Okuma Lb 9 nakup rabljenega (232)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: OKUMA, največja hitrost vretena: 8.000 obr/min, število osi: 4, This 4-axis Okuma MA-400HA horizontal machining centre was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking for high-quality milling capabilities, you should consider the Okuma MA-400HA machine we have for sale. Contact us for further information. Additional equipment • Tool changer gearbox is defective Kledpsx U Trvsfx Adkop Machine advantages Technical advantages of the machine: • Pallet size: 400x400 mm / 2 pallets • B-axis rotary table (reversible) The following repairs have been carried out: 12/2022 – Replacement of the control unit (U2319), replacement of the ATC gearbox, replacement of the X-axis telescopic cover (H1090-0025-98-2). Small parts have been replaced regularly (hoses, sensors, bulbs, etc.). The spindle is in good condition with no major damage. The machine produced accurately and within tolerance up to its last use. Regarding the non-functioning tool changer gearbox – there is increased backlash in the gearbox, so during tool change the tool does not remain perfectly aligned with the spindle axis upon entry. The bearing/cams in the gearbox are probably damaged. Service and maintenance have been carried out by an authorised OKUMA service provider.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 900 mm, pomik po osi Z: 1.000 mm, skupna višina: 3.280 mm, obremenitev mize: 1.200 kg, skupna masa: 24.000 kg, največja hitrost vretena: 12.000 obr/min, število osi: 4, This 4-axis Okuma MA 600H II was manufactured in 2019. It features a 630 × 630 mm table capable of supporting loads up to 1,200 kg, and a high-speed spindle reaching up to 12,000 rpm. The machine is equipped with rapid traverse speeds of 60 m/min and a large tool magazine with 171 positions. If you are looking for a high-quality milling machine, you should consider the Okuma MA 600H II that we offer for sale. Please contact us for more information. • Table/Palette • Usable table surface: 630 × 630 mm • Maximum rotational dimensions: Ø1,000 × 1,000 mm • Standard indexing: 0.001° • Table indexing time (90°-180°): 2.0-3.0 sec • Pallet change time: 7 sec • Axis travels / Linear working area • Spindle center to table surface: 50-950 mm • Spindle nose to pallet center: 70-1,070 mm • Cutting feed rate: 60,000 mm/min • Positioning accuracy X/Y/Z: ±0.004 mm (STD JIS) • Repeatability X/Y/Z: mm (STD JIS) • Spindle • Front bearing diameter: Ø60 mm • Coolant through spindle (CTS): Yes • Pneumatic supply: 4-6 bar • Spindle cooling: Yes • Turning function: Yes • Tool magazine • Fixed position tool management: Yes • Tool change time (tool-to-tool): 1.9 seconds • Tool change time (chip-to-chip): 4.4 sec • Footprint (2-pallet version): 3.38 × 6.11 m • Installed power: 50 kVA Additional equipment • Chip conveyor: Mayfran Consep 2000 • Table edge presetting • Preparation for Renishaw probe (probe mounting prepared) Klsdjx D Rtmopfx Adkjp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 1.790 h, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 11.500 W, število osi: 2, This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22 kW spindles, a BMT55 turret with 32 stations, and an OSP-P300LA control system equipped with OSP and ECO Suites. The machine includes a Samsys short bar loader, a high-pressure pump, and a tank. This lathe offers 4-axis machining capabilities, with a Y-axis on the upper turret, and is fitted with a 15" color LCD TFT multitouch display. If you are looking for a high-quality lathe, consider the Okuma LT2000-2T1MY we have for sale. Please contact us for further information. Additional Equipment • 22 kW Okuma main spindle and sub-spindle • 70 mm maximum bar capacity for main spindle and Samsys bar loader • 2 turrets, each with 16 stations, BMT55, driven tools • Proven, extremely robust and stable OSP300 • 80 bar Okuma