Peddiworker 800 nakup rabljenega (19.256)

Stanje: rabljeno, številka stroja/vozila: 8799, Infeed opening: 400 x 800 mm Rotor diameter: 400 mm Width: 800 mm Hodpeghgb Esfx Ah Dsnu Rotor knives: 5 Stator knives: 2 Drive: 45 kW Sprue granulator, granulator, plastic mill, cutting mill

Leto izdelave: 2020, Stanje: novo, Häwa Root Reducer NEW Hnsdpfx Aofccp Hsh Dju Model: H 276 / 800 Trunk Diameter: 0.2m – 1m (Root Start 1.2m) Minimum Log Length: 2.4m – 5m (longer lengths possible) Total Weight: 5 t Total Connected Load: 45 kW Includes radio remote control

Leto izdelave: 2020, Stanje: zelo dobro (rabljeno), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: Designed for a maximum load of 250 kg Technical specifications for temperature tests: Temperature range: -55°C to +180°C Temporal temperature fluctuation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Technical specifications for climatic tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Climatic performance data (excerpt) Humidity range: 10 to 98% relative humidity (r.h.) Temporal humidity deviation: At center of test space, under stabilized conditions, depending on climate value: ±1 to ±3% r.h. Temporal temperature deviation: At center of test space, under stabilized conditions, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to set value (in range > 20% r.h.): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Hnedpfxjw R Rt Is Ah Dsu Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with Greenmode Weight: approx. 2050 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) If you have any further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 1984, Oznaka stroja: Rabljena filtrska stiskalnica Proizvajalec: Netzsch Tip: 800/32 Leto izdelave: 1984 Izvedba: Stransko letevna stiskalnica Filtracijski tlak: 15 bar Vsebnost stiskalnice: ca. 480 litrov Izpust: Zaprt Filtrirna površina: ca. 34 m² Format plošč: 800 x 800 mm Število plošč: 32 Hjdsw Rb Ehopfx Ah Denu Material plošč: Polipropilen Transport plošč: Avtomatski Naprava za pranje filtrirnega blaga: Ne Dolžina paketa plošč: ca. 2000 mm Debelina torte: 30 mm Tlak zapiranja: 350 bar Dimenzije: D 4.500 x Š 1.700 x V 2.000 mm Lastna teža: ca. 5000 kg Dodatna oprema: Kontrolna omarica, hidravlični sistem, svetlobna pregrada in kapalne plošče. Stanje: Rabljeno Cena: Na zahtevo

Leto izdelave: 2021, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100654, Rematec 800 kladivni mlin Skoraj kot nov z malo delovnimi urami Pravkar obnovljen Dvojno število kladiv (436 kosov) Vključuje: Dovodni polž Magnet Iztočni polž Hnsdpsxb Dhljfx Ah Deu Rezervna kladiva Nosilni okvir Frekvenčni pretvornik

Stanje: zelo dobro (rabljeno), Chipper 15 kW. Gearbox newly reinforced version, chipper shaft newly mounted. Including conveyor belt. Hnedpfx Aowzcd Ush Dsu

Stanje: rabljeno, številka stroja/vozila: 12883, Rotor width: 800 mm Rotor knives: 5 Stator knives: 4 Hjdpowbwqvjfx Ah Denu Feed opening approx. 500 x 800 mm Drive motor: 45 kW

Stanje: rabljeno, Leto izdelave: 1999, X travel 800 mm Y travel 630 mm Z travel 560 mm Total power requirement 60 kW Machine weight approx. 12.5 t Space requirement approx. ... m H E L L E R CNC-controlled horizontal 5-side machining center Model: FST-MC 160/800 / E Year of manufacture: 1999 – Only approx. 500 hours in operation --- Working range: Longitudinal travel X-axis 800 mm Vertical travel Y-axis 630 mm Cross travel Z-axis 560 mm NC rotary table - tilting A-axis 180.000° Rotary B-axis 360.000° Max. workpiece size approx. 450 x 450 x 340 mm (larger dimensions possible with restrictions) Pallet size approx. 450 x 620 mm Tool interface HSK 63A Spindle speeds, stepless 63 - 20,000 rpm Feed/rapid traverse XYZ 1 - 70,000 mm/min Spindle drive power 24 kW Hnsdjt Hwrhopfx Ah Dju Total power load approx. 60 kW – 400 V – 50 Hz Weight approx. 12,500 kg Accessories / Special Equipment: • 5-axis CNC path control SIEMENS SINUMERIK 840 D for true 5-side machining • Workpiece handling system: workpiece is mounted on a pallet outside the machine and is fed via a roller conveyor into a lifting/rotating device, which then positions the pallet onto the rotary/tilt table for automatic clamping and machining. • 40-slot tool magazine with tool loading station, laser tool breakage control • Internal coolant supply HD-50 bar • Advanced coolant treatment system with filtration and temperature control • Oil mist extraction • Separate chiller for motor spindle and electrical cabinet • CO₂ fire extinguishing system • Chip conveyor and complete enclosure • Spacious operator platform for personnel and monitoring, height 600 mm Price ex stock, plus VAT: €89,000 The machine comes from the development department of a vehicle manufacturer and was used only for testing purposes. The original purchase price was around 1.3 million DM. This is a rare opportunity for medium batch production. Particularly well suited for aluminium machining. H E L L E R (Germany) 5-Axis CNC Controlled Horizontal Machining Centre Model FST-MC 160/800/E Year: 1999 Only approx. 500 hours in operation. [Text cuts off for accessories description]

