Navpično Meso Žaga nakup rabljenega (4.720)

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Bledpfx Aeupw R Ajiqen Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: novo, Cutting capacity at 90 degrees (round): 125 mm Cutting capacity at 90 degrees (square): 125 mm Cutting capacity at 90 degrees (rectangular): 127 x 125 mm Blsdpfxoupw R No Aiqsn Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Dimensions (L x W x H): 720 x 380 x 450 mm Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. With the metal band saw you will work not only precisely, but also quickly: the blade speed can be variably adjusted between 38 and 80 meters per minute. Weighing only 25 kilograms, the saw is mobile and can be used on site.

Stanje: novo, Cutting diameter: 355 mm Saw blade dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20 - 80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Bledemhm Aqopfx Aiqjn Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Supply voltage: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Semi-automatic Mitre Bandsaw - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vise with quick-release device - Band tension control via manometer - Electric coolant system

Stanje: rabljeno, Roller diameter: 500 mm Throat depth: 490 mm Blsdpjqux Syofx Aiqon Workpiece height: 220 mm Table size: 600 x 600 mm Saw band length: 3350 mm Speed: 12 - 1900 m/min Total power requirement: kW Machine weight approx.: 0.4 t Space requirement approx.: 1.2 x 0.8 x 1.95 m Bandsaw with: - tiltable/swiveling table - foot switch - machine lamp - IDEAL welding unit

Stanje: novo, Premer reza 250 mm Dolžina tračnega lista 2950x27x0,9 mm Hitrost tračnega lista 36/72 m/min Skupna priključna moč 1,8 kW Teža stroja pribl. 440 kg Absolutna posebna cena!! 7170,-EUR (Aktualna cena od 2024 je 9425,-EUR) Osnovna oprema: Vpenjalna čeljust s hitro nastavitvijo in nastavljivimi vodili Hidravlična naprava za napenjanje traku z indikatorjem napetosti Podnožje s snemljivo kadjo za hladilno tekočino Krtača za odstranjevanje ostružkov Nastavljeni precizni prisloni za reze pod: 0°, 45° in 60° levo ter 45° desno Obračevalna plošča za dvojne poševne reze Bsdpfx Aiefg E H Njqoln Električna naprava za dovod hladilne tekočine 48 V (Možna dodatna namestitev mikro-razpršilne enote)

Stanje: rabljeno, Leto izdelave: 1975, Wheel diameter 440 mm Throat depth 420 mm Workpiece height 200 mm Cutting speed 20 - 1550 m/min Table clamping surface 560 x 560 mm Saw blade length 3250 mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Blsdpfxjvu Hb Es Aiqjn Space requirement approx. 1.2 x 0.8 x 2.1 m Band saw equipped with: - Blade welding device - Grinding stone - Saw bands - Documentation

