Pnevmatski Prisluškovanje Stroj nakup rabljenega (30.709)

Leto izdelave: 1992, stanje: rabljeno, Technical details: Operating voltage: 380 V/Hz Size range: Ø 6 to Ø 50 mm Total power requirement: 1.5 kW Approximate machine weight: 293 kg Machine dimensions: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: Pressure-controlled crimping with assembly tools Hydraulic system: 240 bar overpressure, capacity/content for 20 liters Drive: Electro-hydraulic Operation: ON/OFF switch and foot control The machine is currently equipped with die set DN 12 16 (code 220) Additional die sets available: Nwedjvc Atgepfx Abijl DN 6 - 10 (code 215) DN 20 - 25 (code 230) DN 32 (code 240) DN 40 (code 245) DN 50 (code 260) No code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Power Output: 60 kVA Throat Depth: 680 mm Arm Spacing: 115 / 415 mm Adjustable Jaw Opening: 180 mm Rated Power: 60 kVA Welding Power: 71 kVA Electrode Force: 100 to 600 daN Voltage: 380 V / 50 Hz Air Pressure (min./max.): 6 / 10 bar Cooling Water Consumption: 12 l/min Nsdju Nv Emopfx Abijwl Machine Weight approx.: 685 + 200 kg Supply Voltage: 380 V / 91 A Nominal Power: 60 kVA Connected Load: 54 kVA Dimensions L-W-H approx., Machine: 1,700 x 850 x 1,750 mm Dimensions L-W-H approx., Aggregate: 900 x 650 x 1,000 mm SPOT WELDING MACHINE - WELDING TRANSFORMER Three-phase DC Welding Machine Application: Spot, projection and series spot welding Maximum Short-Circuit Power: 89 kVA Primary Short-Circuit Current: 135 A Secondary Current = Short-Circuit Current: 25 kA, Welding Current max. 20 kA Electrode Stroke max.: 90 mm; Electrode Force min./max.: 100 daN / 600 daN Max. Stroke Rate at 10 mm stroke: 400 strokes/min Spot Armature: Electrode holder Ø 30 mm, adjustable 180 mm, Arm spacing min./max.: 115 / 415 mm Double Foot Switch Cooling unit, mobile – on wheels for portability, output 1.45 kW, pipe connection R 3/4 inch, refrigerant R22

Stanje: rabljeno, Technical details: Nwsdpfx Abju Ngdtsiel Height above floor: 930 mm Machine weight approx.: 75 kg (+ 27 kg base frame) Dimensions (L x W x H): 0.6 x 0.48 x 0.43 m EDGE BEVELING MACHINE Application: For beveling Machine table (W x D): 600 x 240 mm with guide rail (L x H): 400 x 25 mm Installed tool: Cutter approx. 50 mm with 45° milling profile Bevel width: approx. 6 mm Voltage: 380 V with ON/OFF switch

Stanje: rabljeno, Leto izdelave: 1961, Technical Details: Grinding length: 600 mm Grinding width: 200 mm Workpiece height: 270 mm Grinding length with magnet: 500 mm Distance spindle center to clamping surface, min.: 350 mm Grinding spindle speed: 1,000 to 4,700 rpm Table clamping surface: 720 x 200 mm Table load capacity: 60 kp Magnetic plate size: 455 x 180 mm (DC) Magnetic chuck: vertically tiltable 90° longitudinally Total power requirement: 2.0 kW (2.7 HP) Machine weight approx.: 1,600 + 176 kg (rectifier) Machine dimensions (LxWxH): approx. 1.4 x 1.8 x 1.7 m Transport dimensions: 1.4 x 1.8 x 1.6 m Control cabinet dimensions: L: 850 x W: 450 x H: 1,100 mm Grinding wheel dimensions: Ø 225 x 20 x bore Ø 51 mm Nwjdpfx Absu Ngg Ujiol The magnetic plate (24V) is cooled. Grinding spindle: The grinding wheel infeed is electric, vertical 270 mm, Z-axis infeed from 0.002 mm to unlimited Manual infeed: 0.001 - 0.010 mm Maximum peripheral speed permitted: 35 m/sec Equipped with coolant tank, pump, and magnetic separator, as well as a grinding wheel Ø 152 x 14 mm Plus various accessories (in cabinet), including several grinding wheels and balancing flange. The machine is prepared for extraction.

