Prah nakup rabljenega (692)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 5470 x 1100 x 2500 mm Weight: 1100 kg Total power requirement: 11 kW Dust extractor, conforms to H3 standard JET-350 - 4 chip bins with clamping brackets, 600 x 500 mm - Residual dust content: 0.1 mg/m³ - Including powder fire extinguisher - On / Off switch - Power input: 11.0 kW - Mains voltage: 400 V / 50 Hz - Current draw: 32 A - Filter area: 45.2 m² - 120 filter bags - Automatic, pneumatic JET filter regeneration system - Bin volume: 4 x 200 L, total 800 litres - Suction nozzle: 350 mm - Airflow rate: 8640 m³/h Cajdevz E Nhspfx Afqsa - Negative pressure: 3600 Pa - Dimensions: L = 5470 mm, W = 1100 mm, H = 2500 mm - Weight: 1100 kg

Stanje: novo, Description: Vacomat 140/160 XPe - The mobile dust extractor Vacomat 140/160 XPe is our smallest model and is ideal for single-machine extraction. Airflows of up to 1,593 m³/h can be conveyed using this negative pressure extraction system, e.g. for the extraction of panel saws, jointers, or thickness planers. - In the standard configuration, extraction is started manually at the touch of a button. Upon request, an automatic start of the fan can be installed so that extraction begins as soon as the connected processing machine is switched on. This prevents forgetting to activate extraction or unnecessary idling. - The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) fitted with a plastic liner. A vacuum channel securely holds the plastic bag inside the collection container. Viewing windows make it easy to monitor the fill level. - The mobile extractor Vacomat 140/160 XPe automatically monitors its extraction performance via a pressure sensor and ensures maximum operational safety. Filter Cleaning - On the Vacomat 140/160 XPe, an integrated control panel activates an electric/mechanical shaking motor to clean the filter sleeves. Control is managed via feedback from the woodworking machine using potential-free contacts. Once all connected machines are switched off, the filter shaking process starts automatically. For this regeneration mechanism, no compressed air connection and thus no compressor is required. As a result, noise levels are significantly reduced during cleaning. - For very high and especially fine dust levels, an efficient pulse-jet filter cleaning option (XPe-D) is recommended (NOTE: Overall height +100 mm, length +280 mm). Filter cleaning using the compressed air tank is performed offline, after the extraction process. SCHUKOCONE FILTER Cjdpfx Afevwflnsqoaa - The mobile dust extractor Vacomat 140/160 XPe is supplied as standard with patented SchukoCone® filter sleeves. - The SchukoCone® filter is an innovative combination of an outside-loaded filter sleeve with an inside-loaded cone. This filter design offers approximately 60% more filter area with a smaller footprint. - SchukoCone® filter sleeves fully demonstrate their potential especially for fine dusts, where large filter area and low filter load are crucial. - Lower filter load results in a longer filter service life. A lower filter resistance means less fan output and, consequently, reduced energy consumption. ASSEMBLY & DELIVERY SCOPE - Mobile dust extractors of type Vacomat 140/160 XPe are delivered pre-assembled and ready to plug in (3-phase, 16 A, with 6.0 m cable) on a disposable pallet (included). A chip collection bag (size V) is also included. - The Vacomat 140/160 XPe must be connected electronically to the machine to be extracted, so that automatic regeneration of the filter sleeves is triggered once the processing machine is shut down. A certified electrician can help with this. The supplied control panel with integrated phase inverter is prepared for a potential-free contact query and three current transformer coils (coils not included). - With a flexible hose or a fixed pipeline...

