Okuma Multus B 400 nakup rabljenega (231)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 560 mm, pomik osi Y: 460 mm, pomik po osi Z: 450 mm, skupna višina: 2.650 mm, skupna širina: 1.800 mm, skupna masa: 5.000 kg, največja hitrost vretena: 7.000 obr/min, moč vretenovega motorja: 11.000 W, teža orodja: 8.000 g, število osi: 3, This 3s Okuma MX-45VAE vertical machining center was manufactured in 1999. It features a traverse range of 560 mm on the X-axis, 460 mm on the Y-axis, and 450 mm on the Z-axis, offering versatile machining capabilities. With a tool magazine capacity of 20 tools and a maximum tool weight of 8 kg, it is well equipped for various applications. Take advantage of this opportunity and purchase this Okuma MX-45VAE vertical machining center. Contact us for further details. • Spindle nose to table surface: 160-610 mm (6.30-24.02 in) • Table: • Working surface: 460 × 760 mm (18.11 × 29.92 in) [optional: 460 × 1000 mm (18.11 × 39.37 in)] • Height of table surface from floor: 750 mm (29.53 in) Itjdoyk Eyvjpfx Adkod • Load capacity: 3430 N (770 lbf) [optional: 4900 N (1100 lbf)] • Spindle: • Number of speeds: stepless • Taper: 7/24, NT40 • Front bearing diameter: 70 mm (2.76 in) • Feed rates: • Rapid traverse (X/Y): 36 m/min (1417 ipm) • Rapid traverse (Z): 30 m/min (1181 ipm) • Cutting feed (X/Y/Z): 10 m/min (394 ipm) • ATC (Automatic Tool Changer): • Tool shank: MAS BT40 • Pull stud: MAS 2 • Magazine capacity: 20 tools [optional: 32 or 48 tools] • Max. tool diameter with adjacent tools: 90 mm (3.54 in) • Max. tool diameter without adjacent tools: 125 mm (4.92 in) • Max. tool length: 250 mm (9.84 in) • Tool selection: Random memory • Motors: • Main spindle drive: • 7.7/5.5 kW (10.27/7.5 hp), 30 min/continuous operation, for 50-1100 rpm • 11/7.5 kW (15/10 hp), 10 min/continuous operation, for 1101-7000 rpm • Feed motors: X/Y: 3.0 kW; Z: 4.0 kW Dimensions Machine depth: 2380 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 900 mm, pomik po osi Z: 1.000 mm, skupna višina: 3.280 mm, obremenitev mize: 1.200 kg, skupna masa: 24.000 kg, največja hitrost vretena: 12.000 obr/min, število osi: 4, This 4-axis Okuma MA 600H II was manufactured in 2019. It features a 630 × 630 mm table capable of supporting loads up to 1,200 kg, and a high-speed spindle reaching up to 12,000 rpm. The machine is equipped with rapid traverse speeds of 60 m/min and a large tool magazine with 171 positions. If you are looking for a high-quality milling machine, you should consider the Okuma MA 600H II that we offer for sale. Please contact us for more information. Itodpfx Adsx D Rtmsksd • Table/Palette • Usable table surface: 630 × 630 mm • Maximum rotational dimensions: Ø1,000 × 1,000 mm • Standard indexing: 0.001° • Table indexing time (90°-180°): 2.0-3.0 sec • Pallet change time: 7 sec • Axis travels / Linear working area • Spindle center to table surface: 50-950 mm • Spindle nose to pallet center: 70-1,070 mm • Cutting feed rate: 60,000 mm/min • Positioning accuracy X/Y/Z: ±0.004 mm (STD JIS) • Repeatability X/Y/Z: mm (STD JIS) • Spindle • Front bearing diameter: Ø60 mm • Coolant through spindle (CTS): Yes • Pneumatic supply: 4-6 bar • Spindle cooling: Yes • Turning function: Yes • Tool magazine • Fixed position tool management: Yes • Tool change time (tool-to-tool): 1.9 seconds • Tool change time (chip-to-chip): 4.4 sec • Footprint (2-pallet version): 3.38 × 6.11 m • Installed power: 50 kVA Additional equipment • Chip conveyor: Mayfran Consep 2000 • Table edge presetting • Preparation for Renishaw probe (probe mounting prepared)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 1.790 h, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 11.500 W, število osi: 2, This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22 kW spindles, a BMT55 turret with 32 stations, and an OSP-P300LA control system equipped with OSP and ECO Suites. The machine includes a Samsys short bar loader, a high-pressure pump, and a tank. This lathe offers 4-axis machining capabilities, with a Y-axis on the upper turret, and is fitted with a 15" color LCD TFT multitouch display. If you are looking for a high-quality lathe, consider the Okuma LT2000-2T1MY we have for sale. Please contact us for further information. Additional Equipment • 22 kW Okuma main spindle and sub-spindle • 70 mm maximum bar capacity for main spindle and Samsys bar loader • 2 turrets, each with 16 stations, BMT55, driven tools • Proven, extremely robust and stable OSP300 • 80 bar Okuma high-pressure package (factory-fitted in Japan with reinforced seals), on both turrets. Ideal, for example, for deep-hole drilling in stainless steel, titanium, Inconel. • In excellent condition, very good geometry. Okuma serviced, geometry report provided upon sale. • Automation: Samsys short bar loader • Additional features: High-pressure pump and tank, high-pressure seal kit, workpiece removal arm, tool height correction in Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable area pressure, and Hi-Cut Pro for driven tools • Two BMT55 turrets, each with 16 stations Isdpeyh Ntlsfx Adkstd Advantages of the Machine Technical Advantages • Features: Reduction of machine downtime, harmonic speed oscillation, automatic speed synchronization, and remote diagnostics during warranty period • Machine hours: 2,268 • Z-taper: 140 mm • Front bearing diameter: 100 mm • Torque: 183 Nm • Y-axis: Y-axis on upper turret with travel range of +50/-45 = 95 mm • Helical interpolation: available with x/y/z linear axes, including eccentric milling with x/y/c-axes • Tool monitoring system • Tool offsets: 96 tool offsets per turret Additional Information • Spindle orientation: Electronic spindle alignment +/- 0.1 • Memory: 2 GB part program storage with a maximum program length of 2 MB • Data management: MacMan machine management with integrated production data acquisition • Control: CNC twin-spindle turning center with control system featuring OSP Suite with numerous apps and ECO Suite energy-saving functions • Display: 15" color LCD TFT with 3D color graphics and multitouch panel/screen • Operating system: Second Windows operating system for operation and data communication • Controller connections: 2 USB 2.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, število osi: 2, Cette Okuma LVT 300 a été fabriquée en 2005. Elle se distingue par une conception robuste et précise, et a été récemment modernisée, notamment avec un nouveau vérin de serrage SMW et un nouveau mandrin SMW en 2020, ainsi qu'un axe Z entièrement révisé avec de nouvelles guidages et une nouvelle broche. Parmi les autres caractéristiques figurent un convoyeur EWAB pour une logistique automatisée des pièces et de nombreux porte-outils. Profitez de cette occasion pour acquérir ce tour vertical Okuma LVT 300. Contactez-nous pour plus d'informations. • 2020 : Vérin de serrage SMW remplacé • 2020 : Mandrin SMW remplacé • Axe Z entièrement révisé : nouveaux guidages, nouvelle broche • Construction Okuma robuste et précise Équipement supplémentaire • Convoyeur EWAB pour la logistique automatisée des pièces • Convoyeur à copeaux Mayfran d'origine (remplacé en 2022) Itedpfxeynbdrj Adkod • De nombreuses mâchoires incluses • Fourni avec de nombreux porte-outils