Stanje: rabljeno, Leto izdelave: 1974, Technical details: Grinding length: 600 mm Grinding width: 200 mm Workpiece height: 400 mm Magnetic chuck size: 630 x 200 mm Max. longitudinal table travel (X-axis): 710 mm Max. cross table travel (Y-axis): 250 mm Table load capacity: 110 kg / 1100 N Table speed: 1.5 – 18 m/min Grinding wheel dimensions: max. 200 x 20 x Ø 51 mm Grinding wheel dimensions (mounted): Ø 142 x 20 mm Grinding spindle speed: 2800 rpm Grinding spindle infeed: 0.01 mm Total connected load: 5.0 kW Machine weight approx.: 1.0 t Machine dimensions (LxWxH): approx. 1.8 x 1.2 x 1.9 m Extraction unit dimensions (container): 420 x Ø 350 x 680 mm The machine was used for dry grinding. Nodpfsu Ngmbsx Abiowl - Very good condition - Without dressing device - Incl. dust extraction - Incl. machine lamp

Stanje: rabljeno, Leto izdelave: 1993, Tehnične podrobnosti: Premer okrogle mize: 2x700 mm Višina brušenja: 200 mm Njdpfju Ngp Nox Abijwl Pogon brusne glave: 15 kW Maks. premer brusnega koluta: 400 mm Hitrost brušenja vretena: 1400-2800 brezstopenjsko U/min Samodejni pomik: 0,001-0,02 Maks. teža orodja: 650 kg Hitrost mize: 5-10 m/min Hitrost okrogle mize: 5-10 brezstopenjsko U/min Okrogla miza: prečni pomik 0,2...10 m/min Skupna potrebna moč: 49 kW Teža stroja pribl.: 12,0 t Dimenzija stroja pribl. DxŠxV: 6,0x3,0x2,8 m Dimenzije elektro omare DxŠxV: 2,0x0,55x2,2 m PLOSKI BRUSILNI STROJ Z OKROGLO MIZO - 2 magnetni okrogli mizi Ø=700mm - Naprava za diamantno ravnanje - Brez hladilne enote

Stanje: rabljeno, Leto izdelave: 1964, Technical details: Shaft diameter: max. 120 mm Shaft length - max.: 800 mm Nodpju Ngr Dsfx Abijwl Profile height: depth: max. 90 mm Grinding spindle speed: unknown rpm Table size: Ø 150 mm Operating voltage: 380 V Total power requirement: 1.1 kW Machine weight approx.: 0.675 t Machine dimensions approx. LxWxH: 0.75 x 0.70 x 2.0 m Application: Vertical internal cylindrical grinding of shaft faces, as well as center grinding with mounted points Spindle head technical details: - Equipped with mounted point Ø 13 mm, 60°; clamping element Ø 6 mm shank collet - Adjustment paths = vertical 950 mm via handwheel, cross 80 mm via hand crank - Dressing device with diamond, cross adjustment = 80 mm Table further details: - Equipped with fixed center 60° - Rotation speed 63 / 125 rpm - Vertical adjustment 600 mm, at height 1,100 mm, manual operation Steady rest: - Prism guide Accessories: - Fixed center L=180 mm - Fixed center L=300 mm - Various mounted points - Various clamping and auxiliary devices

Stanje: rabljeno, Leto izdelave: 1981, Données techniques : Diamètre de rectification : 240 mm Longueur de rectification : 700 mm Hauteur de pointe : 125 mm Longueur de la table : 1525 mm (pivotante) Distance broche de rectification – table min./max. : 225/410 mm Plage de vitesse de la meule : 1590 tr/min Nedpfx Aeu Ng Avjbijwl Diamètre de la meule (neuve) : 600 mm Diamètre de la meule (usée) : 450 mm Vitesse de coupe : 50 m/s Puissance totale requise : 13 kW Poids de la machine env. : 5,5 t Encombrement env. : L :2,8 x l :2,2 x H :1,8 m RECTIFIEUSE CYLINDRIQUE SEMI-AUTOMATIQUE Autres données : - Réglage de la poupée de rectification : 185 mm - Avance de la poupée de rectification : 0,001 à 0,05 mm/min en continu - Vitesse de broche pièce : 50 à 500 tr/min en continu Machine équipée de : - Fourreau à rappel hydraulique - Dispositif de refroidissement - Dispositif de dressage - Dispositif d’équilibrage de meule - Dispositif de déplacement transversal poupée de rectification - Réglage hydraulique de la table, table supérieure pivotante i.D.

