Palete Inverter nakup rabljenega (3.175)

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at wrap start and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop functions, reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program change F02 - Stepless turntable speed adjustment 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage ascent speed from 1.3 to 5.4 m/min F04 - Carriage descent speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 turns) F06 - Number of wraps at pallet top (1 - 10 turns) F09 - Photo eye delay for wrapping height F13 - F16 - Film tension for foot & head wrap / up & down wrap independently adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 savable wrapping programs F01-1 - Cross wrapping (upward/downward) F01-2 - Simple wrapping (up or down only) F01-3 - Push button for manual functions F10-F11 - Wrapping cycle with preset start and stop height F12 - Wrapping to a stored height (deactivates height photo sensor) F22 / F23 - Wrapping cycle for top sheet F29 - Soft start cycle for edge protection placement F30-F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet corners Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manual brake roller adjustment on film carriage Film specification: max. outside diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total output: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Built-in frame Photo sensor for black products Fpedjykuddspfx Ahmeh Cutting device etc. Other units available from stock in Ludwigsburg. Images may show options subject to additional charge.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm – 200mm, for loading with electric pallet truck or forklift – height adjustable Turntable Ø 1,500 mm Fpedpeykuhcofx Ahmoh Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at stretch start and cycle end Emergency stop button in accordance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All machine parameters adjustable via display F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage lift speed upwards from 1.3 to 5.4 m/min F04 – Carriage lift speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Pallet wrap height setting F62 – Ergonomic film change height ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a set height (disabling photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification max. outside diameter Ø 250 mm – core Ø 76mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Other units available from stock at short notice.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm Fodpfx Ahjykub Ajmeph ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Stanje: pripravljen za uporabo (rabljen), Power: 32 kW Fpjdpfx Ahegvl Ubomjh

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Gre za dobro, delujočo linijo za popravilo evropalet z valjčnim trakom, dvema delovnima mestoma, rezkalnikom in kotno žago ter avtomatskim zlagalnikom. Naprava je bila malo uporabljena in je razstavljena na prikolici. Ogled je mogoč po dogovoru. Dodatne slike so na voljo. Fedpfx Ahoy Nl Ryomeph

Stanje: novo, Novo v originalni embalaži Fpjdpox Rcx Refx Ahmsh

Stanje: dober (rabljeno), Leto izdelave: 2012, DVOJNA KABELSKA MIZA ZA PALETE znamke LISOAZ (stroj izdelan na Portugalskem), model DUPLA MMD 1600 Motoriziran bočni preklop palete: za prehod iz območja zabijanja žebljev na eni strani na zabijanje žebljev na drugi strani Fpodszcqcyepfx Ahmoh Motoriziran preklop palete nazaj po končanem delu: za odlaganje na transporter, ki jo bo prenesel na naslednji stroj Motoriziran bočni obračalni mehanizem za zabijanje žebljev na nasprotni strani Izvodi za stisnjen zrak za zabijalne pištole Stroj v dobrem stanju, pripravljen za delo Leto izdelave: 2012

Stanje: zelo dobro (rabljeno), Heavy-duty wooden pallets with 3 runners Accessible from all four sides Length: 1680 mm Width: 1250 mm Board thickness: 45 mm Weight: 82.5 kg Fjdpfx Aol Uvv Tjhmsph Several units available

Stanje: pripravljen za uporabo (rabljen), Année de fabrication : 1988 / Rénové en 2019 par HYDAC Accesoirs avec un système de commande entièrement neuf Fsdsy Hlgpspfx Ahmsph Capacité de charge : 2 000 kg Diamètre de la table : 1 500 mm Largeur de bande : max. 100 mm Épaisseur de bande : 0,3 – 1,0 mm Hauteur maximale de la bobine (palette comprise) : env. 850 mm Nombre de galets de traction : une paire Poids : env. 2 200 kg Dimensions : env. 2 600 x 2 100 x 1 700 mm Exécution : - Châssis en construction soudée robuste - Plaque de pression de bobine - Grand galet de renvoi de bande - Galet de renvoi et galets de traction à réglage hydraulique en hauteur - Galets de traction motorisés avec guidage latéral de la bande et panier à rouleaux - Bouton d'arrêt d’urgence (homme mort) pour l’enfilage de la bande en mode réglage, à vitesse sécurisée - Sens de marche avant/arrière sélectionnable par interrupteur manuel - Force de traction réglable en continu via potentiomètre - Commande de boucle via ... - Armoires électriques autonomes avec organes de commande

Stanje: pripravljen za uporabo (rabljen), 4 uprights, Height: 4.50 m Width: 1.00 m 8 support beams: 3.90 m Fodpsmgb Adefx Ahmoph 2 support beams: 2.80 m 4 support beams: 2.00 m

Stanje: rabljeno, Load capacity at 600 mm load center and lift height 200 mm: 1700 kg Lift height 3100/4316 mm: 1400/960 kg Lift: 4316 mm Fork length: 1150 mm Weight: 1220 kg Fodpfx Aoby D Dkehmeph Required space: 850 x 800/2000 mm

