Optimum Sm 250 nakup rabljenega (121)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine directly from the manufacturer. Ksdpfeymkbkox Ag Todr F110 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control is distinguished by its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool to tool: 2.5 seconds Travel Paths X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z axis: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Spindle speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Spindle to table distance: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / spacing: 18 mm / 3 / 100 mm Maximum load capacity: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guideways with ball screws for high rapid traverse speeds on all axes Telescopic way covers on all three axes Automatic lubrication Portable electronic handwheel with enabling switch and emergency stop RJ45 port and 230 V power outlet Work light in the machining area Cleaning gun Ball screws and linear guides from THK Chip flushing Cooling at the spindle head (machining area) Electrical cabinet Arm-type tool changer SW24 CE compliant *More options available.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine – direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. • Machine in column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button significantly facilitates program setup • Coolant system with a 70-liter coolant tank • Tool changes carried out automatically or by pressing a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled worktable – large, dimensionally stable, and precision ground for high accuracy • Very generously sized access doors to minimize cleaning and maintenance time • LED machine lamp for complete illumination of the work area • SIEMENS add-on package: material defect liability and free on-site service OSS SINUMERIK 808D • Software package with identical control layout, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoder – no homing required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS add-on package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 • Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical specifications Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 10 kVA Milling table (horizontal) Length: 690 mm Width: 225 mm Distance vertical spindle–table min.: 90 mm Distance vertical spindle–table max.: 410 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 150 kg Accuracy Repeat accuracy: ± 0.015 mm Positioning accuracy: ± 0.015 mm Pneumatic connection Kedpfx Agjymkdxs Tjdr Operating pressure: 6 bar Travel X-axis (automatic): 330 mm Y-axis (automatic): 220 mm Z-axis (automatic): 320 mm Distance spindle–column min.: 280 mm Distance spindle–column max.: 280 mm Vertical spindle Spindle taper: BT 30 Speed range: 10,000 rpm Drive motor power S1 (continuous): 3.7 kW Drive motor power S6-30%: 5.5 kW Drive motor torque S1 (continuous): 24 Nm Drive motor torque S6-30%: 36 Nm Feed rate X-axis: 15,000 mm/min Y-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed motor torque (continuous, S1) X-axis: 3.5 Nm Y-axis: 6 Nm Z-axis: 6 Nm Tool changer Design: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Stanje: novo, Priložnost: stekleni moduli iz švicarske razgradnje, 96 steklenih modulov Kodpfxoyxth So Ag Tjdr

Stanje: novo, Vrtalno-rezalni stroj OPTIMUM OPTImill MB 4 - Razstavni stroj - Ta ponudba se nanaša na paket opreme. V ceno so že vključeni naslednji artikli in možnosti: - Vrtalno-rezalni stroj OPTImill MB 4 Optimum - Podstavek za stroj MSM 3 Optimum Kodpfx Agsu R Tfts Tsdr - Set vpenjalnih tulec MK 4/ ER 32 - M16 Optimum - Set rezkarjev z ravnim steblom HSS IMUM - Precizni strojni primež FMS 100 Optimum - Nov razstavni stroj -

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC ravnoležiščni stružnica Optimum. Premer obdelave nad ležiščem/vozičkom: 280 mm/170 mm, razdalja med konicama: 700 mm, vreteninska odprtina: 27 mm, hitrost vrtenja: 4000 obr/min, hod X/Z: 165 mm/660 mm, pomik X/Z: 2 m/min/3 m/min, število orodnih mest: 4, hod pinole: 85 mm. Dimenzije stroja X/Y/Z: pribl. 2000 mm/750 mm/1550 mm, teža: pribl. 450 kg, krmiljenje: Siemens Sinumerik. Dokumentacija je na voljo. Možen je ogled na lokaciji. Kdsdpfsyyplisx Ag Tor

