Oht nakup rabljenega (44)

Stanje: dober (rabljeno), Heidelberg OHT „windmill” Letterpress Stroj za izsekovanje, tiskanje, utiskivanje, perforacijo, številčenje itd. Stanje stroja je zelo dobro, po opravljenem pregledu. 100% original, brez modifikacij. To je stroj iz zadnje serije proizvodnje, posebnost te izvedbe so ekskluzivne valjčne klešče, predal pod strojem, velika zaščitna pokrivala za kolesa in rdeč gumb na batni ročici. Sistem za nanos barve. Popoln komplet dodatkov in orodij. Gtedswxtb Sjpfx Ab Esw Format stroja 26x38 cm Teža papirja do 600 g/m² Hitrost 5000 pol/h Teža 1200 kg Napajanje 400V Popolnoma kompleten, dva okvirja, rezervni deli, priložena dokumentacija. Zelo redka naprava na trgu.

Stanje: rabljeno, Leto izdelave: 1959, Heidelberg OHT je bil izdelan leta 1959 in je stroj v formatu A4. Trenutno je v proizvodnji in se nahaja v Nemčiji. Dobavni pogoji so FCA. Format: A4 Oprema: Knjigotiskarski stiskalnik – stiskalnik za izsekavanje Izsekalna sila 40 ton Min. format: 40 x 70 mm Gtedjvfxwtspfx Ab Esw Standardni okvir: 260 x 340 mm Hitrost min.: 2.200 vrt./min – maks. 5.500 obratov na uro

Stanje: rabljeno, Platen Printing Press - Die Cutting Press / Letterpress Platen - DIE Cutter Heidelberg OHT Year: 1983 - Serial No.: 194543 Minimum size: 40 x 70 mm - Maximum size: 260 x 380 mm Speed: min. 2,200 sph - max. 5,500 sph Standard chase: 260 x 340 mm Skeleton chase: 260 x 350 mm Complete with tools and accessories including chase frame Gedpfjv Hw Hijx Ab Eetw Online video inspection via WhatsApp, MS Zoom, or Telegram In stock in Emskirchen/Nuremberg - Immediately available - Testable

Stanje: rabljeno, Buchdrucktiegel - Stanztiegel / Letterpress Platen - DIE Cutter Heidelberg OHT Year: 1969 - Serial No.: 171075 N Minimum size: 40 x 70 mm - Maximum size: 260 x 380 mm Speed: 2,200 sph (min) - 5,500 sph (max) Standard chase: 260 x 340 mm Skeleton chase: 260 x 350 mm Complete with tools, accessories, and chase frame Online video inspection available via WhatsApp, MS Zoom, or Telegram Gsdjv E Niajpfx Ab Ejtw In stock in Emskirchen/Nuremberg - Available immediately - Can be tested on-site

Stanje: rabljeno, Leto izdelave: 1966, številka stroja/vozila: 155017, Platen printing press - Die-cutting press / Letter Press Platen - DIE Cutter Heidelberg OHT Year: 1966 - Serial No. 155017 N Minimum size: 40 x 70 mm - Maximum size: 260 x 380 mm Speed: 2,200 sph (min) - 5,500 sph (max) Standard chase: 260 x 340 mm Skeleton chase: 260 x 350 mm Gjdsh Axiqspfx Ab Eetw Complete with tools and accessories, including closing frame Online video inspection possible via Skype We would be pleased to arrange your visit – more machines available in stock Available immediately – Inspection possible Location: Emskirchen / Nuremberg – Test run possible

Stanje: rabljeno, Leto izdelave: 1957, številka stroja/vozila: 120523, Platen printing press – die-cutting platen / Letter Press Platen – DIE Cutter Heidelberg OHT, year 1957 – serial no. 120523N Minimum format: 40 x 70 mm, maximum format: 260 x 380 mm Speed: min. 2,200 sph – max. 5,500 sph Standard chase: 260 x 340 mm Skeleton chase: 260 x 350 mm Complete with tools and accessories including chase frame Online video inspection possible via Skype video We would be pleased to welcome your visit – more machines available in our stock Immediately available – can be inspected Gsdpfeh Ayhrex Ab Ejtw Located in Emskirchen/Nuremberg – test runs possible on site