high-pressure package (factory-fitted in Japan with reinforced seals), on both turrets. Ideal, for example, for deep-hole drilling in stainless steel, titanium, Inconel. • In excellent condition, very good geometry. Okuma serviced, geometry report provided upon sale. • Automation: Samsys short bar loader • Additional features: High-pressure pump and tank, high-pressure seal kit, workpiece removal arm, tool height correction in Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable area pressure, and Hi-Cut Pro for driven tools • Two BMT55 turrets, each with 16 stations Advantages of the Machine Technical Advantages • Features: Reduction of machine downtime, harmonic speed oscillation, automatic speed synchronization, and remote diagnostics during warranty period • Machine hours: 2,268 Kedpfsyh Ntlsx Adkjlp • Z-taper: 140 mm • Front bearing diameter: 100 mm • Torque: 183 Nm • Y-axis: Y-axis on upper turret with travel range of +50/-45 = 95 mm • Helical interpolation: available with x/y/z linear axes, including eccentric milling with x/y/c-axes • Tool monitoring system • Tool offsets: 96 tool offsets per turret Additional Information • Spindle orientation: Electronic spindle alignment +/- 0.1 • Memory: 2 GB part program storage with a maximum program length of 2 MB • Data management: MacMan machine management with integrated production data acquisition • Control: CNC twin-spindle turning center with control system featuring OSP Suite with numerous apps and ECO Suite energy-saving functions • Display: 15" color LCD TFT with 3D color graphics and multitouch panel/screen • Operating system: Second Windows operating system for operation and data communication • Controller connections: 2 USB 2.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 900 mm, pomik po osi Z: 1.000 mm, skupna višina: 3.280 mm, skupna masa: 24.000 kg, največja hitrost vretena: 12.000 obr/min, teža orodja: 25.000 g, število osi: 4, This 4-axis Okuma MA 600 HB was manufactured in 2011 and is characterized by being a robust horizontal machining center. It features X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a high-capacity chain-type magazine holding 150 tools and provides fast tool change times. Take advantage of this opportunity to purchase the Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. • Spindle center to table surface: 50 to 950 mm • Spindle nose to pallet center: 70 to 1,070 mm • Table/Palette • Maximum rotary dimensions: 1,000 × 1,000 mm • Continuous table positions: 360,000 • Pallet change time: 7 seconds • Pallet type: MAS drilled • Through-spindle cooling: 20 bar Ksdpfsx D Hzyox Adkjlp • Compressed air pressure: 46 bar • Feed: • Cutting feed rate: 60,000 mm/min • Positioning accuracy X-Y-Z: 0.004 mm • Repeatability X-Y-Z: mm (not specified) • Tool/Magazine • Tool change time (tool-to-tool): 1.9 sec • Tool change time (chip-to-chip): 4.4 sec • Tool selection: random • Max. tool diameter (adjacent slots empty): 240 mm • Footprint: 3.38 × 6.11 m • Installed power: 50 kVA • Machine features • Work area shower washing system: Yes • Presetter at table edge: Yes • Probe/zero point displacement device: Yes Additional Equipment • Chip conveyor: Mayfran Dimensions Machine depth: 3380 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 760 mm, pomik osi Y: 760 mm, pomik po osi Z: 760 mm, skupna višina: 2.864 mm, skupna masa: 11.500 kg, največja hitrost vretena: 15.000 obr/min, teža orodja: 10.000 g, število osi: 4, This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet that can accommodate a maximum load of 500 kg and offers a comprehensive travel range with 760 mm stroke in the X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 rpm and a 64-position tool magazine, this horizontal machining center is ideal for complex machining tasks. Contact us for further information about this machine. • Spindle center to pallet top: 50-810 mm Kjdpsx D Rrcofx Adkolp • Spindle nose to pallet center: 135-895 mm • Table/pallet: 500 × 500 mm; load capacity 500 kg; 1° indexing • Workpiece capacity: max. Ø800 × 1,000 mm • Cutting feed: 1-60,000 mm/min; rotary table drive motor 3.0 kW • Tooling: tool taper MAS403/BT40; pull stud MAS 2; magazine for 64 tools; random selection • Floor space: 2,700 × 4,710 mm Additional equipment • Chip conveyor • Through-spindle coolant (CTS) • Tool presetting at table edge • Interface for Renishaw probe • Shower/washdown system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, število osi: 2, Cette Okuma LVT 300 a été fabriquée en 2005. Elle se distingue par une conception robuste et précise, et a été récemment modernisée, notamment avec un nouveau vérin de serrage SMW et un nouveau mandrin SMW en 2020, ainsi qu'un axe Z entièrement révisé avec de nouvelles guidages et une nouvelle broche. Parmi les autres caractéristiques figurent un convoyeur EWAB pour une logistique automatisée des pièces et de nombreux porte-outils. Profitez de cette occasion pour acquérir ce tour vertical Okuma LVT 300. Contactez-nous pour plus d'informations. • 2020 : Vérin de serrage SMW remplacé • 2020 : Mandrin SMW remplacé • Axe Z entièrement révisé : nouveaux guidages, nouvelle broche • Construction Okuma robuste et précise Équipement supplémentaire • Convoyeur EWAB pour la logistique automatisée des pièces • Convoyeur à copeaux Mayfran d'origine (remplacé en 2022) • De nombreuses mâchoires incluses • Fourni avec de nombreux porte-outils Kodpfx Adeynbdrjkolp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 80 mm, pomik po osi Z: 935 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P200L, število osi: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and a tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality turning machine, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm Klodjx D Rvhopfx Adkjp • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Bar loader IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 270 mm, pomik osi Y: 120 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.330 mm, skupna masa: 10.000 kg, največja dolžina izdelka: 3.530 mm, število osi: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021 and features a maximum turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds of up to 5,000 rpm and is equipped with a motorized 12-position turret. The machine is ideal for complex turning operations, offering rapid traverse rates and a large center distance of 1,200 mm. Take the opportunity to purchase this Okuma LT 300 MY horizontal lathe. Contact us for further information. • Distance between centers: 1,200 mm • Maximum turning diameter: 350 mm • Swing over guards: 550 mm • Spindle / Sub-spindle: ASA 8 • Bar capacity: 65 mm • Tailstock/sub-spindle stroke (W-axis): 940 mm • X-axis travel: 270 / 230 mm • Y-axis travel: ±60 mm • Z-axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Rapid traverse Y-axis: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret indexing time: 0.25 s • Driven tool speed/power: 100–4,500 rpm, 7.0 / 3.3 kW Kjdpfox Imriox Adkolp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 1.450 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 600 mm, obremenitev mize: 600 kg, največja hitrost vretena: 8.000 obr/min, moč vretenovega motorja: 15.000 W, število osi: 5, Tato 5osá Okuma MU 6300 V L 5 AXIS byla vyrobena v roce 2016. Disponuje velkorysým pojezdem osy X 1 450 mm a pojezdem osy Y 1 050 mm, což nabízí velký pracovní prostor pro různé obráběcí úlohy. S maximálním průměrem obrobku 830 mm a kapacitou zásobníku nástrojů 64 pozic byste měli zvážit koupi tohoto vertikálního obráběcího centra Okuma MU 6300 V L. Pro více informací nás kontaktujte. • Otáčení osy A: +90° / -120° • Rychlost otáčení osy C: 800 ot./min • Vzdálenost stůl–čelo vřetena: 160–760 mm • Rychloposuv (všechny osy): 50 m/min • Průměr stolu osy C: 630 mm • Maximální rozměr obrobku (D × V): 830 × 550 mm Kljdpfx Aoyia Tlsdksp • Zásobník nástrojů: 64 pozic (rozšiřitelný na 166) Technické specifikace Upínací kužel HSK 63