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is located in the showroom. Optimill F 80 CNC milling machine, directly from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control stands out thanks to its performance, speed, precision, and long service life. • Column-type machine frame made from cast iron for high rigidity • Carousel tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drives on all axes (closed-loop control) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop facilitates program setup • Coolant system with 70-litre coolant tank • Tool change can be performed automatically or at the push of a button (electropneumatic tool clamping) • Massive, precise milling table – large dimensions and precision-machined surface • Large access doors to minimize cleaning and maintenance time • LED machine light for full illumination of the work area SINUMERIK 808 ADVANCED Compact and robust Communicative • Front USB panel (IP65) • Serial interface RS232C • RJ45 Ethernet at the rear User-friendly • Technology-specific keyboard layout • Hard keys with protective membrane Process-safe • LED tool number display • MCP with rotary switch for feed and spindle override Comprehensive package • RJ45 Ethernet port • Prepared for remote maintenance • AST function; enables easy optimization for higher dynamic and accuracy requirements • Absolute encoder / no homing sequence required • Higher accuracy Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X axis 20 m/min Y axis 20 m/min Z axis 20 m/min Electrical data Connected voltage 400 V Line frequency 50 Hz Total power requirement 12 kVA Milling table (horizontal) Length 800 mm Width 260 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 550 mm T-slot size 16 mm Number of T-slots 5 T-slot spacing 50 mm Max. load capacity 200 kg Precision Repeatability ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump motor power 450 W Tank capacity 80 l Kdodsymkcuepfx Ag Tjr Pneumatic connection Operating pressure 7 bar Traverse paths X axis (automatic) 450 mm Y axis (automatic) 260 mm Z axis (automatic) 450 mm Distance spindle – column max. 370 mm Vertical spindle Spindle taper BT 40 Speed range 50 – 10,000 rpm Note on speed range: Maximum continuous spindle speed must be reduced by about 20% for continuous operation Drive motor rated power (S1) 3.7 kW Drive motor power (S6-30% duty) 5.5 kW Drive motor torque (S1) 24 Nm Drive motor torque (S6-30% duty) 36 Nm Feed motor torque X axis (S1) 6 Nm Y axis (S1) 6 Nm Z axis (S1) 11 Nm Tool changer Type: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 7 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for secure workpiece fixation with automatic demagnetizing function • High-quality spindle with precision taper roller bearings • Hardened and ground table guideways • Turcite-B coated counterguides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • Grinding wheel can be dressed directly on the machine using the integrated dressing device • Digital position display • Machine base made from robust, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical axes are backlash-free and self-centering, designed as V- and flat guides • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guideways are finely scraped, ensuring maximum precision for all manual movements • 24 V DC safety electrics • Large, decoupled handwheels on all three axes • Hydraulic lines to DIN EN 853 standard • Grinding accuracy: 0.005 mm • Aluminum oxide grinding wheel, grit 46, suitable for all common steel types • Swiveling control panel greatly facilitates operation • Separate hydraulic unit with heat exchanger prevents vibration and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Fitted with an IE3 motor – significantly lower energy consumption, resulting in substantial cost savings Dimensions and Weight Kdodpfxeymduqj Ag Tor Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load 7.5 kW Connection voltage 400 V Mains frequency 50 Hz Surface Grinding Table Clamping area length 400 mm Clamping area width 800 mm Grinding Wheel(s) Outside diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 rpm Run-out accuracy 0.005 mm X-Axis Feed speed 5 – 25 m/min Included Equipment Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Features Electromagnetic clamping plate Table enclosure splash guard Demagnetizing device Parallel dressing device ✔ Coolant system 125 W Working light LED lamp Leveling feet ✔

