Vzvod Ventilu Pnevmatski nakup rabljenega (902)

Stanje: novo, Sheet length: 1,020 mm Sheet thickness: 1.5 mm Total power requirement: - Weight approx.: 450 kg Dimensions (LxWxH): 2000 x 850 x 1500 mm Technical Data Sheet thickness: 1.5 mm Cutting length: 1270 mm Length: 2,300 mm Width: 1,050 mm Height: 1,550 mm Weight: 490 kg Equipment Kjdpfod Ab Hbjx Agkodw Suitable for through-feed sheet cutting – allows for cutting of unlimited lengths Angle stop Upper blade with counterweight Rear gauge with spring-loaded stop, adjustable via hand wheel and clamping lever Angle gauge Swivelling hold-down device Operating instructions available in GERMAN and ENGLISH

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni stroj za mikroudarno označevanje PRO PEN P5000 (GravoTech Marking SAS), ki ga distribuira skupina HAHN+KOLB. Povsem industrijska oprema, namenjena trajnemu označevanju kovinskih in plastičnih delov – serijske številke, logotipi, kode, proizvodne oznake. Tehnični podatki: • Model: Propen P5000 Pn/d • Leto izdelave: 2010 • Napajanje: 100–240 V, 50/60 Hz • Moč: 150 W • Obratovalni tlak: 5,5 bara (pnevmatski pogon) • Proizvajalec: GravoTech Marking SAS, Francija • Operaterska plošča z zaslonom na dotik + tipkovnica HP • Stabilna delovna miza z vodili. Stroj je popoln, delujoč in pripravljen za takojšnjo uporabo. Idealen za delavnice, proizvodne obrate, orodjarne in povsod, kjer je zahtevano hitro in natančno trajno označevanje. Zelo dobro stanje – naprava je vzdrževana, z minimalnimi sledmi uporabe. Kodpow R Spqofx Agkedw

Stanje: rabljeno, Hidro-pnevmatski obdelovalni primež HILMA - ROEMHELD Tip SMPH 125 Širina čeljusti: 125 mm Višina čeljusti: 45 mm Vpenjalna sila: 3 toni pri 7 bar Vpenjalna sila: 2 toni pri 5 bar Vpenjalni razpon: 0 do 210 mm Ksdpfx Agexw Rdfekodw Maksimalna odprtost: 214 mm Višina vodila: 67 mm - Hidro-pnevmatski ojačevalnik sile - 3 vpenjalna območja nastavljiva s pomočjo zatiča od 0 do 214 mm Dimenzije D x Š x V: 550 x 260 x 135 mm Lastna teža: 33 kg Dobro ohranjen

Stanje: kot nova (razstavni stroj), Festo Pneumatic Cylinders RA1942 Manufacturer: Festo Cylinders, Some units still in original packaging. The prices listed are per piece. 8 x ADVU-25-10-P-A €86.39 7 x ADVU-40-15-P-A €128.46 8 x ADVU-40-20-A-P-A €131.49 4 x ADVU-25-20-A-P-A €89.60 Kedpfx Agjk Abl Noksdw 8 x DNC-63-160-PPV-A €198.00 1 x DNC-50-125-PPV-A €165.03 7 x DNC-40-80-PPV-A €139.50 1 x DNC-40-200-PPV-A €149.01 2 x DNU-32-50-PPV-A Price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A €624.99 1 x FENG-40-200-KT €474.99 4 x DMM-25-15-P-A €46.38 1 x DFM-32-50-PA-GF €228.55 8 x DNC-32-40-PPV-A €120.54 1 x DNC-32-50-PPV-A €121.15 10 x DNC-32-80-PPV-A €122.93 10 x DNC-40-50-PPV-A €137.13 3 x DNC-50-80-PPV-A €160.87 2 x DNC-50-50-PPV-A €157.85 5 x DSNU-25-25-PPV-A €43.28 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A €36.59 2 x DSNU-20-20-P €34.65 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A €34.65 1 x DSNU-20-50-PPV-A €40.77 2 x DGPL-40-450-PPVA-KFB Price on request 7 x DNC-40-500-PPV-A €172.76 7 x DSNU-32-80-PPV-A €52.08 4 x DSNU-32-60-PPV-A €57.12 6 x DZF-25-12-A-P-A €110.52 1 x DZF-32-A-?-A Price on request 2 x DZF-32-125-P-A-SA €126.57 2 x DSNU-25-125-PPV-A €45.05 1 x DSNU-25-125-PPV-A+2 SENSORS €101.30 1 x DSNU-25-300-PPV-A €48.35 1 x DNC-63-160-PPV-A-KP €815.28 2 x DNC-63-160-PPV-A €198.01