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 270 mm, pomik osi Y: 120 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.330 mm, skupna masa: 10.000 kg, največja dolžina izdelka: 3.530 mm, število osi: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021 and features a maximum turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds of up to 5,000 rpm and is equipped with a motorized 12-position turret. The machine is ideal for complex turning operations, offering rapid traverse rates and a large center distance of 1,200 mm. Take the opportunity to purchase this Okuma LT 300 MY horizontal lathe. Contact us for further information. • Distance between centers: 1,200 mm • Maximum turning diameter: 350 mm • Swing over guards: 550 mm • Spindle / Sub-spindle: ASA 8 • Bar capacity: 65 mm • Tailstock/sub-spindle stroke (W-axis): 940 mm Isdpfx Adsx Imrieketd • X-axis travel: 270 / 230 mm • Y-axis travel: ±60 mm • Z-axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Rapid traverse Y-axis: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret indexing time: 0.25 s • Driven tool speed/power: 100–4,500 rpm, 7.0 / 3.3 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 1.450 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 600 mm, obremenitev mize: 600 kg, največja hitrost vretena: 8.000 obr/min, moč vretenovega motorja: 15.000 W, število osi: 5, Tato 5osá Okuma MU 6300 V L 5 AXIS byla vyrobena v roce 2016. Disponuje velkorysým pojezdem osy X 1 450 mm a pojezdem osy Y 1 050 mm, což nabízí velký pracovní prostor pro různé obráběcí úlohy. S maximálním průměrem obrobku 830 mm a kapacitou zásobníku nástrojů 64 pozic byste měli zvážit koupi tohoto vertikálního obráběcího centra Okuma MU 6300 V L. Pro více informací nás kontaktujte. • Otáčení osy A: +90° / -120° • Rychlost otáčení osy C: 800 ot./min • Vzdálenost stůl–čelo vřetena: 160–760 mm • Rychloposuv (všechny osy): 50 m/min • Průměr stolu osy C: 630 mm • Maximální rozměr obrobku (D × V): 830 × 550 mm • Zásobník nástrojů: 64 pozic (rozšiřitelný na 166) Itsdsyia Tlopfx Adkod Technické specifikace Upínací kužel HSK 63