Stanje: dober (rabljeno), Leto izdelave: 2012, Radialni ventilator, ventilator za odsesavanje prahu, ventilator, odsesavanje, ventilator za prah, puhalnik -Motor: Ziehl-Abegg ECblue .1R -Hitrost vrtenja: 1580 min⁻¹ -Priključek: Vhod Ø 240 mm Caedpfx Asfiqrfofqoa -Priključek: Izhod Ø 450 mm -Dimenzije: 995/815/H1060 mm -Teža: 148 kg

Stanje: novo, Leto izdelave: 2021, New machine Year of manufacture: 2021 For wood dust and wood chips Designed for industrial/commercial use Motor: 2.2 kW IE3 Speed: 2874 rpm Caodpfxeqrw Ers Afqja Extraction port: 160 mm Filter surface area: 9.21 m² Filter cleaning: pneumatic Sound pressure level: 73 dB(A) Rated air flow: 1,448 m³/h Vacuum: 2,247 Pa Chip collection volume: 2 x 165 l Dimensions (LxWxH): 1,755 x 830 x 1,654 mm Weight: approx. 274 kg Availability: short-term Location: Hochheim

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, filtrirna površina: 29 m², volumenski pretok: 6 m³/h, negativen tlak: 3,15 Pa, premer sesalne cevi: 300 mm, nazivni pretok: 5,8 m³/h, skupna masa: 790 kg, skupna širina: 1.250 mm, skupna dolžina: 2.840 mm, skupna višina: 2.470 mm, vhodna napetost: 400 V, raven hrupa: 68 dB, nazivna moč: 7,5 kW (10,20 KM), sesalna zmogljivost: 5,8 m³/h, vhodna frekvenca: 50 Hz, maks. debelina aluminijaste pločevine: 2 mm, trajanje garancije: 12 meseci, Exhibition demo unit, deduster with rotary valve, 1,500 mm length (disassembled in photo), including control panel. Star-delta start-up, frequency converter available upon request, including automatic extinguishing system (powder extinguisher). - Immediately available - Caodpfewrnwusx Afqja

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), Max. working width: 1800 mm, heating capacity: 111 kW, control system: Siemens SIMATIC 5, length: 22,000 mm, height: 4,500 mm. Comes equipped with trolley, unwinding station, material accumulator, turning frame, platform, supporting frame, vibrating trough feeder, spreading roller, feed rollers, scattering machine, powder feeding device, IR emitters, pyrometer, calender unit, turret winder, cross-cutting device, additional components and accessories, including comprehensive documentation. Suitable for all web-shaped materials such as foams, nonwovens, textiles, paper, etc. Open coatings can also be applied, such as powder/adhesive coatings that can be reactivated later (e.g., preparation for thermoformed parts). The machine can also produce stiffening nonwovens used for reinforcing shirt and jacket collars. On-site inspection possible. The machine was completely overhauled about ten years ago and has seen little use since then. Caodpfx Afeq Ixgljqsa

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4590 x 1100 x 2500 mm Weight: 1,000 kg Cedpfx Ajvz E Iqjfqsaa Total power requirement: 7.5 kW Dust extractor, complies with H3 standard JET-300 - 3 chip containers with clamping bracket 600 x 500 mm - Residual dust content: 0.1 mg/m³ - On/off switch - Power consumption: 7.5 kW - Mains voltage: 400 V / 50 Hz - Current consumption: 32 A - Filter area: 35.32 m² - 90 filter bags - Automatic, pneumatic filter cleaning – JET system - Dust container volume: 3 x 200 liters - Inlet nozzle: 300 mm (right-hand side) - Nominal air flow: 6,000 m³/h - Minimum air flow: 5,100 m³/h - Negative pressure: 3,400 Pa - Transport dimensions: L = 4,590 mm, W = 1,100 mm, H = 2,500 mm - Weight: 1,000 kg