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, številka stroja/vozila: 3000314904, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5 h, moč: 2,4 kW (3,26 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja višina reza: 300 mm, največja širina rezanja: 320 mm, vrsta upravljanja: Krmiljeno s PLC krmilnikom, premer valja: 300 mm, vrtilni razpon: 60 °, vrsta aktuacije: električni, največja hitrost vrtenja: 100 obr/min, vrtljajska hitrost (min.): 15 obr/min, skupna višina: 1.500 mm, skupna dolžina: 2.050 mm, skupna širina: 1.170 mm, skupna masa: 650 kg, višina mize: 800 mm, leto zadnje generalne obnove: 2026, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, PEGAS-GONDA 300x320 SHI-LR-CZ – Demonstracijska tračna žaga, leto izdelave 2025 Ponujamo v prodajo polavtomatsko tračno žago za kovine PEGAS-GONDA 300x320 SHI-LR-CZ, izdelano leta 2025. Stroj je na voljo neposredno pri proizvajalcu PEGAS-GONDA in je bil uporabljen kot demonstracijski stroj v naši razstavni sobi. To je posebna različica -CZ, ki ima v primerjavi s standardno različico bolj robustno zasnovo žagine roke. Žagina roka je izdelana iz profilov zaprte oblike, ležaji žaginega kolesa pa so nameščeni v ohišjih iz sive litine. Ta zasnova zagotavlja večjo togost in stabilnost žagne roke. Poleg tega je stroj opremljen z digitalnim prikazovalnikom, ki prikazuje trenutni kot rezanja neposredno na nadzorni plošči, kar olajša in pospeši natančno nastavitev kota. Standardni model 300x320 SHI-LR, brez digitalnega prikazovalnika kota rezanja, je v našem uradnem ceniku naveden po ceni 12.020 EUR. Izkoristite to edinstveno ponudbo razstavne sobe in pridobite demonstracijski stroj po ceni 6.100 EUR, ki je na voljo tudi v robustnejši različici -CZ. Glavne značilnosti: polavtomatska hidravlična tračna žaga za kovine robustna zasnova SHI-LR-CZ leto izdelave: 2025 demonstracijski stroj iz razstavne sobe proizvajalca hidravlično vpenjanje materiala hidravlično nadzorovano gibanje žagne roke brezstopenjsko nastavljiva hitrost rezila prek frekvenčnega pretvornika brezstopenjsko nastavljivo poševno rezanje od 0° do +60° v desno in od 0° do -45° v levo digitalni prikazovalnik kota rezanja litinska vrtljiva miza avtomatsko nastavljiv položaj zgornje žagne roke sistem za hlajenje avtomatska indikacija pravilne napetosti rezila Zmogljivosti rezanja Pri 0°: okrogel material: Ø 300 mm pravokoten profil: 320 × 290 mm Pri +45°: okrogel material: Ø 300 mm pravokoten profil: 300 × 280 mm Pri +60°: okrogel material: Ø 200 mm pravokoten profil: 190 × 200 mm Pri -45°: okrogel material: Ø 270 mm pravokoten profil: 270 × 200 mm Tehnični podatki: moč motorja žaginega rezila: 2,4 kW napajalna napetost: 3 × 400 V hitrost rezila: 20–100 m/min, brezstopenjsko nastavljiva dimenzije žaginega rezila: 3660 × 27 × 0,9 mm delovna višina: 800 mm dimenzije stroja: približno 2050 × 1170 × 1420–2040 mm masa stroja: približno 650 kg Bodpfx Aozy Ndisiqoln Polavtomatski delovni cikel Ko je material pozicioniran in se cikel začne, stroj hidravlično vpenja obdelovanec. Žagina roka se hitro premika proti materialu in nato samodejno preklopi na vnaprej nastavljeno hitrost rezanja. Po končanem rezanju se žagina roka samodejno vrne v vnaprej nastavljen zgornji položaj. Med posameznimi rezi operater potrebuje le, da ponovno pozicionira material. Stroj si lahko ogledate in preizkusite neposredno pri PEGAS-GONDA, proizvajalcu. Proizvajalec: PEGAS-GONDA Model: 300x320 SHI-LR-CZ Leto izdelave: 2025 Stanje: Demonstracijski stroj / razstavni stroj

Stanje: novo, Cutting capacity at 90°: round 172 mm Cutting capacity at 90°: square 170 mm Cutting capacity at 90°: rectangular 170 x 170 mm Saw blade dimensions: 2035 x 20 x 0.9 mm Dimensions (L x W x H): 430 x 960 x 520 mm Blade speed: 30 - 80 m/min Total power requirement: 1.5 kW Machine weight: approx. 38 kg SPECIAL OFFER PRICE!! Bodpfx Asfgyhzeiqjln Berg & Schmid - Portable Bandsaw PBS 171 ESC Powerful and particularly robust metal bandsaw with die-cast aluminium saw table and stepless cutting speed for mitre cuts up to 60°. Optional: Machine stand type 20508

Stanje: novo, Cutting diameter: 220 mm Blsdpjfgyh Nofx Aiqen Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Blade speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90 degrees: round 220 mm Cutting capacity at 90 degrees: square 210 x 210 mm Cutting capacity at 90 degrees: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 240 kg Space requirements: approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw designed for mitre cuts from 0° to 60° to the left. After the cut is completed, the machine stops automatically via a safety limit switch. The lowering speed is infinitely adjustable via a hydraulic system. Raising the saw arm after the cut can be set to any desired position; the saw arm will remain at the selected position. The Z241/R comes equipped with: - Hydraulic cylinder - Coolant pump - Eccentric vice - Machine base - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blodefgyh Tjpfx Aiqjn Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.42 t Double-miter metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support surface - Automatic coolant system