Stanje: pripravljen za uporabo (rabljen),

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Nov Magazin za palete / Dispenzer palet Specifikacije: Nastavljiv dispenzer palet za EURO ali druge tipe palet Maksimalna kapaciteta: do 15 palet Tip palete: širina od 750 do 1200 mm Možna montaža na transportni trak za palete. Glavna napetost: 240V 50Hz Kompresor zraka: 100L-200L Delovni tlak zraka: 6-8 bar Krmiljenje: Delta PLC/HMI Na zalogi: 10 kosov. Fjdpji Hnz Tsfx Ahmoph PROTON EE-ELEKTRONIKA d.o.o

Stanje: rabljeno, Leto izdelave: 1998, Leto izdelave: 1998 Stanje: zelo dobro, popolnoma funkcionalno Fpedeww Harspfx Ahmsh Konfiguracija: - dvigalo za sklad Specifikacije: - največji format: 80 x 120 cm

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Pallet changers and pallet inverters are used to transfer goods between different types of pallets. Goods can be transferred from wooden to plastic pallets, from euro pallets to CHEP pallets, or from euro pallets to Düsseldorf pallets. All types of loads can be transferred, for example, bags, big bags, cardboard boxes, bottles, etc. Capacity 1500 kg Max opening 2200 mm Min opening 820 mm Platform 1200 x 1200 mm Fedjhkzuispfx Ahmsph Power supply 400 V Three Phase ‐ 5.5 kW Rotation movement Hydraulic Control Via push buttons Cycle rate 20 pallets / hour Loading and unloading at ground level using pallet truck

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), EMC line filter Fjdegrhimspfx Ahmoph Brand: Hitachi For frequency inverters Filter for FFFB - SJ300- 750/900 HF, L 300, 100 HF For additional data, see image 3 x 220 Amps Length: 1000 mm Width: 300 mm Height: 190 mm

Stanje: rabljeno, Wigo Double-End Tenoner with 3 units per side, complete with inverters. - Circular Saw (right and left) - Spindle Moulder (right and left) - Spindle Moulder (right and left) Maximum working width: 1500 mm Motor power: Fpedjummldspfx Ahmoh Circular saws: 3 kW x 2 Spindle moulders: 5.5 kW x 2 Rotary sanders: 5.5 kW x 2 Feed motor: 4 kW Shoulder width adjustment motor: 3 kW

Stanje: novo, Centre length ----- 750 mm Centre height ----- 125 mm Swing diameter ----- 250 mm Spindle bore ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Motor power ----- 1.1 kW INCLUDES * Delta frequency converter * Automatic longitudinal and cross feed * Thread chasing dial * 3-jaw chuck 125 mm * 4-jaw chuck 125 mm * Faceplate * Fixed steady rest * Travelling steady rest * Riser plate * Rear panel * Box with various tools Fpjdpfeq E I Avox Ahmjh Option * Base cabinet

Leto izdelave: 2008, stanje: skoraj kot novo (rabljeno), Langhammer Roller Conveyor / Pallet Conveyor with Drive and Control Cabinet Year of manufacture: 2008 The roller conveyor system consists of the following conveyor belts/components: 4 x Roller conveyors (driven), 1,500 mm x 900 mm, roller diameter: 80 mm 26 x Roller conveyors (driven), 2,600 mm x 900 mm, roller diameter: 50 mm Fpedpfx Ajfd Hdpohmsh 3 x Roller conveyors (driven), 1,460 mm x 900 mm, roller diameter: 50 mm 3 x Roller conveyors (driven), 1,750 mm x 900 mm, roller diameter: 50 mm 4 x Roller conveyors (driven), 3,950 mm x 900 mm, roller diameter: 50 mm 38 x Roller conveyors (non-driven), 2,500 mm x 850 mm, roller diameter: 60 mm 16 x Roller conveyors (non-driven), 1,250 mm x 850 mm, roller diameter: 60 mm The roller conveyors can be inspected at any time by prior arrangement.

