Plastike nakup rabljenega (2.872)

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: FCA Pegnitz Gsdpfx Afjwlkcas Seir Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 40.885 h, skupna masa: 6.500 kg, delovna prostornina: 49 cm³, vpenjalna sila: 110 kN, tlak vbrizgavanja: 2.236 letvica, premer polžastega transporterja: 18 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Giodpfjw N Egasx Af Ssr Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 60.000 h, vpenjalna sila: 50 kN, delovna prostornina: 490 cm³, tlak vbrizgavanja: 2.000 letvica, skupna masa: 2.300 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Giodpfx Ajxa Htzef Ssr

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 60.790 h, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Gedpfx Ajh Tk Rvsf Seir Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 70.000 h, vpenjalna sila: 120 kN, delovna prostornina: 154 cm³, tlak vbrizgavanja: 2.175 letvica, skupna masa: 7.300 kg, premer polžastega transporterja: 35 mm, Freight basis: ex works Delivery time: by agreement Gjdeqy Uklopfx Af Sjir Payment terms: 100% prior to collection, net Manufacturer: Engel Model: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 70,000 CLAMPING UNIT: Clamping force: 120 t Opening stroke: 500 mm Min. mold height: 300 mm Max. mold height: - Platen dimensions (H x V): 790 x 680 mm Centres (nozzle/ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,175 bar CONTROL: CC200 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 Air valves: yes Hot runner zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated removal conveyor (opposite operator side) +750mm, needle shut-off (hydraulic + pneumatic), interface for color doser and temperature control unit. GENERAL DATA: Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: motor + heater Total weight: 7,300 kg Overall dimensions L x W x H: 4.4 x 1.4+0.8 x 2.0 m

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 4.200 h, vpenjalna sila: 90 kN, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.400 letvica, skupna masa: 7.500 kg, premer polžastega transporterja: 30 mm, Dobavni pogoji: iz lokacije Giodpfev S H N Rjx Af Sor Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 81.700 h, vpenjalna sila: 45 kN, delovna prostornina: 69 cm³, tlak vbrizgavanja: 2.400 letvica, skupna masa: 3.300 kg, premer polžastega transporterja: 25 mm, Freight terms: ex works Delivery time: by arrangement Payment terms: % prior to machine takeover, net Manufacturer: Engel Model: VICTORY 200/45 Tech + er/usp Condition: from ongoing production Operating hours: approx. 81,700 CLAMPING UNIT: Clamping force: 45 t Opening stroke: 355 mm Min. mould installation height: 175 mm Max. mould installation height: - Tie bar spacing (h x v): tie-barless Platen size (h x v): 550 x 430 mm Centering (nozzle/ejector plate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Shot weight in polystyrene: 63 g Stroke volume: 69 cm³ Injection pressure: 2,400 bar CONTROL SYSTEM: CC Screen languages: DE Operating manual: DE EQUIPMENT: Core pulls: 1 Godpsrbqtnsfx Af Soir Air valves: - Hot runner control zones: - Robot interface: sprue picker er/usp Other equipment: hydraulic needle shut-off, interface for dosing and temperature control unit GENERAL DATA: Installed heating capacity: 6.8 kW Pump drive power: 11 kW Total connected load: motor + heating Total weight: 3,300 kg Overall dimensions (L x W x H): 3.3 x 1.2 x 2.2 m

Stanje: rabljeno, Leto izdelave: 2005, Demag extra 50-200 Gijdpfx Afjyypm Tj Sor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Sušilnik Arburg Thermolift 100, letnik 2004. Giodpfex I Hlijx Af Ser

Stanje: rabljeno, Leto izdelave: 1986, Sušilnik Simar SM 120 W, letnik 1986, priključna moč 10 kW, približno 120 l. Gijdjx I Nckspfx Af Ser

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Zapiralna sila: 320 t Zapiralna sila: 3200 kN Odpiralna sila: 130 kN Ojačana odpirna sila: 100 / 800 kN Odpiralni hod: 700 mm Višina orodja: 300–700 mm Razdalja med vpenjalnimi ploščami: 1000–1400 mm Velikost plošče: 1040 × 1040 mm Največja teža orodja (na polovico): 3600 kg Izmetalna sila: 100 kN Izmetalni hod: 250 mm Gjdpfoyya Injx Af Soir Premer polža: 50 mm Teža brizga: 359 g Razdalja med vodili V: 720 mm Razdalja med vodili H: 720 mm Prostornina brizga: 392 cm3 Moč pogona črpalke: 45 / 55 / 55 kW Čas suhega cikla: 3,5–504 s Vgrajena skupna moč: 70,5 / 89 / 96 kW Tip: Horizontalen Pogon: Hidravlični

