Nty nakup rabljenega (11.245)

Stanje: skoraj kot novo (rabljeno), Naprodaj je rabljena formatna krožna žaga Felder K700 s širino reza 800 mm. Stroj je bil pri nas uporabljen le za kratek čas v demonstracijske namene. Zato ga označujemo kot skoraj novega, s polno garancijo/jamstvom. Tehnični podatki: - Krožna žaga z nagibom 90-45° - Formatna pomična miza 1300 mm - Utorni prislon 1100 mm - Širina reza 800 mm - Motor 4 kW (5,5 KM), 400 V - Št. stroja 425.04.050.25 Stroj se nahaja v A-8561 Söding in si ga je mogoče kadarkoli ogledati v naših odpiralnih urah. Vmesna prodaja pridržana! Sorodni pojmi: žaga, krožna žaga, formatna krožna žaga, format Bedpfoxzd Aiex Afqedk Referenca: R-N1194

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33003000252, lastna masa: 5.400 kg, največja dovoljena obremenitev: 18.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235 / 75 R 17,5", največja hitrost: 40 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2022, Oprema: osrednja vrtljiva plošča, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race ring Rear supports, foldable 2 wheel chocks with holders Full-width rear mudflap 1 plastic toolbox with removable shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock (padlock not included) Prepared for extension to 3,000 mm width (holes in the outer frame, not in the rear beavertail) Lashing points low loader 1 pair of tie-down recesses in the front longitudinal beams at the cranked section, each rated for 10 tonnes 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10 tonnes - 1 x at the front crank - 5 x in the low-bed section - 1 x in the rear beavertail 12 pairs of lashing holes in the outer frame, each rated for 5 tonnes (for attaching lashing straps) - 5 x at the cranked section, 6 x in the low-bed, 1 x in the rear beavertail Bdsdex A Amcepfx Afqjk Drawbar arrangement for turntable trailer Drawbar with tested 40 mm towing eye Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker balance) Wheels and Tyres 235 / 75 R 17.5" as per manufacturer's choice Steel twin wheels, factory silver Braking System 2-line air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle, connection lines extended by approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h approval Electrics 12 Volt, multi-chamber lights, without amber LED side lights, with side reflectors 2 white front position lights 2 white/red lane marker lights at rear 1 x 7-pin 12 Volt plug at the front with connecting cable, extended by approx. 60 cm 1 LED beacon with bracket, switched via parking lights (light removable) Floor Front crank section with steel/chequer plate flooring Stowage box recessed in the approach slope to the crank Then 70 mm softwood flooring, wheel arch area with steel/chequer plate covering Rear beavertail with 70 mm softwood floor Low-bed loading area incl. rear beavertail: 5900 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber overlay Spring-assisted Operating Instructions Axle loads exceeding 10,000 kg require a special permit, only for indivisible loads! The specified gross weight is technically feasible; depending on the type of cargo, the gross weight may not be achievable within permitted axle, support, and kingpin loads. (Poor driving and tracking characteristics may result from incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and report for max. 60 km/h approval, towing vehicle LoF (Switzerland max. 40 km/h possible) Prepared for two-line number plate holder Without contour marking / reflective tape to ECE R 048 Paint/Coating Frame: Hot-dip galvanised including passivation, "15 years anti-corrosion warranty" Drawbar: Galvanised or black finish, at manufacturer’s discretion Access ramps: Hot-dip galvanised