Stanje: novo, Exhibition machine Type A according to DIN EN 16770:2018 Without fire extinguishing system, tested in accordance with GS-HO-07 test principles of the BGHM. The dust extractor is a mobile extraction and filtration unit for industrial applications, designed for placement in the work area. The dust extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic chips and dust at various processing machines. Comprising a vacuum-resistant housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, a high-performance radial fan with three-phase motor (energy efficiency class IE3) located on the clean air side, as well as integrated exhaust silencing and air outlet grille. Equipped with 2 swivel and 2 fixed castors, 2 chip containers with collection bags, and a control system with 5 m connection cable and CEE appliance plug. The control system is designed for automatic operation. Automatic start control for up to 6 machines and automatic filter cleaning with runtime extension are included. For automatic startup, either monitoring coils or volt-free machine contacts can be used. Single-coat PVC paint finish in RAL 9006 (white aluminum). Delivery in fully assembled, ready-to-operate condition. Caedpfx Afovwfu Njqja For filter cleaning, adequately prepared compressed air must be provided on-site (connection via plug nipple NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm Residual dust content: < 0.1 mg/m³ H3 Filter area: 21 m² Cleaning: Offline - compressed air jet pulse Compressed air supply: 6 bar (connection via plug nipple NW 7) Airflow: 4,500 m³/h Rated airflow (at 20 m/s at the suction nozzle): 3,530 m³/h Negative pressure (at suction nozzle, rated airflow): 2,700 Pa Sound pressure level MAX (distance to unit 1m): 67 dB (A) Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 rpm, IP 54 Operating mode: continuous, intermittent Collection drum volume: 2 x 165 l Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm Weight: approx. 705 kg Accessories: 1 frequency converter 5.5 kW for the fan of the SMU dust extractor, manufacturer Eaton (Item no. 114004) with control integrated into the dust extractor’s control panel to maintain constant airflow during filter saturation, including safe fan shutdown during filter cleaning. Individual adjustment of suction pressure / airflow as required. The converter increases system efficiency, saves energy, and reduces wear on materials and machinery. Technical features: - Motor rating 5.5 kW, - Integrated PID controller, - Automatic energy optimization, - Integrated manual/automatic changeover, - Commissioning menu for rapid parameter setup, - Integrated radio interference filter according to EN 55011-1B, - Synchronization with freely rotating motor shaft, - Including pressure transducer 0-50 mbar (pressure cell). 1 slide valve control for 1 – 8 processing machines (Item no. 113197) Activation of up to 8 electro-pneumatic shut-off valves in the extraction ductwork at the respective processing machines, triggered by volt-free contacts or monitoring coils on the machines. 8 monitoring coils STWA1 (Item no. 600668) for contact monitoring at the processing machines, suitable for all STW types.

Stanje: novo, Leto izdelave: 1987, PowerCore ločevalnik prahu Donaldson Torit CPV Codpfx Afexc Eyxoqsaa Tip: CPV6 Neuporabljen Z novimi filternimi vložki Oglejte si tudi naše druge oglase VMA Wekerom

Stanje: zelo dobro (rabljeno), Einheit zur Staubabsaugung für den Betrieb mit Vorentstauber. Zustand: nahezu neuwertig. Cjdeumm Npepfx Afqeaa

Stanje: novo, Leto izdelave: 2025, Fully automatic capsule filling machine for powder or pellets into capsules of sizes 000 - 5. In addition to the main machine, various auxiliary modules and supplementary machines allow for a fully automated filling process. Included: material storage hopper, capsule storage hopper, vacuum conveyor, capsule feeder, industrial dust separator, capsule polisher, metal detector, and collection bin (end product). – Specifications: Suitable for capsule size: 000 – 5; segment hole: 25; max. machine cycle rate (idle): 140 cycles/minute (equivalent to an output of up to 3,500 capsules/minute); main machine dimensions: L1555 x W1165 x H2040mm; main machine weight: 2200kg. Cajdpfxjv Nlc Re Afqsa Please note that our new prices are often lower than typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short lead times starting at approx. 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Drying system / dryer suitable for various materials such as powders, granulates, etc. - Control system for temperature regulation Cajdpfxsqu R Naj Afqea This machine is connected and ready for testing in our machinery hall.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21.1605, 21.1702, 21.1600, 21.1682, vrsta vhodnega toka: trifazni, Kompletna linija za pranje, sušenje i uklanjanje vlakana i prašine s krutih plastičnih materijala, kapaciteta 1,5–2 t/h uključuje: - bazen za pranje sustavom potapanja (sink-float) - horizontalnu trenjem perilicu Casdewpm U Topfx Afqsa - mehanički čistač i sušaru - zig-zag separator i sustav za punjenje u big-bag vreće - električnu upravljačku ploču za cijeli sustav Dijelovi u dodiru s vodom izrađeni su od nehrđajućeg ili kaljenog čelika. Strojevi (bazen za pranje i horizontalna trenjem perilica) opremljeni su ljestvama i platformom za inspekciju, te omogućuju instalaciju s obje strane. Također, strojevi u liniji mogu se zakretati jedan prema drugome, pa linija može biti postavljena kao I, L ili U oblik. Linija je potpuno funkcionalna, vrlo malo korištena, kupljena za projekt koji nije realiziran.

