Škarje Vzvoda Roko nakup rabljenega (3.533)

Stanje: rabljeno, Sheet width - max. 170 mm, Sheet thickness - 8 mm, Godpfx Ajc Uqkcsb Tskf Flat steel 80 x 10 mm, Bar steel cutting templates for round bars Ø 20 mm and square bars 20 x 20 mm Blade length 170 mm, Sheet holding device Machine length 800 mm (1000 mm with mobile base frame) Machine height 500 mm plus 560 mm for base frame Machine weight approx. 255 kg, on mobile base frame

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZF1RT2101C4131380, Leto izdelave: 2014, obratovalne ure: 11.800 h, nosilnost: 4.000 kg, dvižna višina: 26.000 mm, lastna masa: 16.050 kg, doseg roke: 22.900 mm, The telescopic handler was serviced three months ago. As part of this maintenance, the slew ring bolts were replaced and both machine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slewing tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system System voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled outriggers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock attachment system Gsdox Dmgvspfx Ab Tjkf Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Note: The winch (€4,000) and the work basket (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Stanje: novo, Stanje: novo Gsdpfxjwirf Re Ab Tekf Dobavni rok: cca 8 tednov po naročilu Država izvora: Španija Cena: 24.200 € Leasing obrok: 464,64 € Sila izseka: 80 t Razpon: 750 mm Maks. premer pri debelini pločevine (konstrukcijsko jeklo): 40x14 mm Maks. št. hodov pri hodu 20 mm: 40 1/min Motor: 9 kW Dolžina: 1700 mm Širina: 1300 mm Višina: 2050 mm Teža: 1715 kg Hidravlični pogon Podporna miza z omejevalom Navodila za uporabo v NEMŠČINI in ANGLEŠČINI CNC možnosti na zahtevo Na zalogi imamo širok izbor štanc in matric za takojšnjo uporabo IMAMO VEČ KOT 700 REFERENC!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Capacity 1000 x 3.5 mm; light barrier, - electric foot switch - left side stop 600 mm, two support arms each 600 mm Gkjdpfx Ajx Hqursb Tef - centralized lubrication - Ortlinghaus brake-clutch combination - switchable between upholding mode or tilting roller table.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, MOSER Hydraulic Guillotine Shear Model: HGL 3106 Stock Machine Serial No.: 30603 Year of manufacture: 104/2024 Equipped as follows: Gjdpfx Abjxgtq Ts Tjkf - Swing-beam shear design - Upper blade: double-edged - Lower blade: four cutting edges - Designed for single and continuous stroke operation - Motorized blade gap adjustment - Motorized back gauge, 750 mm, with ball screw spindles, foldable, position-controlled via NC controller, CYBELEC, Model: CybTouch 8 W - Fixed angle gauge with scale and fold-down stop cam - Worktable with support plates and integrated balls - Front support arms (2 pcs) - Finger guard with light barrier - Lateral and rear safety covers - Cutting line illumination - Technical documentation - CE compliant - Paint colors: * RAL 7015 – Slate Grey * RAL 7035 – Light Grey * RAL 3003 – Ruby Red Technical Data: Sheet thickness ≤ 450 N/mm²: 6 mm Sheet thickness ≤ 700 N/mm²: 4 mm Cutting length: 3,060 mm Cutting angle: 1.6° Main motor: 11 kW Number of hold-down devices: 17 pcs Strokes per minute: 20 Oil tank: 160 liters Usable back gauge range: 750 mm Back gauge drive motor: 0.37 kW Dimensions (L x W x H): 4,000 x 2,200 x 1,700 mm Weight: 5,500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, Funkcionalnost: omejena funkcionalnost, Lokacija: Avstrija Na voljo takoj Gkodpfx Aoxy Hbxjb Tjf