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.821 km, moč: 110 kW (149,56 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 3.500 kg, prva registracija: 01/2023, naslednji pregled (TÜV): 03/2027, emisijski razred: Euro 6, barva: bela, število sedežev: 3, število prejšnjih lastnikov: 1, Leto izdelave: 2023, Oprema: ABS, airbag, centralno zaklepanje, dodatne luči, drsna vrata, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, hladilna enota, klimatska naprava, navigacijski sistem, računalnik na krovu, servovolan, sistem za imobilizacijo, tempomat, Thermo King V-200 Max Drive/Standby Refrigeration Interior Equipment Parking Assistance (Front, Rear, Camera, Self-steering Systems) Climate Control (Automatic Climate Control) Navigation System Power Steering Cruise Control Partition Wall Central Locking System Exterior Features Right-hand Sliding Door Extras Full Service History Safety & Environment ABS ESP Particulate Filter Comfort Automatic Climate Control Electric Windows Cruise Control Central Locking System Adjustable Steering Column Heated Electric Mirrors Heat-Insulating Glass Rear View Camera Hill-Start Assist TEMPMATIC Air Conditioning Safety Airbag ESP (Electronic Stability Program) Alarm System Electronic Immobilizer Outside Temperature Display Daytime Running Lights Emergency Call System Crosswind Assist Exterior Self-steering Parking Assistant Vehicle Height: H2 Vehicle Length: L3 Interior Fabric Upholstery Interior Color: Black Center Armrest 3 Seats Armrest(s) Media MBUX Navigation Radio Radio with MP3 Option Bluetooth Connectivity Touchscreen MBUX Multimedia System with 7-inch Touchscreen 3 Years Free Map Updates Pre-installation for Live Traffic Information Transmission Manual Transmission, 6-speed Technology ABS Traction Control Power Steering Voice Control Emission Standard Euro 6d Multifunction Steering Wheel Particulate Filter Green Environmental Sticker Engine Start-Stop System General Full Service History Warranty Non-Smoking Vehicle Other Registered as Truck Mercedes-Benz "Junge Sterne" Certified Transporter New Inspection 270° Rear Doors Fresh Food Service Package Double Passenger Seat Stabilizers Reinforced Shock Absorbers Partition Wall Financing Available Right-hand Sliding Door Wheel Formula 4x2 Long Wheelbase CO2 Efficiency Class (Weighted): G AdBlue Tank Crosswind Assist Further Information Breakdown Management Overhead Storage Shelf High Roof Bjdpfxexz Dvij Afqodk Rear Doors, Twin-wing, Opening to Sidewall Front Axle with Increased Load Capacity N1 Registration Panel Van

Stanje: rabljeno, prevoženi kilometri: 178.771 km, moč: 103 kW (140,04 KM), vrsta goriva: dizel, prva registracija: 11/2018, emisijski razred: Euro 6, barva: bela, Leto izdelave: 2018, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), klimatska naprava, nadzor oprijema, računalnik na krovu, registracija tovornjaka, sistem za imobilizacijo, * Na naši spletni strani najdete še 1500 vozil, možen je leasing in financiranje tudi brez pologa! *Naše cene so cene pri plačilu z gotovino, torej se dodatna dela kot so npr. naknadna vgradnja vlečne kljuke, drugi komplet pnevmatik, servis, garancija, paketi brezskrbnosti ipd. zaračunavajo posebej. *Kljub največji skrbnosti napak v oglasih ni mogoče izključiti, zato so brez garancije! Pridržujemo si pravico do napak pri vnosu, vmesne prodaje in zmot. Podatki o opremi in porabi temeljijo na poizvedbi podatkov VIN prek sistema DAT SilverDAT. Podatki VIN ne postanejo del prodajne pogodbe. *Naša nova vozila: Zaradi različnih zahtev proizvajalcev se lahko zgodi, da imajo ta vozila že enodnevno ali kratkotrajno registracijo ali jo bodo pred prodajo še pridobila.* ... Spremembe, vmesna prodaja in napake pridržane. Bedpfxev U Iv Ds Afqodk

Stanje: rabljeno, No. 3197 Vertical Band Saw Bögli 1600 Used machine, regularly serviced and modernized Sawing operations ceased in summer 2024 For logs up to 1500 mm diameter Carriage approx. 7650 mm long, 5 support arms Carriage approx. 3000 mm wide Maximum length cut: 8000 mm Average cutting capacity: 55–70 solid cubic meters per 8.5 hours 2 core separation saws Drive motor: 55 kW, 1460 rpm Wheel diameter: 1600 mm Blade width max. 205 mm, length 10560 mm, thickness 1.65 mm Hydraulic unit renewed in 2007 Carriage rollers and shafts renewed in 2011 Operated by 3 persons Operator cabin with remote control and video monitoring Required space approx. 25000 x 10000 mm (L x W) Bdedjvvm Iujpfx Afqsk Sales on behalf of customer, ex site near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading and transportation can be offered by us as an option Subject to errors in description and price To avoid potential misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition, year of construction and scope of delivery as per manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty for used machines; sale subject to: "purchased as seen" Pictures and videos are examples and do not reflect the actual scope of delivery Payment terms: prices plus statutory VAT, payment before pickup or shipping Delivery terms: ex location