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, CNC stružno-rezkalni center Okuma LT 2000 EX -MY 2ST Krmilnik: OSP-P300L Ijdpfx Adsyvfhdskotd Leto izdelave: 2013 Premer struženja nad ležiščem: 400 mm Razdalja med konicama: 960 mm Premer struženja: 210 mm Hitrost vrtenja: 50 – 6.000 obr/min Protivreteno hitrost vrtenja: 50 – 6.000 obr/min Pomiki: W-os: 730 mm X-os: 205 mm C-os: 360 stopinj (0,001) 2 kosa revolverskih glav s po 16 mesti (vsa mesta gnana) Oprema: - Transporter ostružkov - Filter s papirnatim trakom z visokotlačno črpalko - 2x 3-čeljustna glava Kitagawa - OGL-portalski nakladalec z nosilnostjo ca. 5 kg - Skladiščni magazin 20 mest - Touchsetter - Meritvena sonda Renishaw - Odsesovalna naprava - Razna dodatna oprema

Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stružnica z nagnjeno posteljo Okuma. Premer vpenjalne glave: 200 mm, premer obhoda: 400 mm, premer struženja: 300 mm, dolžina struženja: 470 mm, število orodnih mest: 8. Dimenzije stroja X/Y/Z: cca 4000 mm/2150 mm/2150 mm, teža: cca 5500 kg, krmiljenje: OSP 3000 L. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Itsdpjyttwzsfx Adkjd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC stružnica Okuma Genos L3000 e MYW Krmilnik: OSP-P300LA-e Leto izdelave: 2021 Maks. premer obdelave: 390 mm Premer nad prečnim suportom: 260 mm Maks. dolžina struženja: 500 mm Pomiki: X-os: 235 mm Z-os: 450 mm Itodeyt E A Nepfx Adksd Y-os: ±50 mm C-os: 360° / 0,001° Revolver: 12 mest – vsi pogonski Število obratov: 38 - 3.800 obr/min Vpenjanje orodja: VDI 40 Dodatna oprema/izbira: - transporter ostružkov - touch setter - one Touch IGF - zbiralnik delov - ojačan hladilni sistem 8 bar - odsesavanje

