Ploščato Jeklo Škarje nakup rabljenega (2.403)

Stanje: rabljeno, Manual lever shear VEB Scherenbau Nossen Type ScDH10 Blade length: 180 mm Sheet thickness: max. 10 mm Flat material: 50x15 mm Square solid material: 22x22 mm Round steel: 24 mm Angle steel: 60x7 mm Knjdpfx Ahjuqrabsvod T-section steel: 60x7 mm on mobile base frame Net weight: approx. 150 kg

Stanje: novo, Dimensions (LxWxH): 2730x1150x2280 mm Approximate weight: 6000 kg Total power requirement: 11 kW Square steel: 55 mm Round steel: 65 mm Punching force: 175 kN Throat depth: 625 mm Flat bar shear: 380x30 mm or 600x20 mm Notching (Thickness x Width x Depth): 16x60x100 mm Punching – Round: 40x32 mm or 57x22 mm or 125x5 mm Angle steel cutting at 90° or 45°: 200x200x20 mm or 80x10 mm - 5 workstations - with 1 foot pedal Ksdoh Hvnmopfx Ahvjnd - hydraulic drive - table at the punching station and notching station with stop - operating manual in GERMAN and ENGLISH We have many references!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, in the following configuration: - GEKA punch holder No. 8-31 and 8-40 with quick-change system - GEKA die holder No. 8 and No. 5 - Support table at the punching station with stops - Support table at the flat bar station with stops - Selector switch for setup and operation modes - 1 foot pedal - Including accessories (punches and dies) - Technical documentation - CE compliant version Technical data: Punching unit: Punching force: 40 tons Knsdsxu Ugxspfx Ahvod Throat depth: 175 mm Stroke: 50 mm Strokes per minute (at 20 mm stroke): 20 pcs. Max. sheet thickness Ø: 20 x 15 mm Working height: 970 mm Flat bar shear: Cutting capacity: 300 x 6 / 200 x 13 mm Angle steel 45° (one leg): 50 x 50 x 6 mm Angle steel 90°: 80 x 80 x 8 mm Blade length: 356 mm Working height: 980 mm Bar and angle steel shear: Angle steel 90°: 80 x 80 x 8 mm Round: 30 mm Square: 25 mm Working height: 1,110 mm General: Motor power: 3 kW Voltage: 400 V / 50 Hz Dimensions: Width: 800 mm Depth: 1,100 mm Height: 1,520 mm Weight approx.: 580 kg The stated performances relate to steel with R = 45 kg/mm²

Stanje: zelo dobro (rabljeno), Maks. prebijalna sila 600 kN Delovni tlak 250 bar Kotnik 90° 130x12 mm Premer in debelina luknje 31x15 mm Kjdpfx Aoxwpkdohvend Teža 1930 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1993, številka stroja/vozila: 4422559493014, Oprema: CE označba, Peddimax 600 Oprema - Škarje za ploščati, profilni in palčni material - Kotni izsekovalnik in luknjač 600 kN - Mehansko nastavljiv pritiskalni element za profile in ploščato jeklo - Naprava za hitro menjavo štance Miza za štancanje - Univerzalno sedlo za štancanje - Miza za odlaganje materiala pri izsekavanju kotov Knodpfjrknnfox Ahvjd - Različne štance in matrice

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1978, Oprema: nožno daljinsko upravljanje, Données techniques : Cisaille à profilés : • Fer en L, coupe à 90° : 80 x 8 mm • Fer en L, coupe à 45° : 50 x 6 mm Lames pour profilés : • Fer en L, coupe à 90° : 60 x 6 mm • Fer en T, coupe à 90° : 60 x 7 mm • L + T, coupe à 45° : 50 x 6 mm Lames spéciales : • Fer en U : 80 mm • Fer en I : 100 mm • Plat : 80 x 12 / 120 x 8 mm Cisaille à rond : • Rond : 28 mm • Carré : 25 x 25 mm Cisaille à plat : 100 x 11 / 10 mm Cisaille d'encochage en V : 8 mm Cps/min : 36 Moteur : 2,2 kW Knsdpfx Ashx Ekpshvjd Poids : env. 450 kg Inclut le châssis comme sur la photo. Toutes informations sans garantie. Sous réserve de vente préalable. L’objet est vendu sans aucune garantie. L’exclusion ne s’applique pas aux demandes de dommages et intérêts pour faute intentionnelle ou négligence grave du vendeur ou en cas d’atteinte à la vie, à l’intégrité physique ou à la santé.