Stanje: novo, Dolžina pločevine: 1360 Debelina pločevine: 3 Standardna oprema: NC krmiljenje Programabilno, motorizirano zadnje vodilo s hodom 750 mm Osvetlitev linije sence 1 omejevalno letvico z mersko lestvico 2 roki za podpiranje pločevine Godpjxx D Efofx Ab Tokf 1 roka za podpiranje pločevine (za modele 1106, 1306, 1505) Zaščita za prste Kroglična transportna pot Enostavna nastavitev razmika rezil s sprednje strani Kroglični vreteno Števec rezov Prenosna nožna pedalka z gumbom za nujno ustavitev Svetlobna zavesa na zadnjih varnostnih napravah

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), - RABLJENA - CNC HIDRAVLIČNA ŠKARJA Z GNANIM ZADNJIM MEJNIKOM DOLŽINA REZA: 3100 mm MAKSIMALNA DEBELINA REZA: 6 mm Godexy Tpcspfx Ab Tokf HOD ZADNJEGA MEJNIKA: 750 mm SPREMEMBA KOTA: 0°30' - 2°30' KRATKONTROLNA ENOTA: ENC1 TASK84 ŠTEVILO NOSILCEV PLOČEVINE: 16 TEŽA: 6700 kg SKUPNE DIMENZIJE: 3290 x 2130 x 1705 mm OPOMBA: NASTAVLJIV KOT REZA; NASTAVLJIVA REŽA REZILA; TRANSPORTER ZA PLOČEVINO

Stanje: novo, Stanje: novo Dobavni rok: približno 8 tednov od naročila Država porekla: Španija Cena: 17.800 € Leasing obrok: 341,76 € Prebijalna sila: 80 t Izrez: 510 mm Maks. premer pri debelini pločevine (konstrukcijsko jeklo): 40x14 mm Maks. število hodov pri 20 mm hodu: 40 1/min Motor: 9 kW Dolžina: 1700 mm Širina: 1300 mm Višina: 2050 mm Teža: 1715 kg Hidravlični pogon Podporna miza z omejevalom Navodila za uporabo v NEMŠČINI in ANGLEŠČINI CNC opcije na zahtevo Imamo obsežno zalogo utiskovalcev in matric, ki so vam na voljo takoj Godpjwirf Djfx Ab Tokf IMAMO VEČ KOT 700 REFERENC!

Stanje: novo, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Data: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Backgauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Touch Gksdpfxsxxd D Uj Ab Tef with backgauge and cutting gap adjustment from the front via control panel Motorized backgauge up to 1,000 mm User-friendly control panel mounted on a swing arm Hydraulic hold-downs positioned close to the cutting line Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Upward-folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Simple blade replacement and regrinding Adjustable cutting length for economical processing Lower blade, reversible 4 times Upper blade, reversible 2 times Qualified after-sales service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stanje: novo, Condition: New Delivery time: approx. 8 weeks from order Country of origin: Spain Price: €19,600 Gedpfxewirgbe Ab Tjkf Leasing rate: €376.32 Punching force: 55 t Throat depth: 500 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/10 mm or 20/20 mm Stroke: 20 mm Strokes per minute: 37 Flat bar: 300x15 / 200x20 mm Notching tool: 10x42x90 mm Motor: 5 kW Length: 2,100 mm Width: 1,160 mm Height: 2,090 mm Weight: 1,750 kg 2 foot switches for independent operation at 2 stations Hydraulic drive Flat bar shear Angle steel shear with minimal distortion due to diagonal blade movement Round and square bar shear Rectangular notcher Punching unit up to max. Ø 40 mm Fast hydraulic system, centre-punch device Oil fill included Table with back gauge at punching station Table with back gauge at notching station Table at flat bar shear Operating manual in GERMAN and ENGLISH OPTION: Kit €970.00 consisting of: 1000 mm length stop with electrical contact release for flat, angle, or bar steel stations Magnetic machine lamp 10 sets of round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm

Stanje: novo, Sheet length: 3060 Sheet thickness: 20.0 Total power requirement: 37 kW Weight approx.: 21,500 kg Dimensions (LxWxH): 3910x3395x2640 mm Our powerful brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 3020 offers everything needed for perfect cutting. CNC swing beam shear by KKI With a robust, durable mechanical and hydraulic system, a precise backgauge with ball screw spindle, and user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, higher sheet thicknesses and longer cutting lengths can be provided on customer request. Dener guillotine shears owe their long service life to their particularly robust, fully welded frame design. The entire machine body, shear beam, and backgauge are resistant to twisting and deformation, ensuring the highest cutting quality. By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and cutting gap. Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 3020 offers everything needed for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Simple operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 3013 offers everything needed for perfect cutting. With our patented blade support system, we can finely adjust and stabilize the upper blade, guaranteeing precisely high-quality cuts. The so-called banana cut is effectively prevented. Technical Data: Sheet thickness: 20 mm Cutting length: 3,060 mm Cutting angle: 0.5 - 3° Number of hold-downs: 16 Backgauge: 1,000 mm via CNC Motor power: 37 kW Cutting speed (0.5 - 3°): 12 - 5 (cuts/min) Throat depth: 350 mm Oil tank: 750 liters Length: 3,910 mm Width: 2,370 / 3,395 mm Height: 2,640 mm Weight: 21,500 kg • Swing beam design • CNC control system - Backgauge - Cutting angle Gedpfx Asd Egqxeb Tjkf - Blade gap - Cutting length • Ball screw spindles for the backgauge • Balls on the table • 1,500 mm side gauge • 2x support arms, 1,000 mm • Cutting line illumination • 1,000 mm foldable finger guard We have numerous references!

Stanje: novo, Stanje: novo Dobavni rok: cca. 8 tednov od naročila Država izvora: Španija Cena: 24.800 € Leasing mesečna rata: 476,16 € Prebijalna sila: 60 t Izmet: 500 mm Število postaj: 5 Valja: 2 Največji premer pri debelini pločevine (konstrukcijsko jeklo): 40x11 mm Število gibov: 32 /min Ploščato jeklo: 350x10 mm Kotno jeklo: 120x10 mm Okrogla/kvadratna palica: 45/40 mm Izsekovalnik: 100x10 mm Upogibna naprava: 150x10 mm Motor: 5,5 kW Dolžina: 2100 mm Širina: 1400 mm Višina: 2060 mm Teža: 1750 kg 5 delovnih postaj Nožni pedal za sprožanje Hidravlični pogon Škarje za ploščato jeklo vključujejo napravo za zmanjšanje deformacije Škarje za kotno železo z odprtino za okroglo in kvadratno palico Trikotni izsekovalnik Luknjač in upogibna naprava za ploščato železo Miza na postaji za ploščato železo in izsekovalnik Navodila za uporabo v NEMŠČINI in ANGLEŠČINI Gjdpfewiq Evox Ab Tjkf

Stanje: novo, Sheet length: 6125 mm Sheet thickness: 16.0 mm Total power requirement: 45 kW Weight approx.: 49,500 kg Dimensions (LxWxH): 7200 x 3700 x 2780 mm Our premium brand KKI CNC GUILLOTINE Shear, swing beam design Model AS 6016 offers everything you need for perfect cutting results. CNC swing beam guillotine shear by KKI Thanks to robust and durable mechanical and hydraulic systems, a precision ball screw backgauge, and user-friendly CNC controls, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Naturally, greater sheet thicknesses and cutting lengths are available on request. The long service life of Dener shears is owed to their especially sturdy construction with a fully welded frame. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, ensuring the highest cutting quality. By entering the sheet thickness and material type, the CNC controller automatically calculates the required cutting angle and blade gap. Our strong brand – KKI CNC GUILLOTINE Shear Swing Beam Design Model AS 6016 provides everything necessary for perfect cuts. Technological Advantages: Gedpfed Ehh Aex Ab Tekf - Fast and precise cuts - Rigid, long-lasting frame construction - Automatic adjustment of blade clearance - User-friendly operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE Shear, swing beam design Model AS 6016 provides everything required for high-quality cutting. With our patented blade support system, we can finely adjust and stabilize the upper blade, ensuring precise, high-quality cuts. Banana-shaped cuts are reliably prevented. Technical Data: Sheet thickness: 16 mm Cutting length: 6,125 mm Cutting angle: 0.5 – 2.5° Number of hold-downs: 31 Backgauge: 1,000 mm (CNC-controlled) Motor power: 45 kW Cutting speed (0.5 – 2.5°): 10–5 cuts/min Throat depth: 350 mm Oil tank: 750 liters Length: 7,200 mm Width: 2,550 / 3,700 mm Height: 2,780 mm Weight: 49,500 kg • Swing beam construction • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw for backgauge • Balls on worktable • 1,500 mm side gauge • 2 support arms, each 1,000 mm • Cutting line illumination • Foldable finger guard up to 1,000 mm Optional pneumatic sheet support, EURO 12,650 We have many references available!