Stanje: dober (rabljeno), Leto izdelave: 2005, The machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock and spindle nose: 2,505 mm Y-axis: 250 mm Main spindle speed up to 3,500 rpm Spindle power: 30 kW Lower turret with 12 stations Milling spindle, infinitely variable B-axis Magazine with 80 positions HSK 100 tool holder Three-jaw chuck, diameter 315 mm In 2023, the cable drag chain of the W-axis including all hoses was replaced. In October 2024, the linear guides of X/Y/Z axes were replaced. Work carried out by Okuma: - Machine cleaned - Sheet metal and covers removed - 8th axis removed - Gantry dismantled and lifted out of the machine, ATC dismantled and lifted out - All linear guides dismantled - Bearing surfaces of the ZA axis cleaned - New linear guide ZA (including shoes) fitted and tightened to specified torque - New ball screw ZA (including bearing) installed - Base plate of the gantry installed and tightened to specified torque at the shoes, lubrication lines connected - ATC including attachments installed and connected - New linear guides YA and XA installed and tightened to specified torques; new ball screw YA (including bearing) installed - Gantry inserted and lubrication lines connected; base plate XA mounted and aligned - 8th axis mounted and aligned - H1 turret mounted Iedpeyt Nvtofx Adketd o Mount drive motor for the 8th axis o Assemble 8th axis and new H1, set geometry o Functional test for 8th axis and H1 o Run-in program for B axis approx. 12h, then drain old oil from 8th axis o Run-in program for H1 and defect report for OEG o Mount left door and adjust various sheet metal parts o Install chuck o Adjust zero points o Check tool change

Stanje: dober (rabljeno), Leto izdelave: 2004, CNC stružno-rezkalni center z 9 CNC osmi, Okuma Mac Turn 350 W, letnik 2004, OSP-E 100L, 80 Ww fac, vpenjalni sistem HSK 63, brezstopenjska B os kot rezkalno vreteno, spodnji revolver 12-pozicijski z gnanimi orodji, Kompaktna filtrirna naprava Interlite 900 l, odsesavanje, čas delovanja vretena približno 18300 h, transporter za odrezke, popolnoma obnovljena roka orodnega menjalca, visokotlačno hlajenje, merilna roka za orodja, servisiran menjalnik orodij, glavna vretena Kitagawa B - 210, proti-vreteno Kitagawa B - 208. Itodjyt H U Tjpfx Adked

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, OKUMA LCC15, OSP 700L, napenjalna glava za vpenjalne tule, transporter za ostružke, črpalka za hladilno tekočino, touch setter, transporter za ostružke, pobiralnik delov, V12 revolver z direktnim vpenjanjem, Zelo kompakten in dober stroj za obdelavo palic. *Podajalnik palic LNS je priložen brezplačno ob stroju, ni del prodaje in ga mora elektronsko obnoviti tehnik LNS. Itsdpfxjyq S E So Adksd

Stanje: dober (rabljeno), Leto izdelave: 2002, Ref. št.: 10434 Proizvajalec: OKUMA Tip: LC 40 Leto izdelave: 2002 Vrsta krmiljenja: CNC Krmiljenje: FANUC 18-i TB Lokacija skladišča: Halberstadt Država izvora: Nemčija Število vrtljajev: 10 - 2.800 vrt/min Prehod palice: 91 mm Premer vpenjalne glave: 450 mm Premer konjička: 120 mm Itsdeym Na Espfx Adkod Premer struženja: 550 mm Dolžina struženja: 800 mm Obodni premer: 800 mm Prehod vretena: 90 mm Vpenjalna glava vretena: A2-8 Pomik pinole konjička: 150 mm Skupna potrebna moč: 44 kW Približna teža stroja: 8 t Število orodnih postaj: 12 kos.

