Orodje Omarica S Predali nakup rabljenega (83.832)

Stanje: novo, ATEX version Gear-driven radial fan Filter cartridges made of antistatic aluminized polyester Cells with outlet acrylic filter Dust collection drawers for manual emptying Control panel IP55 Scratch-resistant work surfaces Compressed air filter cleaning system Galvanized design Noise level 78 dBA Foldable side and rear walls (rear wall with extraction function) Working area: 2500 x 800 mm Working height: 930 mm Incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow: 5400 m³/h Number of filter cartridges: 4 Filter cartridge diameter: 320 mm Filter cartridge length: 600 mm Total filter surface: 34.8 m² Noise level: 78 dBA Gbsdpfxeh Ucqtj Anfjl Compressed air: 5–7 bar Note on used machinery: • Specifications subject to change and prior sale. • All prices are ex works, loaded free of charge at site. • The machines have been cleaned and function tested. • All machines are sold as inspected, with no guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Simple operation. The perfect solution for industrial and craft businesses. Outstanding compressed air quality. Integrated refrigeration dryer. Sound-insulated screw compressor with V-belt drive mounted on a 270 l air receiver, featuring an integrated refrigeration dryer, built-in cyclone separator, electronic condensate drain, and graphic C55 controller. Detailed specifications: Compression system: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt-driven Control: Fixed speed Controller: Aircontrol 5.0 Refrigeration dryer: Integrated, refrigerant R513A Filtration: Including cyclone separator Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Free air delivery at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min./max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 10.2 kW Motor rated power; IP55: 7.5 kW Oil volume: 4 l Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Gbodjixt H Nopfx Anfsl Air receiver capacity: 270 l

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Gbjdpfx Aexqggconfol Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Calibration and fine sanding machine with 1 sanding unit, 1 motor, top-side processing Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed rates: 5.5 & 11 m/min 1st Unit: Combination unit, rubber-coated sanding drum, 90 Sh / pneumatic sanding pad Sanding pad NEW Gedpfxoudxchs Anfjbl 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Dimensions (approx. L x W x H): 1385 x 1980 x 1900 mm Weight: approx. 1,800 kg Automatic workpiece thickness adjustment with digital display Sanding belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 outfeed rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago OVER 30 WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical data subject to change and prior sale. • Prices quoted are ex location – free loading. • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our premises. • Special agreements only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Gbsdpetwzyfefx Anfjl Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Gbodpfjitvkuox Anfel Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Gsdpfx Anehtuvrjfsbl Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: zelo dobro (rabljeno), Strapping Machine SIVORON / GIGANT Model S 669 L - Integrated strap spool - Strap width: 6 / 9 / 12 / 15.5 mm Godpfx Aouxm Haenfsbl - Electrical connection: 230 V, 50 Hz - Adjustable strap tension - Heat-sealing system - Idle rollers in worktable - Mobile with swivel castors Dimensions (L x W x H): 1460 x 600 x 1600 mm Weight: approx. 70 kg Note on used machines: • Technical details and interim sale subject to change and errors excepted. • All prices quoted are ex works – loading free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Work table dimensions: 600 x 520 mm Work table height: 900 mm Gjdpfx Anjdibw Asfsbl Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Drive: • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • 10.4" touch screen display • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. Gsdpfx Anjd E Ixzsfsbl (We will only respond to inquiries including your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Cleaning agent spraying unit Glue joint scraper FA20 BASIC Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Gjdpjxwuryefx Anfjbl Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Stanje: novo, Leto izdelave: 2024, Naprodaj je nova formatna krožna žaga Felder K540S z višino reza do 140 mm. Godpfxsy R N Aps Anfobl Stroj je razstavljen v našem razstavnem prostoru in je zato kot nov (polna garancija). Tehnični podatki: - Višina reza 140 mm - Žagin list D= 300-400 mm - Motor 5,5 kW / 7,5 KM - Formatna drsna miza X-Roll, dolžina reza 2800 mm - Paralelni rez 800 mm - Podaljšana miza 1300 mm - Dolžinski prislon na podaljšku 2600 mm - Vodilo s segmentnim nagibanjem "Easy-Glide" - Zgornje zaščitno ohišje v skladu s CE - 3x 400 V / 50 Hz Stroj je na voljo v A-5431 Kuchl in ga lahko kadarkoli ogledate v času naše odprtosti. Vmesna prodaja pridržana! Sorodni pojmi: formatna žaga, formatirka, krožna žaga, mizarska žaga, stroj za obdelavo lesa, Felder Referenca: R-A0117

