Ott Twister nakup rabljenega (82)

Stanje: zelo dobro (rabljeno), višina obdelovanca (maks.): 60 mm, največja debelina roba: 10 mm, vrsta nastavitve višine: električni, skupna dolžina: 7.200 mm, skupna masa: 3.500 kg, Oprema: CE označba, OTT Robna lepilka tip Twister Hodpfxsy D Sm Rj Agxol Lepljenje/rezanje, poravnalni rezkar, vzdolžno rezkanje, kopiranje vogalov AKF, strgala R2/R1 mm, površinska strgala, enota za tekstilne diske. Prostor za utorni agregat. Vse pršilne šobe, ločilna sredstva, drsna sredstva, čistilna sredstva. Beckhoff krmiljenje – individualni frekvenčni pretvorniki! Hitro prestavljanje v vmesnem prostoru. Potiskač ozkih kosov. Predstavitev po dogovoru možna. Stroj je takoj na voljo. Prodaja v območju DACH z garancijo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Edgebander from 2005. This OTT Twister features a hot-melt/cold glue application system and is capable of processing edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses from 8 to 60 mm and offers a feed rate of 14-20 m/min. If you are looking for a high-quality edgebander, you should consider the OTT Twister edgebander we are offering for sale. Contact us for further details. • Glue application: hot-melt/cold glue process; application roller with both synchronous and counter-rotation • Edge thickness: 0.3-10 mm • Workpiece thickness: 8-60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed drive power: 3.0 kW • Feed speed: 14-20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air velocity (minimum): 20 m/s • Compressed air consumption: approx. 300 l/min Processing units / equipment on the machine: • Jointing: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combination hot-melt glue unit: • Removable and interchangeable storage container for EVA, PUR hot-melt adhesive, or cleaning granulate; container volume 2.5 l • AKM (Automatic Edge Magazine): Hedpfx Agoyn I U Rexjl • Automatic edge magazine with optical monitoring for pre-cut edge band strips • End trimming: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush trimming: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided tracing; 2 carbide-tipped reversible knives HF70, Ø70 x 20 x 16, z=4 • Fine trimming (chamfer 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided tracing; 2 carbide reversible knife cutterheads HF70, Ø70 x 20 x 16, z=4 • AWSR (Radius R2–R5): • 2 quick-change sets for finishing cutters, 2 x 0.3 kW; 2 carbide reversible knife cutterheads AR73 x 16 x 16, z=3, R2–R5 • AKF (Copy milling): • Automatic copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment unit • PU kit: • 5-way spray unit (2 x separating agent, 1 x lubricant, 2 x cleaning agent), fine buffing unit with fabric disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display of the heating plates Hjdpfx Aey Egkgogxol Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Hodpfx Ajych Igegxel Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1991, Velikost plošče: 3600 x 1350 mm Skupni pritisk stiskalnice: 160 t Specifični pritisk: 3,5 - 5,0 kg/cm² Maks. delovni tlak: 320 bar Tlačni cilinder: 8 x 90 mm Hod/fi Odprtina: 400 mm Teža pribl.: 8.300 kg Dimenzije: 4130 x 1520 x 2150 mm Preizkušeno delovanje = nove zgornje plošče (zlatno eloksirane) Kraj skladiščenja: Dobavitelj Hsdpfey Hrzmsx Agxel