Stanje: rabljeno, Dimensions (Length/Width/Height): 1400/2000 x 1400 x 3000 mm Connection diameter: 2x 220 / 1x 180 mm with 14 suction nozzles pneumatic slide valve control fan discharge negative pressure system in compact design with 12 built-in automatic slides used, in good condition Manufacturer: ALKO Type: FU-2-12-800-70-III-A No.: 910225 Length: 1400 / 2000 mm Width: 1400 mm Height: 3000 mm 12 x suction nozzles D 180 with slide valves 2 x suction nozzles D 220 without slide valves cladding shaking device with discharge via fan complete control system air recirculation return/exhaust air D approx. 500 mm with 2 fans 0.9 + 3.0 kW pole-changing motors each Caedpfx Ajvwfu Aefqoa 1450 / 2800 rpm Location: 97447 Gerolzhofen Handover in current condition, free loaded without guarantee or warranty

Stanje: dober (rabljeno), Leto izdelave: 1998, Radial fan, dust extraction blower, fan, extraction unit, dust blower, blower, exhaust fan - Manufacturer: Eurovent, dust extraction blower radial fan type MPR 502 - Motor: AEG 5.5 kW 2860 rpm - Airflow volume: 3000 m³/h - Pressure: 3900 Pa - Connection: Inlet Ø 305 mm - Connection: Outlet 220 x 160 mm - Base plate: 415 x 400 mm Cedpforp Ii Ujx Afqsaa - Dimensions: 755/750/H770 mm - Weight: 100 kg

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 36 reviews ✈️ 25-day delivery ✈️ ⚡️ Top service ⚡️ Fast delivery ⚡️ Outstanding support! ✅✅✅ Energy efficiency class A+++ ✅✅✅ ✳️ Maintain your liquidity! We offer a wide range of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ✳️ ✅ MC 9 ► Number of filters: 9 ► Filter dimensions: 1850 * diameter 160 mm ► Suction performance: 4,500 m³/h ► Electric motor power: 4 kW/hour ⭐ Offer price: €5,550 plus VAT & shipping* ⭐ ✅ MC 17 ► Number of filters: 17 ► Filter dimensions: 1850 * diameter 160 mm ► Suction performance: 6,500 m³/h ► Electric motor power: 5.5 kW/hour ⭐ Offer price: €6,550 plus VAT & shipping* ⭐ ✅ MC 26 ► Number of filters: 26 ► Filter dimensions: 2500 * diameter 160 mm ► Suction performance: 8,500 m³/h ► Electric motor power: 7.5 kW/hour ⭐ Offer price: €8,550 plus VAT & shipping* ⭐ ❗❗❗Apply dozens of colors in your spray booth.❗❗❗ ► Want to reuse sprayed paint? ❓ In this case, you must use different filters for each paint in filtered booths. By using a mono-cyclone, you save on filter costs and can easily reuse the sprayed paint. ⚡️⚡️⚡️Upgrade your existing filtration cabinet with a mono-cyclone. This saves you from needing different filters when using a variety of pigments. ✳️ Why a mono-cyclone? ❓ ✨1 – According to environmental inspectors, it is the superior choice. A mono-cyclone does not require an exhaust connection. ☘️ ✨2 – A mono-cyclone ensures occupational safety.⚠️ In the event of filter failure in filter booths, ductwork can become blocked by powder paint, posing a fire hazard. Mono-cyclones prevent this risk. ✨3 – Green technology. ♻️ If you punch holes in your filters within filter booths, paint can be released into your workshop, creating pollution and airborne paint particles. The mono-cyclone reduces environmental contamination in the spray area, providing a healthier workspace and protecting the environment. ✨4 – Enables fast color changes ⌛ This saves time and paint by making the booth easier to clean. ✨5 – Economical ☀️ The mono-cyclone bag filter does not require paint changes. Its washable function allows for reusability. ✍️✍️ Order the mono-cyclone compatible with your current booth now. ⚡️⚡️⚡️ Our mono-cyclones are equipped with their own control panels. They are supplied with 2 inlet funnels, suction hoses, and connecting clamps for integration into your existing filtration booth. ‍⚕️‍⚕️‍⚕️ ►► You can easily install your mono-cyclone by making 2 openings on the rear wall of your filtration booth. Caedpfxoggx E De Afqoa ⭐ Follow us for new promotions ⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️ All our machines come with CE certification, and ATEX certificates are available for applicable machines.☀️