Stanje: rabljeno, Technical Details: Grinding diameter: 260 mm Grinding length: 1000 mm Centre height: 130 mm Clamping length: 1000 mm Feed: manual Headstock adjustment: 280 mm, manual Total power requirement: approx. 6.0 kW Machine weight approx.: 1.5 t Machine dimensions approx. LxWxH: 2580 x 1750 x 1630 mm Non-circular grinding machine – (Crankshaft grinding machine) Intended for grinding crankshafts, camshafts, etc. Machine table: - Swivable right/left: 6° each - Clamping surface (workpiece): 1240 x 156 mm Grinding spindle stock: - Spindle stock adjustment 150 mm towards workpiece axis - Swivable right/left 90° in two planes - Manual infeed, hand-operated, 280 mm - Grinding wheel/specimen: 350 x 32 x 127 mm Internal grinding spindle type Fortuna SJ 60 x 250L Workpiece spindle stock: - Speeds: 25 - 65 - 155 - 400 rpm - Swivable manually, +/- 90° Nodpju Ng Dtsfx Abiowl - Centre height: 130 mm Equipment: Tailstock fitted with dressing device, rapid clamping quill with centre Machine can be demonstrated on request.

Stanje: rabljeno, Tehnične podrobnosti: Premer brusilnega diska: 160 mm Premer krožne žage: 315 mm Skupna potrebna moč: 1,2 kW Napetost priklopa: 380 V Nadzorna napetost: 220 V Nazivni tok: 4,6 A Nwodpjz E Hdhjfx Abiel Masa stroja: približno 370 kg Ostrjenje/ponovno brušenje krožnih žaginih listov oziroma žaginih rezal * za ostrjenje krožnih rezal s 20 ali več zobmi

Stanje: rabljeno, Bütfering ECO 111 Electronic Avtomatski tračni stroj za kalibracijo in fino brušenje Kontaktni valj 85 SH CPS elektronsko krmiljena segmentna brusilna čevelj Delovna širina 1100 mm Terminal za različne delovne programe s stikalom in LED prikazovalnikom Moč motorja cca 11 kW Enota za čiščenje s ščetkami RTE dodatna kompaktna valjčna miza pri vstopu Nedpfx Absy Rzf Ajiewl RTA dodatna kompaktna valjčna miza pri izstopu Stroj je DELAVNIŠKO OBNOVLJEN v VRHUNSKEM STANJU Na zalogi Lieboch

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Holz Her Auriga 1308 XL FÜ + PU kompaktna izvedba – debelina robov 0,4 – 8 mm Nodpozib Niefx Abiswl SPS-zaslonsko krmiljenje Edge-Control PPC 231 z zaslonom na dotik motorizirano, pozicijsko vodeno nastavljanje višine mostu Predrezalna enota za obdelavo pred lepljenjem Popolnoma avtomatski podajalnik robnih trakov za rolo in trakove Enota za nanašanje lepila GLU JET kartuše + PU lepljenje Nanos lepila preko šobne tehnologije Višina obdelovanca 6–60 mm avtomatska nastavitev višine nanosa lepila Stiskalna enota 1912-3 pnevmatska Odskočna enota 1918 pnevmatska za rolo in trakove do 8 mm debeline robu s pnevmatskim nastavljanjem kota žaganja 0–10° Rezkalna enota 1827 MOT 4, rezkanje v ravnini 8 mm, radijsko rezkanje – posnemanje robov pod kotom 15° MOT NC-osi preko upravljalne plošče Profilna rezkalna enota 1832 pnevmatska, zaobljanje vogalov do debeline roba 3 mm v prehodu Strgalo 1929 MOT2 za posname in radije z 2 držaloma strgala, NC-osi preko upravljalne plošče Ploščata strgala – zaključna obdelava Polirna enota – poliranje Razpršilna naprava pri vstopu in izstopu popolna oprema orodij vključena Prva dostava 2013 Stroj je FUNKCIJSKO PREVERJEN in v ODLIČNEM STANJU na zalogi Lieboch