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, CNC stružno-rezkalni center Okuma LT 2000 EX -MY 2ST Krmilnik: OSP-P300L Leto izdelave: 2013 Premer struženja nad ležiščem: 400 mm Razdalja med konicama: 960 mm Premer struženja: 210 mm Hitrost vrtenja: 50 – 6.000 obr/min Protivreteno hitrost vrtenja: 50 – 6.000 obr/min Pomiki: W-os: 730 mm X-os: 205 mm C-os: 360 stopinj (0,001) 2 kosa revolverskih glav s po 16 mesti (vsa mesta gnana) Oprema: - Transporter ostružkov - Filter s papirnatim trakom z visokotlačno črpalko - 2x 3-čeljustna glava Kitagawa - OGL-portalski nakladalec z nosilnostjo ca. 5 kg - Skladiščni magazin 20 mest Kljdpoyvfhdjfx Adksp - Touchsetter - Meritvena sonda Renishaw - Odsesovalna naprava - Razna dodatna oprema

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Control OKUMA OSP P200-M Table size 1000 x 460 mm Table load capacity 700 kg X travel 762 mm Y travel 460 mm Z travel 460 mm Spindle speed 15,000 rpm Spindle taper MAS BT40 Tool magazine 20 stations Kodpfx Adsuu Rwyokjlp Drive power Weight 6,500 kg Dimensions (LxWxH) = 2,750 x 2,160 x 2,715 mm Accessories and Equipment: - Chip conveyor - Coolant system - Spindle chiller - Through-spindle coolant (IKZ) - Manuals Very good condition. The machine is being sold due to the closure of production.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 710 mm, premer struženja: 710 mm, moč vretenovega motorja: 11.000 W, hitrost vretena (min.): 38 obr/min, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 690 mm, pomik osi Y: 115 mm, pomik po osi Z: 1.545 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 26 m/min, hitri pomik na osi Z: 40 m/min, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: trifazni, nos vretena: JIS A2-8, skupna masa: 14.000 kg, dolžina orodja: 300 mm, teža orodja: 10 g, pomik osi W: 1.550 mm, Oprema: dokumentacija / priročnik, Obdelovalni center z vrtalno-rezkalno funkcijo OKUMA Multus B400 TEHNIČNE ZNAČILNOSTI: CNC krmilnik: OSP-P200L Razdalja med konicama: 1500 mm Maks. premer obdelave: 710 mm Višina osi nad suportom: 710 mm Pomik osi X: 690 mm Pomik osi Y: -115 / +115 mm Pomik osi Z: 1545 mm Pomik osi W: 1550 mm Natančnost pozicioniranja osi B: 0,001° Največja hitrost rezkalne glave: 6000 min⁻¹ Največja moč rezkalnega vretena: 11 kW Največji navor rezkalnega vretena: 65,7 Nm Rezkalna glava – vpenjalo: HSK-A63 Kapaciteta orodjarnika: 40 Največja dolžina orodja: 300 mm Največji premer orodja: 130 mm Največja teža enega orodja: 10 kg Hitri pomik na osi X: 4.000 mm/min Hitri pomik na osi Z: 40.000 mm/min Hitri pomik na osi Y: 26.000 mm/min Hitri pomik na osi W: 12.000 mm/min Vreteno – čelna prirobnica: JIS A2-8 Min. hitrost vretena: 38 min⁻¹ Maks. hitrost vretena: 3.800 min⁻¹ Korak osi C: 0,001° Napajalna napetost: 400 V Teža: 14.000 kg PRILOŽENA OPREMA: 1 × programska oprema One-Touch IGF 1 × dvotočkovni lunetni naslon ATLING, tip AX8I-NAOS (Ø85–360 mm) Ksdeyqx Rzepfx Adkelp 1 × triodprti vpenjalni tulec SMW AUTOBLOK, Ø340 mm, KNCS-N-340-117 1 × regulator vpenjalnega tlaka za vpenjalno glavo 1 × izmetalec obdelovancev 1 × NC konjiček 1 × merilna sonda MARPOSS T18 1 × daljinski elektronski ročni volan 40 × vpenjalnih držal za orodje HSK-63 1 × dvobarvna signalna opozorilna luč 1 × transporter za odrezke 1 × rezervoar za hladilno tekočino 1 × transformator 1 × komplet navodil + OKUMA CD Stroj je možno videti v delovanju v našem obratu po predhodnem dogovoru. Cena po dogovoru, nakladanje na tovornjak vključeno. Možna dobava po celem svetu. Podatki na tej strani so zbrani po najboljših močeh, vendar za točnost ne moremo jamčiti. Stroj primerljiv s proizvajalci kot so Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron in Biglia. Prav tako na voljo CNC stružnice, obdelovalno-rezkalni centri ter rezkalni stroji.

Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stružnica z nagnjeno posteljo Okuma. Premer vpenjalne glave: 200 mm, premer obhoda: 400 mm, premer struženja: 300 mm, dolžina struženja: 470 mm, število orodnih mest: 8. Dimenzije stroja X/Y/Z: cca 4000 mm/2150 mm/2150 mm, teža: cca 5500 kg, krmiljenje: OSP 3000 L. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Kledpoyttwzofx Adkep

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC stružnica Okuma Genos L3000 e MYW Krmilnik: OSP-P300LA-e Leto izdelave: 2021 Maks. premer obdelave: 390 mm Premer nad prečnim suportom: 260 mm Maks. dolžina struženja: 500 mm Pomiki: X-os: 235 mm Z-os: 450 mm Y-os: ±50 mm C-os: 360° / 0,001° Revolver: 12 mest – vsi pogonski Število obratov: 38 - 3.800 obr/min Vpenjanje orodja: VDI 40 Dodatna oprema/izbira: - transporter ostružkov - touch setter - one Touch IGF - zbiralnik delov - ojačan hladilni sistem 8 bar - odsesavanje Klsdpfxoyt E A Ns Adkjp

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, hitrost vretena (min.): 5.000 obr/min, potovalna razdalja osi X: 700 mm, pomik osi Y: 800 mm, pomik po osi Z: 700 mm, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 25 obr/min, vrsta vhodnega toka: trifazni, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, TEHNIČNE PODROBNOSTI 2x paleti 500 x 500 mm Hodi X: 700 mm, Hodi Y: 800 mm, Hodi Z: 700 mm Velikost mize: 500 mm x 500 mm, rotacijska miza/B-os: indeksirana v korakih po 1°, 360 pozicij Nosilnost mize: 800 kg Hitrost vretena: 5.000 o/min Kjdpfx Adsyrgzkjkelp Razdalja med čelom vretena in zgornjo površino mize: 150 mm - 850 mm Vpenjanje orodja: MAS BT 50 Orodni magazin (ATC): 60 mest, verižni magazin Maksimalna dolžina orodja: 450 mm PODROBNOSTI STROJA Krmiljenje: CNC OSP 100M Dimenzije & Teža Teža stroja: 21.000 kg Dimenzije (D x Š x V): 5.500 x 3.160 x 3.300 mm Število ur vretena: 18.500 OPREMA Transporter za odrezke, hladilna naprava in sistem z žepnimi filtri za notranje hlajenje

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Commissioning: As Okuma stock machine 09.2017 Controller: OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Spindle bore Ø 112 mm Motor power 32kW Torque 955Nm ▪ Hollow clamping cylinder Ø 127mm SMW VNK 320-127 with bore Ø 127mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance, self-cleaning function ▪ Drum-type sump filter TMF300 with clean tank 980l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on lower turret (not possible in combination with driven tools for the lower turret) ▪ Door automation ▪ Robot interface Type E for connecting additional loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50-4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations With cylindrical roller guide in ZB-axis With slideway in XB-axis ▪ Collision Avoidance System (CAS) in real time ▪ 19" Color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical monitor and tilt-adjustable keyboard ▪ Second operating system Windows 7 for operation and open, unrestricted use for Windows 7-compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with stroke +150 / -150 = 300mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20bar pressure Including bag filter, external cooling for tool spindle, pump with max. 3bar pressure ▪ Tooling system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (when using standard chuck) for secure setup ▪ Machine management MacMan with integrated BDE (machine data collection) ▪ Part program storage 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 interfaces ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation by periodic speed variation ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation + / - 0.1° Klodpfx Adeyviigokep

