Optimizacija nakup rabljenega (96)

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Ljdpfx Ajw Sy T Hol Nsaa Location: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2924, Rotary Disc Saw STROMAB CT 600 This is a used optimizing saw in very good condition, equipped with premium accessories (e.g., outfeed conveyor with pneumatic kickers; infeed feed table). Power supply (V): 400 Blade diameter (mm): Ø 600 Year of manufacture: 2009 Type: CT 600 Motor power (kW): 7.5 kW Serial number: 2924 Overall dimensions of the assembly (mm): approx. 16,000 x 2,650 x 1,600 Total dimensions of infeed table (mm): approx. 7,400 x 2,200 x 950 Dimensions of infeed table for material (mm): approx. 6,000 x 1,500 x 950 Dimensions of outfeed table/conveyor (mm): 7,300 × 220 × 1,120 Number of pneumatic kickers on outfeed table/conveyor: 7 units Blade speed (rpm): 2,800 Table swivel range (°): max. ±70 Cutting height at 0°: 160x310 mm, 80x390 mm Cutting height at +/-45°: 160x220 mm, 80x270 mm Cutting height at +/-70°: 160x100 mm, 80x130 mm Saw table rotation speed from 0° to 70°: 3 seconds Dust extraction connections: Ø 100 mm, Ø 120 mm Control and programming unit: ELCO ELETTRONICA Power 1000 Lasdpoy D Sdcsfx Al Nea The original manual is available in both English and Slovak in paper form. For supplementary or additional information, please contact us by email.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Avtomatski stroji za kapanje napak Levi stroj Prepoznavanje oznak Podmizna kapna žaga Preseki lesa glej diagram žage Največja širina lesa: 300 mm Največja debelina lesa: 90 mm Žaga: 7,5 kW Pomik: 6 kW Delovalo 1995–2012, približno 4 ure/dan Lsdpfxskv Untj Al Noaa Opcijsko: Predelava PC krmiljenja na Siemens S7 z zaslonom na dotik

Stanje: novo, Leto izdelave: 2025, Professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material loss. The CROSS CUT 306 optimizer is a new technology in woodworking machinery, manufactured by the leading Polish brand CNC Technologies. The machine enables quick, simple, and precise customized cuts, thereby increasing production efficiency. The optimizer crosscuts the material into sections of a specified length, removes material defects marked with a fluorescent marker, and uses a sensor to analyze the marker's position. It is worth noting that the machine is capable of automatic measuring and cutting cycles. Model: TechnologiesCNC CROSS CUT 306-4M Effective processing length – 4000 mm (optionally 6 m) Effective processing width – 30-230 mm Effective processing thickness – 40-80 mm Effective cross-section processing – 250x30 mm Scanning speed – 80 m/min Ljdpfx Aljtvmv Rs Njaa Scanning device – Infrared sensor from German brand SICK Defect scanning/detection – Fluorescence sensor by SICK (Germany) Table height – 800 mm Feed speed – 60 m/min Push servo drive – AC DELTA 750w Saw stroke servo drive – AC DELTA 1 kW Cut-off saw motor – 7.5 kW, 3Ph, 2930 rpm Cut-off saw diameter – e.g., 500 mm Extraction port diameter: 100 mm x2 Total power: approx. 10 kW Overall dimensions – 6750 x 1450 x 1800 mm Transport dimensions: 535 x 80 x 110 (table), 200 x 100 x 160 (console) Weight: 1436 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Optimizirni stroj Grecon Dimter OptiCut 304R Laodpfxeyxltys Al Noa Minimalna dolžina vhodnega lesa: 900 mm pri nalaganju na prečni verižni transporter Minimalna/maksimalna širina lesa: 40-200 mm Minimalna/maksimalna debelina lesa: 15-80 mm Spust, rezanje in pospeševanje: 0,5 – 1 sek Natančnost reza: najmanj 0,8 mm, največ 1,5 mm Maksimalni preseki lesa: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Premer žaginega lista: 400 x 30 mm Hitrost vrtenja žaginega lista: 4200 obr./min. Maksimalni pomik: 170 m/min Odbiralni tračni transporter s 6 potiskači Načini žaganja: 1. žaganje na fiksno dolžino 2. optimizacija dolžine desk za maksimalni izkoristek 3. odstranjevanje napak v lesu z označevanjem napak s kredo Celotna dolžina linije: 21 m Leto izdelave: 2000

Stanje: rabljeno, Premer žaginega lista tba mm Višina reza tba mm Lajdpfeyw Tluox Al Nea Moč motorja tba kW Krmiljenje tba Optimizacijska prečna žaga Paul tip 17 AP za avtomatsko krojenje in optimizacijo masivnega lesa po vnaprej določenih dolžinah in zaznavanju napak. Stroj povečuje izkoristek materiala in učinkovitost s pomočjo računalniško vodenih rezalnih sekvenc ter je idealen za žage in lesno-predelovalna podjetja s serijsko proizvodnjo.