Stanje: rabljeno, Kompletna linia do rozlewu wody (PET 1,5L) – Przegląd Ta używana linia do butelkowania PET została skonfigurowana do wody niegazowanej w butelkach 1,5-litrowych i osiąga wydajność w zakresie około 12 000–16 000 butelek na godzinę. Zaprojektowana z myślą o przemysłowym pakowaniu oraz produkcji napojów, wykorzystuje sprawdzone maszyny używane renomowanych producentów, oferując niezawodne i wydajne rozwiązanie dla linii rozlewniczej z drugiej ręki. Konfiguracja obejmuje podawanie preform, rozdmuchiwanie, nalewanie, zakręcanie, etykietowanie, owijanie termokurczliwe, aplikację uchwytów, paletyzację oraz transportery, zapewniając kompleksowy, zautomatyzowany przebieg procesu pakowania. Kluczowe elementy to podajnik i elewator do preform Sameto Technifil, rozdmuchiwarka Siedel SBO10, nalewarka Alsim Asmojet, podajnik zakrętek Arol, etykieciarka Kronos Contiroll, owijarka termokurczliwa ACMI Fenix 165 oraz aplikator uchwytów Smipack HA50. Ten wszechstronny zestaw maszyn pakujących idealnie sprawdzi się w zakładach produkujących napoje, które chcą rozbudować lub wymienić istniejącą używaną linię na sprawdzony park maszynowy o stabilnej wydajności. Dane techniczne i parametry wydajności • Wydajność produkcyjna: 12 000–16 000 butelek/godz. • Główny produkt: woda • Typ opakowania: PET • Format butelki: 1,5L • Podajnik preform: Sameto Technifil EBH 2050 (2010) • Rozdmuchiwarka: Siedel SBO10 (2010) • Nalewarka: Alsim Asmojet (1999) • Podajnik zakrętek: Arol • Etykieciarka: Kronos Contiroll (2004) • Owijarka termokurczliwa: ACMI Fenix 165 (2019) • Aplikator uchwytów: Smipack HA50 (2002) • Dodatkowe jednostki: mieszalnik, paletyzacja, systemy transportowe Zaawansowana automatyka i systemy sterowania Architektura linii umożliwia zsynchronizowaną pracę rozdmuchiwarki, nalewarki, etykieciarki i urządzeń końca linii poprzez standardowe przemysłowe interfejsy sterowania. Każda maszyna wyposażona jest zazwyczaj w panel operatorski HMI, umożliwiający zmianę formatów, wybór receptur oraz monitorowanie statusu w czasie rzeczywistym. Zintegrowane blokady bezpieczeństwa, osłony i wyłączniki awaryjne pozwalają na wspólne zarządzanie uruchamianiem i zatrzymywaniem transporterów i stanowisk technologicznych, utrzymując ciągłość produkcji i minimalizując przestoje. Bjdjxywglspfx Afqodk Możliwości integracji linii produkcyjnej Pełna linia przeznaczona jest do pracy liniowej z ciągłym przepływem butelek od podania preform po paletyzację. Zintegrowane transportery zapewniają płynne przekazywanie butelek pomiędzy maszynami, gwarantując stabilną wydajność w określonym zakresie. Konfiguracja dedykowana jest rozlewowi wody do butelek PET 1,5L i spełnia wymogi przemysłowego pakowania napojów. Połączenie z systemem podawania preform oraz logistyką końcową wspierane jest przez standardowe mechaniczne i elektroniczne interfejsy komunikacyjne. Stan techniczny maszyn i historia eksploatacji Linia oferowana jest jako komplet używanych maszyn i obejmuje urządzenia wyprodukowane w latach 1999–2019. Sprzedawana w stanie roboczym, jest odpowiednia do ponownego uruchomienia w produkcji napojów.