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, OKUMA LCC15, OSP 700L, napenjalna glava za vpenjalne tule, transporter za ostružke, črpalka za hladilno tekočino, touch setter, transporter za ostružke, pobiralnik delov, V12 revolver z direktnim vpenjanjem, Zelo kompakten in dober stroj za obdelavo palic. Kljdpoyq S E Ssfx Adkop *Podajalnik palic LNS je priložen brezplačno ob stroju, ni del prodaje in ga mora elektronsko obnoviti tehnik LNS.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 460 mm, pomik po osi Z: 460 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP P200M, skupna višina: 2.950 mm, skupna dolžina: 2.900 mm, skupna širina: 2.600 mm, premer vrtljive mize: 400 mm, vrtljajska hitrost (min.): 25 obr/min, največja hitrost vrtenja: 15.000 obr/min, skupna masa: 8.000 kg, delovne ure vretena: 18.500 h, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, OKUMA MU-400V avec commande CNC OKUMA OSP P200M Centre d’usinage CNC 5 axes Klsdpsyq Sl Ejfx Adksp Entraînement de broche 50-15 000 tr/min (ISO40/BIGPLUS) 22 kW / 198 Nm Changeur d’outils SK40 selon DIN 69871 (BT40) Changeur d’outils avec 32 emplacements de magasin Système de refroidissement de la tête de broche à commande électronique Système de compensation thermique et de ventilation du bâti machine pour compenser ou réduire les erreurs thermiques (TAS-S et TAS-C) Alimentation en liquide de refroidissement via la broche 15 bar / 20 l/min Convoyeur à copeaux à vis double pour l’évacuation des copeaux de la zone de travail Taraudage synchronisé et fraisage de filetage Volant électronique amovible 100 points zéro pièce 200 corrections de longueur et 200 corrections de rayon d’outil Affichage couleur LCD Dialogue d’assistance OKUMA I-MAP 2 ports USB 2.0 Interface Ethernet avec navigateur et DNC-T1 pour transfert de programme Système de refroidissement par douche dans la zone de travail Convoyeur à copeaux à bande charnière, hauteur d’éjection 1000 mm Surveillance de bris d’outil et mesure de longueur d’outil

Stanje: dober (rabljeno), Leto izdelave: 2005, The machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock and spindle nose: 2,505 mm Y-axis: 250 mm Main spindle speed up to 3,500 rpm Spindle power: 30 kW Lower turret with 12 stations Milling spindle, infinitely variable B-axis Magazine with 80 positions HSK 100 tool holder Three-jaw chuck, diameter 315 mm In 2023, the cable drag chain of the W-axis including all hoses was replaced. In October 2024, the linear guides of X/Y/Z axes were replaced. Work carried out by Okuma: - Machine cleaned - Sheet metal and covers removed - 8th axis removed - Gantry dismantled and lifted out of the machine, ATC dismantled and lifted out Kjdpfjyt Nvtjx Adkolp - All linear guides dismantled - Bearing surfaces of the ZA axis cleaned - New linear guide ZA (including shoes) fitted and tightened to specified torque - New ball screw ZA (including bearing) installed - Base plate of the gantry installed and tightened to specified torque at the shoes, lubrication lines connected - ATC including attachments installed and connected - New linear guides YA and XA installed and tightened to specified torques; new ball screw YA (including bearing) installed - Gantry inserted and lubrication lines connected; base plate XA mounted and aligned - 8th axis mounted and aligned - H1 turret mounted o Mount drive motor for the 8th axis o Assemble 8th axis and new H1, set geometry o Functional test for 8th axis and H1 o Run-in program for B axis approx. 12h, then drain old oil from 8th axis o Run-in program for H1 and defect report for OEG o Mount left door and adjust various sheet metal parts o Install chuck o Adjust zero points o Check tool change

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 560 mm, pomik po osi Z: 460 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP P200M, dolžina obdelovanca (maks.): 300 mm, skupna višina: 2.850 mm, skupna dolžina: 3.200 mm, skupna širina: 2.900 mm, širina mize: 560 mm, višina mize: 800 mm, dolžina mize: 1.300 mm, skupna masa: 8.000 kg, hitrost vretena (min.): 25 obr/min, največja hitrost vretena: 15.000 obr/min, premer orodja: 125 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, OKUMA MB56 VA Ksdpfx Adoyq R I Sekolp OSP P200M, ATC za 32 orodij SK40, transporter za ostružke, žepni filter za notranje hlajenje, 15000 o/min, Povprašajte po našem celovitem paketu: nakladanje, transport, vnos, zagon in servis.

