Rezkalni stroj - univerzalni

Wilhelm Grupp UF 20

Leto izdelave: 1981, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240 rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Supplied only with counter bearing for arbor, keys, and hobbing arbors. The machine has bearing noise and play on the X-axis. Documentation available. On-site inspection possible. Codow Edptspfx Ahxerb

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm Crjdpferqwbiox Ahxjb ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Manufacturer: Walter Cjdpfx Aodx D Tvjhxorb Weight: 9.5 kg

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Y travel: 370 mm Z travel: 300 mm Codpfx Aheqgcdtjxerb Table: 960 x 380 mm Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Tlačna sila: 300 ton Dimenzije mize: 1.200 x 850 mm Prostornina: 400 mm Širina bata: 1.100 mm Odprtina v mizi: 400 x 250 mm Vgradna višina: 500 mm Število hodov: 32 1/min Hod: 30 - 140 mm Nastavitev bata: 105 mm Teža: pribl. 19.500 kg Ostalo - Dovoljeno za ročno polaganje delov - Opremljeno z varnostnim ventilom Herion Xsz 20 - Motorizirano centralno mazanje z mastjo - Pnevmatski batni cilindri za kompenzacijo teže - Motorizirano nastavljanje bata - T-utorji v batu - Samostoječa upravljalna konzola Cjdpfx Ahsd A Hbcsxjrb - Ležaji ojnic obnovljeni Zaščitni pokrovi za predkolo so seveda vključeni – glejte drugo fotografijo.

Leto izdelave: 1967, stanje: dober (rabljeno), številka stroja/vozila: 7011/C, Table clamping surface: 310 x 1400 mm Table travel (X-axis): approx. 950 mm Table travel (Y-axis): 325/345 mm Table travel (Z-axis): approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds, longitudinal and cross: 18 - 620 mm/min Feeds, vertical: 18 - 620 mm/min Electrical connection: 380 V, kW Cedpfx Aod Rxw Hshxsrb Required space: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Crsdpfohmvawsx Ahxjb Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg

Stanje: novo, Tlak 60 t Hod 400 mm Prehod med stebri vzdolž/bočno 820 x 300 mm Vgradna višina 900 mm Prostornina rezervoarja 6,5 l Hitrost dol 6,1 mm/s Hitrost gor 10 mm/s Moč motorja 2,2 kW Credpfegg Nn Sox Ahxob Teža stroja cca 0,675 t Dimenzije cca 1,46 x 0,85 x 2,1 m Visokokakovostna hidravlična stiskalnica, ki jo je mogoče upravljati ročno ali motorno. Valje je mogoče premikati bočno. Varnostni ventil na končnem položaju valja. CE oznaka.

Stanje: rabljeno, skupna višina: 2.000 mm, skupna širina: 2.300 mm, skupna dolžina: 3.000 mm, Poids à vide : 3 200 kg - Documentation disponible : Non - Certificat CE disponible : Non - Commande : conventionnelle - Nombre d'axes [pcs] : 3 - Course axe X [mm] : 800 - Course axe Y [mm] : 450 Crjdpfownif Sox Ahxeb - Course axe Z [mm] : 500 - Longueur de table [mm] : 1 050 - Largeur de table [mm] : 625 - Porte-outil : ISO40 - Vitesse de rotation mini de la broche [tr/min] : 32 - Vitesse de rotation maxi de la broche [tr/min] : 1600 - Options : Affichage digital - └ Type d'affichage digital : Heidenhain - Dimensions de transport : 3 000 mm x 2 300 mm x 2 000 mm (L x l x H) - Poids de transport [kg] : 3 200 kg - Nombre de colis pour le transport [pcs] : 1 Informations financières : TVA : Le prix indiqué s'entend TVA en sus TVA/régime de la marge : TVA récupérable pour les entreprises Livraison et reprise possibles à tout moment pour tout matériel industriel. Lukas van Rossum

Stanje: rabljeno, x-travel 800 mm y-travel 400 mm z-travel 300 mm Heidenhain digital readout Clamping table size 1000 x 520 mm Crodpsqpl Uuefx Ahxjb Spindle speed range 40 – 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Space requirements approx. 1700 x 1600 x 1800 mm Deckel FP 2 B – slant-bed, travelling column design Universal swivel-tilt table Including various SK40 tool holders, draw thread S20x2 Collet chuck The machine was overhauled for approx. €24,000.00