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Oprema: dokumentacija / priročnik, Število osi: 3 Doseg: 1500 mm Gedpfjyftw Eox Af Sjir Nosilnost: 6 kg X = 420 mm Y = 1200 mm Z = 1500 mm

Leto izdelave: 2013, stanje: skoraj kot novo (rabljeno), Brand: BDPLAST Year of manufacture: 2013. Suitable for extruders with screw diameters from 90 to 150 mm. Universally applicable, as new, only approx. 500 operating hours. Design: Plate screen changer Screen diameter: 250 mm Gijdpfxehwwqfj Af Sjr Filtration area: 491 cm² Sealing ring: PTFE / Teflon Heating capacity: approx. 22 kW Number of control zones: 4 Max. operating temperature: 260°C Max. operating pressure: 400 to 500 bar Hydraulic unit designed for quick change (accumulator pre-charged with nitrogen) Throughput capacity: 800 to 2000 kg/h Weight: 950 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, 5 pieces: • Gravimetric screw feeder • Feed hopper with pneumatic rotary valve, each with cover Godpfx Afst S Rduo Seir • Screw conveyor from Big Bag unloading, each with height-adjustable individual frame 1 piece: • Trough screw conveyor for combining and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension crossbeam that prevents the Big Bag from collapsing during emptying • Big Bag base plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Leto izdelave: 1996, stanje: dober (rabljeno), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: Used, fully functional Model: KMD-2-50-KK Output: max. approx. 140-180 kg/h for H-PVC pipes; actual values may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50-103 mm (conical) Screw length: 1300 mm Screw speed: max. 43 m/min Drive motor: DC motor, 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Feed zone heating: 1 Tool heating zones: 5 Equipment: Dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw tempering Gearbox: Gearbox was replaced at 53,000 operating hours. Overhauled screws and cylinder Note: Current operating time is 62,590 hours. Godpfsh Nmt Dox Af Ssir

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel Giodpfx Afohx Elfo Sor The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.000 mm, skupna masa: 12.000 kg, temperatura: 900 °C, Oprema: varnostna svetlobna zapora, TOOLS FACTORY TF Millenium 875 Plus Termoformirni stroj Gijdpjyy Rrdofx Af Ssr Stopnice Kovinski okvir za kalupe – 3 kosi Izsek (štanca) Modifikacija hladilnega sistema Črna smola, ki se uporablja za kalupe in kovinski okvir Novi filtri za stroj Dimenzije termoformirnega stroja so: 2 identična dela, vsak 350 cm x 550 cm x 355 cm, teža vsakega dela je 6 t. Nudimo demontažo stroja, pakiranje in nakladanje na tovornjak. Po dogovoru lahko ponudimo tudi montažo stroja v vaši proizvodnji (opcijsko).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1 used injection moulding machine with robot Gedpfxewcb Nro Af Seir Manufacturer: KRAUSS MAFFEI Model: CX250-1000 Year of manufacture: 2010 Clamping force: 300 tons Tie bar spacing: 630 x 630 mm Minimum mould height: 330 mm Opening stroke: 820 mm Screw diameter: 50 mm Max. shot volume: 432 cm³ Shot weight: 393 g/PS Control system: MC5 Equipment: Robot: Krauss Maffei, type: LRX100S 2 core pulls on the moving platen High-wear-resistant injection unit

Stanje: novo, Leto izdelave: 2026, NDS 2 • Konstrukcija iz aluminijastih profilov • Nastavljiv kot/nagib • Dolžina poševnega dela: 1300 mm • Uporabna širina: 350 mm • Nakladalna dolžina: 600 mm Giodpswktn Aofx Af Ser • Separirna dolžina: 800 mm • Minimalna višina (H min): 600 mm • Maksimalna višina (H max): 1000 mm • Vključen separator z lopaticami

Stanje: novo, Leto izdelave: 2026, Mlin brez sita Xtra2-A / 26.26 St Nizkohitrostni mlin brez sita, z dvema grobima drobilnikoma, kompakten in premičen na 4 kolesih, od tega 2 z zavoro. Dovodni lijak in rezalna komora se enostavno in popolnoma odpirata preko tečajnega mehanizma in hitrega zaklepa, kar omogoča hitro in preprosto čiščenje. Rotor tipa drobilnika z dvema primarnima grobima drobilnikoma, vsak s tremi drobilnimi prsti, ki omogočajo tudi drobljenje nerodnih in večjih kosov odrezkov. Krmiljenje z kontaktorjem in električno redundantnimi varnostnimi končnimi stikali. Krmilna enota je vgrajena v plastično ohišje, vključno s 4-metrskim priključnim kablom in vtičem CEE 16A/6h. Standardni Z-lijak iz prozorne pločevine iz polikarbonata (PC) s široko odprtino za nalaganje. Zbirna škatla za mlet material s prostornino 8 litrov, vključuje sesalno cev za priklop cevi s premerom ND 38 ali 40 mm. Tehnični podatki: • Moč motorja: 1,5 kW • Napajanje: 3 x 400 V, 50 Hz • Odprtina rezalne komore: 260 mm x 260 mm • Primarni drobilniki: 2 kosa, vsak s 3 drobilnimi prsti • Hitrost rotorja: 32 vrt/min • Rotor: večzobni, 3 kosi • Statični noži: 2 x 3 utrjeni noži • Rezalna konfiguracija: standardni rezalni modul 4 mm (širina zob rotorja); opcijsko 5 mm Gijdpfewktvgex Af Ssr