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Gsdewirnxspfx Ab Tokf Stock number: 9734 Delivery time: prompt, intermediate sale possible Country of origin: Spain Price: €22,400 Leasing rate: €430.08 Bestseller: 1 In stock: 1 Punching force: 60 t Throat depth: 250 mm Number of stations: 5 Max. diameter at sheet thickness (structural steel): 40 x 11 mm Strokes per minute: 32 Flat steel: 350 x 15 mm Angle steel: 120 x 10 mm Round/Square steel: 45/40 mm Notching: 10 mm Bending attachment max.: 150 x 10 mm Motor: 5.5 kW Length: 1850 mm Width: 1300 mm Height: 2100 mm Weight: 1390 kg Bending station 5 work stations Flat steel shear with device for reduction of deformation Angle iron shear with round and square bar openings Triangle notcher Punch Bending device for flat iron Table at flat steel station Table at notching station Length stop 1000 mm with electric contact release, for flat, angle and bar steel station Hydraulic drive 2 foot pedals Operating instructions in GERMAN and ENGLISH

Stanje: novo, Leto izdelave: 2025, Stanje: novo Godina proizvodnje: 2025 Broj lagera: 090054 Rok isporuke: odmah, prodaja podložna prethodnoj prodaji Zemlja porekla: Španija Cena: 17.300 € Leasing rata: 332,16 € Na lageru: 1 kom Sila probijanja: 55 t Dubina grla: 250 mm Broj stanica: 5 Maks. prečnik kod debljine lima (konstrukcioni čelik): 40/10 mm Hod: 20 mm Broj hodova: 37/min Ravni čelik: 300x15 mm Ugaoni čelik: 120x10 mm Okrugli/kvadratni čelik: 40 mm Izrezivač: 10 mm Motor: 5 kW Dužina: 1670 mm Širina: 1160 mm Visina: 2090 mm Težina: 1.390 kg 2 nožna prekidača za nezavisni rad na 2 stanice Makaza za ravni čelik Makaza za ugaoni čelik Makaza za okrugli i kvadratni čelik Pravougla izrezivač Probijalica rupa Sto na makazi za ravni čelik Gsdpfx Ajwirxweb Tekf Sto na stanici za probijanje rupa Sto na izrezivačkoj stanici Ulje uključeno Uputstvo za rad na NEMAČKOM i ENGLESKOM jeziku OPCIJA: Set: 970,00 € sastoji se od: Graničnik dužine 1000 mm sa električnim kontaktom za ravni, ugaoni ili okrugli čelik Magnetna mašinska lampa 10 kompleta okruglih probijača i matrica: 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 090132 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €47,500 Leasing rate: €798.38 In stock: 1 Special price: €41,800 Cutting length: 3,100 mm Max. sheet thickness - mild steel: 6 mm Max. sheet thickness - stainless steel: 4 mm Throat depth (side frame): 50 mm Strokes per minute: 15 Cutting angle: 1.5° Number of hold-down clamps: 16 Hold-down force: 14 tons Backgauge: 1,000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank capacity: 200 l Support arms: 2 pcs. Table height: 865 mm Table width: 500 mm Table length: 3,515 mm Length: 4,110 mm Width: 2,200 mm Overall width with support arm and rear safety guard: 3,700 mm Height: 2,100 mm Weight: 7,300 kg Swing beam shear design NC preselection control D-Touch 7 with touch screen for backgauge, cutting length, quantity, USB port Motorized backgauge, up to 1,000 mm, with ball screw spindles, foldable Clear operating panel mounted on swing arm Hydraulic hold-downs positioned close to cutting line Foot switch Gkodpfx Abswiqyys Tof Central manual blade gap adjustment Cutting line illumination Wide support table with ball transfers Piece counter Single and continuous stroke Foldable 1,000 mm finger guard 1 side stop 1,500 mm with scale, T-slot and cam 2 sheet support arms 1,000 mm with T-slot Easy changing and regrinding of blades Adjustable cutting length for economical processing Lower blade with 4 cutting edges Upper blade with 2 cutting edges Oil fill Light barriers on the rear of the machine Qualified after-sales service Operating