Stanje: dober (rabljeno), Pnevmatski ventil, ročni vzvodni ventil, končno stikalo, magnetni ventil, ventil za zrak, tlačni ventil, blok ventilov, krmilni blok, vklopni ventil, ventil za povečanje pritiska Kjdoxx Sm Ropfx Agkodw -Proizvajalec: Festo, pnevmatski ventil z vzvodom na rolo -Tip: 8982 L-3-1/4 B -Delovni tlak: 0,95...10 bar -Količina: 4x ventil na voljo -Cena: na kos -Dimenzije: 105/50/25 mm -Teža: 0,2 kg/kos.

Stanje: dober (rabljeno), številka stroja/vozila: Code: 0168, Koda: 0168 Znamka: STROMAB Model: ST 3000 - CE Standard Rotacijski pnevmatski vpenjalni stroj, primeren za deske, lepljence, letvice za lepljenje plošč, mizne plošče, stopnice ter elemente za krste – CE standard. Motorni vrtljivi sistem z nožnim pedalom za sprostitev in priročnim kontrolnim kolesom za vrtenje delovne mize. Kodjl Snzvepfx Agksdw Delovna zmogljivost: 3000 x 1200 mm Št. 9 prednjih pnevmatskih stiskal (3 na vsaki strani) Št. 18 vertikalnih stebrov s cilindrom, premer 80 mm (6 na vsaki strani) Št. 3 delovne postaje Sila vertikalnih cilindrov: 8 bar, 400 kg Dnevni izkoristek (8 ur): 263 m2 Mehanske varnostne pregrade Skupne mere: 4800 x 2850 x 2300 mm Teža: 1100 kg

Stanje: rabljeno, Leto izdelave: 1993, številka stroja/vozila: 1273, PNEUMATIC OIL PENDULUM MITRE SAW BOTTENE MOD. TP500 - USED Kdedpfx Agjwr Uc Rekow - Infeed roller conveyor - Outfeed roller conveyor - No. 5 pneumatic stops - Voltage: 380/50 - Serial no.: 1273 - Year: 1993

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), LARIUS 10:1 Pneumatic Press For sale: Pneumatic press from the renowned manufacturer LARIUS, made in Italy. The device is designed for pumping high-viscosity fluids – ideal for greases, adhesives, industrial paints, silicones, etc. Technical specifications: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air operating pressure: 3–7 bar (40–100 psi) Kdjdpfx Ajwqx H Regkew • Output: 12 l/min at 60 cycles (3.2 gal/min) • Year of production: 2004 • Manufacturer: LARIUS – Italy Condition: Very good