Stanje: rabljeno, Deli so bili odstranjeni iz proizvodnih naprav, ki so delovale do ustavitve. Itodpfxoyn R S Eo Adked Stanje: rabljeno (delujoče)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Okuma GENOS L2000-e Leto: 2018 Največji premer struženja (mm): Ø200 Največja delovna dolžina (mm): 380 Pomiki X osi (mm): 165 Pomiki Z osi (mm): 400 C-os: 360° (koraki 0,001°) Hitrost vretena (min⁻¹): 5.000 Priključek vretena: JIS A2-6 Tip revolverske glave: V12 VDI (aksialna) Število orodij: 12 (L/M) Zunanje držalo orodja (mm): 20×20 Notranje držalo orodja (premer mm): Ø32 Hitrost vretena za rezkalno orodje (rpm): 6.000 Hitri pomik (X, Z) (m/min): X:25, Z:30 Hitri pomik (C) (rpm): C:200 Premer konjičeve puše (mm): Ø90 Stožčasta odprtina: MT.5 (vrteče središče) Pomik puše konjiča (mm): 100 Motorji, glavno vreteno (20min/kont.) (kW): VAC15/11 Rezkalno vreteno – moč (kW): PREX 4.0/1.8 (25min/neprekinjeno) Motor hladilne črpalke (kW): 0,8 Dimenzije stroja Višina (mm): 1.620 Tloris (mm): 2.100 × 1.850 Teža (kg): 3.700 Dodatna oprema/možnosti: - C-os - Statična orodna držala - Konjič Itjdpfoyk Hwiox Adksd - Nožni pedal za vpenjalo in konjič - Sredinska puša za konjič - Transporter za odrezke - Rezervoar za hladilno tekočino - LNS dovajalnik - Dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 1992, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 560 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: Okuma OSP5020M, skupna višina: 2.700 mm, skupna dolžina: 2.500 mm, skupna širina: 2.500 mm, največja hitrost vrtenja: 8.000 obr/min, skupna masa: 4.000 kg, največja hitrost vretena: 8.000 obr/min, delovne ure vretena: 10.000 h, dovod hladilne tekočine: 5 letvica, število mest v zalogovniku orodij: 18, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, CNC Milling Machine Okuma VR40 Year of manufacture: approx. 1992 3 axes, X=560mm, Y=450mm, Z=450mm travels. Spindle speed: 8,000 rpm, SK40 taper Spindle hours: approx. 10,000h Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Tool magazine with 18 stations Various tool holders with assorted tools The machine was originally used in a sheltered workshop and has also only been used occasionally in our facility. It is in very good condition; both the axes and the spindle run smoothly and quietly. Machine accuracy is very high. The machine can be powered up and inspected on our premises. The machine is sold with three vises and the accessories shown in the photos. Complete documentation is available. Two tool stations are defective because the plastic grippers are broken. They can be replaced with new grippers. Itodpfjyha R Rox Adked Normally, the machine has 20 tool stations. This has never been an issue for us over the years.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, hitrost vretena (min.): 3.200 obr/min, skupna višina: 1.700 mm, skupna dolžina: 2.700 mm, skupna širina: 1.900 mm, skupna masa: 6.500 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, OKUMA ES L II-M Letnik 2002 Itedpfoyna Uiex Adkjd Majhen, zelo kompakten stružni stroj z veliko zmogljivostmi. Krmiljenje U-10L, izmetovalec kosov, touchsetter, V12 revolverska glava VDI 30 - vse pogonske, ročni konjiček, transporter za ostružke, črpalka za hladilno tekočino, podajalnik palic Samsys MUS-3000 letnik 2007, vključuje opremo, vpenjalna glava SMW KNCS-N210-52, paket s čeljustmi in 24 orodji opcijsko na voljo.

