Pnevmatski Ventil nakup rabljenega (4.598)

Stanje: skoraj kot novo (rabljeno), Originalni vmesni obroč CATERPILLAR (gumijasti obroč za pnevmatike) za CAT mobilne in pretovorne bagre. Na zalogi je še 7 kosov. Gisdpfxoyk Dahs Agyop

Stanje: rabljeno, Electric dual screwdriver unit with automatic feed and pneumatic double-stroke mounted on handling device, handling system, manipulator for screwdriving technology Screwdriving unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double-stroke via Festo valves and cylinders. Additionally, various monitoring devices are installed for full automation. Screwdriver 1 consists of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Direct drive Screwdriver 2 consists of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Offset drive Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric Screwdriver Unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material no.: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gear unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight output Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset output Rexroth Type: 2VNA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Max. payload: 14 kg Handyflex outreach: 250 to 650 mm Handyflex outreach expanded: max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement Gsdpfx Ajfx Hyfjgyeip - Adjustable payload - Adjustable stop for limiting the radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Blue steel pallet as base plate not included Blue steel base plate is not part of the delivery.

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch Giedpfedzqblex Agysp - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Stanje: rabljeno, Pneumatic screwdriver, air screwdriver DESOUTTER Pneumatic screwdriver, inline screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Selector switch for clockwise and counterclockwise rotation (rotary ring control) - Without automatic shut-off Gijdpjfgrrhsfx Agyjp - Pneumatic control line Ø 4 mm - Air supply connection for screwdriver function min. Ø 10 mm - Aluminium bracket for handling device - Screw feed Ø 12 mm (internal diameter) Dimensions L x W x H: 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Stanje: novo, Hydraulic Cable Winch HAW4000 without Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the hydraulic attachment winch HAW4000, you can simplify numerous tasks. Maximum cable capacity at 4,000 kg pulling force: 60 m using 10 mm wire rope. Maximum cable capacity at 3,000 kg pulling force: 90 m using 8 mm wire rope. Maximum cable capacity at 1,700 kg pulling force: 150 m using 6 mm wire rope. Maximum cable capacity at 3,500 kg pulling force: 150 m using 6 mm synthetic rope. Maximum cable capacity at 2,000 kg pulling force: 220 m using 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ For viticulture, agriculture, forestry, and horticulture ⦁ For construction, civil engineering, and road construction ⦁ For pulling out stumps and trees ⦁ As an auxiliary winch on skidding cranes and excavators ⦁ As a winch for tractors, agricultural machinery, and grape harvesters A robust steel construction with 3-way mounting options (left, right, rear) using M16 threaded holes, offering multiple possibilities for winch attachment. (Threads are cut and painted. For corrosion protection, they must be recut before use.) Large, greaseable cable roller for a long service life of the wire rope. ⦁ Maximum operating pressure: 210 bar peak ⦁ Oil flow up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4,000 kg ⦁ Cable speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Color: red The winch can be mounted in various positions. A hydraulic brake is available as an option. Gisdpfx Aefn Tviegyep Depending on your required pulling speeds and forces, we can offer different options. Contact us – we are happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with cable inlet: 970 mm ⦁ Width front: 200 mm ⦁ Width rear: 300 mm ⦁ Bearing width: +50 mm ⦁ Motor width: +300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: novo, Hydraulic Winch for Log Splitters, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture and many other applications. This hydraulic attachment winch can make a wide range of tasks easier for you. - Pulling and positioning firewood for the log splitter - Pulling logs onto trailers - Extracting rootstocks and trees - Use as an auxiliary winch for forwarding cranes and small excavators - Winch for small tractors and narrow-track tractors Rugged steel construction with triple-sided mounting ability (left, right, rear) using 12 threaded holes, providing numerous installation options (threads are pre-cut and painted. They require re-tapping with a tap before use to remove the corrosion protection coating). Supplied with a 20 m long, 6 mm thick steel cable. Large drum for extended cable service life. We fit hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on your speed and pulling force requirements. Max. working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Max. pulling force: 1,700 kg Gijdpjdf Ud Sefx Agyop Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pivot mount: 570 mm Width front: 120 mm Width rear: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm Winch available for bolting or welding installation. This version is equipped with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Images 2, 3 and 4 are example installation illustrations!