Stanje: novo, Leto izdelave: 2026, MEŠALNIK Mod. MV2 • Jeklena konstrukcija, zunanja površina pobarvana (RAL 9006) • Kapaciteta: 120 kg / 200 litrov • Kvadratni okvir: 700 x 700 mm • Nastavljiva višina: od 1085 mm do 1385 mm (od tal do nalagalne točke) • Programabilna krmilna enota z gumbom za zaustavitev v sili (Stranka lahko izbira med ročnim načinom – neprekinjeno delovanje – in avtomatskim načinom – z nastavljivim časom delovanja in pavze) • Motor z reduktorjem: 0,5 KM / 0,37 kW, 220/380V, 50 Hz • Zgornja dvižna vrata s tečaji za nalaganje materiala z varnostnim mikro stikalom • Spodnja dvižna vrata za izpust materiala z varnostnim mikro stikalom • Stranske odprtine za priklop sesalne cevi • Okvir mešalnika na nastavljivih teleskopskih nogah z vrtljivimi kolesi z zavoro Gsdpfx Afewktm Eo Soir

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, vpenjalna sila: 1.000 kN, Clamping force: 100 t Max. opening: 500 mm Mould height: 250 mm Platen size: 590x600 mm Distance between columns (vertical): 420 mm Distance between columns (horizontal): 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm³ Godpfxex Tdp Ns Af Soir Injection pressure: 2755 Additional equipment: 1. 2 hydraulic core pull circuits on the moving clamping plate (proportional valves) 2. Additional connections for 2 core pulls on the fixed clamping plate 3. Pneumatic core pull (2 circuits) on the moving clamping plate 4. 4-zone cooling water flow regulator with temperature display 5. Compressed air blow-out valves on fixed and moving clamping plate (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation devices

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, vpenjalna sila: 8.000 kN, premer vijaka: 90 mm, skupna širina: 3.000 mm, skupna višina: 2.500 mm, skupna masa: 44.000 kg, največja dolžina izdelka: 8.900 mm, Hydraulic injection moulding machine from 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of approx. 90 mm. It has a shot volume of about 2700 cm³ and a maximum injection pressure of around 1900 bar. If you are looking for a high-quality injection moulding machine, you should consider the Engel DUO 5550/800, which we offer for sale. Please contact us for further details. • Injection volume: ~2700 cm³ • Max. injection pressure: ~1900 bar • Plasticising capacity: ~77 g/s • Clamping unit: Two-platen design (not a conventional toggle system), larger mould area for easier tool changes, uniform clamping force distribution • Injection unit: Hydraulic, high-performance plasticising; suitable for thick-walled or large-volume parts Giodpey Alwmofx Af Sjr • Control unit: ENGEL EC100 or similar; CNC basic functions and recipe management; integration of robots and peripheral equipment possible • Typical applications: Automotive parts (e.g. bumpers, dashboard components), large housings and covers, industrial parts, thick-walled technical parts • Benefits: High clamping force for large parts, more compact than traditional column machines, robust industrial design, easy to automate Additional equipment • Not specified/included in the information provided • Note: The control unit indicates the possibility for integration of robots and peripheral devices; however, no accessories are included in the scope of supply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Engel ES 3550/650 Schließkraft 650 t Zusatzzugkraft bis 725 t Baujahr 1996 Holmabstand 102,5 x 92,5 cm Schneckendurchmesser 90 mm Gjdpsxvmmyofx Af Ssir Schussgewicht 2400 g Schussgewicht 2230 g Holmweite 92,5 x 102,5 cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Engel ES 4450/600HL Zapiralna sila: 600 ton Leto izdelave: 1999 Polž: 90 mm Giedpfx Aoxxcyusf Sjr PVC valj z dodatnim polžem Za PP, PE, ... Vbrizgana količina: 2480 cm³ Velikost vpenjalnih plošč horiz. x vert.: 1480x1300 mm Minimalna višina orodja: 500 mm