Pas Za Pranje nakup rabljenega (83.195)

Leto izdelave: 2026, stanje: novo, With the batch pasteurizer, you can pasteurize various products such as jams, juices, creams, and much more. The water is heated by two heating elements, the bottles are placed in wire baskets and brought up to the desired temperature. Temperature control is fully automatic, and once the set temperature is reached, the system switches off automatically. Technical Data: • Nominal capacity: 200 L/cycle • Power requirement: 12 kW, 400 V, 32 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 500 x 1100 x 900 mm • Weight: 130 kg • IP65 electrical control box • Exterior tub insulation • Automatic temperature control • Manual operation • Minimal maintenance Optional: Csdpfsfdzqlox Agujgu • Additional wire baskets • Mobile frame

Leto izdelave: 2026, stanje: novo, With the batch pasteurizer, you can pasteurize various products such as jams, juices, creams, and much more. The water is heated by two heating elements, the bottles are placed in the wire baskets, and brought to the desired temperature. Temperature control is fully automatic, and once the set temperature is reached, the unit switches off automatically. Technical specifications: • Nominal capacity: 100 L per batch • Power requirement: 9 kW, 400 V, 32 A • Material: Stainless steel, Wnr. 1.4301, AISI 304 • Dimensions: 500 x 1100 x 900 mm • Weight: 75 kg • IP65 electrical control cabinet • Tank insulation exterior Cgjdsd Aq Ifspfx Aguju • Automatic temperature regulation • Manual operation • Minimal maintenance Options: • Additional wire baskets • Mobile frame

Leto izdelave: 2023, stanje: novo, Overband Plate Magnet with Cleaning Mechanism Design: tightly welded VA 1.4301 stainless steel Includes cleaning drawer Dimensions: 800 x 500 x 180 mm 4 pcs. M16 lifting eyes on the rear side Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Cgjdpfx Ajk S Dzasguju Our core competence lies in delivering exactly what our customers actually need. We work together with our clients to develop customized, individual solutions and supply corresponding systems from our in-house production. Feel free to contact us by phone to find the right solution for your application. Overband Plate Magnet Design: tightly welded VA 1.4301 Includes cleaning drawer 420 x 420 x 180 mm 600 x 500 x 180 mm 800 x 500 x 180 mm 1000 x 500 x 180 mm 1200 x 500 x 180 mm Fully welded stainless steel housing to protect the magnetic core Lifting eyes for suspension Cleaning drawer for easy removal of accumulated contaminants. Can be mounted above any conveyor system...

Stanje: pripravljen za uporabo (rabljen), Plate magnet, lifting magnet, overband magnet, police magnet, magnetic filter, magnetic separator We always have a wide range of magnetic materials, models, and sizes in stock. Available standard sizes: 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 820 x 520 x 200 mm 820 x 520 x 250 mm 1000 x 500 x 180 mm 1200 x 500 x 180 mm 1200 x 500 x 200 mm 1200 x 500 x 250 mm 1500 x 500 x 180 mm 1500 x 500 x 200 mm 1500 x 500 x 250 mm 2000 x 500 x 180 mm 2000 x 500 x 200 mm 2000 x 500 x 250 mm Cgsdpfx Ashupizeguju All information is provided without guarantee, available only while stocks last! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competency lies in supplying the customer with exactly what they really need. We work together with our customers to develop customized, tailor-made solutions and deliver corresponding equipment from our own production. Feel free to contact us by phone as well, so we can find the right solution for your application. Installation possible over all types of conveyor systems...

Leto izdelave: 2024, stanje: novo, Overband Plate Magnet with Cleaning Mechanism Design in stainless steel VA 1.4301, fully welded and sealed Including cleaning drawer Dimensions: 800 x 500 x 180 mm 4 pieces M16 lifting eye bolts on the rear side These two lifting magnets were previously used by one of our customers as 'police magnets' in the meat processing industry. Csdpfxehfwmdj Aguogu Both overband magnets are in excellent condition. The specified price refers to one unit. Currently, there are still 2 units available for immediate delivery from stock! All information is provided without guarantee; only while stocks last! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competency is delivering exactly what our customers truly need. Together with our clients, we develop and manufacture customized, individual solutions and deliver suitable systems from our own production. Feel free to contact us by phone to find the right solution for your application. Overband Plate Magnet Design in stainless steel VA 1.4301, fully welded Including cleaning drawer 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 800 x 500 x 200 mm 800 x 520 x 250 mm Completely welded stainless steel housing to protect the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of accumulated contaminants Can be installed above any conveyor system...