Stanje: rabljeno, Leto izdelave: 2001, Hrúbka hrany: 0,2 - 6 mm Rozmery obrobku: - Minimálna šírka: 70 mm - Minimálna/maximálna výška: 8 / 42 mm - Minimálna dĺžka pri pásových hranách: 150 mm Posuvná rýchlosť: 12 m/min Valec na nanášanie lepidla Rozmery stroja (d x š x v): 3500 x 900 - 1300 x 1250 mm Hmotnosť: cca 1130 kg Prípojný výkon: cca 6,0 kW, 400 V, 50 Hz Vybavenie: - Dvojité horné pritláčanie s manuálnym nastavením výšky - Automatický zásobník na rolkové hrany do 800 mm priemeru - Rýchloohrevná lepiaca vaňa s nanášacím valcom v súhlasnom aj protibežnom smere - Pneumatické zapínanie a vypínanie všetkých pracovných jednotiek - Pneumatické kapovacie nožnice pre pásové hrany do 3 mm - Manuálne nastaviteľné vodiacie pravítko - Dvojitá kapovacia píla s 2 vysokofrekvenčnými motormi, 0,2 kW, 12 000 ot./min, 2 automatické pozície (0° + 3°) - Orezávacia/zrovnávacia frézovacia jednotka s 2 vysokofrekvenčnými motormi, 0,43 kW, 12 000 ot./min, obojstranné snímanie, s 2 vysokofrekvenčnými hlavami s otočnými nožmi - Rádiusová stieracia čepeľ, automatické podávanie - Plochá stieracia čepeľ, automatické podávanie Hedpfx Agjvvkfqoxsl Miesto skladovania: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Oprema: CE označba, Ott JU 2511 Hydraulic veneer press with electric heating plates Anodized electric heating plates Two-stage hydraulic pump with automatic changeover valve from low to high pressure Safety rip cord Rack compensation CE compliant Pressing area 2500 x 1100 mm Number of pressing cylinders: 4 Total pressing force: 70 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 16.1 kW Hjdpjy Hbw Rofx Agxjl Dismantlable design Required space (L x W x H): approx. 2960 x 1250 x 1955 mm Weight: approx. 2900 kg Year of manufacture: 1998 Price: 6500.- • Subject to technical changes and prior sale. • Stated prices are ex works - loaded, free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines at their location. • Special agreements are only possible in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Hydraulic veneer press with electric heating plates • Bottom-cylinder design • BUSSE electric heating plates Hsdpfeyyn Rdex Agxsl • Central control panel with all operating elements • Analog temperature display for both heating plates • Pressing pressure infinitely adjustable via pressure switch unit • Main switch • Two-stage hydraulic pump with automatic switching valve from low to high pressure • Safety pull cord • Rack compensation • CE compliant Pressing area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirements (L x W x H) approx.: 2900 x 1250 x 1900 mm Weight: approx. 3,800 kg More information on request NEW MYLAR FOIL on both heating plates NEW Hydraulic cylinder seals Used machine notice: • Subject to errors in technical details and prior sale. • Prices stated are ex works – free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no claims to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, OTT MEGAtronic 111 Širokopasovni kalibracijski in fini brusilni avtomat 1. Brusilna enota s kalibracijsko valjčno enoto 2. Brusilna enota z elektronsko krmiljeno segmentno brusilno nogo Delovna širina 1100 mm Podajalna hitrost 5 + 10 m/min Moč motorja brusilne enote pribl. 11 kW Stroj je SERVISIRAN v delavnici Hjdpfx Aoyw Rknsgxsl Na zalogi v Liebochu

Stanje: dober (rabljeno), Leto izdelave: 1968, Funkcionalnost: popolnoma funkcionalen, Tiskalni format: 2550 × 1350 mm Pritisk: 80 t Odpiranje: ca. 400 mm Ogrevanje: električno, ca. 10–24 kW Priklop: 380 V Teža: ca. 4 t Izvedba: elektrohidravlična, 4 cilindri Masivna izvedba Hjdpfxoyu Sifj Agxsl Idealno za furnirska dela in lepljenje plošč Plošče z zlato eloksacijo Od prevzema na lokaciji Stroj je glede na starost v dobrem in vzdrževanem stanju. Robustna industrijska kakovost – dolgotrajna in zanesljiva. Dostava je možna z doplačilom!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1965, Funkcionalnost: popolnoma funkcionalen, Furnirna stiskalnica JU 60 Hodpfx Agjmhguajxjl Mera stiskalnice: 2200 x 1200 mm Grelec poškodovan (glej slike), grelec deluje Leto izdelave: 1965, ogrevanje 12 kW Dodatni stroški nakladanja (najem viličarja cca 500 €) Prevoz možen za doplačilo!