Stanje: novo, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, agricultural tractors, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can greatly facilitate many tasks: Gedpfx Aodf Ufdsgyoip - Pulling and positioning firewood to the log splitter - Loading logs onto trailers - Extracting root stocks and trees - As an auxiliary winch for forestry cranes and compact excavators - As a winch for small tractors and narrow-gauge tractors Featuring a robust steel construction with three-sided mounting possibilities (left, right, rear) and 12 threaded holes, offering versatile mounting options for the winch (threads are pre-cut and painted. They should be retapped prior to use for corrosion protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We fit hydraulic motors ranging from 50 to 630 cc (standard = 400 cc), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow rate Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version comes with an electric hydraulic valve and hoses for the motor. Article number: HAW1700-EV NOTE: Images 2, 3, and 4 are mounting examples!

Stanje: novo, Hydraulic Winch HAW4000 with Electric Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the HAW4000 hydraulic attachment winch, you can significantly ease a wide variety of tasks. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard configuration includes 50 m of 10 mm wire rope. ⦁ Suitable for viticulture, agriculture, forestry, and horticulture ⦁ For building construction, civil engineering, and road construction ⦁ For pulling out rootstocks and trees ⦁ As an attachment winch for timber cranes and excavators ⦁ As a winch for tractors, work machines, and grape harvesters Robust steel construction featuring mounting options on three sides (left, right, rear) with M16 threaded holes. This allows for a wide range of installation configurations. (Threads are machined and painted; for corrosion protection, threads must be re-cut before use.) Large, greaseable cable pulley ensures long service life for the wire rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow: up to 200 l/min, temporarily max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Colour: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on your required pulling speed and force, we can offer you different options. Please contact us for expert advice. Gsdpfjfn Tvksx Agyeip Dimensions: ⦁ Length: 850 mm ⦁ Length with rope guide: 970 mm ⦁ Width (front): 200 mm ⦁ Width (rear): 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, DMN-WESTINGHOUSE PTD plug deflectors are specially designed for the conveying of powders and pellets with minimal interference in pneumatic conveying systems. PTD plug diverter valves are used in the chemical, pharmaceutical, plastics, food, and other related industries. Smooth product flow is ensured by precision machining, effective sealing, and completely unobstructed passage. The user-friendly, foolproof design allows for quick internal inspection, cleaning, and onsite replacement of seals as needed. The PTD design complies with all current occupational safety regulations, ensuring there are no external moving parts. Pressure up to 3 bar g with static seals PTD 80 Housing made of aluminium, pipe stainless steel Ø 76.1 x 2.0 mm Pneumatic operation 5/2 valve with double solenoid, 24 V DC With 2 inductive limit switches Giedpfsmgb Hhsx Agysp

Stanje: dober (rabljeno), Hidravlični ventil, tlačni ventil, polnilni ventil, predpolnilni ventil -Proizvajalec: Rexroth, polnilni ventil tip ZSF 160 FO-1-14/M/01 -Klasifikacija: NG160ZSF-160F1-1 -Nazivna velikost: 160, A B, mehanski pogon Giedpfxot Ultis Agysp -Priključki: G 1 1/4" / G1/2" -Posamezne komponente: glej fotografije -Skupne dimenzije: 470/310/280 mm -Teža: 49 kg

Stanje: rabljeno, Na voljo je 7 pnevmatskih pickerjev za prodajo. Naprave je izdelal sam kupec. Gsdpfx Agjyrl Rdsyjip

Stanje: rabljeno, pneumatic eyeletting machine Falzoni F401.9.S21 Year of manufacture: 2000 - Serial number: 3710 Very good condition Giedpfx Agjv Azt Ejysp Online video inspection possible via WhatsApp, MS Zoom, or Telegram. In stock in Emskirchen/Nuremberg - Available immediately - Can be tested on-site.

