Oerlikon nakup rabljenega (56)

Stanje: rabljeno, Excellent welding quality with advanced processes and capabilities • New inverter generation with 30% lower power consumption compared to conventional devices. This performance achieves significant energy cost savings. • More than 100 synergy characteristic curves for nearly all base materials (factory equipped) • Wide process range: - MIG/MAG Standard Bwsdpowwtwdefx Aa Ssh - MIG/MAG Pulse - MIG/MAG Special Arc Types - MIG Brazing - Manual Metal Arc Welding (basic, rutile, cellulosic) - Gouging up to 8.0 mm electrode diameter • High-performance units up to 500 A at 60% duty cycle • Automation interface A1, no additional cards required for simple analog integration • 99 memory locations • Password-protected parameter locking (fine adjustment within +/-20% remains possible) • Program selection via torch trigger • Simple polarity change

Stanje: dober (rabljeno), BALZERS LTE 020 – Termično nadzorovana postaja za pripravo vzorcev ✔ Uporaba: tehnologija premazov, obdelava polprevodnikov, analiza površin, elektronska mikroskopija/ Bsdpfxoxl A Eds Aa Sowh • Digitalna prikazovalna enota s 4 kanali (B1–B4) • Prikaz temperature v °C • Nastavitev preko SET / UP / DOWN • Ločeno upravljanje za omrežje in svetilko • Napajanje: 220 V Opomba: Za podrobne tehnične podatke in navodila za obdelavo priporočamo, da se posvetujete z originalnimi podatkovnimi listi ali neposredno pri proizvajalcu. Več artiklov – novih in rabljenih – najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Brand: Oerlikon / SAF Model: LP100 Year: 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm Rotational speed: 100-1200 mm/min Bwjdpfolffdysx Aa Sjh Wheel width: 235 mm Wheel diameter: 450 mm Distance between travel wheels: 1930 mm (between flanges) Travel speed: 4 m/min Equipped with wired remote control with buttons for rotation direction, variable speed control, and travel of the turning device. Power supply: Three-phase 380V Supplied with manual and CE documentation.

Stanje: skoraj kot novo (rabljeno), Rotary vane vacuum pump in oil bath. Available in stock. Pump fully overhauled. Comes with warranty. Nominal flow rate: 300 m³/h Bsdpfoftzzgex Aa Sewh Ultimate vacuum: 0.1 mbar abs. For any questions, please contact us.

Stanje: dober (rabljeno), Leto izdelave: 2002, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m Bwsdpfew N S E Ajx Aa Ssh In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. Bwjdeul Efmepfx Aa Sjh If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data