instructions in GERMAN and ENGLISH Equipment according to CE regulations WE HAVE MORE THAN 850 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,400 Leasing rate: €1,179.36 Cutting length: 4100 mm Max. sheet thickness - mild steel: 6 mm Max. sheet thickness - stainless steel: 4 mm Side frame throat: 50 mm Strokes per min.: 12 1/min Cutting angle: 1.5° No. of hold-downs: 20 Hold-down pressure: 17 t Backgauge: 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank: 200 l Support arms: 3 pcs Table height: 865 mm Table width: 580 mm Table length: 4510 mm Length: 5230 mm Width: 2300 mm Total width with support arm and rear guard: 3600 mm Height: 2150 mm Weight: 11,460 kg Swing cut design NC preset D-Touch 7 control with touchscreen for backgauge, cutting length, piece count, USB port Motorised backgauge up to 1,000 mm on ball screws, foldable Clear control panel mounted on swivel arm Hydraulic hold-downs positioned close to cutting line Foot switch Central manual blade gap adjustment Cutting line illumination Wide support table with ball rollers Piece counter Single and continuous stroke Foldable finger guard 1,000 mm 1 side stop 1,500 mm with scale, T-slot, and cam lever 2 sheet support arms 1,000 mm with T-slot Easy blade change and regrinding Adjustable cutting length for efficient processing Lower blade with 4 usable edges Gksdpfxowiqw Se Ab Tef Upper blade with 2 usable edges Oil filling Light barriers at rear of machine Qualified customer service Operating instructions in GERMAN and ENGLISH Equipment in accordance with CE regulations (Symbolic image) WE HAVE MORE THAN 850 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €59,600 Lease rate: €1,126.44 Cutting length: 3,100 mm Max. sheet thickness - mild steel: 10 mm Max. sheet thickness - stainless steel: 6 mm Stanchion throat: 50 mm Strokes per minute: 13 Cutting angle: 1.5° Number of hold-downs: 16 Hold-down pressure: 22 tons Backgauge: 1,000 mm Backgauge speed: 200 mm/s Motor power: 22 kW Godpfx Aswiqxcjb Tekf Oil tank: 200 l Support arms: 2 pcs. Table height: 865 mm Table width: 580 mm Table length: 3,515 mm Machine length: 4,200 mm Machine width: 2,250 mm Total width with support arm and rear safety guard: 3,600 mm Height: 2,100 mm Weight: 9,300 kg Swing-cut execution NC preselection control D-Touch 7 with touchscreen for backgauge, cutting length, piece count, USB connection Motorized backgauge up to 1,000 mm on ball screws, foldable Clear operator panel mounted on swivel arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Central manual blade gap adjustment Cutting line illumination Wide support table with roller balls Piece counter Single and continuous stroke mode Foldable finger guard 1,000 mm 1 side gauge 1,500 mm with scale, T-slot and cam lock 2 sheet support arms 1,000 mm with T-slot Easy replacement and regrinding of cutting blades Adjustable cutting length for cost-effective operation Lower blade reversible on 4 sides Upper blade reversible on 2 sides Oil filling Light barriers at the rear of the machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment in accordance with CE directives WE HAVE MORE THAN 850 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €94,900 Leasing rate: €1,793.61 Cutting length: 4,100 mm Gjdowirynjpfx Ab Tskf Max. sheet thickness – mild steel: 13 mm Max. sheet thickness – stainless steel: 8 mm Side frame throat: 350 mm Strokes per minute: 8 Cutting angle: 1.75° Number of hold-downs: 18 Hold-down force: 62 t Backgauge: 1,000 mm Backgauge speed: 200 mm/s Motor power: 30 kW Oil tank: 330 l Support arms: 3 pcs. Table height: 818 mm Table width: 550 mm Table length: 4,520 mm Length: 5,350 mm