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 720050, Ponudba 26083 Tehnični podatki: - Višina konic / razdalja med konicama: 210 / 1500 mm Kdsdpjzc Iycsfx Ag Tjr - Največji premer struženja nad ležiščem / nad prečnim suportom: 420 / 270 mm - Največji premer struženja pri odstranjeni mostni letev: 640 mm - Dolžina mostne letve postelje: ca. 270 mm - Premer vretenaste odprtine: 58 mm - Stožec vpinjala konjička: MK 5 - Pomik pinole konjička: 180 mm - Hitrost vretena: 45 – 1800 min⁻¹ - Podolžni pomiki: 0,031 – 1,70 mm/obr. - Prečni pomiki: 0,14 – 0,784 mm/obr. - Pomik zgornjega suportnega vozička: 128 mm - Pomik prečnega suportnega vozička: 285 mm - Metrski navoji - Colski navoji - Pogon: 400 V / 7,5 kW - Oprema: konjiček, trivrato vpenjalna glava, hitromenjalni nosilec orodij, digitalni prikaz - Potrebni prostor cca: D 2850 x V 1500 x Š 1200 mm - Teža cca: 2000 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. - All linear guides with stainless steel covers - Automatic central lubrication - SIEMENS servo drive on all axes (open-loop control) - Max. spindle speed: 4000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency-stop slam switch. Greatly simplifies program setup - Tool changes by push button - Large access doors to minimize cleaning and maintenance time - Software package 'SINUMERIK 808D on PC' included (practical training software for offline programming and simulation of workpieces on PC; available for free download) SINUMERIK 808D ADVANCED – CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC system. The compact and user-friendly entry-level solution is used for basic milling applications. Features such as simple operation, commissioning, and maintenance make it the perfect foundation for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel with IP65 protection class, the SINUMERIK 808D ADVANCED is ideally prepared for operation in harsh environments. Its compact dimensions make it suitable for installation in smaller machines. INCLUDED - RJ45 Ethernet port - 8.4" LCD color display with 800 x 600 resolution - Remote maintenance ready Dimensions & Weights - Length: approx. 1410 mm - Width/depth: approx. 1372 mm - Height: approx. 2007 mm - Weight: approx. 1000 kg Drilling/Milling capacity - Max. cutter head size: 50 mm - Max. shank cutter size: 25 mm Electrical Data - Connection voltage: 400 V - Network frequency: 50 Hz - Electrical connection - Total connected load: 5 kVA Horizontal Milling Table - Length: 620 mm - Width: 180 mm - Distance vertical spindle – milling table min.: 50 mm - Distance vertical spindle – milling table max.: 295 mm - T-slot size: 12 mm - Number of T-slots: 3 - T-slot spacing: 50 mm - Maximum load capacity: 30 kg Accuracy Kdodpoymkkfefx Ag Tsr - Repeatability: ± 0.02 mm - Positioning accuracy: ± 0.01 mm Coolant/Lubricant System - Coolant pump drive power: 95 W - Tank capacity: 30 l Travel - X-axis (auto): 355 mm - Y-axis (auto): 190 mm - Z-axis (auto): 245 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 4000 rpm - Note: max. spindle speed must be reduced by approx. 20% during continuous operation - Drive motor power S1 (continuous): 1.5 kW - Drive motor power S6-30% (intermittent): 2.2 kW - Drive motor torque S1 (continuous): 9.5 Nm - Drive motor torque S6-30%: 14 Nm Feed Rate - X-axis: 10,000 mm/min - Y-axis: 10,000 mm/min - Z-axis: 10,000 mm/min Feed Motor Torque - X-axis S1 (continuous): 1.9 Nm - Y-axis S1 (continuous): 3.5 Nm - Z-axis S1 (continuous): 3.5 Nm

Stanje: rabljeno, Optimum B32 drilling machine, good condition, including MK4 spindle taper, 225 mm stop, 125 mm quill stroke. Subject to prior sale, price changes, errors, and omissions excepted. Kdedpfx Ajwzzghjg Tsr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 30 – The OPTIMUM Premium NC Surface Grinding Machine with Siemens Touchscreen Panel. • Electromagnetic chuck for securing the workpiece, featuring automatic demagnetization • High-grade spindle with precision tapered roller bearings Kdjdpfsymdtysx Ag Tor • Hardened and ground table guideways • Counter-guides coated with Turcite-B for excellent wear resistance and minimal friction • Grinding spindle equipped with premium precision bearings • Grinding wheel can be dressed directly on the machine using an integrated dressing device • Digital position display • Robust machine base made from torsion-resistant cast iron for maximum rigidity and stability • Play-free and self-centering longitudinal, cross, and vertical guideways configured as V and flat guides • Precision recirculating ball screws • Centrally lubricated guideways and feed screws • All flat guides are finely scraped to ensure the highest precision in all manual movements • Safety circuits operating at 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines comply with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel (grit size 46) suitable for all standard steels • Swiveling control panel for greatly improved operability • Separate hydraulic unit with heat exchanger eliminates vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly lower energy consumption and substantial cost savings Dimensions and Weights Length: approx. 3200 mm Width/Depth: approx. 2200 mm Height: approx. 2100 mm Weight: approx. 3000 kg Electrical Data Total connected load: 6.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping surface length: 300 mm Clamping surface width: 600 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Radial run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Scope of Delivery Unit of measure: piece Packaging unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit size 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetizing function Equipment Electromagnetic clamping plate Table enclosure splash guard Automatic demagnetizing device Parallel dressing fixture ✔ Coolant system: 125 W Worklight: LED lamp Leveling feet ✔