Stanje: rabljeno, prevoženi kilometri: 362.034 km, moč: 155 kW (210,74 KM), prva registracija: 04/2017, vrsta goriva: dizel, lastna masa: 6.930 kg, največja dovoljena obremenitev: 4.985 kg, skupna masa: 11.990 kg, vrsta prenosa: mehanski, emisijski razred: Euro 6, skupna dolžina: 2.550 mm, skupna širina: 3.600 mm, skupna višina: 9.060 mm, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.400 mm, Oprema: ABS, centralno zaklepanje, registracija tovornjaka, sistem za imobilizacijo, spojler, tempomat, zavorni sistem na stisnjen zrak, Mercedes Atego | Dimenzije tovornega prostora: dolžina 7,20 m, širina 2,48 m, višina 2,40 m | 18 palet. | Oprema: 2-osno podvozje 4×2, klimatska naprava, tempomat, ABS/ASR, potovalni računalnik, centralno zaklepanje, električni pomik oken, vlečna kljuka. | Pridržujemo si pravico do napak, sprememb in predhodne prodaje. Gedjy Ru R Sjpfx Anfjbl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, 🚀 GEDA 500 Z/ZP – VERTIKALER BAUAUFZUG / TRANSPORTPLATTFORM Gebraucht, Baujahr 2016 – komplett generalüberholt bei GEDA Deutschland – zahlreiche Neuteile! Garantie: ORIGINAL-WERKSGARANTIE – 12 Monate 🏗️ FÜR DEN TRANSPORT VON PERSONEN UND MATERIAL – PROFESSIONELLE LÖSUNG FÜR BAUSTELLEN Der GEDA 500 Z/ZP ist ein vielseitiges Doppel-Lösungssystem: Er kann sowohl als Materialaufzug als auch als Transportplattform für Personen und Lasten eingesetzt werden. Dank des dualen Steuersystems bietet er maximale Flexibilität, Sicherheit und effiziente Arbeitsgeschwindigkeit. Die Hubgeschwindigkeit beträgt bis zu 24 m/min im Materialmodus und 12 m/min im Personenmodus – so ist ein schnelles und sicheres Arbeiten selbst auf anspruchsvollsten Baustellen garantiert. Die kompakte Bauweise, großzügige Plattform und Anpassungsfähigkeit machen dieses Modell ideal für Gerüstbau und Arbeiten an mehrgeschossigen Gebäuden. ⚙️ TECHNISCHE DATEN Hersteller: GEDA (Deutschland) Modell: 500 Z/ZP Baujahr: 2016 Garantie: 12 Monate (rundum generalüberholt bei GEDA Deutschland) Zahlreiche Neuteile Antrieb: 3,0 / 6,1 kW / 400 V Max. Förderhöhe: 100 m Tragfähigkeit: 850 kg (Material) / 500 kg (Personen) Hubgeschwindigkeit: 24 m/min (Material) / 12 m/min (Personen) Plattformmaße: L 1,6 m × B 1,4 m × H 1,1 m Mastsystem: GEDA UNI-X-MAST Zustand: technisch & optisch – AUSGEZEICHNET 🧰 ZUBEHÖR FÜR FÖRDERHÖHE BIS 25 m Zubehör für größere Höhen auf Anfrage verfügbar. Stahlmastsegmente 1,5 m – 17 Stück Mastverankerungen – 6 Stück Kabelführungsschlitten – 6 Stück Kabel für Förderhöhe bis 50 m Alle Aufzüge sind in Deutschland generalüberholt, geprüft und sofort einsatzbereit. +++JEDER GEDA 500 Z/ZP WIRD MIT ORIGINAL-WERKSABNAHMESCHEIN GELIEFERT+++ Gedpfx Asxvyi Ujnfebl 💡 WEITERE INFORMATIONEN ✅ 12 Monate Garantie ab Kaufdatum ✅ GEDA Qualitäts- und Sicherheitszertifikat ✅ Bedienungsanleitung in Kroatisch, Deutsch und Englisch verfügbar ✅ Plattform um 90° drehbar – einfaches Be- und Entladen ✅ Minimaler Platzbedarf und schnelle Montage ✅ Verschiedene Plattformausführungen – mit Türen und Klappmechanismen – für jede Baustellenanforderung individuell anpassbar 🆕 NEUE GEDA AUFZÜGE UND KOMPLETTE AUSRÜSTUNG VERFÜGBAR Neben überholten Gebrauchtmodellen mit Garantie bieten wir auch neue GEDA Aufzüge, Transportplattformen und Zubehör an: Aufzüge für Material und Personen Vertikale und geneigte Baustellenaufzüge GEDA-STANDARD 200KG, COMFORT 250KG & FIXLIFT 250KG – 2 HUBGESCHWINDIGKEITEN Alle neuen und generalüberholten GEDA-Aufzüge werden mit vollständiger Werksgarantie geliefert, sofort verfügbar – mit Service und Support in Kroatien. DIREKT VOM GENERALVERTRETER – IHR GEDA-PARTNER IN KROATIEN SEIT ÜBER 30 JAHREN. Spezialisiert auf Verkauf, Vermietung, Service und Generalüberholung von GEDA Liften, Aufzügen und kompletter Ausrüstung.