Stanje: rabljeno, Holz Her Sprint 1321 FÜ + PU močna izvedba – debelina robov 0,4 – 15 mm SPS-upravljalni sistem na zaslonu Edgecontrol motorizirana, na položaj usmerjena nastavitev višine prečnega nosilca predrezalna enota za namestitev pred lepilno postajo avtomatski podajalnik robov za valjasto in trakasto obdelo postaja za nanašanje lepila – kartuše + PU-lepljenje avtomatska nastavitev višine nanosa lepila / tipna šoba pritiskalna enota 1913 – pnevmatska rezalna enota za valjasto in trakasto obdelo 1918 – 15 mm z pnevmatskim nastavljanjem kota rezalne žage od 0 do 10° multifunkcijna rezalna enota z motoriziranim nastavljanjem: obrezovanje v ravnini – 15 mm, obdelava robov in faz – 15° predrezalna enota – zaobljanje vogalov 1833 enota za glajenje za obdelavo robov in faz 1929 – pnevmatska pnevmatski vklop in izklop Nsdpezp Hc Uofx Abiswl enota za glajenje površin – končna obdelava – pnevmatska enota za poliranje za dokončno obdelavo in poliranje robov z 2 tekstilnimi diski VRHUNSKA brizgalna naprava popolna oprema z orodjem stroj je FUNKCIONALEN stroj iz obrtnega podjetja / posredniška prodaja na voljo v skladišču Lieboch, NETO cena: 21.500,00 €

Stanje: rabljeno, Holz Her Sprint 1312 FÜ + PU močna izvedba – debelina robov 0,4 - 12 mm SPS zaslonsko upravljanje Predrezkalna enota za pripravo pred lepljenjem Nsdpfx Aox Eilqsbiswl Popolnoma avtomatski podajalnik robnega materiala za rolo in trak Lepilna postaja za kartuše + PU-lepljenje samodejna testna šoba Višina obdelovanca 6-55 mm Kap enota za rolo in trak do 12 mm debeline robu z nastavljivim naklonom kap žage od 0-10° Rezkalna enota, poravnava do 12 mm, rezkanje radijev – fazno rezkanje – 15° MOT – 4 osi Strgalska enota za faze in radije z 2 pnevmatskima nosilcema strgal pnevmatsko vklapljanje in izklapljanje Površinska strgalska enota – finish Sistem za pršenje – PU Stroj v ODLIČNEM STANJU iz zaloge Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Nedst Dx U Sjpfx Abiowl Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Nwodpsx Ah A Ajfx Abijl Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Multi-combination machine with aluminium sliding table for sawing, milling, surface/thickness planing and optional slot mortising Torsion-resistant steel/cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodised aluminium sliding table, 10-year SCM warranty on sliding table guides Large crosscut frame with extendable aluminium telescopic fence and fold-away stops With combination saw/miter fence with 45° quick adjustment Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° Helically geared steel infeed roller for consistent wood feed during thickness planing Four spindle speeds, manually adjustable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Equipped with a proven ball contact system, used millions of times Permanently smooth operation due to hardened and ground guides Not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The extraction ports for surfacing and thickness planing are on the same (right) side. The extraction hose can therefore be used from the same side for both planing modes. Helically geared steel infeed rollers for constant and uniform workpiece feed Massive anti-kickback devices for operator safety 3-knife cutter block for optimal planing results Nwsdjiiyppepfx Abisl Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of the saw blade: 1660 mm Cutting width at rip fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. Table dimensions: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. material removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. tool diameter retractable: 180 mm Spindle speeds: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Extraction port Ø saw blade guard: 60 mm Weight: 430 kg OPTIONS: - Professional fences: EUR 300 Saw fence with quick locking and micrometric adjustment Planer fence 90° ÷ 45°, continuously adjustable - Scoring unit incl. saw blade: EUR 292 - Handwheel with digital readout for thickness table positioning: EUR 129 - Mobility kit: EUR 119 - 2 additional handwheels for aggregate adjustment: EUR 45 - TERSA cutter block, Ø 72 mm: EUR 212 - Xylent spiral cutterhead, 3 rows of knives: EUR 717 - Aluminium slot mortising unit: EUR 390 - 2 stop flaps for crosscut fence: EUR 150