Stanje: pripravljen za uporabo (rabljen), Ponujamo CNC stružnico Optimum. Premer obdelovanca nad strojno posteljo/podreznim sledilcem: 300 mm/200 mm, razdalja med centri: 430 mm, hod osi X/Z: 145 mm/465 mm, hitri hod osi X/Z: 10 m/min/12 m/min, premer obdelovanca za obdelavo palic: 30 mm, premer vretena: 30 mm, največja hitrost vretena: 4000 vrt/min, število orodnih mest: 6, krmilni sistem: Siemens SINUMERIK 808D ADVANCED. Dimenzije stroja X/Y/Z: približno 1655 mm/1590 mm/1955 mm, teža: približno 832 kg. Možnost ogleda na kraju samem. Kdodpfx Agoztdtxs Tor

Stanje: rabljeno, Robustna vrtalna miza Optimum B 23 Pro za vrtanje v les, kovino ali druge materiale, opremljena s hitrovpenjalno glavo. Tehnični podatki: - Vreteno: MK 2 - Priključna moč: 750 W // 400 V // 50 Hz Kodpfx Ajzrytleg Tjdr

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Na voljo je skoraj neuporabljena ploščinska brusilka Optimum. Širina brušenja: 220mm, dolžina brušenja: 470mm, višina brušenja: 350mm, dimenzije mize X/Y: 210mm/450mm, maksimalna razdalja med sredino mize in vretenom: 450mm, dimenzije brusnega koluta X/Y/Z: 200mm/13mm/31,75mm. Dimenzije stroja X/Y/Z: pribl. 1200mm/1450mm/2000mm, teža: pribl. 800kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Kdedsxx Udlspfx Ag Tjr

Stanje: rabljeno, Vrtalno / rezkalni stroj OPTIMUM tip OPTI F 40 E Pomik X: 500 mm Pomik Y: 200 mm Vreteno: premer 80 mm Kdedpjzmx Nbofx Ag Ter Stožec: CM3 Iztek vretena: 120 mm Hitrost vretena: od 95 do 3200 min⁻¹ Dimenzije mize: dolžina 730 mm x širina 210 mm Motor z 2 hitrostma Moč motorja: 1,5 kW Ravno vreteno Križna miza Ročni spust Opremljen z: 1 vrtljivim primežem Napetost: 380 V Dimenzije (D x Š x V): 1200 x 900 x 1400 mm Teža: pribl. 350 kg

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath Kjdpfx Aek Egrpeg Tedr - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 760 mm, pomik osi Y: 430 mm, pomik po osi Z: 460 mm, največja hitrost vretena: 10.000 obr/min, model krmilnika: Siemens Sinumerik 828D CNC, POZOR – Posodobitev opreme: Namesto merilne tipalke RENISHAW je vključen Renishaw nastavitveni merilnik orodij! TEHNIČNE PODROBNOSTI Pomik X-os: 760 mm Pomik Y-os: 430 mm Pomik Z-os: 460 mm Vpenjalno stožčasto držalo: SK40 Hitrost vretena: 10.000 vrt/min Podajalna hitrost: 10.000 mm/min Velikost mize X: 900 mm Velikost mize Y: 410 mm Kdodpszap Dwefx Ag Tjr Maks. teža obdelovanca: 350 kg Število osi: 3 PODROBNOSTI STROJA Krmiljenje: Siemens Sinumerik 828D CNC Menjalec orodij: 24-kratni Pogonska moč: 12 kW Hlajenje orodij skozi vreteno: 30 bar OPREMA Renishaw nastavitveni merilnik orodij Transporter ostružkov