Stanje: rabljeno, Stroj za upogibanje armaturnih palic, Upogibalec armaturnega jekla, Pedax Special 32 S, Rabljeni stroj Proizvajalec: Pedax Tip: Special 32 S Gbodpoy R A Sdofx Anfel Skupne mere: Širina: 1090 mm Globina: 720 mm Višina: 850 mm Teža: 391 kg Električni podatki: 400 V; 6 A Največji premer upogibanja: Ø 32 mm (posamezna palica, za jeklo razreda 450 N/mm²) Nastavitev upogibnega kota: Sistem neskončne nastavitve z diskom Nadzorni sistem: Upravljanje z nožnim pedalom

Stanje: pripravljen za uporabo (rabljen), Transportni trak za odrezke, Knoll 320 s-1/200, rabljeni stroj Proizvajalec: Knoll Tip: 320 s-1/200 Leto izdelave: 2015 Skupne dimenzije: 6200 x 1310 x 1610 mm Dimenzije traku: 500 x 1400 x 4700 mm Gbodpswmmltefx Anfol Razmak lamel: 315 mm

Stanje: pripravljen za uporabo (rabljen), Transporter za ostružke, transporter za odpadni material, Knoll 320 S-1/200, Rabljeni stroj Proizvajalec: Knoll Tip: 320 S-1/200 Skupne dimenzije: Širina: 6200 mm Globina: 1300 mm Višina: 1610 mm Specifikacije traku: 480 x 130 x 60 x 310 mm Hitrost traku: 1,8 m/min Leto izdelave: 2015 Velikost izhodne odprtine: 550 x 530 mm Odprtina zalogovnika: 3120 x 410 mm Gsdpfxextwqds Anfobl Razmak lamel: 315 mm

Stanje: pripravljen za uporabo (rabljen), T-spojni montažni stol, T-spojna miza, varilna miza s T-utori, rabljeni stroj Skupne dimenzije: Dolžina: 740 mm Gbsdpfsv Il Evjx Anfol Širina: 550 mm Višina: 540 mm Teža: 398 kg Dimenzija T-utora: 50 x 20 mm Delovna površina: Zgornji del: 660 x 550 mm Stranski del: 650 x 400 mm Delovna miza nagibna do 90˚

Stanje: pripravljen za uporabo (rabljen), T-utorna miza, delovna miza s T-utori, pritrdilna miza s T-utori 3000 x 1750 mm, rabljeni stroj Skupne mere: 3000 x 1750 x 350 mm Gbsdpsv R Dqvjfx Anfjl Dimenzija utorov: 65 x 27 mm Teža: 3500 kg