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Stratos FU 230 woodturning lathe with a center distance of 680 mm and a 2 HP motor. This demonstration machine is in its original condition, so you receive the full warranty. Technical Data - Center height: 230 mm - Swing over bed: 455 mm (up to 800 mm with optional outboard turning attachment!) - Center distance: approx. 680 mm (extendable!) Bdjdpotppr Usfx Afqsk - Spindle thread: M33 x 3.5 (hardened) with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (230 V connection) - Weight: 178 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address in the contact form so we can process your inquiry professionally. Thank you, your NEUREITER Team Related terms: Woodturning machine, lathe, engine lathe, wood lathe, turning, turning tools, woodturning, machining, machine Reference: R-A0117

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump Bedpfex Avy Asx Afqsdk - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: rabljeno, prevoženi kilometri: 159.267 km, moč: 110 kW (149,56 KM), prva registracija: 01/2019, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 1 os, naslednji pregled (TÜV): 03/2026, gorivo: dizel, zavore: drugo, voznikova kabina: drugo, vrsta prenosa: drugo, emisijski razred: Euro 6, vzmetenje: drugo, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, meglenke, nadzor oprijema, parkirni grelec, sistem za imobilizacijo, spojka prikolice, * Na naši spletni strani najdete še 1500 vozil, možen je leasing in financiranje tudi brez pologa! *Naše cene so cene pri plačilu z gotovino, torej se dodatna dela kot so npr. naknadna vgradnja vlečne kljuke, drugi komplet pnevmatik, servis, garancija, paketi brezskrbnosti ipd. zaračunavajo posebej. *Kljub največji skrbnosti napak v oglasih ni mogoče izključiti, zato so brez garancije! Pridržujemo si pravico do napak pri vnosu, vmesne prodaje in zmot. Podatki o opremi in porabi temeljijo na poizvedbi podatkov VIN prek sistema DAT SilverDAT. Podatki VIN ne postanejo del prodajne pogodbe. *Naša nova vozila: Zaradi različnih zahtev proizvajalcev se lahko zgodi, da imajo ta vozila že enodnevno ali kratkotrajno registracijo ali jo bodo pred prodajo še pridobila.* ... Spremembe, vmesna prodaja in napake pridržane. Bdedpfx Ajx Am Drefqjk

Stanje: rabljeno, Leto izdelave: 2004, Gebrauchte Keber PALPACK DS Palettierer Bdsdpsxywafofx Afqjk Der Keber PALPACK DS ist ein konventioneller, automatischer Palettierer zur End-of-Line-Palettierung von Kartons in der Getränkeproduktion und industriellen Verpackung. Diese gebrauchte Lösung rationalisiert die letzte Phase einer gebrauchten Abfülllinie, indem verschlossene Kartons zu stabilen Lagen gruppiert und gemäß vorgegebenem Stapelmuster auf Paletten platziert werden. Entwickelt für zuverlässigen Durchsatz und schonendes Handling, unterstützt sie Produzenten bei der Vorbereitung von Ladungen zum Wickeln, Einlagern und Transportieren mit gleichbleibender Qualität und minimalem Bedienereinsatz. Hergestellt von Keber, lässt sich der PALPACK DS nahtlos in vollumfängliche Verpackungslinien integrieren, die Glasflaschen in Kartons verarbeiten. Typische Anwendungen umfassen Flaschengetränke im üblichen Einzelhandelsformat wie 0,75L, 1,0L und 1,5L. Die praxisorientierte Bauweise und robuste Konstruktion gewährleisten einen Dauerbetrieb unter anspruchsvollen Bedingungen, wo Laufzeiten und Palettenstabilität entscheidend sind. Ob zur Modernisierung einer bestehenden gebrauchten Abfülllinie oder zur Kapazitätserweiterung – dieses Palettiersystem ermöglicht eine zuverlässige Performance auf kompaktem, bedienerfreundlichem Raum. Technische Daten & Leistungsmerkmale Hersteller: Keber Modell: PALPACK DS Maschinentyp: Konventioneller, automatischer Palettierer für Kartons Baujahr: 2004 Gebindehandling: Für in Kartons verpackte Glasflaschen ausgelegt Flaschenformate: Geeignet für 0,75L, 1,0L, 1,5L (kartoniert) Palettenformat: EUR-EPAL Palette, 800×1200 mm Erweiterte Automatisierungs- & Steuerungstechnik Der PALPACK DS ermöglicht automatisierte Lagenbildung und einen ordentlichen Palettenaufbau für konstante, reproduzierbare Ergebnisse. Seine End-of-Line-Steuerung koordiniert Kartonzufuhr, Lagenpositionierung und Palettenwechsel, sodass Bediener stabile Stapel für die nachgelagerte Stretchwickelung sicherstellen können. Die Konstruktion bietet freien Bedienzugang, Sicherheitsverriegelungen und einfachste Anpassungen für effiziente Produktdurchläufe und Formatwechsel. Integrierbarkeit in Produktionslinien Dieser Palettierer wird nach dem Heißleim-Kartonverschließen und vor dem Palettenwickler positioniert und ermöglicht einen durchgängigen, automatischen Fluss vom verpackten Karton bis zur fertigen Palette. Er ist mit Standardfördertechnik kompatibel und lässt sich problemlos in bestehende, gebrauchte Abfülllinien für Glasflaschenkartons integrieren. Besonders geeignet für die Getränkeindustrie, in der mehrere Flaschengrößen in Kartons verpackt und für die Distribution vorbereitet werden. Typische Anwendungsbeispiele: - Vorstufe: Heißleim-Kartonverschließer (z. B. TE-CO 607-98) - Nachstufe: Automatischer Palettenwickler (z. B. Imballaggi Service Group EASY WRAP 2000 A) Maschinenzustand & Wartungshistorie Das Gerät wird als betriebsbereit im Kontext einer Gesamtlinie geführt. Es handelt sich um einen funktionsfähigen, gebrauchten Palettierer, der sich nahtlos in industrielle Verpackungs- sowie Getränkeproduktionsprozesse integrieren lässt und sofort einsatzfähig ist.

Stanje: kot nova (razstavni stroj), SHOWROOM MACHINE For sale is an as-new Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The showroom machine is in its original condition, so you receive the full warranty. Technical Specifications - Center height: 280 mm - Swing over bed: 550 mm (with optional bed extension/outboard turning attachment up to 1,000 mm) - Distance between centers: approx. 780 mm (extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock: Morse taper MK2 - Frequency converter (3 belt stages): - Stage 1: 60 – 1,200 rpm - Stage 2: 100 – 2,200 rpm - Stage 3: 150 – 3,700 rpm - Tailstock quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping: Austria: €125.00 incl. VAT Germany: €150.00 incl. VAT South Tyrol: €180.00 incl. VAT Bjdpfetpplnjx Afqedk If you are interested in this machine, please provide your full address details in the contact form so we can process your inquiry professionally. Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, bench lathe, turning bench, turning, turning tools, woodturning, machining, machine Reference: R-A0117

Stanje: novo, Leto izdelave: 2023, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, dolžina vilic: 1.200 mm, skupna dolžina: 7.760 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. Bedpsx Avyijfx Afqsdk - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: rabljeno, prevoženi kilometri: 49.692 km, moč: 100 kW (135,96 KM), vrsta goriva: dizel, barva: bela, prva registracija: 09/2020, naslednji pregled (TÜV): 12/2026, emisijski razred: Euro 6, Leto izdelave: 2020, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, nadzor oprijema, navigacijski sistem, računalnik na krovu, sistem za imobilizacijo, * Na naši spletni strani najdete še 1500 vozil, možen je leasing in financiranje tudi brez pologa! *Naše cene so cene pri plačilu z gotovino, torej se dodatna dela kot so npr. naknadna vgradnja vlečne kljuke, drugi komplet pnevmatik, servis, garancija, paketi brezskrbnosti ipd. zaračunavajo posebej. *Kljub največji skrbnosti napak v oglasih ni mogoče izključiti, zato so brez garancije! Pridržujemo si pravico do napak pri vnosu, vmesne prodaje in zmot. Podatki o opremi in porabi temeljijo na poizvedbi podatkov VIN prek sistema DAT SilverDAT. Podatki VIN ne postanejo del prodajne pogodbe. *Naša nova vozila: Zaradi različnih zahtev proizvajalcev se lahko zgodi, da imajo ta vozila že enodnevno ali kratkotrajno registracijo ali jo bodo pred prodajo še pridobila.* ... Spremembe, vmesna prodaja in napake pridržane. Bdedpfxex Am Dxj Afqsk

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Stratos FU 230 LV (Long Version) woodturning lathe with a centre distance of approx. 1,000 mm (1 meter). This exhibition machine is in its original condition, so you benefit from the full warranty. Technical specifications: - Centre height: 230 mm - Swing over bed: 455 mm (up to 800 mm with the optional outboard turning attachment!) - Centre distance: approx. 955 mm on SPECIAL MODEL STRATOS FU-230 LV (further extendable with optional bed extension!) - Spindle thread: M33 x 3.5 (hardened), with ASR (Euro) anti-rotation safety groove* - Headstock and tailstock Morse taper: MK2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (graduated scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight SPECIAL MODEL LV: 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarding: Austria: €105.00 incl. VAT Germany: €125.00 incl. VAT Bsdpfetpxw Aox Afqsdk South Tyrol: €150.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your enquiry professionally. Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, turning lathe, woodturning machine, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: novo, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h Bodpfx Afox Avycsqedk - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new Drechselmeister TWISTER XL wood lathe, turning machine with a centre distance of 800 mm. The exhibition machine is in its original condition, so you receive the full warranty. Technical Data - Centre height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning attachment!) - Centre distance: approx. 800 mm (extendable!) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Tailstock quill travel: 150 mm (with scale) and trapezoidal thread spindle - Motor: 2 HP - Weight: approx. 290 kg The machine is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Freight dispatch: Austria: € 125.00 incl. VAT Germany: € 150.00 incl. VAT Bedpetpxx Ijfx Afqjdk South Tyrol: € 180.00 incl. VAT Related terms: wood turning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machine Reference: R-A0117

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, dolžina vilic: 1.200 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 Bodpfxjx Avx Se Afqodk - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: kot nova (razstavni stroj), DISPLAY MACHINE For sale is an as-new Drechselmeister MIDI PRO benchtop wood lathe with a center distance of 450 mm. The display machine is in its original condition, therefore you receive the full warranty. Technical Data - Center height: approx. 178 mm (turning diameter 355 mm over the bed) - Center distance: approx. 450 mm (expandable!) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread: M33 x 3.5 (MT2 taper) with ASR (Euro) anti-release slot* - Tailstock with interchangeable barrel MT2, 100 mm - Motor: 0.7 kW / 1 HP (230 V) - Forward/reverse operation - Four-prong drive center and live center MT2 - Tool rest 250 mm (shank 25.4 mm) - Faceplate 95 mm - Machine weight assembled: approx. 67 kg - Weight of individual components (for easy transport, e.g., to markets): - Headstock 27 kg - Bed 26.4 kg - Tailstock 7.5 kg - Complete tool rest 6.2 kg Bdedotpn Tlepfx Afqek The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight: Austria: € 60.00 incl. VAT Germany: € 70.00 incl. VAT South Tyrol: € 95.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER team Related terms: woodturning lathe, metal lathe, lathe, wood lathe, woodturning, turning tools, woodturning, turning, machine Reference: R-A0117

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated Bdsdpsx Avxxjfx Afqsk - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 woodturning lathe with a centre distance of 560 mm. The exhibition machine is in original condition, so you receive the full warranty. Bdsdstphy Aepfx Afqek Technical Data - Centre height: 180 mm - Swing over bed: 358 mm (even higher with optional outboard turning device – depending on the workpiece!) - Centre distance: approx. 560 mm (extendable!) - Spindle thread: M33 x 3.5 with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MK2 - Speed range (2 belt stages): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal leadscrew - Motor: 1.1 kW / 1.5 HP (230 V) - Overall length: 1,345 mm - Weight, stand version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight carrier: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your full address details in the contact form so we can process your enquiry professionally. Thank you, your NEUREITER Team Related keywords: woodturning lathe, lathe, turning machine, woodturning, turning, woodturning tools, lathes, machine Reference: R-A0117

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 34.900 mm, skupna dolžina: 9.040 mm, - Rotating Telescopic Handler RTH 6.35 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 34.90 m - Continuous 360-degree rotation - Engine: Volvo TAD 583 VE, Stage V - Rated power: 175 kW (238 HP) at 2,300 rpm - Maximum torque: 975 Nm at 1,380 rpm - Displacement: 5.13 l - Number of cylinders: 4 in-line - Engine configuration: diesel engine with direct injection and turbocharging - Cooling system: water-cooled intercooler - Drive type: hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Delivery volume: electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox gearbox with 2 speed ranges forward and reverse - Axles and brakes: axle type with planetary final drives - Rear axle: oscillating steering axle with hydraulic lock - Front axle: oscillating steering axle with automatic leveling +/- 8 degrees - Service brake: oil-immersed disc brakes on each axle, hydraulically actuated - Parking brake: negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Maximum travel speed: 40 km/h - Maximum tractive force at hook: 152 kN - Climbing ability: 65% Bdsdpfx Afjx Avwzeqek - Turning radius (with forks): 7,000 mm - Diesel fuel: 270 l - AdBlue: 40 l - Hydraulic oil: 220 l - Engine oil: 16 l - Coolant: 40 l - Maximum operating pressure: 350 bar - Hydraulic system type: load sensing - Main pump: Danfoss / Rexroth variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional valve SIL 2 - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: two Danfoss 2-axis joysticks with dead man’s device - Control system: CAN bus technology

Stanje: kot nova (razstavni stroj), EXHIBITION MACHINE For sale is an almost new Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. This exhibition machine is in its original condition and comes with the full warranty. Technical specifications - Center height: 200 mm - Swing over bed: 395 mm (up to 700 mm with optional outboard turning device) - Center distance: approx. 715 mm (optionally extendable) - Spindle mount: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill stroke: 100 mm (with trapezoidal thread), prepared for ER-25 drill adapter - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch - Weight (floor-standing version): 166 kg The machine is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €95.00 incl. VAT Bodjtpnawspfx Afqodk Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning lathe, woodturning lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 34.900 mm, skupna dolžina: 9.290 mm, - Rotating Telescopic Handler RTH 6.35 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 34.90 m - Continuous 360-degree rotation - Engine: Volvo TAD 583 VE, Stage V - Rated power: 175 kW (238 HP) at 2,300 rpm - Maximum torque: 975 Nm at 1,380 rpm - Displacement: 5.13 l - Number of cylinders: 4 in-line - Engine configuration: diesel engine with direct injection and turbocharging - Cooling system: water-cooled intercooler - Drive type: hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Delivery volume: electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox gearbox with 2 speed ranges forward and reverse Bdedpfx Asx Avwhjfqok - Axles and brakes: axle type with planetary final drives - Rear axle: oscillating steering axle with hydraulic lock - Front axle: oscillating steering axle with automatic leveling +/- 8 degrees - Service brake: oil-immersed disc brakes on each axle, hydraulically actuated - Parking brake: negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Maximum travel speed: 40 km/h - Maximum tractive force at hook: 152 kN - Climbing ability: 65% - Turning radius (with forks): 7,000 mm - Diesel fuel: 270 l - AdBlue: 40 l - Hydraulic oil: 220 l - Engine oil: 16 l - Coolant: 40 l - Maximum operating pressure: 350 bar - Hydraulic system type: load sensing - Main pump: Danfoss / Rexroth variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional valve SIL 2 - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: two Danfoss 2-axis joysticks with dead man’s device - Control system: CAN bus technology

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE We are selling our as-new Drechselmeister MIDI 1 woodturning lathe with a centre distance of 400 mm. The ex-demonstration machine is in its original condition, therefore you receive the full warranty. Bedpfx Afotpn Nlsqedk Technical Data - Centre height approx. 178 mm / Swing over bed 355 mm - Centre distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / Infinitely variable speeds: 80 – 800 / 170 – 1,700 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (Morse taper MK2) with ASR (Euro) safety groove* - Tailstock with MK2 quill (50 mm travel with graduated scale!) - Motor 0.7 kW / 1 hp (230 V) with frequency inverter - Weight approx. 43 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping rates: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your enquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, wood lathe, turning lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: kot nova (razstavni stroj), DISPLAY MACHINE For sale is an as-new Drechselmeister MIDI 2 PLUS woodturning lathe with a maximum turning diameter of 355 mm. The display machine is in original condition and therefore comes with the full warranty. Bedpfxstpn Srs Afqodk Technical Specifications - Centre height approx. 178 mm / turning diameter 355 mm - Centre distance approx. 400 mm (extendable with optionally available bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (Morse taper MK2) with ASR (Euro) anti-rotation safety groove* - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread and scale! - (Optional: Interchangeable quill with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so we can process your enquiry professionally. Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning machine, woodturning lathe, woodturning tools, woodturning, turning, machine Reference: R-A0117