Leto izdelave: 2020, stanje: skoraj kot novo (rabljeno), Magnetic tape, overband magnetic separator, magnetic filter, lifting magnet, overband magnet Permanent Overband Magnetic Separator TYPE PEM1800 1800 x 1000 x 400 mm ===== 4x eye bolts for suspension Csdpfxshun Uus Aguegu Magnet dimensions: 800 x 500 x 180 mm PU conveyor belt with hard cover, black matte Internal bearing lubrication for 10,000 operating hours Protection class: IP-65 Three-phase geared motor GEMOTEG 1.1 kW Enclosure: RAL 5015 Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic tape separator Our core competence lies in supplying customers exactly what they actually need. We work together with our customers to develop custom, individual solutions and supply appropriate systems from our own production. Feel free to contact us by phone as well to find a suitable solution for your application.

Leto izdelave: 2025, stanje: novo, Overband magnet Długość: 2500 mm Cedpfx Agjh U R Tgjuogu Wysokość: około 400 mm Szerokość: 1000 mm Szerokość taśmy: 750 mm Szerokość magnesu: 500 mm Długość magnesu: 1044 mm Moc: 1,5 kW (napęd hydrauliczny lub elektryczny) Indukcja magnetyczna: 400 Gauss (możliwość wychwytywania elementów o wielkości do 100 mm z maksymalnej odległości 300 mm) Overband nowy, 12 miesięcy gwarancji,

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YAM0035, moč servomotorja: 1.200 W, vhodna napetost: 230 V, razmak između stupova: 80 mm, vrsta vhodnega toka: Klimatska naprava, globina grla: 150 mm, dolžina podajanja os X: 30 mm, dolžina pomika po osi Y: 85 mm, dolžina podajanja os Z: 12 mm, pnevmatska povezava: 10 letvica, AMF REECE ATLAS Mark IV avtomatiziran stroj za pasove (2020) Sodobni visokohitrostni proizvodni sistem – Pripravljen za video kategorijo Opis Naprodaj je avtomatizirana industrijska šivalna enota AMF Reece Atlas Mark IV, izdelana leta 2020. Gre za sodoben programabilni proizvodni sistem, zasnovan za natančno in ponovljivo izdelavo delov oblačil. To ni običajen šivalni stroj, temveč popolnoma avtomatizirana enota, sposobna izvajanja predprogramiranih šivalnih ciklov z visoko natančnostjo in stalno kakovostjo. Stroj je bil uporabljen v profesionalnem proizvodnem okolju in je naprodaj kot popolna industrijska delovna postaja. Leto izdelave: 2020 Sodoben digitalni nadzorni sistem Proizvodna konfiguracija pripravljena za delo Ključne prednosti - Sodobna generacija stroja z nizko mehansko obrabo - Popolnoma programabilni šivalni cikli - Visoka ponovljivost in natančnost - Primeren za neprekinjeno industrijsko uporabo - Enota evropske izdelave z dobro razpoložljivostjo rezervnih delov Ključne lastnosti - Programabilni avtomatski šivalni cikli - Integriran zaslon na dotik za upravljanje - Pnevmatsko podprto delovanje - Visokonatančen nadzor šiva - Stabilna robustna konstrukcija (Kessler podnožje) - Zasnovan za neprekinjena proizvodna okolja - Hitro preklapljanje med šivalnimi programi Vključuje - Strojna enota AMF Reece Atlas Mark IV - Integriran upravljalni sistem z zaslonom na dotik - Pnevmatske komponente - Industrijska miza in Kessler podnožje - Nosilci za sukance Tehnični podatki Proizvajalec: AMF Reece Model: Atlas Mark IV Leto: 2020 Serijska številka: YAM0035 Napajanje: 230 V, 1 faza, 50/60 Hz Moč: 1,2 kW Tok: 8 A Izvor: Češka CE oznaka Potrebna pnevmatika Stanje Rabljeno industrijsko stanje Iz profesionalnega proizvodnega okolja Običajni znaki uporabe Prodaja po načelu "videno-kupljeno", brez garancije Možen ogled pred nakupom Uporabnost - Operacije za pasove - Prišivanje žepov - Šivanje delov iz jeansa - Proizvodnja delovnih oblačil - Avtomatizirana izdelava delov oblačil Cgedpjy Nd Ukjfx Aguju - Ponavljajoče se natančne šivalne operacije Lokacija Valga, Estonija Logistika Kupec je odgovoren za razstavljanje in transport