Stanje: rabljeno, Leto izdelave: 1963, številka stroja/vozila: 142, Tiegeldruckpresse - Stanzmaschine Mindestformat: 40 x 70 mm – Maximalformat: 260 x 380 mm Gsdpfsmi U Nmex Ab Eetw Druckgeschwindigkeit: min. 2.200 Bg./Std. – max. 5.500 Bg./Std. Standard-Satzrahmen: 260 x 340 mm Sonder-Satzrahmen: 260 x 350 mm Komplett mit Werkzeugen und Zubehör einschließlich Rahmen Online-Video-Inspektion per Skype möglich Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – kann besichtigt werden Lagerstandort: Emskirchen/Nürnberg – Test vor Ort möglich

Stanje: rabljeno, Locking frame – Frame OHT Letter Press Heidelberg OHT A4-24 Frame OHT Platen - 8 frames for KS cylinder - 1 frame for KSB cylinder - 2 frames for S cylinder Gedpfx Absrffmze Estw - 4 frames for SBG cylinder - 1 frame for Adast GP platen Online video inspection via Skype video possible. We would be delighted with your visit – more machines in stock. Available immediately – ready for inspection. Located in Emskirchen / Nuremberg – test runs possible.

Stanje: rabljeno, Leto izdelave: 1974, številka stroja/vozila: 186403, Platen printing press – Die cutting press / Letter Press Platen – DIE Cutter Heidelberg OHT, Year 1974 – Serial No. 186 403 N Godeh Eg Tbspfx Ab Ejtw Format range: min. 40 x 70 mm – max. 260 x 380 mm Speed: min. 2,200 sph – max. 5,500 sph Standard chase size: 260 x 340 mm Skeleton chase size: 260 x 350 mm Complete with tools, accessories, and locking frame Online video inspection via Skype available We would be pleased to welcome you for a visit – more machines in stock Available immediately – Inspection possible Located at Emskirchen / Nuremberg – Machine can be tested

Stanje: rabljeno, Leto izdelave: 1953, številka stroja/vozila: 43717, 1-Farben-Offsetdruckmaschine, Serien-Nr. 43717 Online-Videoinspektion per Skype-Video möglich Gtedpfotzc E Nsx Ab Eow Wir freuen uns sehr über Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Testlauf möglich

Stanje: rabljeno, Leto izdelave: 1964, številka stroja/vozila: 149218, Platen printing press - die-cutting platen / Letterpress platen - DIE Cutter Heidelberg OHT, year 1964 - Serial-No. 149218 N Gsdpoh Eg Tfsfx Ab Eetw Size range: min. 40 x 70 mm – max. 260 x 380 mm Speed range: min. 2,200 sph – max. 5,500 sph Standard chase: 260 x 340 mm Skeleton chase: 260 x 350 mm Complete with tools and accessories including locking frame. Online video inspection possible via Skype video. We would be delighted to welcome your visit – further machines in stock. Available immediately – viewing and testing possible on site. Located in Emskirchen / Nuremberg – machine can be inspected and tested.

Stanje: rabljeno, Leto izdelave: 1962, številka stroja/vozila: 137806, Platen Printing Press – Die-Cutting Platen / Letterpress Platen – DIE Cutter Heidelberg OHT Year: 1962 – Serial No.: 137806 N Minimum size: 40 x 70 mm – Maximum size: 260 x 380 mm Speed: minimum 2,200 sph – maximum 5,500 sph Standard chase: 260 x 340 mm Skeleton chase: 260 x 350 mm Complete with tools, accessories, and chase frame Online video inspection possible via Skype video We would be delighted to welcome your visit – more machines available in stock Available immediately – Inspection possible Godsh Axu Hepfx Ab Eetw In stock in Emskirchen / Nuremberg – Test runs possible