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth and ergonomic sawing Specially developed for cutting profiles, beams, and solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting with the K-tech 800H model, the machine is equipped as standard with an additional horizontal clamping vise. The interaction of the hydraulic saw frame lowering, material positioning, and the pusher system is controlled by CNC. Blsdpfxofgyifj Aiqen The machines come standard with the environmentally friendly 'B&S Clean Cut cutting system' with minimal quantity lubrication, saving on cleaning effort and conserving resources. CNC Control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feed and positioning unit, is fitted with 'double-opening clamping jaws' controlled hydraulically. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Bodpfxefgyigs Aiqjln Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirements approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H, with push system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeder, and positioning system is equipped with "double-sided opening gripper jaws" that are hydraulically actuated. This ensures safe gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is built as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting range at 90 degrees: round 680 mm Bledpfx Aofg E Hmeiqjn Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Bedpfx Aofg E Hzoiqoln Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: novo, Cutting diameter 250 mm Saw blade length 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed 36/72 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t MEP Sawing Machine: Saw frame, vise unit, and base made of high-strength cast iron Precision angle scale on the cast iron structure Electrical system (with fully identifiable wiring and 24 V low voltage system) Switch handle IP 55 for manual cycles (if applicable) Rotating chip removal brush for the saw band Vise unit with quick approach Precise stops with setting for miter cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, user manuals, and spare parts order instructions Bledpfx Asfg E H Isiqjn in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual mode and cutting with automatic head feed by gravity. CCS (Cut Control System) with (A: selector switch for manual and automatic cutting – B: adjustment of the cutting speed – C: hydraulic brake with reservoir – D: end stop for stopping the band); also available as an option for already produced machines. Quick-adjust vise Hydraulic indicator for band tension Electric coolant pump for cooling and lubricating the saw band and easily accessible coolant tray above the base frame On versions with pneumatic vise (MA), opening and closing of the vise are controlled by a manual valve (optionally foot-operated).

Stanje: novo, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangular 610 x 450 mm Saw blade length 5320 x 34 x 1.1 mm Blade speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start detection) Automatic feed unit via ball screw incremental feed with automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure switch-off in idle mode Mechanical swarf removal brush, feed vice opens on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple cutting jobs with various cutting lengths and quantities. Automatic feed unit, 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Selection of 3 different material feed rates Visualization of the entire workflow with simple data entry Bjdpofu Nbbofx Aiqoln

Stanje: novo, Cutting capacity at 90°: round 105 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: rectangular 100 x 105 mm Saw band dimensions: 1335 x 13 x 0.65 mm Dimensions (L x W x H): 650 x 310 x 300 mm Bljdpfxsfv Aq Ro Aiqsn Band speed: 30 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Special Offer Price!! Berg & Schmid - Portable Band Saw PBS 90 ESC High-performance and particularly robust metal band saw with aluminum die-cast saw table and stepless cutting speed for mitre cuts up to 60° Shipping cost share: 25 EUR Images show identical PBS 110 model.

Stanje: novo, Premer reza 185 mm Dolžina tračnega lista 2.085 x 20 x 0,90 mm Višina mize 915 mm Hitrost traku 35/70 m/min Območje reza pri 90 stopinjah: okroglo 185 mm Območje reza pri 90 stopinjah: kvadratno 150 mm Območje reza pri 90 stopinjah: ploščato 220 x 150 mm Priključna napetost 400 V Skupna potrebna moč 0,8 kW Teža stroja pribl. 195 kg Potrebni prostor pribl. 550 x 1.280 x 1.740 mm Kovinska tračna žaga z brezstopenjsko elektronsko regulacijo hitrosti in avtomatskim spuščanjem. •Izbirno stikalo za hidravlično vodeno ali ročno spuščanje žagine roke •Zagodna roka vrtljiva do 60° desno •Hitrovpenjalni primež •Vodenje traku z 8 krogličnimi ležaji Bledohpktrepfx Aiqen •Hidravlično napenjanje žaginega traku z indikatorjem napetosti in izklopom ob pretrganju traku •Vključno z napravo za hlajenje •Vključno z omarico za stroj

