Optimizacija prečne rezalne linije

Salvador SuperCut 500 Fast

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 10.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3284, Standardna različica RUF Lignum R2 z izstopnimi kanali, el. motor 22 kW, velikost briket 150x60 mm, zmogljivost do 500 kg/h Pedpfx Anoyyl Srsdjgn

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm Pgedpfx Aowvqkljndsn • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 Pgedjv Nhx Uspfx Anden CE certificate

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, 1 overhauled Paul flitch separator, 2-lamella design, right: fixed lamella, left: movable lamella (for a left-hand machine) total length: 5.50 m total width: 850 mm roller pitch: 500 mm roller width: 790 mm for max. wood length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings. Pgedpfxotx A Sxs Anden Movable lamella mounted on 4 ball-bearing-supported guides, easy to move, with new roller chain and 11 new return pulleys. Robust sheet metal lining between all rollers. As new condition.

Stanje: novo, Leto izdelave: 2026, 10T Ramp, Usable Internal Width 1.7 m – TM-GROUP, the Best Choice on the Market ✅ Specification: - Manufacturer: TM-GROUP - Maximum Load Capacity: 10 tons - Internal Width of Ramp: 1700 mm - Reinforced side railings on both sides - Ramp rollers for easy repositioning - Central handle for positioning with a forklift - Adjustable incline angle and flap height - Reinforced ramp supports on both sides - Moving parts equipped with grease nipples - Ramp additionally equipped with a winch - ELECTRIC as well as manual ramp height adjustment ✅ Drive-on Grating: Grating with anti-slip grooves. Secure and stable surface. Both forklifts and pedestrians benefit from excellent traction and stability. Competitors typically offer ramps made from sheet metal with mesh overlays. Our product uses grooved grating – a much more durable solution that ensures debris under the wheels does not remain on the ramp and the forklift does not slip. ✅ Forklift Mount – dual-sided installation: Practical and quick mounting for forklifts allows transport of the ramp in any direction. The specially developed handle also enables precise maneuvering in confined spaces. ✅ Chain for Securing to Truck, Railcar, or Fixed Warehouse Ramp: A heavy-duty steel chain provides added safety and prevents the ramp from slipping during loading and unloading. ✅ Sturdy Side Railings: Safety railings that can be removed and replaced with a frame/roof (roof optional). ✅ Electric Height Adjustment: Smooth electro-hydraulic drive with a high-quality pump. Requires only 230V – can be connected to any standard socket. ✅ Dual-Sided Hand Pump: Hydraulic pump for height adjustment when no power supply is available – lifting function on both sides. Ideal solution for use in any conditions. ⭐️ Available Versions: ⭐️ Ramp widths: 1700 mm, 2000 mm, and 2500 mm – Standard, Premium, and Premium Plus Mobile ramps with load capacities of 10, 15, 20, and 25 tons Grating thicknesses: 3 – 5 cm Pjdpfx Aswa Nr Njndegn Colors: Red, Blue, Black, and Green (special colors upon request) Mobile ramp with tarpaulin As a manufacturer, we offer custom-made solutions according to individual requirements – in various sizes, load capacities, and variants. Need a tailor-made solution you can’t find anywhere else? Contact our specialist! Keywords: Loading ramp, unloading ramp, drive-on ramp, mobile ramp, loading station, transfer ramp, mobile loading ramp, mobile drive-on ramp.

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) Psdpshuthyefx Andsgn maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives immediately ready for operation

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 926 h, skupna višina: 1.800 mm, skupna dolžina: 11.250 mm, skupna širina: 900 mm, Barva: Siva Teža: 1.500 kg Cena: Na zahtevo - Leto izdelave: 2012 - Dokumentacija na voljo: Ne Pjdjyna Ezjpfx Andjgn - CE označba prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 546324 - Delovne ure: 926 - Glavna moč motorja [kW]: 7,5 - Največja dolžina žaginega lista [mm]: 7.209 - Največja širina žaginega lista [mm]: 300 - Največji premer žaginega lista [mm]: 500 - Premer žaginega lista na osi [mm]: 85 - Dolžina podajalne mize [mm]: 7.850 - Dolžina izhodne mize [mm]: 2.400 - Opcije: Avtomatski podajalni sistem - Napetost [V]: 400 - Poraba toka [A]: 22 - Varovalka [A]: 25 - Moč [kW]: 11,0 - Transportne mere: 11.250 mm x 900 mm x 1.800 mm (d x š x v) - Transportna teža [kg]: 1.500 kg Finančne informacije DDV: Navedena cena je brez DDV DDV / obdavčenje na razliko: DDV je odbiten za podjetja Dostava in odkup sta vedno možna za vse iz industrijskega področja Yorick Diebels

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Pedpefxpbmefx Andegn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Naprodaj: tračna žaga Wood-Mizer WB2000 (letnik 2020) Naprodaj je Wood-Mizer WB2000 iz leta 2020, vendar je bila v uporabi šele od leta 2021. Stroj je bil redno vzdrževan, malo uporabljen in je v zelo dobrem tehničnem stanju. Tehnični podatki: zmogljiv elektromotor 30 kW premer hloda do cca 1 m širina reza do približno 90 cm nosilnost okoli 6 ton primerna za 90–100 mm široke tračne žage Oprema (vključeno): celotni nakladalni/vhodni transporter izhodna miza z razdeljevanjem materiala v tri smeri (levo / desno / naravnost) sistemska kamera za nadzor reza PRO upravljalna plošča z zaslonom na dotik dodatno vgrajena hitra vpenjalna enota Pgedpfx Aoyha Ipsndon Stroj si je mogoče ogledati in preizkusiti na lokaciji, vse deluje brezhibno.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, ser. št. 2603-624, letnik 1981 z pohodno zvočno zaščitno kabino KASCHWIG – SKORAJ NOVA iz leta 2017 • Kratka dovajalna miza s težkim 6-valjnim podajalnikom 1. Vreteno spodaj 11,0 kW 2. Vreteno desno 11,0 kW 3. Vreteno levo 11,0 kW 4. Vreteno zgoraj 15,0 kW 5. Vreteno spodaj 11,0 kW 6. Vreteno spodaj 11,0 kW • Hidravlični podajalnik 6-60 m/min. • Podajalni motor 22,0 kW • 4 x pogonski mizni valji • Premer vretena 50 mm • Avtomatsko mazanje mize • Vreteno 1 + 4 + 5 + 6 z nasprotnim ležajem • Vreteno 1 + 4 z direktnim ravnalom • Podajalni valji 170 mm • 4 kosi hidro skobeljnih glav 150 mm • 6 kosov hidro skobeljnih glav 250 mm Pgedpfxotkt Tps Anden • Odsesovalni nastavek nad strojem