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 110064, A4-Format Gtedpfx Ajf Swvasb Esw Standardmaschine

Leto izdelave: 1967, stanje: dober (rabljeno), številka stroja/vozila: T161047N, A4 format Standard equipment Gtedpfx Ajkhgzfob Ejw

Stanje: rabljeno, Leto izdelave: 1964, Printing units 1 Max. sheet printing speed: 5500 sheets/hour Max. sheet size: 26 x 38 cm Machine no. 145.346 Includes HAKRO hot foil stamping unit Gjdpfx Aowh Ukaob Estw

Stanje: rabljeno, Leto izdelave: 1973, The Heidelberg OHT, manufactured by Heidelberg in 1973, is a robust machine designed for printing and die-cutting applications. It offers an A4 format and is currently stored in Germany. This press, with machine number T 184634 H, delivers a die-cutting force of 40 tons and can handle a minimum format of 40 x 70 mm. It operates at speeds ranging from a minimum of 2,200 revolutions per minute up to a maximum of 5,500 impressions per hour. The machine is equipped with a skeleton frame measuring 260 x 350 mm and a standard frame of 260 x 340 mm, with a maximum format of 260 x 380 mm. It is supplied complete with accessories and a chase frame, and features both a letterpress plate and a die-cutting plate. Delivery condition is FCA (Free Carrier). Format: A4 Speed: 5,500 impressions/hour Power: 380 V, 1.25 kW Net weight: 1,100 kg Dimensions: L1.68 x W1.24 x H1.85 m Gtodpevfxu Ejfx Ab Ejw Equipment: - Skeleton frame: 260 x 350 mm - Speed: min. 2,200 rpm – max. 5,500 impressions/hour - Max. format: 260 x 380 mm - Letterpress platen – die-cutting platen - Die-cutting force: 40 tons - Min. format: 40 x 70 mm - Complete with accessories and chase frame - Standard frame: 260 x 340 mm - Machine No. T 184634 H

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm – 200mm, for loading with electric pallet truck or forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Gtedjykuhcopfx Ab Eow Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at stretch start and cycle end Emergency stop button in accordance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All machine parameters adjustable via display F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage lift speed upwards from 1.3 to 5.4 m/min F04 – Carriage lift speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Pallet wrap height setting F62 – Ergonomic film change height ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a set height (disabling photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification max. outside diameter Ø 250 mm – core Ø 76mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Other units available from stock at short notice.

Leto izdelave: 2026, obratovalne ure: 2 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_03, Exhibition machine – like new. EVA Turntable / base frame raised / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Base frame raised by 150mm–200mm, adjustable for loading with electric pallet truck Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up and down Acoustic signal at cycle start and at cycle end Emergency stop switch in accordance with CE regulations Turntable always stops in the same start position Fall protection for the film carriage Push buttons for machine power-on and start & stop functions, compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 – Continuously adjustable turntable speed 5–12 rpm Carriage speed independently adjustable up and down F03 – Carriage speed up: 1.3–5.4 m/min F04 – Carriage speed down: 1.3–5.4 m/min F05 – Number of wraps at pallet base (1–10 revolutions) F06 – Number of wraps at pallet top (1–10 revolutions) F09 – Setting of pallet wrapping height F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Simple wrapping (either upwards or downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a stored height (photoelectric sensor deactivated) F29 – Soft-start cycle for application of edge protection Soft-start to reduce film tears on sharp pallet edges Gtedpfxeykud De Ab Ejw FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Maximum outside diameter Ø 250 mm – Core Ø 76 mm – Height = 500 mm Standard power requirements: 230 V – 1N+PE – 50 HZ Total output: 1.2 kW / 6 A Other systems available immediately from stock.