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for the transport of bulk materials such as seeds, grain, peas, corn, as well as conveying wood pellets, sawdust, plastic granules, sand, abrasive powders including corundum, and also steel fibre reinforcement for concrete mixers or batching plants. Our systems can also be used for aeration of various materials, including hay, cereals, herbs, and more. They are ideal for supplying fresh air to production halls, poultry houses, and barns. Additionally suitable for extraction of smoke, dust, or harmful welding gases. Flexible pipes can be used as required. High-performance blower equipped with a 5.5 kW/400V motor. Robust, sectional design made of high-grade steel; pipes and bends are manufactured from 3.6 mm thick steel, ensuring reliable transport of even the most challenging materials while maintaining exceptional durability. We are also able to supply both light and heavy-duty flexible hoses for transport of the above-mentioned materials. These machines can easily move materials over long distances (the actual distance depends on the specific material). The high blower capacity enables both horizontal and vertical conveyance. We have extensive manufacturing experience. Upon request, components or the entire system can be supplied in STAINLESS STEEL (including pipes), or galvanized finish. We adhere to the Kaizen production method. Kaizen, meaning "change for better" (in Japanese, "kai" means change and "zen" - for the better), is a philosophy and management approach focused on continuous improvement of company processes and operations. PLEASE CONTACT US PREFERABLY VIA EMAIL In the standard version, we supply only the blower unit, fitted with a flanged outlet for connecting various pipes. We manufacture pipes and bends made of 3.6 mm thick steel. Kodpfow Aqamjx Agkodw Impeller speed: 2800 rpm (OPTION: model with wide-range electronic speed control, available from stock). Using speed controllers for three-phase motors offers many benefits, including energy savings, precise torque control, and increased system efficiency. Furthermore, they reduce energy losses, positively affecting production efficiency. The blower is very efficient. The machine features modular, easily replaceable segments (fastened with M8 bolts) which are always in stock, allowing for extensive versatility of use. Individual modules can also be purchased separately (e.g., blower only). We can customise the design to meet the client’s requirements. The blower is easy to transport (one person can easily move it), and it can be carried in a small car, van, or trailer. It is also simple to assemble and operate. We also supply additional wheels to facilitate mobility (two types available). Net price for the basic set without electronic speed control: PLN 10,300 / EUR 2,453 Net price with electronic speed control: PLN 13,400 / EUR 3,190 Price for the blower alone, without feed hopper: PLN 10,300 (EUR 2,452) Price for galvanized air distributor (with 2 pipe inlets/outlets and flanges with fixing holes): PLN 1,900 (EUR 452) Price for galvanized air distributor (with 3 pipe inlets/outlets and flanges with fixing holes): PLN 2,400 (EUR 571) Additional wide-range electronic speed controller for motor and blower: PLN 2,900 (EUR 690) For further information, please contact us via email. We operate 24/7.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1 h, številka stroja/vozila: CF 10 T / 1, Naš zložilec za dno škatel CF 10T s polnilno postajo je cenovno ugoden vstopni model. Kartonske škatle dolžine 200 do 600 mm in širine 150 do 480 mm so za polnjenje fiksirane in pnevmatsko predane na naslednjo postajo. Ta enostaven model ima revijo in deluje na običajno gospodinjsko elektriko. CF 10T za delovanje potrebuje stisnjen zrak. Kdedpfoxqc R Dex Agkjw Tehnični podatki: Mere: 1400 x 950 x 700-860 mm Lastna teža: 90 kg Obratovalna napetost: 230 V / 600 W Stisnjen zrak: 6 kgf/m3 Delovna višina: 700 – 800 mm Raven hrupa: < 75 dB(A) Formati kartonov: Dolžina 200 do 600 mm Širina 150 do 480 mm Višina 120 do 500 mm Valjčna proga ni vključena v ceno, lahko pa se dokupi kot dodatna oprema. Na željo je možna tudi kombinacija z enim izmed naših zapiralcev škatel.

Stanje: dober (rabljeno), Pnevmatski valj, zračni valj, pnevmatski bat, zračni bat -Proizvajalec: Festo, standardni valj tip DSBC-40-20-PPVA 2123166 -Hod: 20 mm -Bat: Ø 40 mm Kdedpfx Agexwvp Tokow -Batnica: Ø 16 mm / M12 -Maks. tlak: 12 bar -Količina: 16x valjev na zalogi -Cena: na kos -Dimenzije: 180/55/H55 mm -Teža: 2,6 kg/kos.