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2MAZL000283, moč servomotorja: 350 W, vhodna napetost: 230 V, razmak između stupova: 70 mm, vrsta vhodnega toka: Klimatska naprava, globina grla: 120 mm, dolžina podajanja os X: 22 mm, dolžina pomika po osi Y: 78 mm, dolžina podajanja os Z: 10 mm, pnevmatska povezava: 6 letvica, JUKI MOL-254 – Avtomatski stroj za prišivanje pasnih zank Enota za hitro industrijsko proizvodnjo jeansa – preverjen s posnetkom (03/2026) Opis Na prodaj je JUKI MOL-254, avtomatski stroj za prišivanje pasnih zank, zasnovan za popolnoma avtomatizirano izdelavo zank za pas na kavbojkah, hlačah in delovnih oblačilih. Gre za specializirano enoto za hitro serijsko proizvodnjo, ne za standardni šivalni stroj. Stroj samodejno podaja, reže, pozicionira ter utrjuje (bartack) zanke z dosledno natančnostjo in trdnostjo. Enota je bila uporabljena v profesionalnem okolju tekstilne proizvodnje in se prodaja kot kompletna industrijska delovna postaja. Posnetek delovanja z dne 05.03.2026 Servisiran 27.02.2026 Pripravljen za proizvodnjo Zmogljivost Ciklus približno 1,2 sekunde na zanko Do 2.000–2.500 zank na eno izmeno Sočasno zgornje in spodnje utrjevanje (bartack) Enakomerna simetrija in kakovost utrditev Ključne značilnosti Popolnoma avtomatsko podajanje, rezanje in prišivanje zank Integriran sistem za utrjevalni šiv (bartack) Pnevmatski sistem za rokovanje z materialom Digitalna upravljalna plošča JUKI Prilagodljive nastavitve velikosti zank Zanesljivo delovanje na težkih tkaninah, kot sta jeans in delovna oblačila Zasnovan za neprekinjeno industrijsko uporabo Vključno z Enota JUKI MOL-254 Integriran motor in pogonski sistem Pnevmatski sistem Industrijska miza in stojalo Upravljalna plošča za operaterja Cgsdoy Nd Hgjpfx Aguju Nosilec za sukance Tehnični podatki Proizvajalec: JUKI, Japonska Model: MOL-254 Tip: avtomatski stroj za prišivanje pasnih zank Krmiljenje: elektronski krmilni sistem JUKI Pogon: industrijski motor s pnevmatskim sistemom Uporaba: proizvodnja pasnih zank Stanje Rabljeno, industrijsko proizvodno stanje Popolnoma delujoče Servisirano 27.02.2026 Video dokazilo na voljo Običajni znaki uporabe zaradi dela v tovarni Prodaja po načelu videno-kupljeno, brez garancije Uporaba Proizvodnja kavbojk Proizvodnja delovnih oblačil Proizvodnja hlač Avtomatizirane linije za proizvodnjo oblačil Lokacija Valga, Estonija Logistika Kupec je odgovoren za demontažo in transport