Stanje: delavnici obnovljeno (rabljeno), Rated motor power: 2.2 kW / 5.2 A Rated voltage: 380 V / 50 Hz / 3-phase Rated air flow: 1350 m³/h Caodpfxjv Azcyj Afqja Rated negative pressure: 2850 Pa Main switch + start and stop Manual filter cleaning Extraction nozzle: 140 mm 1 container, diameter 800 mm

Leto izdelave: 2025, Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 58 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Shipping available: 30-day delivery ✈️ ✅✅✅ Energy Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a range of financing options to ensure your investment has the greatest chance for success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨ Buy directly from the manufacturer and benefit from better prices and quality! ✨✨ Benefit from 40 years of Proton’s expertise in surface coating technologies. ➖➖➖➖➖ ☘️ Environmentally friendly ☘️⚡️ Green Energy ⚡️☘️ ⭐ Powder Curing Oven with Gas or Diesel Heating - BOXLINE 15-3025 ✔️ Internal dimensions: 1500*3000*2100 mm ✔️ External dimensions: 1780*4000*2500 mm ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow (fan): 6,800 [m³/h] ✔️ Circulating fan power: 2.2 [kW/h] ✔️ Digital temperature control, continuously adjustable up to 220°C ✔️ Sandwich panels: Interior 1 mm galvanized steel, Exterior 1 mm powder-coated steel ✔️ Adjustable air outlets and air duct channels for uniform air distribution ✔️ Adjustable curing temperature, curing time, and exhaust fan operation ✔️ Audible signal at the end of curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm mineral wool. Walls: 140 mm (50 mm rock wool + 100 mm glass fiber) ✔️ Heating method: Indirect heating ✳️Operating Principle✳️ This oven is designed for heating parts coated with powder paint. The coating polymerizes at approx. 200°C (depending on the type of powder used) and forms a film on the metal surface. Temperature control is performed by a control unit, which receives signals from a temperature sensor inside the oven. ✳️Oven Body✳️ Caedpeghf R Uofx Afqoa The body of the polymerization oven consists of thermally insulated panels, vertically interlocked and sealed with heat-resistant compound. Conveyor gaps at the oven door channels can be provided as required. Optional double swing doors are available. ✳️Heat Exchanger✳️ The heat exchanger is installed on the side of the polymerization oven housing. Its internal design and materials allow the chamber temperature to be raised up to 230°C and maintain acceptable temperature differentials at various locations. Heat exchanger made from 3 mm thick AISI310 grade STAINLESS STEEL. ✳️Recirculation Fans✳️ Air circulation inside the oven is accomplished by four recirculation fans with insulated chassis. Wing-type air impellers are commonly used. ✳️Digital Fully Electronic Temperature Controller✳️ ✳️Exhaust Fan✳️ Used for extracting and discharging gases produced during powder polymerization in the oven. If required, the exhaust fan can run continuously after a certain period or be activated automatically at intervals. ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Nominal volumetric flow rate V_nom 750 m³/h, extraction nozzle D=100 mm, minimum volumetric flow rate V_min 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, rated speed 2860 rpm, connection 380V 3Ph 50Hz Cjdpfx Aev Azfzsfqsaa