Stanje: dober (rabljeno), Leto izdelave: 2004, CNC stružno-rezkalni center z 9 CNC osmi, Okuma Mac Turn 350 W, letnik 2004, OSP-E 100L, 80 Ww fac, vpenjalni sistem HSK 63, brezstopenjska B os kot rezkalno vreteno, spodnji revolver 12-pozicijski z gnanimi orodji, Kompaktna filtrirna naprava Interlite 900 l, odsesavanje, čas delovanja vretena približno 18300 h, transporter za odrezke, popolnoma obnovljena roka orodnega menjalca, visokotlačno hlajenje, merilna roka za orodja, servisiran menjalnik orodij, glavna vretena Kitagawa B - 210, proti-vreteno Kitagawa B - 208. Ksdpfx Adsyt H U Tjkelp

Stanje: dober (rabljeno), Leto izdelave: 2002, Ref. št.: 10434 Proizvajalec: OKUMA Tip: LC 40 Leto izdelave: 2002 Vrsta krmiljenja: CNC Krmiljenje: FANUC 18-i TB Lokacija skladišča: Halberstadt Država izvora: Nemčija Število vrtljajev: 10 - 2.800 vrt/min Prehod palice: 91 mm Premer vpenjalne glave: 450 mm Premer konjička: 120 mm Premer struženja: 550 mm Dolžina struženja: 800 mm Obodni premer: 800 mm Ksdpfxeym Na Eo Adkslp Prehod vretena: 90 mm Vpenjalna glava vretena: A2-8 Pomik pinole konjička: 150 mm Skupna potrebna moč: 44 kW Približna teža stroja: 8 t Število orodnih postaj: 12 kos.

Stanje: rabljeno, Deli so bili odstranjeni iz proizvodnih naprav, ki so delovale do ustavitve. Stanje: rabljeno (delujoče) Kledoyn R S Eopfx Adkjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Okuma GENOS L2000-e Leto: 2018 Največji premer struženja (mm): Ø200 Največja delovna dolžina (mm): 380 Pomiki X osi (mm): 165 Pomiki Z osi (mm): 400 C-os: 360° (koraki 0,001°) Hitrost vretena (min⁻¹): 5.000 Priključek vretena: JIS A2-6 Tip revolverske glave: V12 VDI (aksialna) Število orodij: 12 (L/M) Zunanje držalo orodja (mm): 20×20 Notranje držalo orodja (premer mm): Ø32 Hitrost vretena za rezkalno orodje (rpm): 6.000 Hitri pomik (X, Z) (m/min): X:25, Z:30 Hitri pomik (C) (rpm): C:200 Premer konjičeve puše (mm): Ø90 Stožčasta odprtina: MT.5 (vrteče središče) Pomik puše konjiča (mm): 100 Motorji, glavno vreteno (20min/kont.) (kW): VAC15/11 Rezkalno vreteno – moč (kW): PREX 4.0/1.8 (25min/neprekinjeno) Motor hladilne črpalke (kW): 0,8 Dimenzije stroja Višina (mm): 1.620 Tloris (mm): 2.100 × 1.850 Teža (kg): 3.700 Dodatna oprema/možnosti: - C-os - Statična orodna držala - Konjič - Nožni pedal za vpenjalo in konjič - Sredinska puša za konjič - Transporter za odrezke Klsdpfx Aoyk Hwiodkjp - Rezervoar za hladilno tekočino - LNS dovajalnik - Dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 1992, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 560 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: Okuma OSP5020M, skupna višina: 2.700 mm, skupna dolžina: 2.500 mm, skupna širina: 2.500 mm, največja hitrost vrtenja: 8.000 obr/min, skupna masa: 4.000 kg, največja hitrost vretena: 8.000 obr/min, delovne ure vretena: 10.000 h, dovod hladilne tekočine: 5 letvica, število mest v zalogovniku orodij: 18, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, CNC Milling Machine Okuma VR40 Kjdpfx Adeyha R Rskelp Year of manufacture: approx. 1992 3 axes, X=560mm, Y=450mm, Z=450mm travels. Spindle speed: 8,000 rpm, SK40 taper Spindle hours: approx. 10,000h Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Tool magazine with 18 stations Various tool holders with assorted tools The machine was originally used in a sheltered workshop and has also only been used occasionally in our facility. It is in very good condition; both the axes and the spindle run smoothly and quietly. Machine accuracy is very high. The machine can be powered up and inspected on our premises. The machine is sold with three vises and the accessories shown in the photos. Complete documentation is available. Two tool stations are defective because the plastic grippers are broken. They can be replaced with new grippers. Normally, the machine has 20 tool stations. This has never been an issue for us over the years.