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter guideways for high wear resistance and low friction • Grinding spindle equipped with high-precision bearings • Grinding wheel can be dressed directly on the machine using the built-in dressing device • Digital position indicator • Machine base constructed from rigid, torsion-resistant cast iron for maximum stiffness and stability • Longitudinal, cross, and vertical guideways are backlash-free and self-centering, designed as V- and flat guides • Precision ball screw drives • Central lubrication for guideways and feed screw • All flat guideways are finely scraped, guaranteeing the highest precision for all manual movements • Safety electrical system in 24 V DC • Oversized, isolated handwheels on all three axes • Hydraulic lines in accordance with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swiveling control panel for significantly easier operation • Separate hydraulic unit with heat exchanger to prevent vibration and thermal load • Two-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly lower energy consumption, resulting in considerable cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 phases Current type: AC Network frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Kjdpfxeymdwfe Ag Tedr Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Package Unit: 1 Scope of Delivery Quantity unit: piece Packaging unit: 1 Digital position display Coolant system Balancing mandrel Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetizing function Equipment Electromagnetic chuck Splash guard table enclosure Automatic demagnetizing device Parallel wheel dressing device Coolant system 40 W Work light: LED lamp Leveling feet

Stanje: rabljeno, Leto izdelave: 2014, Izlet 180 mm Hodila pinole 80 mm Neprekinjena moč 20 Kdjdpfxoxbtrgo Ag Tsr Vpenjalo vretena MK 2 Velikost mize 280 x 245 mm Višina stroja pribl. 1000 mm Premer stebra 73 mm Maks. razdalja vreteno/miza 425 mm Dimenzije pribl. 615 x 330 x 1015 mm Teža pribl. 60 kg Vključno s primežem HM Müller HT100P, širina čeljusti 100 mm, vpenjalna širina 80 mm

Stanje: rabljeno, Tehnični podatki: Pomiki X/Y/Z: 700 / 250 / 430 mm Pomik zgornjega vozička: 630 mm Vrtljaji vretena: 45 - 1660 min⁻¹ Vpenjalo vretena: SK 40 Krmiljenje: konvencionalno Pomik mize: 24 - 402 mm/min Glava rezkalnika vrtljiva: 360° Ksdpeyi E Udsfx Ag Tsdr Velikost mize: 1120 x 260 mm Pogon vretena: 2,2 kW Skupna potrebna moč: 2,4 kVA Mere (ŠxGxV), pribl.: 1600 x 1700 x 1700 mm Teža, pribl.: 1200 kg Oprema: - Digitalni prikaz - Strojna svetilka - Naprava za hlajenje - Strojne noge

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, High-quality spindle with precision tapered roller bearings Hardened and ground table guideways Turcite-B coated counter-guides for high wear resistance and low friction Integrated grinding wheel dressing device Machine base made of robust, torsion-resistant cast iron for maximum rigidity and stability Backlash-free V-flat guide on the Z-axis and flat guides on the X and Y-axes Trapezoidal leadscrew on the Y-axis Manual central lubrication All flat guides are finely scraped, ensuring high precision for all manual movements LED work lamp Safety electrical system with 24 V DC voltage Grinding accuracy: 0.005 mm Corundum grinding wheel, grit 46, for all common steels included as standard Dual-channel safety electric system Electromagnetic compatibility (EMC) filter grade Significant energy savings due to IE3 motor Coolant unit with external coolant tank Dimensions and Weights Length approx. 1970 mm Width/Depth approx. 1300 mm Height approx. 1700 mm Weight approx. 850 kg Electrical Data Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping surface length: 200 mm Clamping surface width: 500 mm Grinding Wheel(s) Outside diameter: 200 mm Ksdpsw Eay Iofx Ag Tedr Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: Manual

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Proizvajalec: Optimum Maschinen Germany GmbH Model: L34HS Serijska številka (SN): 11261804002 Tip stroja: CNC stružnica s plosko posteljo Leto izdelave: 2018 Moč motorja: 3,7 kW Napajanje: 400 V / 50 Hz Kdodpfx Ajy Ia Uqsg Ter Območje vrtljajev vretena: pribl. 30 – 3500 vrt/min Maksimalna hitrost vretena: 3500 vrt/min Maksimalni premer struženja: pribl. 350 mm Premer struženja nad suportom: pribl. 146 mm Razdalja med konicami: pribl. 600 mm Pomik osi X/Y/Z: pribl. 185 / 185 / 540 mm Kužel / vpenjanje: MK 3 Teža: pribl. 1200 kg