Stanje: rabljeno, Leto izdelave: 2014, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, and leasing programs.✳️ ✨✨Buy directly from the manufacturer and secure your price and quality advantage!✨✨ Benefit from 40 years of Proton’s experience in surface coating technologies. ➖➖➖➖➖ ✅System Contents: ► 1 unit – Large gas-heated powder oven ► 1 unit – Automatic powder coating booth ► 1 unit – Small electrically heated powder oven ► 1 unit – Manual mono-cyclone powder coating booth ► 1 unit – Room-type manual mono-cyclone powder coating booth ► 1 unit – Automatic chemical pre-treatment and drying system ► 6 units – Automatic powder coating gun ► 3 units – Manual powder coating gun ► 1 unit – Automatic powder recovery unit Csdpeiivq Uefx Afqjaa ► 5 units – Mono-cyclone ► 1 unit – Automatic control panel ► 1 unit – Automatic speed-controlled bar transfer system ► 2 units – Mobile speed-controlled platforms ► 12 units – Parking stations ► 300 m – Conveyor rail ► 12 units – Suspension bars Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You can schedule an appointment to inspect the machines. The system has been in operation for 8 years. As the direct manufacturer of the plant, we can make the modifications you require to the machines by mutual agreement. Does the current layout not fit your installation area? We can adapt the configuration to your site. Please review the system’s PDF file using the link below.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, filtrirna površina: 21 m², volumenski pretok: 3,2 m³/h, skupna masa: 770 kg, skupna širina: 900 mm, skupna dolžina: 2.360 mm, skupna višina: 2.000 mm, vhodna napetost: 400 V, raven hrupa: 67 dB, priključek za stisnjen zrak: 6 letvica, premer ekstrakcijske šobe: 200 mm, moč: 4 kW (5,44 KM), The SPÄNEX deduster type SMU 32 / 45 BA with container and discharge unit is a compact disposal station designed for commercial use and installation within the workspace. Consisting of: deduster with vacuum-tight housing, suction nozzle and backdraft damper, antistatic filter elements with jet pulse cleaning, high-performance radial fan arranged on the clean-air side with three-phase motor (energy efficiency class IE3), integrated exhaust silencer, and air outlet grille; feed container with 0.55 kW discharge unit; control unit with CEE device plug (phase inverter). The control unit is designed for automatic operation. The automatic start-up control for up to 6 machines and automatic filter cleaning with runtime extension are included. For automatic start-up, either pickup coils or potential-free contacts from the machine can be used. Optional: Conversion to chip collection container € 1,270.00 net Cajdst Ug Sgspfx Afqja Alternatively: Installation of a used rotary valve € 1,690.00 net

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1995, Connected load 380V 2.2kW Suction nozzle 200 mm Mobile 2 x chip collection bins, each 190 l Airflow rate 2500 m³/h Dimensions (H x W x L): 2160 x 830 x 1900 mm Caedpfx Aovz Uhyofqoa

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-28/2018, nazivni pretok: 2.500 m³/h, skupna širina: 750 mm, skupna dolžina: 2.000 mm, skupna višina: 1.980 mm, priključek za stisnjen zrak: 6 letvica, moč: 3 kW (4,08 KM), SPÄNEX dust extractor, model SMU 25 Connected load: 380V, 5.6A, 3kW Weight: approx. 400 kg Mobile design Extraction nozzle: 180 mm Cedetwp Nzjpfx Afqsaa Nominal airflow: 2,500 m³/h Operating mode: manual/automatic Electro-pneumatic filter cleaning Pneumatic connection: 6 bar Dimensions (HxLxW): 1980 x 2000 x 750 mm

Stanje: rabljeno, Power connection: 480V, 4kW Filter surface area: 15.8 m² Nominal air flow: 3,200 m³/h Minimum air flow: 2,262 m³/h Extraction connection: Ø 200 mm Weight: approx. 550 kg Dimensions (LxWxH): 2,400 x 900 x 2,100 mm Csdpfx Afevz U Sreqjaa

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 200642, volumenski pretok: 3.200 m³/h, RIEDEX – Dust Extractor Model DM-200/M-B Maximum airflow: 3,200 m³/h Motor power: 4.0 kW Without extinguishing system Left-hand version Automatic (motorized) filter cleaning Csdpfx Afstwz Hleqoaa Supplied with chip collection bins