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness for coils (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: POWERCONTROL PC23 Power Touch / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin. Retractable stop dogs, spacing (mm): 1000 Csdpsv Rpdnofx Aguegu Side adjustment of aggregate carrier, manual mm 30 – 80: for manual adjustment of workpiece overhang for gluing and finishing section FORMAT PROCESSING (for each side): - Protection cutter (pre-milling) (1 x 4.5 kW) - Chipping unit KD 11 (2 x 6.6 kW) + vacant space EDGE BANDING SECTION (for each side): - Gluing unit (hotmelt glue + pre-melter) A3 + QA65 - Edgeband magazine for coils (slot No. 2) - Edge pressure zone (CNC-controlled) - Type A - End trimming unit PK30 (2 x 0.8 kW), feed speed 30 m/min - Pre-milling unit BF20 (2 x 0.55 kW) - Multi-function unit (radius and contour milling) FF30 + FF32 (4 x 0.4 kW) FlexTrim - Vacant space - Scraper unit PN 20 - Finishing unit (flat scraper + smoothing unit) FA 21. Sprayer unit (for polishing fluid) - No. 3 universal milling unit for grooving/rebating and profiling SF20 (3 x 6.6 kW) (CNC-controlled)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam distance (mm): 400 EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) End trimming unit HL 84 (2 x kW 0.22) Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11 Cgedpfxjp N D Ngs Agueu

Leto izdelave: 2001, stanje: dober (rabljeno), I am selling a wide belt sander Costa SA2 TS 1350, year of manufacture 2001. Configuration: Electronic segmented pad – brush head. Working width: 1350 mm. Abrasive belt dimensions: 1380 x 2620 mm. Pressure rollers for short workpieces. Cedpfx Aog Trufsgusgu Compressed air cleaning for both units. Total weight: 2,600 kg. Main motor: 11 kW. Final cleaning unit with extraction. Including documentation. Condition: good. Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.800 mm, skupna širina: 1.200 mm, skupna višina: 1.250 mm, skupna masa: 560 kg, vhodna napetost: 400 V, vhodni tok: 3 A, vhodna frekvenca: 50 Hz, Three-belt Derinding Machine / Skinning Machine Brand: MAJA Model: BXM 554 Year of manufacture: 2009 Voltage: 400V 50Hz 3.4A Power: 1.25 kW Cgodpfx Agsv Aa Axouou Weight: 560 kg Belt width: 500 mm (3 units) Blade width: 550 mm Dimensions: 2800 x 1200 x 1250 mm

Stanje: rabljeno, Circle Shear with Motor Drive FASTI Type 502 - 10 - 2 Machine No. 9252 009 Year of Manufacture 1992 Material Thickness max. 2 mm (400 N/mm²) Maximum Blank Diameter 1000 mm Minimum Blank Diameter 100 mm Cutter Spindle Speed 60 and 120 rpm Cutting Speed 12 and 24 m/min Blade Mounting Ø 20 mm Blade Diameter Ø 65 mm Throat Depth of Clamping Plate 720 mm Throat Depth of Cutting Wheel 280 mm Motor Power 1.1 / 1.4 kW Power Supply 380 Volt, 50 Hz - 2 motor speeds Cgedpou Rimmofx Aguou - mechanical clamping tip - scale on clamp arm - electric foot switch - 1 set of cutting blades included - operating manual with electrical diagram in PDF format Space Requirement (L x W x H): 1600 x 660 x 1350 mm Weight: 320 kg Good condition