Stanje: rabljeno, Leto izdelave: 2010, Okrogla jekla 32 mm Kvadratna jekla 30 mm Kotna jekla 100 x 8 mm Kjdpoxu Nrvsfx Ahvond Debelina pločevine 10 mm Ravna jekla 350 x 13 mm Dolžina rezila 370 mm T - jeklo - pas navzven 100 x 8 mm Izsekovalec: iztegnjenost 203 mm Tlačna moč 50 t Premer lukenj v debelini pločevine 31 pri 12 mm Pogonska moč 4 kW Teža stroja cca 0,9 t Prostorska zahteva cca 1 x 0,7 x 1,7 m 5-kratno kombiniran hidravlični stroj, opremljen s pločevinskimi škarjami, škarjami za profilno jeklo, škarjami za palice, izsekovalcem in izrezovalnikom.

Stanje: novo, Dimensions (LxWxH): 2040 x 950 x 2180 mm Approx. weight: 2,940 kg Total power requirement: 11 kW Square steel: 50 mm Throat: 355 mm Round steel: 55 mm Flat bar shear: 380 x 25 mm Notching (thickness x width x depth): 13 x 60 x 100 mm Punching – Round: 34 x 26 mm or 55 x 16 mm or 110 x 5 mm Angle steel cutting 90° or 45°: 150 x 150 x 16 mm or 80 x 10 mm Pressure: 115 t With two cylinders, hydraulic 5 Workstations: - Punching station - Notching station, as well as flat bar, bar, and angle steel cutting stations Includes the following features: - With two hydraulic cylinders - Support table at the notching and flat bar stations with stops Kodoh Hvniopfx Ahvend - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat bar station with stops - 1,000 mm electric length stop for automatic cutting activation - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE compliant PROPERTY DESCRIPTION / VALUE Model: HKM 115 Punching force: 115 t Throat: 355 mm Stroke: 80 mm Strokes per min. (at 20 mm stroke): 25 Max. plate thickness: Ø 34 x 26 mm Working height: 935 mm Shearing capacity: 600 x 15 mm; 380 x 25 mm Angle steel 45° (single leg): 80 x 80 x 10 mm Angle steel 90°: 150 x 150 x 16 mm Blade length: 610 mm Round: 55 mm Square: 50 mm Material thickness: 13 mm Width: 2,040 mm Depth: 950 mm Motor power: 11.0 kW Network voltage: 400 V / 50 Hz Height: 2,180 mm Weight: 2,920 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, Punching machine, 700 kN, throat depth 510 mm, punches 30 mm diameter holes in material up to 20 mm thick. Flat bar shear: 500 x 18 mm. Notching attachment with rectangular tool up to 13 mm. Section steel shear, for angle steel, 90°. Knodpfx Ahjxtqu Novjd - Machine in good original condition! Includes approx. 70 sets of punching tools.

Stanje: dober (rabljeno), Profile steel shear, profile shear, punching machine, punching press, hole punch, ch/b steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HPSN 350 -Drive: hydraulic -Punching force: 35 t -Equipment: large support table with stops for punching -Punching -Shearing Knodpsfndy Njfx Ahvod -Cutting -Notching -Various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080 kg

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: 4073756691005, Ponudba 25360 Tehnični podatki: - Škarje za pločevino in plosko jeklo, dolžina rezila 175 mm - Reže plosko jeklo do 100 x 15 mm ali do 150 x 10 mm - Škarje za profilno in palico - Reže kotno jeklo do 80 x 8 mm - Okroglo jeklo do 32 mm Kjdexupvbepfx Ahvsnd - Kvadratno jeklo do 30 mm - Prebijalni stroj - Prebijalna sila 360 KN - Hod 10 do 32 mm - Izročnik 155 mm - Prebija v jeklo do 20 mm Ø v 14 mm ali do 27 mm Ø v 10 mm - Pogon 400 V / 3 kW - Nožni pedal - Potrebna površina pribl. Š 800 x V 1600 x G 855 mm - Teža pribl. 600 kg - Različne prebijalne matrice in kalupi