Stanje: rabljeno, Delovna širina 750 mm Delovna dolžina 3.000 mm Dolžina ~ 3.850 mm Širina ~1.000 mm Hedpfx Aey Erymogxsl Višina ~ 2.000 mm Hidravlična furnirna stiskalnica Ott tip 300 K75 za lepljenje furnirjev, lesa, nosilcev ali drugih stiskalnih nalog. Grelne plošče niso funkcionalne.

Stanje: rabljeno, OTT Tornado FÜ + PU SPS-Comp. krmiljenje, 7" TFT barvni zaslon na dotik CM-CombiMelt za EVA in PUR talilna lepila Enota za predrezkanje - spajanje Popolnoma avtomatski valjčni magazin Popolnoma avtomatski magazin za robove Pnevmatsko poravnavanje 0-3° Poravnalno rezkanje - 12 mm Radialno rezkanje R-2, R-5 Posnemanje robov 0°/15°/30°/45° Hjdjywuvnspfx Agxjl Zaobljanje vogalov Radialni strgalnik Površinski strgalnik Zvočno izolirana kabina z odsesavanjem Čistilni komplet s štirikratno pršilno napravo, finim polirnim strojem in pršilno napravo za mazivo Prva dostava 2006 Stroj je DELOVNO PREVERJEN, v VRHUNSKEM STANJU Na zalogi v Lieboch

Stanje: rabljeno, Leto izdelave: 1978, rabljeno Proizvajalec Ott Tip JU60 Leto izdelave 1978 Št. stroja 10838 GS-preverjeno Velikost plošče 2200 x 1100 mm Odpiralna širina 300 mm Tipkrmiljenje Varnostna vrvica Električno ogrevanje Premer bata 80 mm Hodpfx Agoy H N Tgjxel Podbati 4 kosi Prostorske potrebe pribl. 2600 x 1300 x 1900 mm Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nezapakirano Predaja v obstoječem stanju, kot je bilo vidno, brez garancije ali jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! Hjdshy Tlrjpfx Agxel • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Edge cutting device Hodswiwnqjpfx Agxel Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Hedpfx Agelc Ewiexjl Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Hodpfx Agoxgpaqsxjl Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Hsdpfefbr S Rex Agxol Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: rabljeno, stiskalna sila: 100 t, širina mize: 1.350 mm, dolžina mize: 2.550 mm, skupna dolžina: 3.150 mm, skupna širina: 1.550 mm, skupna višina: 2.150 mm, skupna masa: 5.000 kg, No. 04525 Veneer Press Ott 300 K 2513 Used Very robust design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Panel dimensions: 2550 x 1350 mm (L x W) Total pressing force: 100 tons Heating: electric, replaceable heating elements Heating plates made of solid aluminium, covered with Mylar film Maximum temperature: 150°C Specific pressing pressure: 3.0 - 5.0 kg/cm² 4 press cylinders, each with 90 mm diameter Rack and pinion guide for press table Push-button operation for opening - closing - stop All-round emergency pull-cord with two-hand control setting Infinitely variable opening up to approx. 420 mm Automatic pressing pressure control via high-pressure manometer Hodpfx Aey Aplzogxel Pressure preset table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm (L x W x H) Weight approx. 5000 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended The sale takes place as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Stanje: dober (rabljeno), Leto izdelave: 2002, Edge banding machine with jointing milling unit; otherwise fully equipped. PU glue can be used. Hjdpfxegmn H As Agxol

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, OTT Tornado FÜ + PU SPS-compatible control, 7" TFT touch color display CM-CombiMelt for EVA and PUR hot-melt adhesives Pre-milling unit - edge jointing Fully automatic roller magazine Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush milling - 12mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper Surface scraper Soundproof enclosure with central extraction Cleaning set with 4-way spray unit, fine buffing device, and glide spray unit First delivery in 2006 Machine is WORKSHOP TESTED and in TOP CONDITION The gluing unit has recently been completely serviced and all wear parts replaced Technical Specifications: Edging thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed rate: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Hodjv Sm Hcopfx Agxel Corner copying unit Scraper Buffing unit Triple sprayer Total power: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Immediately available -