Stanje: dober (rabljeno), Leto izdelave: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Automatic infeed table / through-feed system Outfeed table 3 ejectors on the left outfeed table Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included. Lsdjt Ir Nqopfx Al Njaa

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, - Model: TRVE 450 - Proizvajalec: Cursal - Leto izdelave: 1993 - Brez oznake CE, saj za stroje tistega časa še ni bila predvidena - Robustna in natančna mehanika, značilna za Cursalovo proizvodnjo - Primerna za hitre in natančne reze masivnega lesa in polizdelkov Ledpfx Aleyu Sx Te Neaa - Popolna z originalno standardno opremo

Stanje: zelo dobro (rabljeno), maksimalna širina reza 250 mm dolžina dovajalne mize 3 m dolžina izhodne mize 3 m leto izdelave 2003 moč motorja cca. 2,2 kW napajanje 400V teža 600 kg Lajdpsyudbgefx Al Noa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 89 mm, največja širina rezanja: 200 mm, Žaga za optimizacijo prečnega reza Lodpfx Alsx H Uaxj Njaa PAUL C11 MKL Leto proizvodnje: 2014 Stroj je opremljen z mersko postajo in 5 izmetalnimi napravami. Tehnični podatki: Višina reza: 3 - 89 mm Širina: 30 - 200 mm Minimalna dolžina obdelovanca: 300 mm Premer žaginega lista: 500 mm Moč motorja žage: 5,5 kW

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 6400 x 1500 x 1780 mm Laodpfx Aswt Ua Eel Nea Total Power Requirement: 19 kW Weight: 1800 kg Optimizing Cross-Cut Saw WINTER QUICK 100 NC - Minimum workpiece length: 300 mm - Minimum / maximum workpiece width: 20–220 mm - Minimum / maximum workpiece thickness: 15–100 mm - Workpiece thickness tolerance: ±3 mm - Max. tolerance per side of workpiece: 10 mm/m - Wood type: soft or hard - Minimum trimming length: 80 mm - Max. feed speed: 180 m/min - Cutting speed: 0.15–0.3 s - Total power: 19.0 kW - Saw motor: 7.5 kW - Feed servomotor: 5.5 kW - Saw stroke servomotor: 4.5 kW - Conveyor belt motor: 0.75 kW - Beam lift motor: 0.37 kW - Extraction diameter: 2 × Ø120 mm - Table height: 900 mm - Overall dimensions: L=6400 mm, W=1500 mm, H=1780 mm - Weight: 1800 kg Standard Features: - Infeed and marking station with servo drive - Infeed conveyor and saw stroke each with individual servo drive - 2.5 m discharge conveyor with fluorescence sensor and ejector - Saw blade with integrated scrap air nozzle - User-friendly 10.1'' TFT touchscreen - Air tank for stable pressing force - Powerful servomotor - Fully enclosed safety guard for quiet and safe operation - Efficient production—can replace 4–8 sets of conventional manual cross-cut saws - Saves labor and floor space - Safe operation - Can be combined with a high-speed four-side planer to form an efficient, automatic production line.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 450 mm, največja višina reza: 100 mm, največja širina rezanja: 200 mm, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2025, For sale: Metal Technika OWD-1600 optimizing cross-cut saw, year of manufacture 2018. The machine is fully operational and ready for work – ideal for fast cutting of components in series production. A major advantage of this machine is the ability to set a cutting schedule for up to 8 positions: you set the dimension and quantity, and the machine automatically performs the cuts, switching to subsequent positions without the need for retooling. Technical data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Max. material width: 200 mm Max. material height: 100 mm Max. board length: 3200 mm Laedpfxsyv Ewme Al Nja Feed rate: approx. 30 m/min Blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine runs very efficiently – for example: - Package of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm each) - Cycle time: about 10 seconds Possibility to inspect and test the machine on site. Location: Elbląg / Warmińsko-Mazurskie If you have any questions, please feel free to contact me.