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 5801, Stroj za vrtanje in rezanje pločevine FDB 600, Stroj za obdelavo pločevine Peddinghaus FDB 600 iz serije Peddimat je primeren za avtomatizirano vrtanje in avtogeno rezanje ravnega jekla in jeklenih plošč v jekleni konstrukciji. CNC krmiljenje: SIEMENS SINUMERIC Premer vrtanja: min. Ø 8 mm, maks. Ø 40 mm, notranji hladilni sistem za vrtanje Godpfsibq Itex Anfobl Število vrtalnih agregatov: 3 kosi Rezkalni sistem: Avtogena oprema za rezanje Skupna priključna moč: 30 kW Največja višina obdelovanca: 600 x 50 x 6000 mm Minimalna velikost materiala: 80 x 8 mm Debelina pločevine – min.: 6 mm Debelina pločevine – maks.: 50 mm Dimenzije stroja pribl.: 2,4 x 2,4 x 2,8 m Dovodni valjčni transporter: 6 m Izhodni valjčni transporter: 1 m Teža stroja pribl.: 6,5 t

Stanje: pripravljen za uporabo (rabljen), Brusilnik orodij, brusilnik svedrov, Schanbacher S3-50 Proizvajalec: Schanbacher Tip: S3-50 Leto: 2012 Dimenzije: 460 × 600 × 1260 mm Premer svedra: 3–50 mm; Kot konice: 90°–140° Vključuje: zaščitni pokrov, sistem za odvajanje prahu Gbodpfxex Dbltj Anfel

Stanje: pripravljen za uporabo (rabljen), REMS stiskalno orodje, akumulatorska stiskalnica ACC Li-Ion Plus, rabljeni stroj Proizvajalec: Rems Tip: ACC Li-Ion Plus Skupne dimenzije: Širina: 520 mm Globina: 290 mm Višina: 120 mm Ključne značilnosti: Elektro-hidravlični pogon Stiskalna sila: 32 kN Primerno za cevi in spojke Ø 10–108 mm (v nekaterih primerih do 110 mm) Univerzalni motor: 1850 W Baterija: Li-Ion 14,4 V / 3,0 Ah (tehnologija Li-Ion Plus) Gbjdoxl E Nfepfx Anfsl Multifunkcijska elektronika: mehak zagon, zaščita pred preobremenitvijo, avtomatski povrat (ACC) 360° vrtljiv nosilec za čeljusti Vgrajena LED delovna lučka Ergonomska, lahka zasnova: približno 4,3 kg Stanje: Rabljeno, dobro delujoče. Dodatki: baterija, polnilnik.

Stanje: pripravljen za uporabo (rabljen), Lokalna izpušna enota, odsesovalna naprava za delovno mesto, PlymoVent S-1, rabljena naprava, odsesavanje dima, odsesovalnik prahu, Plymovent Gsdjxa Hldjpfx Anfebl Proizvajalec: PlymoVent Model: S-1 Skupne dimenzije: Širina: 1600 mm Globina: 660 mm Višina: 1510 mm Teža: 103 kg Leto izdelave: 2001 Maks. pretok zraka: 1400 m³/h

Stanje: pripravljen za uporabo (rabljen), Centrifugalna črpalka, vertikalna centrifugalna črpalka, črpalka, Andritz 13,7 kW, rabljeni stroj Proizvajalec: Andritz Tip: HP 50-180.1/2/S Električni podatki: 400V; 27A; 13,7kW Godpjwmb Ebofx Anfsbl Pretok: 42 m³/h Dvižna višina: 80 m Leto izdelave: 2013 Skupne dimenzije: Dolžina: 380 mm Širina: 350 mm Višina: 1080 mm

Stanje: pripravljen za uporabo (rabljen), Centrifugalna črpalka, vertikalna centrifugalna črpalka, črpalka, Andritz 13,9 kW, rabljeni stroj Proizvajalec: Andritz Tip: HP 50-180.1/2/S.15/2 Električni podatki: 400V; 27A; 15kW Pretok: 42 m³/h Dvižna višina: 80 m Leto izdelave: 2015 Gbedjv Dr Hfspfx Anfjl Skupne dimenzije: Dolžina: 380 mm Širina: 350 mm Višina: 1080 mm