Stanje: novo, Leto izdelave: 2024,

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 1377, STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE STANDARD – USED - Equipped with TIGERSTOP electronic positioning stop, 4000mm Ksdst U Izpjpfx Agkedw - Infeed roller table, 4500mm - Outfeed roller table, 4500mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (width) x 60 mm (height), 135 mm (height) x 280 mm (width) - Motor: 10 hp - 415 volt - Serial no.: 1377 - Year: 2007

Leto izdelave: 2001, Stanje: dober (rabljeno), Top-closing stapler with clinching anvils. Designed for use with coiled staples. Used for closing filled foldable boxes made from single and double-wall corrugated cardboard. Cost-effective closure of corrugated cartons with overlapping and joining flaps using clinching anvils. Suitable for both single and double-wall corrugated cardboard. Kdedpfx Ageva Nq Hokow Adjustable penetration depth matched to the box type. Ideally suited for use in packaging lines where high availability and productivity are required. • Housing made from hardened steel for long service life. • Instant return clinching anvils: up to 20 staple cycles/minute • 1,000 staples per coil: up to 10 times less frequent reloading compared to standard staplers For optimal working comfort, use a balancer together with a pivot arm system and the appropriate spiral hose. See > accessories. MERLOCK pneumatic stapler • For CR 1/34 spiral staples, arm length 18 mm • Equipped with a sound damper • With automatic return of the clinching anvil • Clinching anvils are specially hardened for extended lifetime.

Stanje: rabljeno, Leto izdelave: 2021, Vpenjalka za predale - STROMAB STC 2500 B Tehnični opis: • Delovna zmogljivost: 2100 x 1000 mm • Št. 2 delovni postaji • Dvoročni varnostni gumb Kjdpfx Agoxg I Slskedw • Št. 8 pnevmatskih valjev, premer 115 mm • Potisk na valj: 700 kg • Št. 8 kotnikov iz litega železa, višina 170 mm Konfiguracija stroja: • Frekvenca: 50 Hz • Standard: CE • Električna napetost: trifazna 400 V

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 1 h, številka stroja/vozila: CF 10 T / 1, Naš zložilec za dno škatel CF 10T s polnilno postajo je cenovno ugoden vstopni model. Kartonske škatle dolžine 200 do 600 mm in širine 150 do 480 mm so za polnjenje fiksirane in pnevmatsko predane na naslednjo postajo. Ta enostaven model ima revijo in deluje na običajno gospodinjsko elektriko. CF 10T za delovanje potrebuje stisnjen zrak. Tehnični podatki: Mere: 1400 x 950 x 700-860 mm Lastna teža: 90 kg Obratovalna napetost: 230 V / 600 W Stisnjen zrak: 6 kgf/m3 Delovna višina: 700 – 800 mm Raven hrupa: < 75 dB(A) Formati kartonov: Dolžina 200 do 600 mm Širina 150 do 480 mm Višina 120 do 500 mm Valjčna proga ni vključena v ceno, lahko pa se dokupi kot dodatna oprema. Kdodpfx Aexqc Ipsgksw Na željo je možna tudi kombinacija z enim izmed naših zapiralcev škatel.

Stanje: dober (rabljeno), Pnevmatski valj, ploščati valj, pnevmatski pogon, bat, ploščati valj Kdedpfxjxwvkqe Agksw -Proizvajalec: Festo, ploščati valj tip DZH-32-100 PPV-A 14045 -Hod: 100 mm -Batna palica: Ø 12 mm / M10 -Pmax: 10 bar -Količina: 1 kos -Dimenzije: 245/65/V80 mm -Teža: 1 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1 h, številka stroja/vozila: CF 10 T / 1, Naš zložilec za dno škatel CF 10T s polnilno postajo je cenovno ugoden vstopni model. Kartonske škatle dolžine 200 do 600 mm in širine 150 do 480 mm so za polnjenje fiksirane in pnevmatsko predane na naslednjo postajo. Ta enostaven model ima revijo in deluje na običajno gospodinjsko elektriko. CF 10T za delovanje potrebuje stisnjen zrak. Ksdpfx Aexqcxuogkodw Tehnični podatki: Mere: 1400 x 950 x 700-860 mm Lastna teža: 90 kg Obratovalna napetost: 230 V / 600 W Stisnjen zrak: 6 kgf/m3 Delovna višina: 700 – 800 mm Raven hrupa: < 75 dB(A) Formati kartonov: Dolžina 200 do 600 mm Širina 150 do 480 mm Višina 120 do 500 mm Valjčna proga ni vključena v ceno, lahko pa se dokupi kot dodatna oprema. Na željo je možna tudi kombinacija z enim izmed naših zapiralcev škatel.