Stanje: rabljeno, Profilne škarje za jeklo z izsekovalno enoto Idealne za gradbišče, saj so mobilne; seveda primerne tudi za notranjo uporabo Peddinghaus 13 RP / 10 Kotna profilna: 60x7mm T-profil: 60x7mm Polni kvadrat: 20x20mm Okrogla: 22mm Ploska: 90x14mm Vzvodne škarje: Tmax: 10mm Prevzem: 28755 Bremen Knsdpfew Ip D Hox Ahvsd _____ Veljajo naši splošni pogoji, prodajalec ne odgovarja za napake pri pisanju ali prenosu podatkov. Videz ponujenih artiklov ustreza starosti in prikazanim slikam. Tehnično stanje in obraba artiklov ustrezata njihovi starosti. Rabljeni stroji se prodajajo izključno podjetjem in brez garancije.

Stanje: rabljeno, Leto izdelave: 2009, Condition: Used Year of manufacture: 2009 Stock number: 9725 Delivery: Prompt, subject to prior sale Country of origin: Spain Price: €14,700 In stock: 1 Punching force: 110 t Throat depth: 300 mm Number of stations: 5 Cylinders: 2 Max. diameter at sheet thickness (mild steel): 40x20 mm (28x28 mm) Stroke: 80 mm Strokes per minute: 17 1/min Flat steel: 600x15 mm (400x20 mm) Blade length: 605 mm Angle steel: 152x152x13 mm Round/square steel: 50/50 mm Notching station: 90x52x13 mm Motor: 5 kW Length: 2,130 mm Width: 1,200 mm Height: 2,200 mm Weight: 2,500 kg 2 foot pedals for independent operation at 2 stations Hydraulic drive Flat bar shear with hydraulic hold-down Angle iron shear with minimal distortion due to diagonal blade movement, with hydraulic hold-down Kodpfx Aowiq D Eehvjnd Round and square bar shear Rectangular notcher Punching unit up to Ø 40 mm Oil filled Table with back gauge at punch station Table with back gauge at notching station Table at flat bar shear

Stanje: novo, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 10 mm Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station Knodpfx Aottc Utehvjd - CE-compliant design SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stanje: rabljeno, Prebijalna sila: 350 kN (luknja npr. 23 mm v 12 mm materialu) Reže 150 x 10 mm na škarjah za ploščato jeklo Dva ločena nožna stikala za prebijalno in rezalno stran, kar omogoča neodvisno prebijanje in rezanje Namizna podlaga na prebijalni strani z ustavljalnim zatičem. Sortiment orodja je vključen v ceno Knodoxqqphopfx Ahvsd

Leto izdelave: 2023, Stanje: novo, Rebar Shear Round Bar Shear Model C 38 E - Capacity up to 30 mm round at 65 kg/mm² - Weight: 242 kg Kedpoi Ek Tkefx Ahvjnd - 400 Volt, 50 Hz, 3-phase - Motor: 3 kW - Mobile on wheels - Hardened blades - Adjustment screw for precise material alignment