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), A high-temperature tube furnace from Thermconcept is available. Max. temperature: 1700°C, heated length: 200 mm, tube diameter/length: 60 mm/600 mm, power: 3.3 kW, dimensions (W/D/H): 460 mm/530 mm/830 mm. Documentation available. Gtjdpfxjtxb Avo Ab Eew

Stanje: rabljeno, prevoženi kilometri: 44.855 km, moč: 75 kW (101,97 KM), prva registracija: 04/2021, vrsta goriva: dizel, skupna masa: 2.345 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, Leto izdelave: 2021, Oprema: centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Equipment: * Body/Structure: Box van * Cool & Sound Package 1 * Air conditioning * Driver's seat height adjustment (6-way) * Tow bar * Bulkhead * Load compartment floor (wood) * Sliding door on the right * Rear wing doors * Increased payload Technology: * Multimedia audio system * Steering wheel-mounted audio controls Gtsdpewggtqofx Ab Eow * Bluetooth hands-free system * Cruise control * Luggage compartment lighting (LED) Safety/Environment: * Driver/passenger airbag * ABS/ESP * Driver assistance system: Hill Start Assist (HSA) * Driver assistance system: Trailer Stability Program (TSP) * Low emissions according to Euro 6d-TEMP * Start/stop system Miscellaneous: * German first delivery * 1 previous owner * Engine: 1.5 litre – 75 kW CDTI DPF * Wheelbase: 2,785 mm * Payload: 700 kg as per registration certificate Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly stocks around 200 vehicles from the areas of vans, commercial vehicles and construction machinery! We continuously offer you attractive financing options at favorable special conditions. If interested, we are happy to provide you with a tailored offer! Trade-in of your commercial vehicle/construction machinery is welcome. Should a new TÜV inspection be required, we can obtain an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible by our external partners at an additional cost. Details provided in advertisements, on the internet, price tags, and pictures are non-binding descriptions and do not represent guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment must be checked individually if necessary. Subject to error and prior sale.

Leto izdelave: 2020, obratovalne ure: 250 h, stanje: rabljeno, dvižna višina: 5.000 mm, prosto dvigovanje: 1.250 mm, tip droga: triplex, gradbena višina: 2.950 mm, dolžina vilic: 2.400 mm, širina nosilnega okvirja vilic: 2.050 mm, vrsta pogona: Elektro, nosilnost: 12.000 kg, Heavy-Duty Forklift - Electric Load Center: 600 mm Fork Width: 200 mm Fork Thickness: 70 mm ISO Class: Pin-Type Mast Type: Triplex Condition: As new Technical Condition: Very good Front Tires Type: Non Marking Front Tires Size: 9.00 - 20 Front Tires Condition: 80 - 100% Rear Tires Type: Non Marking Rear Tires Size: 355 / 65 - 15 Rear Tires Condition: 80 - 100% Battery Voltage: 96V Battery Capacity: 1550Ah Battery Manufacturer: TAB Battery Type: PzS Battery Year: 2020 Battery Condition: 80 - 100% Gtjdpfx Aot Dfa Ueb Esw Side shifter, fork positioner, 3rd valve, 4th valve, Full cabin with heating, complete lighting system

