

Pressta Eisele Panto 100

Leto izdelave: 2001, stanje: rabljeno, Višina profila: največ 150 mm Širina profila: največ 300 mm Območje obdelave: 365 x 230 mm Pnevmatsko vpenjanje obdelovanca Nwedpfx Aezmhqzsndsk Naprava za nanašanje minimalne količine hladilno maziva 2 pnevmatska kopirna vijaka s kopirnim peresom 5/8/10 mm

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Nodpowwtw Defx Andewk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Njdpfxeu R Szas Andjwk Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Nwsdpfxovwbp Aj Andek

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. Nwedpfx Asiidm Njndsk The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 1995, Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Rotational speed: 2800 rpm Air pressure: 6 bar Machine weight: approx. 700 kg Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit Nwsdpetv Rgrjfx Andjk * Large cutting area, allowing simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing of the swivel mechanism * Safe clamping via dual-pressure system * Double guide for saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° * Including extraction unit (without piping), ALKO Mobil-Jet 100, year of manufacture 2002

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Maksimalni vrtljivi obseg (navpična os električnega vretena): 1650 – 2350 – 3000 mm Vektorska hitrost (X-Y) (PRO-SPEED): 85 m/min Programabilna hitrost v osi Z: 30 m/min Prehod elementa: 170 mm Multifunkcijska enota BRC-K: Tehnične značilnosti (Gr-Multif_BRC-K_2.1_N5.1-0.6) Nwedpfxoyffh Nj Andsk 1) Moč: Motor 3,6 kW (S6 - 40 %) Število polov: 2 Regulacija obratov: preko CNC s frekvenčnim pretvornikom Hladilni sistem z ventilatorjem 3) Horizontalno rezkalno vreteno: Vpenjanje orodja: ER25 Hitrost vretena: 6000–18000 vrt/min Smer vrtenja: Desno/levo Največje dimenzije orodja: L1 = 151 mm / B1 = 120 mm / T = 20 mm Največje dimenzije orodja 2: L2 = 111 mm / B2 = 80 mm / T = 20 mm Maksimalna globina obdelave: 115–75 mm

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 10.347 h, skupna višina: 2.400 mm, skupna dolžina: 7.000 mm, skupna širina: 2.400 mm, Barva: Siva Lastna teža: 3.450 kg - Letnik: 2018 - Dokumentacija na voljo: Da - CE oznaka: Da - CE certifikat: Da - Delovne ure: 10347 - Število vreten za frezanja [kos]: 1 - Vreteno za frezanja 1: Nwedpfx Ajxtbgpendjk - Število nadzorovanih osi [kos]: 5 - Min. hitrost vretena [rpm]: 600 - Maks. hitrost vretena [rpm]: 24000 - Moč glavnega motorja [kW]: 8,5 - C-os na voljo: Da - Vrsta mize za frezanja: konzolna miza - Sistem za vpenjanje orodja: HSK-F63 - Sistem za vpenjanje materiala: pnevmatični - Vrtalno orodje na voljo: Da - Moč motorja [kW]: 2,64 - Horizontalna vretena za vrtanje [kos]: 10 - Vertikalna vretena za vrtanje [kos]: 24 - Enota za žaganje na voljo: Da - Število položajev menjalnika orodja [kos]: 25 - Sistem/programska oprema: Xilog plus - Varnostna funkcija: odbijač - Vakuumska črpalka na voljo: Da - Število [kos]: 1 - Znamka: Becker - Tip: Picchio - Letnik: 2018 - Moč glavnega motorja [kW]: 2,5 - Kapaciteta [m³/h]: 108 - Premer priključka [mm]: 80 - Brez olja: Da - CNC možnosti: bralnik črtne kode, transportni trak za odpadke, laser za pozicioniranje vakuumske sesalne glave - Delovno območje X [mm]: 3110 - Delovno območje Y [mm]: 1320 - Delovno območje osi Z [mm]: 180 - Napetost [V]: 400 - Poraba električnega toka [A]: 47,2 - Varovalka [A]: 63 - Moč [kW]: 10,0 - Dimenzije za transport: 7000 mm x 2400 mm x 2400 mm (d x š x v) - Transportna teža [kg]: 3450 kg - Transportni paketi [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/davčna shema: Podjetjem se DDV obračunava Dostava in odkup so možni kadar koli za vse izdelke iz industrijskega sektorja Yorick Diebels

Stanje: rabljeno, Leto izdelave: 1994, Tehnični podatki: Premer žaginega lista: 450 mm Število vrtljajev: 2820 min⁻¹ Največja dolžina reza: 5000 mm Najmanjša dolžina reza: 240 mm Nwedou Nigkspfx Andjk Potreben zračni tlak: 6-8 bar Premer izvrtine žaginega lista: 32 mm Kot reza v obe smeri: 45+90° Priključek za stisnjen zrak: 6–8 bar Skupna priključna moč: pribl. 4,6 kW Teža stroja pribl.: 1,1 t Dimenzije stroja (D x Š x V): pribl. 6,05 x 1,49 x 1,79 m Dodatne značilnosti stroja: - Vpenjalna naprava: pnevmatska, vertikalna in horizontalna - Pnevmatska naprava za meglenje - Višinsko nastavljive noge stroja - Materialne podpore pomične skupaj z žago - Dvoročno upravljanje - Števec kosov Premer reza v skladu s tabelo reznim diagramom, saj je odvisen od hitrosti in žaginega lista. Hitrost rezanja pri 2820 obr./min in premeru lista Ø = 66 m/sec. Oprema: - 2 rezervna žagina lista

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 100.000 mm, dolžina podajanja os X: 5.050 mm, premer žaginega lista: 550 mm, vrsta vhodnega toka: trifazni, hitrost žaginega lista: 2.800 obr/min, vhodna napetost: 380 V, zračni tlak: 6 letvica, skupna masa: 1.800 kg, Twin Electra 550 je dvo-ugla žaga s tremi osmi in samodejno premičnim žagalnim agregatom na linearnih vodilih. Elektronsko upravljanje vseh kotov z brezkrtačnim motorjem od 45° (notranje) do 22°30’ (zunanje) z natančnostjo 240 položajev na stopinjo. Možnost povezave s programi za izdelavo oken (Orgadata / Unilink / Wictop ... itd.). Stroj ima naslednjo opremo: - Industrijski PC - Dodaten vpenjalec na rolerski progi - Samodejna podpora profila - Bližnjice - Rez nadstandardne dolžine Njdpfx Ajzav U Njndswk - Prečno žaganje - Avtomatsko rezanje - Možnost povezave z zunanjo programsko opremo (Orgadata, Unilink, Wiktop ... itd.)