Stanje: rabljeno, širina mize: 1.400 mm, dolžina mize: 2.800 mm, skupna dolžina: 6.600 mm, skupna širina: 2.500 mm, skupna višina: 2.600 mm, No. 3266 Throughfeed Veneer Press Ott D 99 Used Short-cycle throughfeed veneer press Press area: 2600 x 1400 mm (L x W) Maximum opening width: 150 mm Specific pressing pressure: 5.0 - 6.0 kg/cm² Infeed conveyor belt, length: 2800 mm Outfeed conveyor belt, length: 2800 mm Transport dimensions approx. 6600 x 2500 x 2600 mm (L x W x H) Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and installation Dismantling, loading, and transport by us possible as an option Description and price subject to change without notice To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended The machine is sold as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the principle of "sold as seen" applies Pictures and videos serve as examples and do not necessarily represent the actual scope of delivery Hsdpfx Asy A Rhkegxsl Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery conditions: ex location

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Abrasive belt dimensions: 2150 x 1120 mm, abrasive belt speed: 18 m/sec Feed speeds: 4 + 8 m/min Sanding unit motor power: 11 kW, thickness adjustment: 0.55 kW, feed belt: 1.3/1.8 kW Operating pressure: 6 bar, air requirement: 10 l/min, extraction ports: 1 x 150 + 1 x 120 mm Dimensions (W x D x H): 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore Hodoy Icnaspfx Agxol - Air sanding pad with automatic engagement and disengagement - Rigid sanding pad for solid wood frame sanding - Brush roller driven by sanding unit - Automatic centering of feed belt - Feed belt with high-quality rubber perforated surface and automatic belt centering - Pneumatic belt tensioning with length compensation - Non-contact electronic abrasive belt oscillation - Low-wear disc brake system for immediate stop of sanding belt drive with pressure monitoring - Motorized thickness adjustment with digital display - Workpiece thickness limitation at the infeed - Semi-automatic workpiece thickness adjustment - Grit-to-thickness compensation for contact roller, 4-fold Optional accessories: - Workpiece thickness measuring device

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, skupna masa: 2.000 kg, Edge banding machine, manufactured in 2000. This OTT Pacific V6-F offers an edge thickness range of 0.2 - 6 mm and can process workpiece thicknesses from 8 to 42 mm. It operates at a feed speed of 12 m/min and is equipped with various processing units, such as jointing units, a gluing unit, and a polishing unit. If you are looking for a high-quality edge banding machine, consider the OTT Pacific V6-F that we have for sale. Please contact us for further details. • Condition: Not refurbished – sold without warranty • Edge thickness: 0.2-6 mm Hjdpoy Df Uujfx Agxsl • Workpiece thickness: 8-42 mm • Workpiece width: min. 70 mm • Workpiece length: min. 150 mm • Feed speed: 12 m/min • Electrical connection: 3 x 400 V, 50 Hz • Extraction connection: 2 x Ø 120 mm at 20 m/sec • Extraction capacity: 30 m³/h Processing units and features (part of the machine): • Jointing units: 2 x 1.5 kW, 12,000 rpm, 200 Hz; two application-controlled working spindles • Gluing section: Quick heat-up tank with Melt-matic; automatic edge magazine with optical monitoring (for pre-cut edge banding) • Release agent spray system • End trimming unit: 2 x 0.2 kW, 12,000 rpm, 200 Hz; automatic swiveling 0°/3° • Flush milling unit: 0°/15°/30°/45°; 2 x 0.43 kW, 12,000 rpm, 200 Hz • Radius milling unit: R2-R5; 2 x 0.3 kW, 12,000 rpm, 200 Hz • Corner rounding unit: 2 x 0.3 kW, 12,000 rpm, 200 Hz • Quick-change stations: 2 for milling units • Scrapers: 2 x carbide scrapers • Polishing unit: 2 x 0.2 kW, 2,800 rpm, 50 Hz Additional equipment • None included or specified beyond the devices and functions built into the machine.