Kovinska žaga

Optimum S 131GH

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), barva: rdeča, Leto izdelave: 2024, obratovalne ure: 1 h, Oprema: 4-v-1 lopata, kabina,

Stanje: novo, Cutting capacity at 90 degrees (round): 125 mm Cutting capacity at 90 degrees (square): 125 mm Cutting capacity at 90 degrees (rectangular): 127 x 125 mm Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Dimensions (L x W x H): 720 x 380 x 450 mm Lrsdpfx Aheupw R Neusn Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. With the metal band saw you will work not only precisely, but also quickly: the blade speed can be variably adjusted between 38 and 80 meters per minute. Weighing only 25 kilograms, the saw is mobile and can be used on site.

Stanje: rabljeno, Leto izdelave: 2022, Technical details: Cutting diameter: 128 mm Saw band length: 1640 x 13 mm Saw band width: 0.64 mm Cutting range at 90° (round): 128 mm Cutting range at 90° (flat): 100 x 150 mm Cutting range at 45° (round): 90 mm Cutting range at 45° (square): 90 x 75 mm Band speed: 24 - 35 - 55 m/min Electrical connection: 220 V / Hz Total power requirement: 500 W Approx. machine weight: 80 kg Approx. machine dimensions (LxWxH): 0.95 x 0.52 x 1.1 m Lrodpfxou Nig Rs Ahujn The machine is unused—as new—in its original packaging. The bandsaw is manually operated. Suitable for steel, cast iron, and non-ferrous metals. Workpiece clamping with vise jaws operated by handwheel; one fixed jaw and one movable jaw; clamping range 165 mm, swivel range 60°. Adjustable length stop up to max. 85 mm (i.d.).

Leto izdelave: 2012, stanje: delavnici obnovljeno (rabljeno), Konvencionalni precizni stružnica WEILER "CONDOR VC" S triosnim digitalnim prikazovalnikom Siemens Leto izdelave: 2012 Vrtina vretena: 56 mm Razdalja med konicama: 800 mm Maksimalni premer nad posteljo: 205 mm Območje vrtljajev: 30 – 3500 rpm Z naslednjo opremo: - Nosilec orodja Multifix - Zadnja zaščitna stena proti ostružkom z notranjo osvetlitvijo - Naprava za hlajenje Lrsdpjxykz Asfx Ahuen - Tri-čeljustna vpenjalna glava Ø 200 mm - Zaščita vpenjalne glave - Sledilna luneta Ø cca 150 mm - Konjiček z izvlečnim vrtalnim pinolom - Navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Lodpfx Aerpi E Aehuorn

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN Lrjdpfx Ahohy Tp Djujn D-26345 Bockhorn/Grabstede, Germany

Leto izdelave: 2010, stanje: dober (rabljeno), Deli, prikazani z roko, niso priloženi. Stroj je popolnoma funkcionalen. Lrjdjyr N Tvepfx Ahujn

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Lrsdpfx Ahsu Rptyjujn Residual oil content under reference conditions

Stanje: novo, Leto izdelave: 2022, SPECIAL PRICE, stock machine year 2022, condition: new List price: €4,200 STOCK MACHINE – The ARG 235 plus is a manual metal bandsaw offering high cutting precision. This machine enables continuously adjustable mitre cuts from -45° to +30° (swivel range: 45° to the left and 60° to the right). Technical specifications: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Blade speed: 40 and 80 m/min Lrjdpfx Asmftv Rehuon ● Saw blade: 2710 x 27 x 0.9 mm Standard equipment: ● Powerful belt drive ● Infinitely variable feed adjustment from the operator panel ● Manual clamping of the workpiece, movable vice with dovetail guide ● Simple setting of the saw for mitre cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in various sizes and configurations!

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer Lrsdpfxshlp D No Ahuen - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.