Width: 2,250 mm Overall width incl. support arm & rear safety grid: 3,650 mm Height: 2,250 mm Weight: 16,300 kg Swing beam design NC preselection control D-Touch 7 with touch screen for backgauge, cutting length, quantity, USB port Motorized backgauge up to 1,000 mm with ball screws, tiltable Clearly arranged control panel mounted on swivel arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Central manual blade gap adjustment Cutting line lighting Wide support table with roller balls Piece counter Single and continuous stroke Flip-up finger guard, 1,000 mm 1 side gauge, 1,500 mm with scale, T-slot, and cam 2 sheet support arms, 1,000 mm with T-slot Easy blade change and re-sharpening Adjustable cutting length for economical processing Lower blade with 4 cutting edges Upper blade with 2 cutting edges Filled with oil Light barrier at rear of machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment according to CE regulations (Symbolic photo) WE HAVE OVER 850 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €68,700 Leasing rate: €1,298.43 Cutting length: 3,100 mm Max. sheet thickness – mild steel: 13 mm Max. sheet thickness – stainless steel: 8 mm Throat depth at side frame: 50 mm Stroke rate: 13 strokes/min Cutting angle: 1.75° Number of hold-downs: 16 Hold-down pressure: 37 t Back gauge: 1,000 mm Back gauge speed: 200 mm/s Motor power: 30 kW Oil tank: 330 l Support arms: 2 pcs. Table height: 840 mm Table width: 600 mm Table length: 3,550 mm Length: 4,280 mm Width: 2,300 mm Overall width with support arm and rear safety guard: 3,600 mm Height: 2,350 mm Weight: 12,500 kg Swing cut design NC pre-select control D-Touch 7 with touchscreen for back gauge, cutting length, piece count, USB connection Motorized back gauge up to 1,000 mm with ball screw spindles, foldable Clear operating panel mounted on swivel arm Hydraulic hold-downs positioned close to the cutting line Foot switch Central manual blade gap adjustment Cutting line illumination Wide support table with ball rollers Piece counter Single and continuous stroke modes Foldable finger guard 1,000 mm 1 side stop 1,500 mm with scale, T-slot, and cam stop 2 sheet support arms 1,000 mm with T-slot Easy blade removal and regrinding Adjustable cutting length for economical processing Lower blade reversible on 4 sides Upper blade reversible on 2 sides Oil fill included Light barriers at rear of machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations (Symbol photo) Gedpswir D Hjfx Ab Tjkf WE HAVE MORE THAN 850 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €145,000 Lease rate: €2,740.50 Cutting length: 6080 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Throat depth (side stand): 350 mm Strokes per minute: 10 Cutting angle: 0.5–2° Number of hold-downs: 29 Hold-down pressure: 20 t Backgauge: 1000 mm Backgauge speed: 200 mm/s Motor power: 22 kW Oil tank: 200 l Support arms: 5 pcs Table height: 900 mm Table width: 630 mm Table length: 6370 mm Length: 7300 mm Width: 2150 mm Total width with support arm and rear safety guard: 3400 mm Height: 2750 mm Weight: 25,500 kg Design: Crank-guided system CNC touchscreen control D-touch 7 for backgauge, cutting angle, blade gap, cutting length, piece counter USB port CNC-controlled blade gap adjustment via table (patented) Oil cooler Gkedpfx Abewiqygo Tef Manual central lubrication Cutting line illumination Foldable ball screw for backgauge Balls in table Folding finger guard, 1,000 mm Side gauge with T-slots, flip stop, and scale 5 support arms with T-slots Oil fill included Light barriers at rear of machine Operating manual in GERMAN and ENGLISH PRICE FCA TURKEY (Symbolic image)