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flow Meter, Pasteurizer A complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with premium pumps, valves, flow meters, and control cabinets. The line is engineered for hygienic and efficient cream pasteurization processes in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Includes various valves and a stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 units) High-quality single seat valves for food applications 4. Flow Meter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm Precise flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, compatible with CIP operations 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Operating Parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system for stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 units) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm Cgjdpfx Asxtu Ugegueu The Alfa Laval / Tetra Pak cream pasteurization line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygienic standards, precise process parameter control, and maximum reliability. Ideal for dairy plants, cream, and milk fat producers.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Alfa Laval / Tetra Pak Buttermilk Pasteurization Line Complete buttermilk pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with a buffer tank, circulation pumps, process valves, flowmeter, and control cabinet. The system is designed for the hygienic thermal treatment of buttermilk in dairy processing plants. Capacity: 25,000 liters/hour Main components of the line: 1. Siersma Scheffers Stainless Steel Buffer Tank Serial number: Karnemelk Year of manufacture: 1995 Capacity: 1,000 liters Overall dimensions: Ø 1100 × 3000 mm Construction: stainless steel (s/s) 2. APV Valves (4 units) High-quality process valves suitable for food applications 3. Pomac Centrifugal Pump, type: CP19555 / 165 x 10 Serial number: 20080 Year of manufacture: 2007 Capacity: 30 m³/h Power: 5.5 kW Dimensions: 700 × 350 × 450 mm 4. Endress + Hauser Flowmeter, model: Promag H / Promag 300 Dimensions: 350 × 200 × 200 mm Provides precise flow measurement of food-grade liquids 5. Samson Valve Dimensions: 560 × 300 × 300 mm Application: flow and pressure regulation within the process system 6. Alfa Laval / Tetra Pak Buttermilk Pasteurizer, type: C8-K8M Serial number: 30107-33855 Year of manufacture: 2012 Capacity: 559 liters Operating parameters: PS: 16.0 bar PT: 22.9 bar TS: 120°C Dimensions: 3200 × 550 × 1850 mm Cgjdsxtvftepfx Agusu High-efficiency heat exchanger system optimized for buttermilk treatment 7. Hovap Centrifugal Pump, type: HP-5032/170 Serial number: 33740 Capacity: 35 m³/h Power: 7.5 kW Dimensions: 700 × 320 × 550 mm 8. IPBE Control Cabinet (s/s) Purpose: operation and monitoring of the buttermilk pasteurization line Dimensions: 620 × 230 × 770 mm The Alfa Laval / Tetra Pak buttermilk pasteurization line, with a capacity of up to 25,000 l/h, is a complete, integrated system for the thermal treatment of dairy products. Utilization of components from Alfa Laval, Tetra Pak, Pomac, Hovap, Endress + Hauser, and APV ensures high reliability, durability, and process quality.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Nadpasovni magnet za iznosni trak LINDNER URRACO 95. Cgjdoxur Itspfx Agusu Dimenzije nadpasovnega magneta: Skupna dolžina: 270 cm, širina traku: 110 cm

Stanje: rabljeno, gluing unit, gluing component, gluing head, heating tank for edge bander, edge banding machine, premelter unit with granulate hopper -with the premelter device, you always have sufficient hot melt adhesive available -manufacturer: ENA Cgsdpsd Dt R Esfx Aguju type: 15-259 electrically heated dimensions: 580/220/H570 mm weight: 18.7 kg

Stanje: rabljeno, Gluing unit, gluing part, gluing head, heated glue pot for edge bander, edge banding machine, pre-melter unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures - Electrically heated - Quantity: 1x glue pot available - The pre-melter ensures that you always have sufficient melt adhesive available - Dimensions: 480/220/H200 mm - Weight: 30 kg/piece Csdpfx Agjb Uhk Ujusgu

Stanje: rabljeno, Gluing unit, gluing assembly, gluing head, heated tank for edge bander, edge banding machine, pre-melting unit with granulate hopper - The pre-melting device ensures a continuous supply of hotmelt adhesive - Manufacturer: ENA - Type: 4-060-15-0600 - Electrically heated - Dimensions: 470/175/H385 mm Codpfx Agsd Dt Rzouogu - Weight: 20.3 kg

Leto izdelave: 2022, stanje: novo, The robotic belt grinding machine is a belt grinder designed for robotic processing, equipped with a contact wheel for grinding parts made from aluminium, steel, brass, and zinc die-cast. Technical Specifications: Contact wheel: max. Ø 400 mm Belt length: 3500 mm Belt width: max. 150 mm Extraction connection: Ø 160 mm Dimensions (LxWxH): 900 x 700 x 1800 mm Cgedpfx Agjgxug Eeusu Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) Spindle diameter: 35 mm Belt grinding unit for belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt break control, 4 kW drive power, frequency-controlled, for contact wheels max. 350 mm Ø x 150 mm, drive and deflection rollers. Equipped with top roller for slack belt grinding.