Stanje: novo, Cutting diameter: 240 mm Bodpfxsd Iip Se Aiqsln Bandsaw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Miter cut left 60° • Quick-release vice with fast-clamping mechanism • Quick-release lever for easy handling • Frame and gearbox made from a single casting, ensuring very quiet and low-vibration operation • Electronic monitoring of blade tension and blade breakage, with bandsaw blade cover • Carbide bandsaw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: hydraulic cylinder, feed rate control, spring package, limit switch Automatic saw frame lowering via hydraulic cylinder, infinitely variable feed rate, with limit switch at end of cut. Rapid lowering of the saw frame from the resting position to the workpiece, then switch to standard saw feed (for example, for marking). Manual operation: the hydraulic cylinder functions as a brake cylinder (for example, for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 105 mm Cutting range at 90 degrees: flat 180 x 70 mm Cutting range at 45 degrees: round 120 mm Cutting range at 45 degrees: square 100 mm Bedpfx Aofc T Ugoiqjln Cutting range at 45 degrees: rectangular 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminum materials and light metal alloys, equipped with an electro-welded, carbide-tipped saw blade. Machine designed for miter cuts from 45° right to 45° left. Thanks to the adjustable vertical orientation, it is possible to perform cutting operations with a head inclined between 0° and 45° to the left.

Stanje: rabljeno, številka stroja/vozila: 008503, Max. panel width: 4300 mm Max. panel length: 4300 mm Max. main saw blade projection: 80 mm Number of clamps: 8 Bodpfjy Hcd Ejx Aiqeln

Stanje: rabljeno, Leto izdelave: 1985, Premer rezanja: 200 mm Dolžina žaginega lista: . mm Hod: . mm Skupna potrebna moč: . kW Teža stroja: pribl. . t Potreben prostor: pribl. . m Tehnični podatki so navedbe proizvajalca oziroma uporabnika in zato za nas niso zavezujoči. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši poslovni in prodajni pogoji. O nas: več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščne površine, nosilnost žerjava 70 t več kot 10.000 različnih artiklov dodatne opreme za vašo delavnico Želite prodati stroje, proizvodne linije ali vaše podjetje? V tem primeru nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po predhodnem dogovoru. Veselimo se vašega obiska. Bedpfxez Icx Ho Aiqjln Vaša ekipa Markus Hirsch.

Stanje: rabljeno, Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, nastavitev nagiba žaginega lista: 46 °, vrsta nastavitve višine: električni, izvrtina žagine plošče: 30 mm, vrsta aktuacije: električni, skupna masa: 1.100 kg, Oprema: dozator, zaščitni pokrov žaginega lista, Altendorf F45, krojna krožna žaga – leto izdelave 1991 Naprodaj je krožna žaga Altendorf F45, leto izdelave 1991. Stroj je opremljen z električnim nastavljanjem višine in električnim nastavljanjem nagiba žagalne glave, kar omogoča udobno upravljanje za natančno rezanje neposredno nad upravljalno ploščo. Upravljanje stroja poteka prek zgornje upravljalne enote. Poleg tega ima model F45 predrezalnik in preizkušen Altendorfov dvostranski omejevalnik. Oprema: - Proizvajalec: Altendorf - Model: F45 - Leto izdelave: 1991 - Serijska številka stroja: 91-09-280 - Glavni motor: 5,5 kW - Motor predrezalnika: 0,75 kW - Električno nastavljanje višine - Električno nastavljanje nagiba - Zgornje upravljanje - Predrezalnik - Altendorfov dvostranski omejevalnik - Digitalni vzporedni omejevalnik, nastavljiv ročno - Največji premer žaginega lista: 350 mm, pri uporabi brez klinastega vložka je možen tudi večji premer. - Krožni drsnik - Omejevalnik za obrezovanje in pod kotom Stroj ima glede na starost vidne znake uporabe in je v rabljenem stanju. Robustna konstrukcija Altendorf F45 ga naredi za preizkušen model krožne žage, primerne za uporabo v mizarjih in podjetjih za obdelavo lesa. Ogled in preizkus stroja sta možna po dogovoru. Blodpfxsz Ig Nie Aiqen

Stanje: rabljeno, številka stroja/vozila: 008348, Maks. širina panela: 4300 mm Bledpfx Aijyl Iiijqjn Maks. dolžina panela: 1600 mm Maks. izstop glavnega žaginega lista: 125 mm Število vpenjalnih čeljusti: 5

Stanje: rabljeno, številka stroja/vozila: 007614, Maks. obdelovalna širina: 1300 mm Delovna miza: nastavljiva Vakumski trak: da Blodpex A Tatjfx Aiqon Število delovnih agregatov: 3 kos