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €51,600 Leasing rate: €975.24 Cutting length: 3080 mm Gkjdpfx Aewirwtob Tof Max. sheet thickness (mild steel): 6 mm Max. sheet thickness (stainless steel): 4 mm Throat depth (side frame): 350 mm Strokes per minute: 20 Cutting angle: 0.5 – 2° Number of hold-downs: 16 Hold-down pressure: 20 t Backgauge: 1000 mm Backgauge speed: 200 mm/s Motor power: 11 kW Oil tank: 125 l Support arms: 3 pcs. Table height: 820 mm Table width: 494 mm Table length: 3280 mm Length: 4100 mm Width: 2050 mm Overall width with support arm and rear safety guard: 3650 mm Height: 1950 mm Weight: 7980 kg Sliding block design CNC touchscreen control D-touch 7 for backgauge, cutting angle, blade gap, cutting length, quantity USB port Cutting line illumination Folding ball screw for backgauge Balls in table Foldable finger guard, 1,000 mm Side fence with T-slots, tilting stop, and scale 3 support arms with T-slots Oil filling included Light barriers at the rear of the machine Operating manual in GERMAN and ENGLISH

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrags Ursprungsland Türkei Preis 29200 € Leasingrate 557,72 € Schnittlänge 3.200 mm Max. Blechstärke - Baustahl 2 mm Max. Blechstärke - Edelstahl 1,2 mm Länge 3.650 mm Breite 1.700 mm Gsdpowiq Iksfx Ab Tskf Höhe 1.300 mm Gewicht 3.100 kg NC gesteuerter Hinteranschlag 750 mm ELGO P40T Touchscreen Hinterer Lichtschrankenschutz Vorderere Fingerschutzabdeckung Ausziehbare vordere Auflagekonsole Schnittlinienbeleuchtung Ausrüstung gemäß CE Richtlinien Betriebsanleitung in Deutsch oder Englisch OPTIONEN: Blechhochhaltung, vordere oder hintere Entnahme (NC gesteuert) € 1.900,00 Blechhochhaltung, vordere und hintere Entnahme (NC gesteuert) € 2.840,00 (die Anschlaglänge verringert sich um ca. 200 mm) 1.000 mm Servo-Hinteranschlag € 900,00 Seitenanschlagverlängerung auf 2 m € 410,00 Blechwagen mit Rollen (Kapazität 1.000 kg) € 1.040,00 Winkelanschlag € 460,00

Stanje: novo, Leto izdelave: 2025, Condition: new Year of manufacture: 2025 Stock number: 090039 Delivery time: prompt, subject to prior sale Country of origin: Spain Price: €15,800 Leasing rate: €303.36 Bestseller: 1 In stock: 1 Punching force: 50 tons Throat depth: 177 mm Number of stations: 5 Cylinders: 1 Max. diameter with sheet thickness (mild steel): 31 x 12 mm Strokes per minute: 34 1/min Flat steel: 350 x 15 mm Gkodpfswirahjx Ab Tsf Angle steel: 80 x 8 mm Round/square steel: 35 / 30 mm Notching depth: 10 mm Bending device: 100 x 10 mm Motor: 3 kW Length: 1300 mm Width: 1100 mm Height: 1850 mm Weight: 950 kg Bending station Press capacity: 50 tons 5 work stations Flat bar shear with device to reduce deformation 350 x 10 mm at 2° setting 350 x 15 mm at 5° setting Angle iron shear 80 x 8 mm with round and square openings 35/30 mm Rectangular notcher 90 x 42 x 10 mm Punching station 31 x 12 mm Bending device for flat bars max. 100 x 10 mm Table at the flat bar station Table at the notching station Electrical back gauge 2 bending dies, V40 and V70 Throat depth at punching station: 177 mm Vertical movement at all stations (not arc-shaped) Hydraulic drive 1 foot switch Operating instructions in GERMAN and ENGLISH