Stanje: zelo dobro (rabljeno), Rabljeni rezervoar z mešalom / mešalnik za pasto S črpalko / transportno napravo Številka artikla: 10314 Prostornina: pribl. 70 litrov Zadnja uporaba: živilska industrija Tip: stoječe v ogrodju Material (v stiku z medijem): nerjavno jeklo Število pritrditev: 4 Dno: koničasto dno Zgornji pokrov: nagibni pokrov z odprtino za nalivanje Cgsdoxdw Rlopfx Agueu Dimenzije rezervoarja: Notranji premer: 380 mm Zunanji premer: 400 mm Višina nog: 745 mm Razdalja iztoka do tal: 180 mm Skupna višina: 1620 mm Skupna širina: 650 mm Materiali: Notranjost: 1.4301 / AISI304 Zunanji deli: 1.4301 / AISI304 Mešalo: Spiralno mešalo / sidrno mešalo s stenskimi strgali Oprema: Identifikacijska ploščica: ne Iztok: dno ventil Pod rezervoarjem črpalka / transportna naprava Funkcija mešala preverjena, črpalka / transportna naprava ni bila testirana.

Stanje: novo, Leto izdelave: 2025, Stand-alone filling system for pastes and viscous substances into cans, containers, etc. Stainless steel version, operated manually via foot pedal or automatic filling with adjustable speed. Can be operated either with the supplied hopper or by vacuum using a tube from a separate tank. The filler moves inside the container from bottom to top during the filling process. Suitable for various viscous substances (e.g. pastes, creams, ointments). Cgodsv Nk E Repfx Agueu Specifications: Accuracy: +/- 0.5%; max. machine cycle rate (idle): 40 cycles/minute; power supply: 220V, max. 1.0kW. Please note that our new prices are often below the usual used equipment prices. Feel free to inquire and let us know your packaging requirements. Typically, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic multi-lane cup or container filler including film sealing module. Suitable for various container sizes, shapes, and materials (e.g., PP, PS, PET, paper, laminated films, etc.). Perfect for ready meals, noodles, pasta, dried fruits, snacks, candies, chocolate, soup powders, frozen foods, yogurt, ice cream, jam, etc. Fully automatic operation from cup dispensing to filling and sealing. Compatible with all types of (separate) dosing systems for liquids, pastes, granulates, powders, etc. User-friendly operation via touchscreen monitor, stainless steel version, easy to clean. Print mark sensor. Wide product range thanks to an adjustable pocket for the container. - Specifications: Number of lanes: 2; max. machine cycle rate (idle): 40 cycles/minute; power: 220V, 2.1kW; compressed air: 0.2m³, 6bar; machine dimensions: L3000xW850xH1600mm. Cgsdov Nkynopfx Aguju The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. - Normally, 30-50 different new machines are always in stock and immediately available. For custom-built machines, we offer very short delivery times from about 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic multi-lane cup or container filler, including film sealing module. Suitable for various container sizes, shapes, and materials (e.g., PP, PS, PET, paper, laminated films, etc.). Perfect for ready meals, noodles, pasta, dried fruit, snacks, candy, chocolate, soup powders, frozen meals, yogurt, ice cream, jam, etc. Fully automatic operation from cup dispensing through filling to sealing. Compatible with all types of (separate) dosing systems for liquids, pastes, granulates, powders, etc. Easy operation via touchscreen monitor, stainless steel design, easy to clean. Registration mark sensor. Wide range of sizes/shapes thanks to an adjustable cup cavity. - Specifications: Number of lanes: 2; max. idle machine cycle rate: 60 cycles/minute; power supply: 220V, 2.6kW; compressed air: 0.2m³, 6 bar; machine dimensions: L3000xW950xH1600mm. Cgodpfxev Nkyus Aguju The machine/system is also available in further versions for different packaging sizes and speeds. Please note that our new prices are often lower than the usual used prices. Feel free to enquire and tell us about your packaging requirements. - We typically have 30-50 different new machines available immediately from stock. For custom-manufactured machines, we also offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty.