Nty nakup rabljenega (11.227)

Stanje: novo, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles Bedpfxex Avyce Afqelr - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: rabljeno, No. 3247 Nissan PD011A15PQ Counterbalance Forklift / 1.5 Tonnes Used, year of manufacture 2007 Fuel type: LPG Load capacity: 1,500 kg Triplex mast Lift height: 4,500 mm Free lift: 150 mm Nissan engine 35 kW Transmission: automatic Sideshift Fork length approx. 1,100 mm Overall height above roof approx. 2,200 mm Overall length incl. forks: 3,360 mm Overall width approx. 1,010 mm Forklift is fully operational / Engine is dry / No oil leaks Transport dimensions (LxWxH) approx. 3,700 x 1,150 x 2,200 mm Weight approx. 3,000 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport, or installation Dismantling, loading, and transport by us available upon request Errors in description and price excepted To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale as-is Technical details, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Bledpfx Afsxq Hc Deqjr For used machines, any warranty is excluded—the item is sold "as seen" Pictures and videos are for reference only and do not represent the actual delivery scope Payment terms: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 15.996 h, skupna masa: 6.750 kg, vhodna napetost: 400 V, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Bjdpetwliwefx Afqslr Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!

Stanje: novo, Laser power: 4 Working area: 1500 x 3000 mm Load capacity: 1200 kg X-axis travel: 1520 mm y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Dimensions (L x W x H): 10,000 x 400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with upper-class standards. With support for laser power up to 30,000 W, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment. This is an ideal cutting machine for everyone looking to outsource cutting operations. The wireless remote control allows simple blowing, cutting, pausing, calibration simulation, and more. The standard nesting software enables parts to be nested for cutting quickly and without operator intervention. Flycut cutting functionality is also included. As a double shuttle table system, operation can continue without downtime between sheets. All our machines are manufactured to European standards and come with CE certification. Our FLC model machines feature nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and an auto-view function that detects obstacles and moves automatically. Cutting heads are equipped with automatic cooling. The bridges used in all our machines are made from a single-piece welded aluminum alloy plate construction. The one-piece design ensures bridge stiffness and prevents deformation when subject to impacts, overlaps, or loads. In addition, due to their structure being three times lighter than steel profile bridges, high speeds and acceleration are achieved with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic autofocus head - Nesting software - 19" CNC touch control - Fly cutting functionality - Starter kit with nozzles and lenses - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote diagnostics - Automatic lubrication system Bedpfx Asruwazsfqelr - Dual camera system SPECIFICATIONS VALUE Working area 1500 x 3000 mm Load capacity 1200 kg XY-axis travel 1520 x 3030 mm Z-axis travel 300 mm XYZ-axis guide 4-point ball cage XY-axis drive system Rack and pinion Z-axis drive system Ball screw XY-axis speed 100 m/min Z-axis speed 30 m/min XY positioning accuracy 0.05 mm XY repeatability 0.03 mm Table change time 10 sec Laser source Raycus / Hans / JPT Laser source output 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system Fscut Laser cutting head Raytools / BOCI / WSX Supported gases Air/Oxygen/Nitrogen Cooling type Water cooled Machine weight 12,000 kg Machine di...

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 34,57 kW (47,00 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: originalen, skupna masa: 3.400 kg, največja dovoljena obremenitev: 1.000 kg, dvižna moč: 1.000 kg/m, stanje pnevmatik: 100 odstotek, konfiguracija osi: 4x4, število sedežev: 1, emisijski razred: Euro 5, prostornina žlice: 1 m³, širina izkopne žlice: 360 mm, zavore: drugo, vzmetenje: drugo, Leto izdelave: 2025, Oprema: dodatne luči, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, nastavljivo podvozje, nizka raven hrupa, pogon na vsa štiri kolesa, računalnik na krovu, standardna žlica, tempomat, vilice za palete, zadnji pobiralnik, žerjav, NOV YANMAR KOMBI BAGGER!! NOVO !! NEU !! NEW !! 1 LETNA GARANCIJA CENA JE: 32.000 EUR NETTO + DDV NA HRVAŠKEM. IZVEN HRVAŠKE DDV NI PLAČAN!! MOTOR ORIGINAL Yanmar. 47 HP 1 LETO GARANCIJE Bsdpfxow Tkmyj Afqslr TEŽA 3.400 KG ŠIRINA 1,79 m DOLŽINA 6,00 m VIŠINA 2,60 m ZADNJA DELOVNA HIDRAVLIČNA IZKOPNA ROKA 3,90 m IZKOPNA ŽLICA 36 CM RAZLIČNE DIMENZIJE, KLADIVO, ITD. MOŽEN NAKUP. SPREDNJA NAKLADALNA KOŠARA HITRA MENJAVA. 1,00 m2 PALETNE VILE, HITRA MENJAVA! ODGOVARJAMO SAMO NA POVABILA: PROSIMO SAMO RESNE POVPRAŠEVANJA. MENJAVE, RAČUNI ITD. NE VELJAJO LAHKO PRIDOBITE PONUDBO ZA BANČNI KREDIT ALI LEASING V PONUDBI VEČJI KUBOTA 22.000,-€

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 20 km, moč: 102,97 kW (140,00 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 3.500 kg, lastna masa: 2.600 kg, največja dovoljena obremenitev: 900 kg, prva registracija: 10/2025, naslednji pregled (TÜV): 10/2027, dolžina tovornega prostora: 3.400 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 1.600 mm, kapaciteta rezervoarja za gorivo: 90 l, emisijski razred: Euro 6, barva: bela, število sedežev: 3, število prejšnjih lastnikov: 1, Leto izdelave: 2025, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, hladilna enota, klimatska naprava, kompresor, letne pnevmatike, parkirni senzorji, računalnik na krovu, registracija tovornjaka, servovolan, sistem za imobilizacijo, tempomat, EU vehicle with warranty. Fiat Ducato 140 L3H2 refrigerated box, temperature range 0°C to +20°C Refrigeration unit Cargo area: Length - 3,400 mm Width - 1,700 mm Height - 1,600 mm Sliding side door - right, 270° rear wing doors 3-seater cab, Payload - 900 kg, Bljdpfjwlz Hvjx Afqjr Air conditioning, On-board computer, ESP (Electronic Stability Program), Car radio with MP3, USB, Bluetooth, Electric windows, Central locking with remote control, Indicators integrated in exterior mirrors, Spare wheel Delivery, leasing or financing available. Available in approx. 5-10 days. Contact: Auto-Wardenga Irenäus Wardenga (also via WhatsApp)

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, dolžina vilic: 1.200 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg Bodpfx Afjx Avx Soqslr - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: novo, Laser power: 4Loading capacity: 1250x travel: 2020y travel: 4050z travel: 350Positioning accuracy: 0.05Repeatability: 0.03Table change time: approx. 10Cooling system: Water chillerWeight approx.: 11500Dimensions (LxWxH): 4400 x 10000 x 2120 The FLC series is a fast, sensitive, reliable and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine that meets the standards of the upper price class. It can support laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for manufacturing agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for those looking to outsource cutting operations. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. A standard nesting software program very quickly prepares parts for cutting without any operator intervention. It also features a fly-cutting function. The double automatic changing table allows you to continue cutting without downtime. All our machines are manufactured according to European standards and come with a CE certificate. Blodpfx Aferuwbisqor Our FLC machines are equipped with nozzle cleaning and a dual camera system. Choose from cutting area sizes of 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with autofocus and an active anti-collision feature, as well as an auto-view function that detects obstacles and automatically moves. Cutting heads are equipped with automatic cooling. The bridge used in all our machines consists of a welded aluminum alloy sheet construction in a single piece. This unibody design ensures the rigidity of the bridge and prevents deformation due to impacts, overlaps, or loads. Furthermore, the lightweight structure—three times lighter than steel profile bridges—enables high speeds and acceleration with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19" touchscreen CNC control - Fly cutting - Nozzles and lenses starter kit - Scrap collection drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera SPECIFICATIONS VALUEWorking area 2000 x 4000 mmLoading capacity 1200 kgXY axis travel 2020 x 4050 mmZ axis stroke 350 mmXYZ axis guide 4-point ball cageXY axis drive system Rack and pinionZ axis drive system Ball screwXY axis speed 100 m/minZ axis speed 30 m/minXY positioning accuracy 0.05 mmXY repeatability 0.03 mmTable change time 10 secLaser source Raycus / Hans / JPTLaser source output power 2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC control system FscutLaser cutting head Raytools / BOCI / WSXSupported gases Air/O2/N2

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm Bjdpfx Afox Avxxeqolr - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: novo, Laser power: 12 kW | Loading capacity: 1250 kg | X-axis travel: 2020 mm | Y-axis travel: 4050 mm | Z-axis travel: 350 mm | Positioning accuracy: 0.05 mm | Repeatability: 0.03 mm | Table changeover time: approx. 10 s | Cooling system: Water chiller | Weight: approx. 11,500 kg | Dimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, sensitive, reliable, and cost-efficient fiber laser cutting machine. This high-efficiency machine competes with top-tier models and supports a maximum laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutters are commonly used in the production of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and systems. Ideal for businesses seeking to outsource cutting operations. Functions such as blowing, cutting, pausing, calibration simulation, and more are possible via the wireless remote control. Standard nesting software quickly prepares parts for cutting without operator input and includes a flycut function. Blsdoruwbqepfx Afqjr Thanks to its dual exchange table design, cutting operations can continue seamlessly without waiting time. All our machines are manufactured according to European standards and carry a CE certificate. FLC models are equipped with nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus and an active anti-collision function, along with an auto-view function that detects obstacles and automatically adjusts its path. Cutting heads feature automatic cooling. The bridges in our machines are made of one-piece, welded aluminum alloy construction. This design ensures rigidity and prevents deformation from shocks, overlaps, or loads. Moreover, these bridges are three times lighter than steel profiles, enabling higher speed and acceleration with reduced motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Flycut function - Nozzle and lens starter kit - Parts debris drawers - Automatic table exchanger - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS | VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z-axis travel: 350 mm XYZ axis guide: 4-point ball cage XY drive system: Rack and pinion Z-axis drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 s Laser source: Raycus / Hans / JPT Laser output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 34.900 mm, skupna dolžina: 9.040 mm, - Rotating Telescopic Handler RTH 6.35 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 34.90 m - Continuous 360-degree rotation - Engine: Volvo TAD 583 VE, Stage V - Rated power: 175 kW (238 HP) at 2,300 rpm - Maximum torque: 975 Nm at 1,380 rpm - Displacement: 5.13 l - Number of cylinders: 4 in-line - Engine configuration: diesel engine with direct injection and turbocharging - Cooling system: water-cooled intercooler - Drive type: hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Delivery volume: electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox gearbox with 2 speed ranges forward and reverse - Axles and brakes: axle type with planetary final drives - Rear axle: oscillating steering axle with hydraulic lock - Front axle: oscillating steering axle with automatic leveling +/- 8 degrees - Service brake: oil-immersed disc brakes on each axle, hydraulically actuated - Parking brake: negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Maximum travel speed: 40 km/h - Maximum tractive force at hook: 152 kN - Climbing ability: 65% - Turning radius (with forks): 7,000 mm - Diesel fuel: 270 l - AdBlue: 40 l - Hydraulic oil: 220 l - Engine oil: 16 l Bledpfxjx Avwzj Afqsr - Coolant: 40 l - Maximum operating pressure: 350 bar - Hydraulic system type: load sensing - Main pump: Danfoss / Rexroth variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional valve SIL 2 - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: two Danfoss 2-axis joysticks with dead man’s device - Control system: CAN bus technology

Stanje: novo, Laser power: 2Loading capacity: 1250x-Travel (X): 2020mmTravel (Y): 4050mmTravel (Z): 350mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmTable changeover time: approx. 10 secCooling system: water chillerApprox. weight: 11,500 kgDimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system that meets premium-level standards. Capable of supporting laser power up to 30,000 W, it is an excellent choice for cutting thick sheet metal. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and plants. It is an ideal cutting system for those looking to outsource their work. Enables easy blowing, cutting, pausing, calibration simulation, etc., via wireless remote control. Comes standard with nesting software, that quickly and automatically prepares parts for cutting without operator intervention. Also features a flycut cutting function. With a dual exchange table, you can continue cutting without any waiting time. All our machines are manufactured to European standards and feature CE certification. Our FLC machines include automatic nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head offers autofocus, active anti-collision functionality, and auto-view for obstacle detection and automatic movement. Cutting heads are equipped with automatic cooling. All machine bridges are fabricated as one-piece welded aluminium alloy sheet structures. This single-piece design ensures bridge rigidity and prevents deformation during collisions, overlaps, or high loads. In addition, their structure is three times lighter than steel bridges, allowing higher speeds and acceleration with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzles and lenses incl. starter kit - Workpiece debris drawers Blodporuwbxefx Afqjr - Automatic table changer - Automatic nozzle cleaning - CE compliant - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY Travel: 2020 x 4050 mm Z-Axis Travel: 350 mm XYZ Axis Guidance: 4-point ball cage XY Axis Drive System: Rack and pinion Z Axis Drive System: Ball screw XY Axis Speed: 100 m/min Z Axis Speed: 30 m/min XY Position Accuracy: 0.05 mm XY Repeatability: 0.03 mm Table Changeover Time: 10 sec Laser Source: Raycus / Hans / JPT Laser Output Power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC Control System: Fscut Laser Cutting Head: Raytools / BOCI / WSX Support gases: Air / Oxygen / Nitrogen

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 34.900 mm, skupna dolžina: 9.290 mm, - Rotating Telescopic Handler RTH 6.35 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 34.90 m - Continuous 360-degree rotation - Engine: Volvo TAD 583 VE, Stage V - Rated power: 175 kW (238 HP) at 2,300 rpm - Maximum torque: 975 Nm at 1,380 rpm - Displacement: 5.13 l - Number of cylinders: 4 in-line - Engine configuration: diesel engine with direct injection and turbocharging - Cooling system: water-cooled intercooler - Drive type: hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Delivery volume: electronically controlled axial piston pump. Variable displacement motor. Bjdpfx Ajx Avwhefqslr - Transmission: Dropbox gearbox with 2 speed ranges forward and reverse - Axles and brakes: axle type with planetary final drives - Rear axle: oscillating steering axle with hydraulic lock - Front axle: oscillating steering axle with automatic leveling +/- 8 degrees - Service brake: oil-immersed disc brakes on each axle, hydraulically actuated - Parking brake: negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Maximum travel speed: 40 km/h - Maximum tractive force at hook: 152 kN - Climbing ability: 65% - Turning radius (with forks): 7,000 mm - Diesel fuel: 270 l - AdBlue: 40 l - Hydraulic oil: 220 l - Engine oil: 16 l - Coolant: 40 l - Maximum operating pressure: 350 bar - Hydraulic system type: load sensing - Main pump: Danfoss / Rexroth variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional valve SIL 2 - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: two Danfoss 2-axis joysticks with dead man’s device - Control system: CAN bus technology

Stanje: novo, Laser power: 6 kW Loading capacity: 1250 kg Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Bljdpfetwtn Ijx Afqjr Table change time: approx. 15 s Cooling system: water chiller Weight approx.: 17,500 kg Dimensions (LxWxH): 4,400 x 9,500 x 2,350 mm Max. speed: 120 m/min Tube diameter: 220 mm Working area: 2,000 x 6,000 mm The FLC-P Series is a fast, precise, reliable, and cost-effective fiber laser cutting machine for tubes and profiles. It’s a high-efficiency laser cutting machine that meets upper-tier standards and can reach laser power ratings up to 20,000 W, making it a very good choice for thick plate cutting. FLC fiber laser cutters are commonly used in the processing of agricultural machinery, textile machinery, food machinery, construction machinery, elevator manufacturing, and other large machines and plants. You do not need to purchase two separate machines—you can cut both sheet metal and tube profiles with this unit. The compact design saves space. A machine with dual-purpose functionality: capable of cutting both sheet material and metal tubes/profiles. Standard tube/profile cutting length is 6 meters, extendable to 9 meters upon request. The tube diameter can be used up to a maximum of 350 mm. The chucks can clamp and self-center automatically at the push of a button. Wireless remote allows for easy blowing, cutting, pausing, calibration simulation, and more. Standard nesting software quickly nests parts for cutting with minimal operator input and includes a flycut function for rapid straight-line cutting. The double exchange table enables continuous cutting without downtime. All of our machines are manufactured to European standards and come with a CE certificate. Our FLC models feature nozzle cleaning and a dual-camera system. Available working areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and active anti-collision, as well as an auto-view function that detects obstacles and moves automatically. Cutting heads are equipped with active cooling. All bridges on our machines are single-piece welded aluminum plate constructions. This design ensures rigidity, prevents deformation under loads or shocks, and allows high speeds and accelerations due to its lower weight (three times lighter than steel bridges). Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Flycutting - Nozzles and lenses (starter kit included) - Parts scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera SPECIFICATION VALUE Working area:

Stanje: novo, Leto izdelave: 2023, nosilnost: 6.000 kg, dvižna višina: 25.000 mm, dolžina vilic: 1.200 mm, skupna dolžina: 8.830 mm, - Rotating Telehandler RTH 6.25 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 25.00 m - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Max. torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled charge air cooler - Drive type: Hydrostatic - Model: Danfoss/Rexroth - Max. pressure: 480 bar - Delivery volume: Electronically controlled axial piston pump, variable motor - Transmission: Dropbox gearbox with 2 forward and reverse travel ranges - Axle type: Hub reduction with planetary final drives - Rear axle: Oscillating steering axle with hydraulic lock - Front axle: Oscillating steering axle with self-leveling, +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Max. travel speed: 40 km/h - Max. drawbar pull at lifting hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 6,390 mm - Diesel fuel tank: 175 l Bjdpfx Asx Avvwjfqolr - AdBlue: 10 l - Hydraulic oil: 165 l - Engine oil: 9 l - Coolant: 20 l - Max. operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss/Casappa - variable displacement pump - Distributor for boom and upper structure movements: Danfoss – SIL 2 proportional control valve - Distributor for outriggers: Bosch Rexroth – electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: novo, Tlak: 60 Prehod med stojali: 900 x 300 Moč motorja: 3 Hitrost: 8 Hitrost: 13 Dimenzije (D x Š x V): 1500 x 850 x 2450 Teža cca: 700 Hod: 300 Standardna oprema: Visokokakovostna hidravlična stiskalnica, ki omogoča ročno in motorizirano upravljanje. Cilindri so nastavljivi bočno. CE-certificirano Regulacija tlaka Blsdpfx Ajv Akw Hefqjr 1 leto garancije Manometer Uporabniški priročnik (ročni) Razmik med stojali: 900 x 300 mm

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 6.000 kg, dvižna višina: 25.000 mm, skupna dolžina: 8.680 mm, - Rotating Telehandler RTH 6.25 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 25.00 m - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Max. torque: 500 Nm at 1,600 rpm Bedpfxsx Avuye Afqelr - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled charge air cooler - Drive type: Hydrostatic - Model: Danfoss/Rexroth - Max. pressure: 480 bar - Delivery volume: Electronically controlled axial piston pump, variable motor - Transmission: Dropbox gearbox with 2 forward and reverse travel ranges - Axle type: Hub reduction with planetary final drives - Rear axle: Oscillating steering axle with hydraulic lock - Front axle: Oscillating steering axle with self-leveling, +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Max. travel speed: 40 km/h - Max. drawbar pull at lifting hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 6,390 mm - Diesel fuel tank: 175 l - AdBlue: 10 l - Hydraulic oil: 165 l - Engine oil: 9 l - Coolant: 20 l - Max. operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss/Casappa - variable displacement pump - Distributor for boom and upper structure movements: Danfoss – SIL 2 proportional control valve - Distributor for outriggers: Bosch Rexroth – electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: novo, Laser power: 2Working area: 1500 x 3000 mmLoad capacity: 1250 kgX-axis travel: 1520 mmY-axis travel: 3030 mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmDimensions (LxWxH): 13000 x 4400 x 2350 mmWeight approx.: 12,500 kg The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a laser cutting machine with high efficiency and premium class standards. It can accommodate a laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machinery and plants. It is the ideal cutting machine for anyone looking to outsource cutting tasks. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, etc. The standard nesting software quickly prepares parts for cutting without operator intervention. It also features a flycut cutting function. Thanks to the dual exchange table, cutting can continue without downtime. All our machines are manufactured to European standards, and we hold a CE certificate. Our FLC-type machines are equipped with nozzle cleaning and a dual camera system. Bodpfx Aeruwapjfqolr Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head is equipped with autofocus, an active anti-collision function, and an auto-view feature that detects obstacles and moves automatically. Cutting heads are fitted with automatic cooling. All bridges used in our machines are a single piece, made from welded aluminum alloy sheets. This single-piece construction ensures bridge rigidity and prevents deformation during impacts, overlaps, or loads. Additionally, thanks to their structure being three times lighter than steel profile bridges, we can achieve high speeds and accelerations with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focusing head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzles and lens starter kit - Scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote inquiry - Automatic lubrication system - Dual camera SPECIFICATIONS: Working area: 1500 x 3000 mm Load capacity: 1200 kg XY travel: 1520 x 3030 mm Z-axis travel: 300 mm XYZ axis guide: 4-point ball cage XY drive system: Rack and pinion Z drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table changeover time: 10 sec Laser source: Raycus / Hans / JPT Output power of laser source: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air / Oxygen / Nitrogen Cooling type: Water chiller

Stanje: novo, Leto izdelave: 2025, nosilnost: 7.000 kg, dvižna višina: 34.700 mm, skupna dolžina: 10.060 mm, Steering modes: 2-wheel steering, 4-wheel steering, crab steering - Support type: Triple telescopic - Outrigger control: Individual or simultaneous outrigger commands - Engine emission standard: Stage V / Tier 4 - Rated engine power (kW): 211 Hp / 155 kW - Max. torque / Engine speed (min): 805 Nm @ 1500 rpm - Number of cylinders - Displacement: 4 - 4567 cm³ - Engine cooling system: Water-cooled - Number of batteries / Battery specification: 2 x 12 V - Battery capacity: 120 Ah - Battery starting current (EN): 850 A - Transmission type: Hydrostatic with CVT - Transmission: Speedshift - Max. travel speed: 40 km/h - Tractive force: 9300 daN - Parking brake: Automatic negative parking brake - Service brake: Oil-immersed multi-disc brakes on front and rear axles - Gradeability - laden / unladen: 29% / 38.70% - Pump type: Variable displacement pump - Hydraulic flow rate: 185 l/min - Hydraulic pressure: 350 bar Bodpsx Avutjfx Afqelr - Engine oil: 13 l - Hydraulic oil: 300 l - Fuel tank capacity: 320 l - Diesel exhaust aftertreatment (AdBlue®): 24 l - Operator cabin noise level (LpA): 68 dB - External noise level (LwA): 109 dB - Hand/arm vibration value: < 2.50 m/s² - Steering wheels (front / rear): 2 / 2 - Controls: 2 joysticks - Cabin safety certification: ROPS/FOPS Level 2 Cabin - Attachment recognition system (E-Reco): Standard

Stanje: novo, Tlak: 100 Bodpfx Afonzwhasqelr Moč motorja: 4 Dimenzije (DxŠxV): 1.600 x 850 x 2.500 mm Polnjenje z oljem: 29 Zmogljivost črpalke: 14,5 Hitrosti: naprej 8,5 mm/sek, nazaj 13,43 mm/sek Teža cca: 1.000 Delovno območje: 1000 x 350 Hod: 350 Standardna oprema: Visokokakovostna hidravlična stiskalnica, ki jo je mogoče upravljati ročno ali motorizirano. Valji se lahko premikajo bočno. CE-certifikat Regulacija tlaka 1 leto garancije Manometer Uporabniški priročnik (tiskan) Razmak med stojali: 1000 x 350 mm

Stanje: novo, Tlak: 80 Moč motorja: 3 Vgradna višina: 900 Hod: 300 Dimenzije (D x Š x V): 1.650 x 850 x 2.400 Približna teža: 850 Cilinder: 180 Hitrost: 7,54 Hitrost: 10,90 Standardna oprema: Kakovostna hidravlična preša, ki se lahko upravlja ročno ali motorizirano. Cilindri so lahko premaknjeni bočno. CE-certificirano Regulacija tlaka 1 leto garancije Manometer Uporabniški priročnik (tiskan) Blodpfeicidnex Afqsr Širina stojala: 900 x 300 mm Slika je simbolična.

Stanje: novo, Laser power: 3 kW Working area: 1500 x 3000 mm Loading capacity: 1200 kg X-axis travel: 1520 mm Y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeat accuracy: 0.03 mm Dimensions (LxWxH): 10,000 x 400 x 2120 mm The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. This laser cutting system offers high efficiency and complies with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for anyone looking to outsource their cutting operations. Wireless remote control enables easy blowing, cutting, pausing, calibration simulation, and more. The machine includes standard nesting software that quickly arranges parts for cutting with minimal operator input and features flycut capability. With a double shuttle table design, cutting can continue without downtime. All our machines are manufactured to European standards and come with CE certification. Our FLC series machines are equipped with nozzle cleaning and a dual camera system. Available cutting table sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus, active anti-collision, and an auto-view function for obstacle recognition and automated adjustment. Cutting heads are equipped with automatic cooling. All machine bridges are constructed as a single-piece welded aluminum alloy for maximum rigidity and lightweight design. This reduces the risk of deformation due to shocks or loads and allows for higher speeds and accelerations with lower motor power compared to steel bridges. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch CNC touch controller - Flycut functionality - Nozzle and lens starter kit - Part debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site operator training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS | VALUE Working area: 1500 x 3000 mm Blsdpfjruwawjx Afqer Loading capacity: 1200 kg XY axis travel: 1520 x 3030 mm Z axis travel: 300 mm XYZ axis guide: 4-point ball cage XY axis drive system: Rack & pinion Z axis drive system: Ball screw XY axis speed: 100 m/min Z axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 s Laser source: Raycus / Hans / JPT Laser source output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air / Oxygen / Nitrogen Cooling type: Water-cooled Machine weight: 12,000 kg

Stanje: novo, Laser power: 12 kWWorking area: 1500 x 3000 mmLoad capacity: 1200 kgX-axis travel: 1520 mmY-axis travel: 3030 mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmDimensions (LxWxH): 10,000 x 400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-efficient fiber laser cutting machine. It is a laser cutting machine offering high efficiency and features found in the premium segment. The machine can handle laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting solution for anyone looking to outsource cutting jobs. The wireless remote control allows for straightforward blowing, cutting, pausing, calibration simulation, and more. Standard nesting software enables rapid and operator-free preparation of parts for cutting. Additionally, the machine supports fly-cut functionality. Thanks to the dual shuttle table, cutting can continue without downtime. All of our machines are manufactured to European standards and come with CE certification. Our FLC models feature automatic nozzle cleaning and a dual-camera system. Available cutting areas are 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser heads are equipped with autofocus and active anti-collision features, as well as an auto-view system that detects obstacles and moves automatically. Cutting heads also have automatic cooling. Blodpsruwa Tefx Afqjr The bridges used in all our machines are made from a single-piece, welded aluminum alloy plate structure. Their one-piece construction guarantees rigidity and prevents deformation under impact, overlap, or load. Moreover, thanks to their design, which is three times lighter than steel bridge profiles, they achieve high speeds and accelerations with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19" CNC touchscreen control - Fly cutting - Nozzle and lens starter kit - Scrap drawers - Automatic pallet changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS ValueWorking area1500 x 3000 mmLoad capacity1200 kgXY-axis travel1520 x 3030 mmZ-axis travel300 mmXYZ axis guide4-point ball linear guidesXY axis drive systemRack and pinionZ axis drive systemBallscrewXY axis speed100 m/minZ axis speed30 m/minXY positioning accuracy0.05 mmXY repeatability0.03 mmPallet change time10 sLaser sourceRaycus / Hans / JPTLaser source output2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control systemFscutLaser cutting headRaytools / BOCI / WSXSupported gasesAir / Oxygen / NitrogenCooling typeWater coolingMachine weight12,000 kg

Stanje: novo, Laser power: 3 Loading capacity: 1250x Travel X: 2020 mm Travel Y: 4050 mm Travel Z: 350 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Table exchange time: approx. 10 sec Cooling system: Water chiller Weight approx.: 11,500 kg Dimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for the fabrication of agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment. It is the ideal cutting machine for those looking to outsource their cutting operations. Enables easy blowing, cutting, pausing, calibration simulation, etc., with the wireless remote control. Comes with standard nesting software, enabling fast, operator-independent part preparation for cutting. Features Flycut cutting function. With its double shuttle table, cutting can continue without waiting. All our machines are manufactured to European standards and are CE certified. Our FLC-type machines include nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and an active anti-collision function, plus an auto-view function that detects and automatically avoids obstacles. Cutting heads are equipped with automatic cooling. The bridges we use in all our machines consist of a welded construction made from aluminum alloy sheets and are one-piece. This ensures rigidity and prevents deformation under impacts, overlaps, or loads. Additionally, thanks to being three times lighter than steel profile bridges, higher speeds and accelerations can be achieved with less motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head Blsdpfx Aotuyf Hofqor - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzle and lens starter kit - Scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera SPECIFICATIONS VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z axis travel: 350 mm XYZ axis guide: 4-point ball cage XY axis drive system: Rack and pinion Z axis drive system: Ball screw XY axis speed: 100 m/min Z axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table exchange time: 10 sec Laser source: Raycus / Hans / JPT Laser power output: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air/Oxygen/N...

Stanje: novo, Pressure: 150 Motor: 15 Installation height: 500 mm Max. stroke length: 400 mm Table size: 900 x 600 mm Ram surface: 900 x 600 mm Table height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil filling: 400 L Hydraulic C-frame press Type: C-frame, hydraulic Capacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control system Blodpfx Afswzzzfeqjr Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor Hydraulic system Main cylinder: Ø 270 mm Auxiliary cylinders: 2 units, Ø 70 x 40 mm Auxiliary guides: 4 units, Ø 50 mm Motor: 15 kW / 22 HP (IE3) Pump: 45 ccm, 65 L/min – REXROTH Tank capacity: 500 L Oil volume: 400 L Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: available Air cooler for oil tank Adjustable speeds (via PLC) Forward: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical data Installation height: 500 mm (distance between ram & table plate) Stroke length: 400 mm Installation depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table plate) Platen dimensions Table plate: 900 x 600 x 120 mm (with T-slots, design as per customer request) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic accessories REXROTH hydraulic block & valves Prefill valve Hydraulic & mechanical ram locking (top dead center position) Pressure & speed adjustable via PLC Side safety doors (slidable to rear) Control & electronics Main control cabinet PLC control: SIEMENS S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand operation (mobile) Light sensors: SICK 700 + 130 mm Stroke measurement system: linear scale (500 mm) Screen: 9" Siemens touchscreen (storage for up to 500 tool sets) Remote maintenance: Secomea module Work area lighting (double) 8 free I/Os for external integration (e.g., robot, coil system) General specifications Voltage: 400 V / 50 Hz Standards: Conforms to Machinery Directive EN 693 Control: Dual-channel safety Valves: Hydraulic proportional valves Documentation: Operating manual & parts list (German), incl. maintenance plan Warranty: 12 months Paint: Main body RAL 7035 – Light grey Dimensions & weight Size (WxDxH): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Total weight: approx. 8,000 kg