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Kompletna linia do lakierowania parkietu Producent: SORBINI/VIET Rok produkcji: 2001 Wydajność: 800 m²/zmiana Czas jednego cyklu: 8 minut Hnjdpfxordgrve Ah Dsu Długość linii: 42 m

Leto izdelave: 2016, Stanje: rabljeno, Haewa / SMS Debarking Milling Head Carriage made from a heavy welded steel construction 4 pairs of log drive wheels 1 split, toothed pair of log drive wheels Log drive with 2 speeds Hydraulics for ejector Milling arm made from a heavy steel construction Milling head: working width 300 mm, impact bars, impact knives, and run-on ring Milling head equipped with carbide tips Hydraulic lowering of the milling head Carriage drive frequency controlled, v = 0 – 60 m/min Type H 249 / 800 Hnsdocrp Akspfx Ah Dou Log drive wheels 800 mm Log diameter 0.2 m – 1.0 m Log length 2.0 m – 6.0 m (longer possible) Total connected load 35 kW With operator control panel

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 1000 t Gap width: 5000 mm Stroke: 500 mm Hnsdpfx Ahewwl R Ae Deu Center height: 400 mm Machine dimensions: 6000 x 2500 mm Weight: 1000 kg Center distance: 3500 mm Machine weight approx. 220 t Hydraulic 1,000 ton press Table size: 3500 x 2200 mm Distance between table and ram: min. approx. 400 mm / max. approx. 1580 mm Drawing cushion in the table with 500 mm stroke and 300 ton counterforce External dimensions approx. 6000 x 2500 mm Height approx. 8500 mm (above floor level) Pit depth (for hydraulics and other units): approx. 5000 mm Total weight approx. 220 t; the heaviest single part is the head piece at approx. 64 t Siemens control system As it is equipped with a cutting shock absorber, the machine can also be used for punching (cutting). The side columns have passages of approx. 1,100 mm width. Thus, punching tools can be supplied with strip material from both sides. Technical data – see images

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 15005225, Automatic Banding Machine HIMA BA 30/800 Year of Manufacture: 10/2004 - Serial No. 15005.225 Suitable for coated kraft paper or plastic film Technical specifications: - Output: up to 23 cycles per minute - Width of banded product: 30 - 310 mm - Stack height: 3 - 200 mm - Band width: 30 mm Triggering of cycle: – Manual / Start button – Foot actuator – Automatic mode button Online video inspection possible via Skype Hnjdpfxen Aw Uco Ah Dsu We would be pleased to welcome your visit – more machines available in stock Available immediately – Inspection possible Located in Emskirchen / Nuremberg – Testing possible on site

Stanje: rabljeno, Leto izdelave: 1999, Litinasti okvir Težka stroj 800 mm krmilni kolesi Paralelna vodila Podaljšek mize na izhodu stroja Hsdpfowyapxex Ah Denu 4 kW motor 380 V

Stanje: dober (rabljeno), Leto izdelave: 2017, 1 x Nilma kontinuirana cvrtnik Hjdpfx Ajxcazdsh Denu Model: Frymatic 180/800 Leto: 2017

Stanje: dober (rabljeno), Leto izdelave: 1993, Rotor width 800 mm 22 kW motor 20 knives on rotor, 25 mm concave Hnsdpfep H Sv Dex Ah Deu A wooden frame is also included to raise the chipper, allowing a conveyor belt to fit underneath.

Leto izdelave: 2022, Stanje: zelo dobro (rabljeno), Weiss Type: T/800/70/10 Water-cooled External dimensions (H x W x D): 2085 x 1415 x 2810 mm Test chamber dimensions (H x W x D): 950 x 1100 x 800 mm Volume: 800 liters Minimum temperature: –72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature uniformity (spatial): ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation at +20 °C: 8000 W Power supply: 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 kW Rated current: 57 A Operating hours: approx. 10 (Never used) Condition: used Weight: 1600 kg Scope of delivery: (see picture) Sale ex location! Hedpevxrwgjfx Ah Djnu (Subject to change and error in technical data and specifications!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Schuler PE4s 50/800 High-Speed Press Manufacturer: Schuler Model: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Throat depth: 800 mm Strokes per minute: 125–300 Ram stroke: 40 mm Kohler decoiler 500.1 M Documentation will be provided after purchase We are selling a large number of paternosters. In addition to approx. 50 paternosters, we have countless other machines available. Hnodsgryc Nopfx Ah Dju After purchase, payment is due within 7 working days. Please also check out our other offers. Happy browsing and shopping. You will find more articles – both new and used – in our shop! International shipping costs on request!