Stanje: dober (rabljeno), Leto izdelave: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (Year 2015) Description: High-performance OKUMA CNC vertical machining center, model MILLAC 852VII, for sale. Japanese-designed machine renowned for its exceptional rigidity and surgical precision. Particularly suited for machining complex and heavy prismatic workpieces. Technical Specifications (Manufacturer's Data Plate): Manufacturer: OKUMA Corporation (Made in Japan) Model: MILLAC 852VII Year of manufacture: March 2015 (2015.03) Power supply: 380 V / 3-Phase / 50 Hz Rated Power: 44.3 kVA (High-power spindle motor) Compliance: CE marking (Certified for the European market) Work Capacities (Standard for model 852VII): Itjdpfx Ajyr Id Hjdkod Travel (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Large capacity) Table dimensions: 2,200 mm x 850 mm Maximum table load: 3,000 kg Spindle speed: Up to 6,000 or 10,000 rpm (depending on option) Spindle taper: BT 50 (High rigidity) Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) Machine weight: approx. 17,500 kg (Extra-heavy-duty frame) Key Features: Recent machine (2015), still meets current technology standards. Heavy-duty box guideways ensure outstanding surface finish quality.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Spindle power: 22kW Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Tool changer: 16 positions Driven tool speed: 6000 RPM Lower turret positions: 16 Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Itjdpfxsyn Em Ro Adked Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff – The Okuma Specialist and NeffBuy Additionally, we are happy to offer you an all-inclusive package: inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, installation and commissioning of the machine, as well as operator training and subsequent service. Itjdpfxjvta Rko Adkod We provide Okuma CNC service throughout Europe, both electronically and mechanically. On top of that, we have a 1,200 m² stock of all Okuma spare parts. Please feel free to visit our website for more information.

Stanje: rabljeno, Leto izdelave: 1995, Premer struženja 150 mm Dolžina struženja 1250 mm Krmiljenje OSP 7000 L Skupna potrebna moč 37 kW Teža stroja ca. 8.500 kg CNC stružnica OKUMA LU 25 Leto izdelave 1995 Krmiljenje OSP 7000 L Pomiki osi Tehnični podatki glej slike Ijdpfx Adoyi Hwtokotd

Stanje: rabljeno, Leto izdelave: 2001, X-premik 560 mm Y-premik 460 mm Z-premik 450 mm Krmilnik OSP U10 M Skupna priključna moč 7,5 kW Teža stroja pribl. 5 t CNC rezkalni stroj OKUMA MX 45 VAE Leto izdelave 2001 Krmilnik OSP U10 M Premiki osi X 560 mm Y 460 mm Z 450 mm Itodpfeyi Hv Nex Adked Tehnični podatki glej slike

Stanje: rabljeno, Leto izdelave: 2001, Premer struženja 200 mm Dolžina struženja 130 mm Krmiljenje OSP 100 L Skupna potreba po moči 15 / 22 kW Teža stroja cca. 5,5 t CNC stružnica Itjdpfxsyi Hv Ao Adkod OKUMA LVT 300 Leto izdelave 2001 Krmiljenje OSP 100 L Za tehnične podatke glejte slike.

Stanje: rabljeno, Leto izdelave: 2019, OKUMA MA600HII 2019, 4-osni rezkalni stroj z upravljanjem OSP P300M, miza 630 x 630 mm, največja obremenitev do 1.200 kg, visoko-hitrostno vreteno 12.000 obr/min, hitrost pomika 60 m/min, polna orodjarna s 171 postajami, pomik osi X 1000 mm, osi Z 1000 mm, osi Y 900 mm. Serijska številka: 224574 (2019) Strošek priprave in natovarjanja na ustrezen transport v višini 4.500 € bo samodejno dodan k računu ob uspešnem nakupu tega artikla. Itsdpfoyplrpsx Adksd Lokacija: Ti loti se nahajajo v Mielecu, Poljska. Za več podatkov obiščite našo spletno stran. Dražba 3459

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 11.287 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 370 mm, stružna dolžina: 1.000 mm, premer struženja: 350 mm, izvrtina vretena: 62 mm, največja hitrost vretena: 5.200 obr/min, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Revolver A VDI40, 12 postaj, vse gnane (M-orodja), revolver B VDI40, 8 postaj, touch setter za revolverja A in B, ročni konjiček, transporter odrezkov, hladilna črpalka 8 barov, odsesavanje, podajalnik palic Samsys Multi-3000, čeljusti in orodja opcijsko na voljo. Ijdpoylpzasfx Adkjtd