Stanje: zelo dobro (rabljeno), GreCon Type 2004 Optimizing Cross-Cut Saw with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec. Saw motor: 5.5 kW Saw shaft control: pneumatic Chain drive: servo motor Min. working width: 40 mm Min. infeed length: 500 mm Net weight: approx. 1,800 kg Lasdpfon Hwl Asx Al Nsa Was completely overhauled and then not used again Location: Austria, near Ried im Innkreis

Stanje: dober (rabljeno), Leto izdelave: 2012, Prodajam avtomatsko optimizacijsko kapno žago Salvador Superpush 200, letnik 2012. Samodejna vstopna miza 5,10 m (potisni sistem) Izhodna miza 3,00 m Lsdeyi Suwjpfx Al Noaa Skupna dolžina: 9,00 m Optimizacija z avtomatskim programiranjem rezalnih shem. Takoj na voljo. CE oprema. Dokumentacija vključena.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Hochleistungs-Optimierkreissäge GRECON DIMTER OptiCut S75-4 mit Auskappfunktion. Diese Maschine ist ideal für den präzisen Zuschnitt von Massivholz und verfügt über eine automatische Erkennung und Entfernung von Materialfehlern. Technische Daten: Maximale Vorschublänge: 6300 mm (Schieber) Minimale Schnittlänge: 50 mm Maximale Schnittbreite: 360 x 30 mm / 240 x 160 mm Ljdpjyxwyrefx Al Njaa Maximale Vorschubgeschwindigkeit: 60 m/min Hauptmotor (Säge): 7,5 kW Sägeblattdurchmesser: 400 mm Baujahr: 2001 Drehstrom: 400 V / 50 Hz Steuerspannung: 230 VAC / 24 VDC Nennleistung: 11 kW Sicherung: 25 A Maschinenabmessungen: - Einlauf: L 7600 x B 800 x H 1100 mm - Säge: L 1400 x B 1200 x H 1650 mm - Auslauf: L 5200 x B 600 x H 900 mm Arbeitshöhe gesamt: 850 mm Fehlererkennung: Automatische Identifikation und Auskappung von Holzfehlern (Äste, Risse usw.). Ertragsoptimierung: Softwaregestützte Berechnung zur bestmöglichen Ausnutzung des Rohholzes. Bedienungsanleitung in Englisch und Deutsch sowie Elektroplan im Lieferumfang. Besichtigung im laufenden Betrieb möglich. WHATSAPP-Video auf Anfrage.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, moč: 10 kW (13,60 KM), The automatic optimizing saw SalvaPush_2000 is the result of more than twenty years of experience with wood optimization saws. The operator needs only to mark wood quality and the presence of defects; the rest is handled by the optimizing saw. The machine cuts the best possible combination of dimensions, minimizes waste, and increases productivity, all while maintaining absolute safety. SalvaPush_2000 is a numerically controlled optimizing saw with integrated computer and SALVA-OPTIM software for fast and easy communication. Certain sections of the program are dedicated to statistics and cutting results, with real-time updates and diagnostics. The touchscreen interface with USB and remote service connection allows for easy data reading and input. Lajdpfod Tyf Uex Al Noa By Christian Salvador

Stanje: novo, Leto izdelave: 2025, New optimization saw SALVACUT 5000 from SALVAMAC Innovative high-speed optimizing saw with optimization and removal of wood defects, featuring dual drive with upper rollers and a lower feed belt with independent control. Ledpon E Sl Rofx Al Neaa Based on an idea by Salvador Christian.

Stanje: novo, Leto izdelave: 2025, COST CUTTING OPTIMIZING SAW The Superangle 600 is the ideal cutting centre for angle cuts and optimization tasks. As the direct technological evolution of traditional cutting methods, the Superangle 600 increases productivity, ensures maximum precision, and maintains a process logic that is both simple and flexible. EXTREMELY ROBUST Entirely constructed from thick, reinforced painted steel. Pusher carriage dimensions: 300x345x25 mm. 50 mm wide toothed belt with 33 internal steel inserts. TECHNOLOGICALLY ADVANCED Electronic system consists of a computer directly connected to a state-of-the-art CNC controller. Windows-based software environment. Includes management of five qualities. 22" LED colour monitor. Online teleservice via internet, plus Excel macro integration. FAST Total optic system. Electronic movement driven by brushless servo motor. Lsdpowk E Uuofx Al Njaa Brushless servo motor for angular cutting operations. Adjustable cutting speed. Two pressure arms. RELIABLE AND SAFE Transmission system on double, hardened and ground linear guides. SKF ball bearing carriages with double dust protection and automatic lubrication. Freestanding, electrically separated control cabinet. Independent pneumatic adjustments for various processing types. Maximum safety rear safety guard.