Stanje: novo, Leto izdelave: 2026, LUFT 1000 Screw Compressor with Inverter is a state-of-the-art solution for pneumatic applications, integrating premium-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, and high performance ensure efficient and trouble-free operation. Main advantages of 7.5 kW induction motor with frequency inverter: - Significant energy savings: The inverter allows for smooth and precise speed control of the induction motor. The compressor output is adjusted exactly to the current demand for compressed air, eliminating idle running (where the motor operates but does not produce air), frequent start/stop cycles, and energy losses from blowing off excess air. Depending on the air consumption profile in your facility, energy savings may range from 25% up to 50%. The more variable the air demand, the higher the savings. - Stable system pressure: Continuous speed regulation with the inverter maintains a nearly constant pressure in the compressed air network, regardless of demand fluctuations. This is crucial for the proper functioning of pneumatic tools and machinery, prevents pressure spikes, and increases process precision. - Reduced inrush currents and electrical load: The induction motor started via the inverter starts smoothly and gradually, eliminating high inrush currents that can load the electrical network and cause voltage drops. This protects the electrical infrastructure and reduces the risk of disturbances. - Extended component lifespan: Smooth operation without sudden starts or stops significantly reduces mechanical stress on the screw block, bearings, coupling, and the motor itself. This results in a longer compressor lifespan and lower service and spare parts costs. - Quieter operation: When operating at lower speeds (with lower demand), the compressor generates less noise, improving acoustic comfort in the workplace—a significant benefit for operators and the surrounding environment. - Greater flexibility and adaptability: The inverter-equipped compressor efficiently handles a wide range of compressed air demand, making it perfect for companies with fluctuating air consumption throughout the day, week, or month. - Advanced control and diagnostics: The inverter integrates with modern control panels, providing extensive parameters monitoring, error diagnostics, remote control, and maintenance scheduling. This gives users full control and system optimization for compressed air. Technical specifications Motor power: 7.5 kW Voltage: 400V/50Hz Capacity 0–6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 930 L/min Outlet diameter (G): 1/2" Dimensions: 810 x 610 x 850 mm Weight: 160 kg Fsdpfx Ajmqlhvehmeph

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), For sale: a Nissan electric pallet stacker, 2-ton lifting capacity, 215 mm lift height, complete with charger. Operating hours: 1,571 h. Fjdpfjd Hh T Rox Ahmsph

Stanje: novo, Leto izdelave: 2026, Set including LUFT 1500 screw compressor with inverter, vertical air receiver with compressed air fittings, 1000-liter capacity, and IZBERG N20S dryer. The LUFT series screw compressor by the Polish brand CORMAK features the latest solutions in pneumatics combined with high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust design, as well as high performance, guarantee efficient and trouble-free operation. Fpodoxnyhuepfx Ahmeh Technical specifications LUFT 1500 INVERTER: - Motor power: 11 kW - Voltage: 400V/50Hz - Output at 0-6 bar: 1620 L/min - Output at 6 bar: 1580 L/min - Output at 8 bar: 1350 L/min - Output at 10 bar: 1230 L/min - Outlet port diameter (G): 1" - Dimensions: 1170 x 730 x 1020 mm - Weight: 243 kg Technical specifications IZBERG N20S: - Inlet/outlet diameter (BSP): 1" - Max. working pressure: 10 bar - Max. inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Capacity: 2800 l/min - Power: 0.58 kW - Power supply voltage: 230 V - Dimensions (L x W x H): 420 x 700 x 690 mm - Weight: 37 kg - Refrigerant type and amount: R134a, 550 g Technical specifications VERTICAL RECEIVER 1000L: - Weight (kg): 230 - Number of ports: 6 - Port size: 2", 1/2" - Size: 230 x 80.8 cm - Tank capacity (l): 1000 - Working pressure (bar): 11 - Wall thickness (mm): 4 - Diameter (mm): Ø 808 - Height (mm): 2300

Stanje: zelo dobro (rabljeno), We are offering a gravity pallet conveyor for sale. The roller conveyor system is used but in very good condition. Total length approx. 8100 mm (3 modules each 2.7 m) Fjdei A Iu Hopfx Ahmoph Roller width: 850 mm Frame width: 930 mm Pallet weight up to max. 1200 kg One module = 2630 mm can also be used for pallet flow racking Height-adjustable feet Price for 1 module (2630 mm) with brake roller: 400 Euros net More than 180 units in stock. Other configurations available. Easy assembly.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), FOR SALE: High-performance palletizer by CHRONOS RICHARDSON, model 14800, year of manufacture 2012. The power and control cabinet underwent an upgrade in 2021, during which new YASKAWA inverters were installed and the control software was updated. Control system: SIEMENS S7 CPU PLC. Fodpfxondcwxe Ahmjph A video of the machine in operation is available upon request for interested parties. Documentation and equipment: - Complete set of documents, including electrical diagrams, CE conformity certificate, as well as source files of the control software and a backup of the control program. Condition and maintenance: The machine is in continuous operation and will be available for dismantling at the end of November. During this period, inspection and functional test of the machine in operation can be arranged. The unit is serviced regularly and maintained in excellent technical condition. Specifications – performance: Capable of handling approximately 1,000–1,200 bags per hour, depending on palletizing pattern, bag size, and the number of bags per layer, etc. We can also arrange transportation and/or install and reprogram the software via our technician, tailoring the palletizer’s operation to specific customer requirements (services available at extra cost). TAGS: palletizer, palletizing robot, bagging, automated palletizing, bagging machine, vertical bagger, horizontal bagger, depalletizer, bulk materials, granulate, pellet, coal, eco-pea coal.

Stanje: rabljeno, Ti regalni sistemi za zlaganje so idealni kot mobilne skladiščne police. Na voljo so v različnih izvedbah in predvsem s prilagodljivo višino. Nakladalna platforma je zasnovana za vse standardne velikosti palet, pa tudi za obsežno ali težje paletirno blago. Višino regalov za zlaganje lahko določite sami, tako da izberete med Fjdpfx Ahjx Ahu Ssmeph