Stanje: dober (rabljeno), Na prodaj profesionalni respirator / transportni ventilator Dräger Oxylog 3000 Plus – naprava, ki se uporablja v reševalnih vozilih, reševalnih službah in zdravstvenih ustanovah. Stanje: naprava se vklopi in deluje, zaslon je čitljiv, gumbi in vrtljivi gumbi delujejo. Vizualno običajni znaki uporabe, ohišje ima lokalne kozmetične poškodbe, ki ne vplivajo na funkcionalnost ali delovanje naprave. Funkcije: transportna ventilacija za odrasle in otroke, načini ventilacije skladno z modelom Oxylog 3000 Plus, nastavitev dihalnih parametrov, pregleden zaslon z alarmi. Oprema: respirator Dräger Oxylog 3000 Plus, transportna torba, kabli in priključki vidni na slikah. Dodatne informacije: rabljena medicinska oprema, prodaja točno v stanju, kot je na slikah. Idealno kot rezervni transportni ventilator za rešilce, bolnišnice ali tehnične enote. Gedpfxex Tuyxe Agyeip

Stanje: novo, • KSB / amri BOAX-SF loputni ventil • Premer: DN200 • Delovni tlak: PN16 • Tesnilo: EPDM (za vodo, HVAC, industrijo, požarno zaščito) • Temperaturno območje: do 130°C • Material: nodularna litina z epoksi premazom • Pogon: ročni ročaj z zaklepnimi položaji • Ventili niso bili uporabljeni, skladiščeno stanje, letnik izdelave 2021 • Pripravljeno za uporabo, 100% delujoče • Idealno za vodne, industrijske, hidrantske in protipožarne sisteme. - CENA JE ZA 1 VENTIL. Gijdpfx Agexyq Icoyjp

Stanje: kot nova (razstavni stroj), Festo Pneumatic Cylinders RA1942 Manufacturer: Festo Cylinders, Some units still in original packaging. The prices listed are per piece. 8 x ADVU-25-10-P-A €86.39 7 x ADVU-40-15-P-A €128.46 8 x ADVU-40-20-A-P-A €131.49 4 x ADVU-25-20-A-P-A €89.60 8 x DNC-63-160-PPV-A €198.00 1 x DNC-50-125-PPV-A €165.03 7 x DNC-40-80-PPV-A €139.50 1 x DNC-40-200-PPV-A €149.01 2 x DNU-32-50-PPV-A Price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A €624.99 1 x FENG-40-200-KT €474.99 4 x DMM-25-15-P-A €46.38 1 x DFM-32-50-PA-GF €228.55 8 x DNC-32-40-PPV-A €120.54 1 x DNC-32-50-PPV-A €121.15 10 x DNC-32-80-PPV-A €122.93 10 x DNC-40-50-PPV-A €137.13 3 x DNC-50-80-PPV-A €160.87 2 x DNC-50-50-PPV-A €157.85 5 x DSNU-25-25-PPV-A €43.28 4 x ESNU-25-20-P-SA Price on request Giodpfsk Abl Nex Agyep 1 x DSNU-25-10-P-A €36.59 2 x DSNU-20-20-P €34.65 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A €34.65 1 x DSNU-20-50-PPV-A €40.77 2 x DGPL-40-450-PPVA-KFB Price on request 7 x DNC-40-500-PPV-A €172.76 7 x DSNU-32-80-PPV-A €52.08 4 x DSNU-32-60-PPV-A €57.12 6 x DZF-25-12-A-P-A €110.52 1 x DZF-32-A-?-A Price on request 2 x DZF-32-125-P-A-SA €126.57 2 x DSNU-25-125-PPV-A €45.05 1 x DSNU-25-125-PPV-A+2 SENSORS €101.30 1 x DSNU-25-300-PPV-A €48.35 1 x DNC-63-160-PPV-A-KP €815.28 2 x DNC-63-160-PPV-A €198.01

Leto izdelave: 2022, stanje: rabljeno, Carsoe Group Anytray Buffer 1500 – Pnevmatski sistem za začasno shranjevanje pladnjev Proizvajalec: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Leto izdelave: 2022 Tip stroja: Sistem za začasno shranjevanje/akumulacijo pladnjev Opis Carsoe Anytray Buffer 1500 je pnevmatski sistem za začasno shranjevanje in akumulacijo pladnjev, zasnovan za upravljanje pretoka pladnjev znotraj avtomatiziranih linij za predelavo in pakiranje hrane. Sistem stabilizira pretok izdelkov in preprečuje prekinitve med posameznimi stroji v produkcijski liniji. Naprava je izdelana iz higiensko nerjavečega jekla, zato je primerna za zahtevna živilska okolja, še posebej v linijah za predelavo morske hrane in beljakovinskih izdelkov. Tehnične specifikacije - Proizvajalec: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Leto: 2022 - Moč: 0,46 kW - Napajalna napetost: 230 VAC + N + PE - Frekvenca: 50 Hz - Tlak zraka: 6 bar - Največji kratkostični tok: 6 kA - SO-No.: FOD 220002 - Kataloška številka: P09390 Ključne lastnosti - Pnevmatski sistem za začasno shranjevanje pladnjev - Zagotavlja stabilen pretok izdelkov v proizvodnih linijah - Higienska nerjaveča konstrukcija - Primeren za visokozmogljiva živilska okolja - Enostavna integracija v avtomatizirane sisteme za ravnanje s pladnji Uporaba - Proizvodne linije za morsko hrano Gijdpfxjyt Hu Tj Agysp - Proizvodnja gotovih obrokov v pladnjih - Avtomatizirane pakirne linije - Živilski obrati Stanje Rabljeno.

Stanje: rabljeno, Nouveau mandrin de précision, mandrin de précision Mandrin de puissance de précision à 3 mors Mandrin pneumatique haute précision KITAGAWA KPC63C100 EP Mandrin de précision pneumatique à 3 mors avec cylindre intégré Mandrin n° L1208 - P - EP Année 2011 Diamètre extérieur : 150 mm Plage de serrage extérieure : env. 3-135 mm Plage de serrage intérieure : env. 6-149 mm Course de mors : Ø 2,5 mm Force de serrage max./mors : 11,6 kN Répétabilité : 0,0010 mm Vis de fixation des mors : M5 x 16mm, 4 pcs par mors Vis de montage du mandrin : 6 pcs M6 x 65 mm Vitesse max. : 4000 tr/min - Neuf, emballé dans la boîte d'origine - Carton ouvert uniquement pour les photos Poids (mandrin) : 6,3 kg Poids avec boîte : 8,5 kg Neuf, inutilisé, état neuf issu de stock Compatible avec la série DMG WASINO G et de nombreux tours japonais. Gisdpfsyif I Iex Agysp

Leto izdelave: 2009, stanje: skoraj kot novo (rabljeno), Tuflin plug valve DN 80 with pneumatic actuator and electric control module Manufacturer: Xomox Gijdpfx Aged Rww Isyjp Nominal diameter: DN 80 Material: 1.4408 (V4A Stainless Steel) Pneumatic actuator: Part no.: 716301-5 Item no.: XRP-RO53800148KXD40 Year of manufacture: 2009 Pmax (psi): 5/70 QSP: 8 In very good condition! Tuflin plug valves partially unused, therefore as new!

Stanje: zelo dobro (rabljeno), Rexroth regulator 4WRKE27W3-500L3X/6EG24 MNR: R900972662 Gisdpfxoyitg Ij Agyjp MNR: R900619277 za Krauss Maffei Fotografije so vzorčne slike. Ventil se lahko razlikuje od prikazanega na fotografijah.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, 1 lot approx. 15x Revo END KSB ROLL actuators / fittings / rotary actuators / actuators ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only sold as a complete lot Used, dismantled from roll-type washing systems Item location: 75053 Gondelsheim, Germany Used condition, see pictures Godpfsum I Sfjx Agyeip Shipping via freight forwarder or collection by appointment

Stanje: novo, For sale: GEFA butterfly valve DN200 with Prowal actuator. - BRAND NEW. Godpfx Agov T T Amsyoip - PRICE LISTED IS FOR 1 PIECE/////

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Proporcionalni ventil Rexroth R900907019 4WRSE6W8-10-21/G24K0/A1V 11 kosov popolnoma delujočih. Cena na kos: 1.950€ 1 kos v okvari. Cena: 500€ Godsx U Dn Iopfx Agyjip Prednost ima prodaja v celotnem paketu.

Stanje: novo, With 20 filters 2 motors of 15 kW each Giedpfovu Sqljx Agyjp Capacity: 36,000 m³/h 400 V x 3 phases x 50 Hz 3 fan speeds Approximate dimensions: 5 m x 3 m x 2 m Serial number: 20-1-267 Year of manufacture: 2020

Stanje: rabljeno, številka stroja/vozila: IC1303, Leto izdelave: 2016, obratovalne ure: 22.710 h, nosilnost: 3.000 kg, dvižna višina: 4.700 mm, gradbena višina: 2.195 mm, tip motorja: utekočinjen naftni plin (LPG), proizvajalec: Jungheinrich Godpfx Agjydtn Ioyoip

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno), Pneumatic setting and leveling device for band saws. Gjdpfod Sl H Hjx Agyjip