Stanje: skoraj kot novo (rabljeno), maximum material height: 50 mm table dimensions: 800 x 600 cm throat clearance: 109 cm motor power: 0.75 kW Hedpowixlwofx Ah Djnu year of manufacture: 2000 380 V CE certified

Stanje: rabljeno, Leto izdelave: 2014, Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor dates from 2014 and is in excellent (used) condition. It features 13 white strip belts made of 2-ply PET on an angled, sloped stainless steel sheet construction. Technical Data: Manufacturer: Kannegiesser Model: Belt Conveyor 800/2500 Year of manufacture: 2014 Condition: Very good (used) Motor: Fully functional Length: 2,500 mm (overall tensioned) Belt width: 50 mm (13 pcs) Frame width: approx. 890 mm Construction height/belt incline: from 175 mm rising to 750 mm Number of support legs: 2 with castors Load capacity: 30 kg Conveying speed: 0.6 m/s constant Drive: Helical geared motor Electrical data: 0.37 kW, 230 / 400 V, 60 Hz Return drum: Ø = 50 mm, stainless steel Belt return roller: Ø = 50 mm, stainless steel Belt: 2-ply white PET belt Construction/design: CNC laser-cut and folded stainless steel sheet frame. Material: 1.4016 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, feel free to contact us. Simply get in touch by phone or email. We are happy to support you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics. Hodpfx Ahsk Aa Rgj Djnu

Leto izdelave: 2023, Stanje: generalkompletno obnovljen (rabljeno), Shrink-Wrapping Machine SFV/800 Completely overhauled in 2023 Minimum workpiece length: 1000 mm Maximum workpiece length: 6300 mm Maximum width: 290 mm Maximum height: 180 mm Speed: 15-60 m/min at a maximum film thickness of 40 μm Hodpfsin Nnkex Ah Djnu Maximum film width: 970 mm Film feed from above Film thickness starting at 25 μm Heating elements: Radiant heaters Power: 15-24 kW Weight: 1900 kg Shrink tunnel length: 3500 mm Electrical control: Siemens CPU S7-1500

Stanje: zelo dobro (rabljeno), premer struženja nad prečnim suportom: 1.100 mm, izvrtina vretena: 102 mm, premer struženja: 1.600 mm, premer struženja nad ležiščem sani: 1.950 mm, središčna višina pri ročični gredi: 800 mm, Gurutzpe Super BT 800 x 2000 mm lathe, equipped with digital readout, swing over bed 1580 mm, over cross slide 1100 mm, in the gap 1950 mm, gap length in front of chuck 620 mm, spindle bore 102 mm, 36 speeds range from 2.8 to 400 rpm, 30 HP motor, 4-jaw independent chuck with a diameter of 1400 mm, bed width 800 mm, tailstock quill diameter 180 mm, lathe with DRO installed, maximum weight between centers 10 tons (with steady rest 12 tons), estimated weight of lathe and tooling 14,450 kg. Hsdoq R Rknepfx Ah Djnu

Stanje: novo, Leto izdelave: 2024, Mitre saw with a saw blade diameter of 600mm (optionally 800mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are continuously adjustable) - Two-hand safety control Optional available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Version as fully automatic saw Hedpfx Ahjd Rhzie Djnu - Pre-loading magazine - Horizontal clamping device - Extraction system - Additional accessories on request We will be happy to provide you with a customised offer tailored to your requirements. The machine can be inspected and tested at 56812.

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Cut-off Saw AS-600 Demonstration machine Includes saw blade with a diameter of 600 mm. Includes automatic minimum quantity lubrication system. Includes smooth table and manual length stop. The machine can be viewed on site by arrangement. Hnjdpfx Ahed A T Efs Deu

Stanje: novo, Longitudinal Cut Saw LAS. Depending on customer requirements and specifications, we manufacture longitudinal cut saws with the appropriate saw blade diameters. The cutting range is determined individually in direct collaboration with the customer to ensure fast and efficient processing. Optionally, we offer the possibility to combine the machine with a matching length stop. Hnedpjd A Tq Defx Ah Dsu Mitre devices, coolant units, and suitable extraction technology are available on request.

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Mitre saw with a 600 mm saw blade diameter (optional 800 mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (clamping cylinder height and tilt angle steplessly adjustable) - Two-hand safety control Options available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Sawing machine version - Preloading magazine - Horizontal clamping device - Extraction system - Further accessories on request We would be pleased to provide you with a tailored quotation according to your requirements. Hjdpfxsd Rhzwj Ah Donu The machine can be inspected and tested in 56812.