Stanje: rabljeno, Leto izdelave: 2005, Round steel 32 / 17 mm Square steel 30 x 18 mm Angle steel 100 x 8 mm Punching force 50 t Machine weight approx. 900 kg Space requirement approx. 1000 x 700 x 1700 mm Equipment: - Flat bar shear cuts flat steel: up to 350 x 13 mm Angle steel, 45° cut: up to 100 x 8 mm Blade cutting length: 370 mm Working height: 734 mm - Profile and bar shear Shear cross-section: max. 1550 mm² Stroke, infinitely adjustable: 10 - 36 mm - shears with standard blade 90° Angle steel 90° cut: up to 100 x 8 mm Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-section steel, 90° cut: up to 100 mm Double-T beam (IPE/HEB), 90° cut: up to 100 mm Kedpfx Ajwu Hkfohvsnd Working height (centre of blade cross): 1044 mm - Notching unit with square notcher U-section steel, in flange: 80 - 120 mm Double-T beam, in flange: 80 - 120 mm Notch width: 44.5 mm Notch depth: 50.0 mm Working height: 1000 mm - Punching station Number of strokes of punch at 28 mm stroke: 12 min⁻¹ Number of strokes of punch at 20 mm stroke: 17 min⁻¹ Number of strokes of punch at 15 mm stroke: 21 min⁻¹ Stroke, infinitely adjustable: 10 - 36 mm Punching force: 500 kN Working height: 1000 mm Sheets: up to 10 mm Angle steel: up to 55 x 10 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1987, Prebijalni in profilni škarje za jeklo Proizvajalec: Peddinghaus Tip: Peddimaster 40/60H Leto izdelave: 1987 Tehnični podatki Proizvajalec: Peddinghaus Tip: Peddimaster 40/60 H Leto izdelave: 1987 Škarjna sila: 60 t Prebijalna sila: 40 t Profilne škarje za jeklo L- in T-profil pri 90° 100 x 10 mm pri 45° 65 x 8 mm Izrezovalna enota s kvadratnim izrezovalnikom za pločevino do 10 mm Škarje za ploščato jeklo 380 x 8 mm ali 150 x 14 mm Knsdpfjxp Ndhox Ahvjd Teža: pribl. 1,5 t Dimenzije: pribl. 1,7 x 1,05 x 1,98 m Oprema - električni končni omejevalnik 3000 mm - delovna miza z omejevalnikom - nastavljiv pritiskalnik - velik paket orodja glede na fotografije Vse navedene informacije so brez garancije. Demonstracija je možna kadarkoli v našem razstavnem prostoru.

Stanje: dober (rabljeno), prebijalna sila: 45 t, - Kapaciteta 45 ton - Hidravlična - 4 postaje - Nadzor s stopalko - Nujna zaustavitev Knedpfx Ahou Havwevjd - 400V

Stanje: novo, Dimensions (LxWxH): 1500 x 950 x 1680 mm Weight approx.: 1,165 kg Total power requirement: 4 kW Square steel: 25 mm Round steel: 30 mm Punching force: 45 t Throat depth: 220 mm Flat bar shear: 200 x 15 mm or 300 x 12 mm Notching (thickness x width x depth): 8 x 35 x 75 mm Punching - round: 22 x 15 mm or 38 x 8 mm or 100 x 3 mm Angle steel cutting 90° or 45°: 100 x 100 x 10 mm or 70 x 6 mm - Single cylinder model - 5 workstations: punching, notching, flat, bar, and angle steel cutting stations. Features: - Hydraulic and electrical components from renowned manufacturers - Foot pedal Knedpfxod Ab Hze Ahvjd - CE-compliant version - Technical documentation - Selector switch for setup and operating mode - Support table with stops at notching and flat bar station - Support table with stops at the punching station Punching force: 45 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Flat bar shear cutting capacity: 300 x 12 mm / 200 x 15 mm Angle steel 45° (single leg): 70 x 70 x 6 mm Angle steel 90°: 100 x 100 x 10 mm Blade length: 316 mm Round: 30 mm Square: 25 mm Material thickness: 8 mm Width: 1,430 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V / 50 Hz Height: 1,680 mm Weight: 1,165 kg

Stanje: novo, Leto izdelave: 2025, Stanje: novo Godina proizvodnje: 2025 Broj lagera: 090054 Rok isporuke: odmah, prodaja podložna prethodnoj prodaji Zemlja porekla: Španija Cena: 17.300 € Leasing rata: 332,16 € Na lageru: 1 kom Sila probijanja: 55 t Dubina grla: 250 mm Broj stanica: 5 Maks. prečnik kod debljine lima (konstrukcioni čelik): 40/10 mm Hod: 20 mm Broj hodova: 37/min Ravni čelik: 300x15 mm Ugaoni čelik: 120x10 mm Okrugli/kvadratni čelik: 40 mm Izrezivač: 10 mm Motor: 5 kW Dužina: 1670 mm Širina: 1160 mm Visina: 2090 mm Težina: 1.390 kg 2 nožna prekidača za nezavisni rad na 2 stanice Makaza za ravni čelik Makaza za ugaoni čelik Makaza za okrugli i kvadratni čelik Pravougla izrezivač Probijalica rupa Sto na makazi za ravni čelik Sto na stanici za probijanje rupa Sto na izrezivačkoj stanici Ulje uključeno Uputstvo za rad na NEMAČKOM i ENGLESKOM jeziku Kedpewirxwsfx Ahvsnd OPCIJA: Set: 970,00 € sastoji se od: Graničnik dužine 1000 mm sa električnim kontaktom za ravni, ugaoni ili okrugli čelik Magnetna mašinska lampa 10 kompleta okruglih probijača i matrica: 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm

Stanje: rabljeno, Leto izdelave: 1991, Round steel 35 mm Square steel 32 mm Angle steel 120 x 12 mm Flat steel 400 x 16 / 200 x 20 mm Punching force 60 t Stroke 10 - 27.5 mm Knodpfxjv Hti To Ahvsd Throat depth 410 mm Punching diameter 27 in 17 mm Total power requirement 7.5 kW Machine weight approx. 2000 kg Space requirement approx. 1800 x 800 x 1800 mm Equipment: - Notching unit, punching unit, flat bar shear, angle steel shear - Stop table for punching and notching unit - Length stop 1000 mm - 2x foot pedals - Operating manual

Stanje: novo, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - Equipped with one cylinder - 5 workstations: Punching, notching station, as well as flat, bar, and angle steel shear stations. Equipped with: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1,000 mm for automatic cut triggering - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant FEATURE DESCRIPTION / VALUE Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (with 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (1 leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Kedpottc Upjfx Ahvend Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stanje: zelo dobro (rabljeno), Luknjači stiskalnica: Tlačna zmogljivost 100 t Zmogljivost 40 v 22 mm Kotnik 160 x 16,0 mm Kvadratno železo 50,0 mm Okroglo železo 50,0 mm Ploščato železo 600 x 15,0 / 400 x 20,0 mm Izvlek 610 mm Moč motorja 8,5 kW Teža stroja ca. 3150 kg Dimenzije D-Š-V ca. 2200 x 1400 x 1830 mm Oprema: - robustne elektro-hidravlične škarje za profile - luknjaška postaja s hitromenjalno napravo za matrice in držalom za matrico - vključno z veliko odlagalno mizo s pomičnim omejilcem - brezstopenjska nastavitev hoda s tipnim/ureditvenim načinom - postaja za izsekavanje trikotnikov z odlagalno mizo - škarje za palice, profile in kotnike - postaja za ploščato železo z odlagalno in vodilno mizo Knodjxn Tydepfx Ahved - različni štanci in matrice (predalna omara) - 1x električna kontaktna merilna letev - 2x prosto pomični nožni stikali - navodila za uporabo (PDF)

Stanje: novo, Punching force: 85 t Throat depth: 355 mm Stroke: 80 mm Blade length: 482 mm Motor: 7.5 kW Height: 2040 mm Approximate weight: 2,315 kg With two cylinders, hydraulic 5 working stations: punching station, notching station, and flat bar, round bar, and angle bar shearing stations. Execution: - Hydraulic and electrical components from renowned manufacturers - Technical documentation - Support table at the punching station with scales and stops - Support table at the notching and flat bar station with stops - Electric longitudinal stop 1000 mm for automatic cutting activation - Selector switch for setup and operation mode - Lighting Knodpfx Aoh Hrx Ejhved - 2 foot pedals - CE-compliant design FEATURE DESCRIPTION / VALUE Punching force: 85 t Throat depth: 355 mm Stroke: 80 mm Strokes per min. (at 20 mm stroke): 25 Sheet thickness (max.): Ø 33 x 20 mm Working height: 940 mm Shearing capacity: 480 x 15 mm, 380 x 20 mm Angle steel 45° (1 leg): 80 x 80 x 8 mm Angle steel 90°: 150 x 150 x 15 mm Blade length: 482 mm Round: 50 mm Square: 50 mm Material thickness: 13 mm Width: 1,920 mm Depth: 950 mm Motor power: 7.5 kW Power supply: 400 V, 50 Hz Height: 2,040 mm Weight: 2,315 kg