Stanje: novo, Leto izdelave: 2025, Semi-automatic optimizing crosscut saw with electronic positioner, featuring push/stop operation modes COST-OPTIMIZING CROSSCUT SAW Superpush 150 is the entry-level center for cutting and optimization tasks. Designed as a direct technological evolution of traditional cutting methods, it is capable of increasing productivity and yield of the wood material. EXTREMELY ROBUST Heavy-duty, reinforced welded steel frame, fully painted. Horizontal worktable with movable guard for easier loading of workpieces. Carriage acts as both a length stop and pusher. Linear unit with toothed belt featuring internal steel inserts and linear guideways with ball bearings. Continuous horizontal outfeed table, 300 mm wide. TECHNOLOGICALLY INNOVATIVE Electronic system equipped with an integrated CNC and touch screen control panel. Laedpfeg Hzvgjx Al Nja Linux-based software with a customized interface. 15.6'' color resistive TOUCH SCREEN display, ensuring comprehensive safety in industrial environments. Program import via USB. Remote service capability via internet. + Excel Macro support. FAST S4U Lite software Brushless positioner motor with digital servo-driver. Quick selection interface for Stop/Pusher mode. Adjustable cutting speed. RELIABLE AND SAFE Movements with ball bearing slides, featuring dual dust protection. Electrical cabinet free-standing and separate from the machine structure. Independent pneumatic adjustments to accommodate various processing types. Two-hand safety operation for cutting activation. "CE" certified by accredited body – not self-certified.

Stanje: rabljeno, DIMENSIONS: HEIGHT 100 mm Lasdpfx Alsw E Eudj Noa WIDTH 270 mm ELECTRONIC PUSHER LENGTH 6100 mm SAW BLADE MOTOR 4 kW

Stanje: rabljeno, Circular saw blade diameter: 500 mm Max. cutting height: 120 mm Motor power: 5.5/7.5 kW Working length: 4100 mm Salvapush 2000 optimizing cross-cut saw For complete wood optimization and defect cutting Version 4100 (working length) ----- Technical specifications: - Cutting range: min. 30x12 mm, max. 270x120 / 300x95 mm. Optional special cutting ranges on request. - Plate length before cutting: min. 500 mm, max. 4100 / 5100 / 6100 mm, depending on version - Possibility of a single cut in the last 40 mm of the board. Minimum final trim length: 5 mm. - Maximum wood weight: 120 kg (optional special solution on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special working table inclined at 25 degrees for easy loading and to hold the workpiece securely clamped - Double steel frame construction, highly robust, reinforced and painted. - Special rear safety locking device for appropriate occupational safety. Pusher speed up to 60 m/min in compliance with current safety regulations: Carriage travel speed can be set directly from the computer depending on cutting area. Faster version optionally available. - Very sturdy pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminum support is large and solid: height 135 mm, width 120 mm. - Special transmission system with 50 mm wide toothed belt with 33 hardened steel bands inside, ensuring high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Photoelectric laser cell for wood detection, and a luminescence reader for fluorescent markings. System is fixed-position, eliminating manual adjustments when wood thickness changes. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting grades - Robust discharge table for collecting the cut workpieces, made of hard steel, length 3000 mm. Inclined at 25 degrees, same as rest of the conveyor, and complete with guide Ljdpfx Alewhf Ipe Njaa ----- Price of the machine as listed: on request! ----- Optional extras (at surcharge): - Extended discharge (outfeed) table - Gravity preloading system - Zebra label printer - Saw motor upgrade from 5.5 kW to 7.5 kW - Extension of cutting range to 140x240 – 100x300 with circular saw blade diameter 550 mm - Horizontal side discharge - Wide pusher plate Optional alternatives to discharge (outfeed) table: - Version TT: rotary discharge table for full discharge of all cut parts in one cycle - Floor flap for discharge table with rotary function to remove end pieces from trimmed lumber - Version LS: electronic sorting unit For sorting cut pieces by size and grade with 3 high-speed ejectors ----- Prices for the above options: on request! ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Laedpfx Aev A Htkel Noa Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Ledpov A Htdefx Al Nsaa Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit Lsdpfxjv A Hr Tj Al Nsaa - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4500 x 1200 x 1200 mm Weight: 1,500 kg Total power requirement: 8 kW Optimisation Crosscut Saw WS1 - Cutting height Position A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Position B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed: up to 100 cycles/min - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3,600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right: 2,000 mm with double marking station - Outfeed table left: 1,000 mm - Extraction connection diameter: 200 mm Ledpfx Aevz Hz Ejl Neaa - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7'' colour touch screen for easy operation + fixed-length crosscut mode + sequential crosscut mode (10 different dimensions can be saved) + crosscutting of marked chalk lines + fixed-length and marked chalk line crosscutting - CE conformity - Dimensions: L=4500, W=1200, H=1200 mm - Weight: 1,500 kg