Stanje: rabljeno, Leto izdelave: 2025, Največji premer reza: 225 mm Dolžina list žage: 2.480 mm Širina list žage: 27 mm Dimenzije list žage: 2.480 x 27 x 0,9 mm Kot rezanja: 0 - 60 ° Hitrost traku: 20 - 90 m/min Delovno območje pri 90° maks.: 225 mm Delovno območje pri 90 stopinjah: kvadrat 190 mm Delovno območje pri 90 stopinjah: ploščat 150 x 245 mm Delovno območje pri 60 stopinjah: okroglo 90 mm Delovno območje pri 60 stopinjah: kvadrat 90 mm Delovno območje pri 60 stopinjah: ploščat 120 x 90 mm Delovno območje pri 45 stopinjah: okroglo 145 mm Kodpfx Ajykb Enog Tsdr Delovno območje pri 45 stopinjah: kvadrat 150 mm Delovno območje pri 45 stopinjah: ploščat 190 x 150 mm Skupna priključna moč: 1,5 kW Teža stroja pribl.: 185 kg Potrebni prostor pribl.: 1,5 x 1,2 x 1,6 m Tračna žaga za kovino OPTIMUM - OPTIsaw S 275 PV

Stanje: novo, Swing diameter 560 mm Turning length 1910 mm Swing diameter over bed slide 355 mm Swing diameter in bed bridge 790 mm Centre height 280 mm Turning length in bed bridge 170 mm Spindle speeds 12 (25-1600) rpm Tailstock taper MK 5 Quill stroke 180 mm Quill diameter 75 mm Spindle mount DIN ISO 702-2 No. 8 Spindle bore 80 mm Spindle taper MK 7 Longitudinal feed 35 / 0.059 - 1.646 m/min Face feed 35 / 0.020 - 0.573 m/min Total power requirement 8.5 kW Machine weight approx. 2,560 kg Space requirement approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty machine featuring high flexibility, precision, and cost efficiency. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideways - Guaranteed spindle nose run-out accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined carriage - All guides adjustable via gib strips - Forward/reverse operation on carriage, switchable via leadscrew - Dual-channel safety electronics - Central lubrication in the carriage - Cross slide adjustment range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, and mounted in 2 adjustable precision tapered roller bearings - Switches with life cycle calculation, tested according to EN ISO 13849 - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - Safety handwheels with disengagement function per EN 23125 on X and Z axes - Gears and shafts hardened and ground, running in precision bearings in oil bath - Clearly arranged selection levers for feed speed selection - Enclosed rapid-change feed gearbox design - Emergency stop slam switch, motor protection switch, lockable main switch - Emergency stop device, foot-operated - Tailstock for taper turning, adjustable ±10 mm Kjdpoucgr Ijfx Ag Todr - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick, easy, and tool-free adjustment using clamping lever - Cable carrier for gentle cable and hose guidance - Heavily ribbed prismatic bed, induction-hardened and precision-ground cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Thread dial indicator scale adjustable Scope of delivery: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MK 7/MK 5 - TH 5620V: Reducing sleeve Ø113 mm / MK 5 - Fixed centre MK 5 - Fixed and revolving centre MK 5 - Quick-change tool post 7-C - Tool holder 32 x 150 type D for square tool bits - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Stanje: novo, Leto izdelave: 2026, Moč: 1,1 kW Vrtalna zmogljivost v jeklu / neprekinjena vrtalna zmogljivost: 30 mm / 25 mm premera Območje vrtljajev: brezstopenjsko 120 - 3000 min⁻¹ Vpenjanje vretena: MK-4 Vrtalni hod: 120 mm Iztek vretena: 254 mm Velikost mize: 475 mm x 425 mm Vrtalna miza nagibna levo / vrtljiva: 45° levo / 360° Premer stebra: 80 mm Ksdpfx Agjzhm D Ae Tsdr Hitrovpenjalna glava: 1 - 16 mm Teža: 132 kg