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Nwodpfoc S Di Rjx Abiol Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Debelina robov: 0,2 – 12 mm Dimenzije obdelovanca: Širina min. 70 mm Višina min./maks. 8 / 42 mm Dolžina min. 160 mm (robovi v trakovih) Dolžina min. 60 mm (z role) Hitrost podajanja: 12 m/min Valj za nanašanje lepila Višina delovne površine: 880 mm Stisnjen zrak: 6 bar, 1/4 palca Priključek za odsesavanje: premer 160 mm Dimenzije stroja (D x Š x V): 5600 x 950 x 1300 mm Teža: pribl. 2200 kg Priključna moč: pribl. 11,5 kW, 400 V, 50 Hz Oprema: - Dvojni pritisk z električno nastavitvijo višine - Avtomatski hranilnik za robove z role, do premera 800 mm - Pnevmatične škarje za robove v trakovih, do debeline 3 mm - Avtomatska vodilna letev Predrezalna enota z 2 visokofrekvenčnimi motorji, 1,5 kW, 12.000 vrt/min Dvojna krožna žaga - 2 visokofrekvenčna motorja, 0,2 kW, 12.000 vrt/min 2 avtomatska položaja = 0 + 3 stopinje Enota za obdelavo robov z 2 visokofrekvenčnimi motorji, 0,7 kW, 12.000 vrt/min Enota za obdelavo ukrivljenih robov - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min Enota za zaokroževanje robov AR2 Nsdpfshy Tlrex Abiewl - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min, dvostopenjska, dotikalna Strgalna plošča Opomba o rabljenih strojih: • Pridržujemo si pravico do sprememb tehničnih podatkov in prodaje. • Navedene cene so cene ob prevzemu na našem lokalu – brezplačno natovarjanje! • Stroj je očiščen in preizkušen. • Vsi stroji se prodajajo v stanju, v katerem so, brez kakršnih koli jamstev. • Kupec ima možnost, da stroj pregleda na našem lokalu. • Posebni dogovori so možni le v pisni obliki. (Na povpraševanja bomo odgovorili le, če boste navedli svoj naslov in telefonsko številko!)

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is built in accordance with CE standards. Nwjdpjdcdwbsfx Abiel Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Njdpfxjg Nn E No Abiewl Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! Njdpedd Hi Eofx Abijwl • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1978, Technical Details: Drilling capacity in steel (diameter): 100 mm Throat depth: 400 - 2100 mm Vertical boom adjustment: 100 mm Spindle taper: MK 50 Drilling depth: 415 mm Spindle stroke: 400 (scale) mm Column rotatable: 360° Column diameter: Ø 500 mm Distance spindle head – clamping surface min./max.: 400 / 1,800 mm Spindle speed range: 12.5 ... 1,600 / 15 steps rpm Feed: 0.063 ... 2.5 / 15 steps mm/rev Table clamping surface (L x W): 2,000 x 950 mm Total power requirement: approx. 35 kW Approx. machine weight without cube: 8.0 t Machine dimensions approx. (LxWxH): 3.40 x 1.16 x 3.51 m Additional information: - Spindle horizontal travel: 1,700 mm Nsdpfeu Id Awsx Abiewl Equipment: - Incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, center bore Ø 35 mm; 6 T-slots), (vertical surface: 1,000 x 500 mm, 3 T-slots) - Control panel - Coolant system

Stanje: novo, This is a new machine manufactured in Romania by the company Emsil. Customer-specific requirements can be accommodated, depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering department. About the spindles: The Narwhal is equipped with a boring spindle made from hardened, tempered, and alloyed steel. It features preloaded angular contact precision ball bearings. Additionally, the machine is fitted with a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and also utilizes preloaded angular contact precision ball bearings. Its movement occurs on bronze guide bushings. Both unit clamping mechanisms, responsible for securing and releasing the ISO 50 tool holder taper, operate fully automatically. Rotary Table: Table rotation is achieved via a twin pinion gearbox, a centrally supported shaft, and a hydrostatic sliding block for the central bearing, all engineered to guarantee maximum precision even with heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes feature a direct measuring system. Nwodpfxeu Id H Ao Abiol CNC Axis Control: All nine axes of the machine are permanently monitored. The monitoring system includes a 15'' TFT screen, operator panel, remote diagnostics which alerts the user in case of any errors, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, Siemens, etc. You select the sizes for the machining X/Y and Z axes: from 1200–3500 / 1000–3500 / 400–1500 mm as required! Best regards.

Stanje: rabljeno, Leto izdelave: 1984, Technical Details: X-travel: 950 mm Y-travel: 255 mm Z-travel: 250 mm Spindle taper ISO: 40 / MK 4 Speed range: 45 - 2,000 rpm / 12 steps Swiveling spindle head +/-: 90° vertical = 90° right/left Swiveling spindle head +/-: 45° vertical = 90° right/left Feed (table): Table feed X/Y: 16 - 132 mm/min Feed (table): Table feed Z: 8 - 66 mm/min Clamping table: 1,200 x 300 mm Total power requirement: 5.4 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 1.6 x 2.0 x 2.0 m The spindle head is swivelable. Equipment: - Equipped with coolant system Njdpfsu Ndcyex Abiowl - Equipped with coolant collection tray Accessories: various milling cutters and arbors (see comparable items in photo)