Stanje: skoraj kot novo (rabljeno), 1 unused universal milling head in elevated design for retrofitting to conventional, NC, or CNC milling machines or boring mills of any kind, "HURON" system, swivels on 2 planes, all angles adjustable Spindle taper: ISO 40 Overhang: approx. 360 mm D8ot3uy Rated drive power: 10 HP Max. speed: 1800 rpm Weight: approx. 82 kg Accessories / Special features: • With adapter plate in elevated design featuring an additional helical gear • Manual tool clamping • Main spindle and all shafts and gearings are made of case-hardened and tempered chrome-nickel steel • 2 mutually rotatable axes, allowing infinite angle adjustment – "HURON" system • Taper gearings ground according to the "KLINGELNBERG" system • Main spindle bearings are high-precision tapered roller bearings • 1 helical drive gear • 1 pull stud for tool clamping Gsdpobpmw Nsfx Ab Ejtw • Operating manual Delivery time: immediately available, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Stanje: rabljeno, največja dovoljena obremenitev: 13.900 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2009, dolžina tovornega prostora: 7.750 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.700 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, Leto izdelave: 2009, Oprema: dvižna zadnja plošča, 2-ACHSER HEIWO ANHÄNGER TOP ZUSTAND Kofferaufbau: Vollisoliert, HEIWO Fahrgestell: HTF HWA 20MZ Gtedpfjx Ami Iex Ab Eow Kühlung: Carrier TRS Iceland Erstzulassung: - TÜV: - Innenmaße (L x B x H): 775 x 250 x 270 cm Leergewicht: 6.100 kg Nutzlast: 13.900 kg Zul. Gesamtgewicht: 20.000 kg Federung: Luftfederung Achsen: BPW-Achsen mit Scheibenbremsen Bereifung: 265/70 R22.5 Zwillingsbereifung Profiltiefe Reifen Achse 1: L30%, R30% Profiltiefe Reifen Achse 2: L50%, R50% Ausstattung: - ABS, EBS - Vollisolierter Kofferaufbau von HEIWO - Extrem stabiler Aufbau und Boden - 5x Edelstahlprofile mit Stangen an der Decke - Carrier TRS Iceland Kühlaggregat (betrieb über Fahrzeug oder 380V) - BPW-Achsen mit Scheibenbremsen - Zusatzscheinwerfer - 2.000 kg Bär Ladebordwand - Lückenlose Servicehistorie - Sofort verfügbar und einsatzbereit SEHR SCHÖNE NIEDERLÄNDISCHE KOMBINATION SEHR GEPFLEGTER ZUSTAND SOFORT VERFÜGBAR Weitere technische Daten: * Länge: 9.830 mm * Leergewicht: 6.100 kg * Achstyp / Hersteller 1. Achse: Goodyear / Sonstige * Reifengröße 1. Achse: 265/70 R19.5 * Reifenprofiltiefe 1. Achse: außen links 30%, innen links 30%, außen rechts 30%, innen rechts 30% * Max. Achslast 1. Achse: 10.000 kg * Achstyp / Hersteller 2. Achse: Goodyear / Sonstige * Reifengröße 2. Achse: 265/70 R19.5 * Reifenprofiltiefe 2. Achse: außen links 30%, innen links 30%, außen rechts 30%, innen rechts 30% * Max. Achslast 2. Achse: 10.000 kg * Radstand: 181 cm * Ladebordwand: Hersteller BÄR, Tragkraft 2.000 kg * Achsposition: hinten * Bremse: Scheibenbremse * Aufhängung: Luftfederung * Zwillingsbereifung: ja Weitere Ausstattung: * Homepage * SemCollection * SemStars Semtrade B.V. Ansprechpartner: Martin Klaaijsen | Tel: | Whatsapp: | E-Mail: Exportkosten: Bitte informieren Sie sich vorab über die Kosten und den Ablauf in Ihrem Land Standort: Maasdijk (NL) | 140 km bis zur Grenze | 20 km bis Flughafen Rotterdam The Hague Haftungsausschluss: Änderungen, Zwischenverkauf und Irrtümer vorbehalten

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1980, Tehnični podatki: Linija za izdelavo žebljev vključuje: 1. Wafios N3 2. Wafios S75 3. Wafios S110 Gtodpfx Ajit Rdwjb Esw 4. Vitari V14R 5. Vitari V17R 6. Moroni SPN 200 7. Wafios brusilni stroj MSD 500 8. Polavtomatska enota za pakiranje – 1-5 kg 9. Boben za čiščenje in poliranje žebljev – 2x400 kg/h Premer žice: 1,2–6,0 mm Dolžina žebljev: 10–200 mm Kapaciteta: 900 kg/h

Stanje: dober (rabljeno), Leto izdelave: 1976, Wire diameter range: Gedpfed Im Nuox Ab Eotw a) Single wire: 2.2 - 3.8 mm b) Double wire: 2.2 - 3.4 mm Nail lengths: 10 - 80 mm Output: 300/600 nails/min.