Stanje: dober (rabljeno), Varilni lok - Varilni lok: za varjenje plastike, iz stroja za izdelavo mask - Termoplošče/ventilacijske šobe: po 2 kosa - Mere: glejte fotografije - Količina: 3x lok na voljo - Cena: na kos Ksdpsxwlxwsfx Agksdw - Dimenzije: 240/100/H55 mm - Teža: 0,7 kg/kos.

Stanje: dober (rabljeno), Pnevmatski cilinder, zračni cilinder, pnevmatski bat, zračni bat - Proizvajalec: Festo, standardni cilinder tip DSBC-40-320-C-PPVA - Hod: 320 mm - Bat: Ø 40 mm - Batnica: Ø 16 mm Kedpfx Agsxwkvuekjdw - Nosilec: Ø 12 mm - Maks. tlak: 12 bar - Količina: 4x cilinder na voljo - Cena: na kos - Dimenzije: 580/55/V130 mm - Teža: 2,6 kg/kos.

Stanje: dober (rabljeno), Pnevmatski cilinder, zračni cilinder, pnevmatski bat, zračni bat -Proizvajalec: Festo, standardni cilinder tip DSBC-80-160-PPVA-N3 -Hod: 160 mm -Bat: Ø 80 mm -Batnica: Ø 25 mm / M20 -Priklop: Ø 20 mm -Maks. tlak: 12 bar -Količina: 1x cilinder na voljo -Cena: na kos Kedpfoxwkr Njx Agkjdw -Dimenzije: 520/95/H170 mm -Teža: 5,2 kg

Stanje: dober (rabljeno), Pnevmatski valj, zračni valj, pnevmatski bat, zračni bat -Proizvajalec: Festo, standardni valj tip DSBC-80-100-PPVA-N3 -Hod: 100 mm -Bat: Ø 80 mm -Batnica: Ø 25 mm / M20 -Priključek: Ø 20 mm -Maks. tlak: 12 bar Kjdpexwkq Esfx Agkjdw -Količina: 2x valja na voljo -Cena: na kos -Dimenzije: 450/95/H170 mm -Teža: 4,6 kg/kos.

Stanje: dober (rabljeno), Pnevmatski cilinder, zračni cilinder, pnevmatski bat, zračni bat - Proizvajalec: Festo, standardni cilinder tip DSBC-80-300-PPVA-N3A2 - Hod: 300 mm - Bat: Ø 80 mm - Batnica: Ø 25 mm - Največji tlak: 12 bar - Količina: na voljo 4 cilindri - Cena: na kos - Dimenzije: 515/235/V95 mm Kdodpfoxwkn Rex Agkew - Teža: 7,0 kg/kos

Stanje: zelo dobro (rabljeno), Magnetni ventil, pnevmatski ventil, zračni ventil, tlačni ventil, blok ventilov, krmilni blok, vklopni ventil, ventil za dvig tlaka - Proizvajalec: Festo, vklopni ventil - Tip: MS6-EE-3/8-10V24 Kodpfx Agexvx Uvokedw - Delovni tlak: 4 - 10 bar - Količina: 2x ventil na voljo - Cena: na kos - Dimenzije: 290/185/100 mm - Teža: 1,3 kg/kos

Stanje: zelo dobro (rabljeno), Disc valve, butterfly valve, ball valve, shut-off damper, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve Kodpfxoigwcys Agkedw -Manufacturer: Bürkert, pneumatically actuated 2/2-way angle seat valve, unused -Type: 2000 A 50.0 PTFE VA -Connection: DN50 PN16 -Dimensions: 290/103/H260 mm -Weight: 4.4 kg