Nastavitev Planer nakup rabljenega (3.272)

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Hfjdsd Hx Hpepfx Adrsh Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, CASADEI PFS 520 – Surface and Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron, stress-relieved to prevent distortion Smooth operation due to high dead weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutterblock, precision mounted Helical gear steel infeed roller for particularly uniform and gentle feeding of wood Outfeed roller with rubber coating Hfjdpfx Adobxz S Hsrsh Large surfacing fence, tiltable from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock System: Planer knife change in seconds When starting the machine, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection sets itself automatically, no adjustments or screws required The surfacing table is adjusted using a stable and precise parallelogram system, ensuring that the distance between the table edges and the cutterblock remains constant in any position The sturdy aluminum surfacing fence is anodized as standard, easily adjustable and provides a generous support surface Adjustable tilt from 90° to 45° is easily readable from the operator's position Auxiliary fence included as standard for safe planing, even of narrow workpieces Image shows machine with optional equipment The extraction port position remains the same for both surfacing and thickness planing No additional extraction hose or complicated repositioning around the machine is necessary Technical data: Total length of surfacing tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Fence dimensions: 1200 x 190 mm Fence tilt range: 90° – 45° Min./Max. planing height: 3 / 250 mm Cutterblock diameter/number of knives: 100 mm / 4 pcs Feed speed: 5 / 8 / 12 / 18 m/min Spindle speed: 5000 rpm Motor power: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease Hodpfx Asqlclbedrsfh 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Kataloška številka 7988 TEHNIČNI PODATKI - širina valja 510 mm - skobeljni valj s 4 noži - maks. debelina obdelovanca na debelinki 200 mm - maks. debelina obdelovanca na stranskih glavah, 3-stransko, 100 mm Hfjdpozc Nk Njfx Adreh Zgoraj: - zobniki - vstopni podajalni valj, zobat - skobeljni valj - pritisni valj - izhodni podajalni valj, gladek Spodaj: - nastavljivi valjčki v spodnji mizi, 2 kosa - vodilna letev Zadaj: - 2 stranska vretena + pritisni elementi - višina vretena 100 mm - maks. razmak med vreteni 510 mm - premer vretena 30 mm - ročna nastavitev vretena levo/desno - motor približno 2x3 kW - glavni motor 7,5 kW - priključek za odsesavanje 2x120 mm - skupne mere d/š/v 1700x1200x1000 mm - teža 1060 kg PREDNOSTI – poljska proizvodnja – 4-nožni valj – DTR dokumentacija – zelo dobro stanje – rabljeni skobeljni stroj Neto cena: 12 900 PLN Neto cena: 3 070 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo z večjimi nihanji)

Stanje: rabljeno, Various planer heads for Weinig Unicontrol. Bore diameter 40 mm. Hjdpfxjvzud Ue Adrefh

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: omejena funkcionalnost, CNC Gantry Milling Machine (Milling/Turning Center) | Manufacturer: DÖRRIES SCHARMANN | Model: 4FZT | Year of manufacture: 1996 Hfedsyuptzepfx Adrsh A high-performance gantry milling machine designed for the machining of large workpieces. Main areas of application are the milling and turning of large, complex workpieces. The machine can be inspected under power by appointment. Condition: As per year of manufacture, partial overhaul required. This is a very high-quality machine, therefore absolutely worthy of modernization/complete overhaul – highly recommended. TECHNICAL DATA: Main dimensions: - Machine width: 13,230 mm - Machine height above floor: 8,450 mm - Machine length: 31,100 mm - Machining length: 11,000 mm - Passage width: 4,400 mm - Passage height from table surface to spindle nose of standard milling head: 3,000 mm Table: - Table width: 3,450 mm - Total table length: 13,400 mm - Single table length: 6,200 mm - Total clamping area: 3,450 x 11,000 mm - Clamping area single table: 3,450 x 5,000 mm - Maximum permissible workpiece weight total table: max. 112 t - Maximum permissible workpiece weight single table: max. 80 t Crossbeam: - Travel: 2,000 mm Milling and drilling support: - Drive power for milling and drilling operations (spindle): 80 kW - Max. spindle speed: 2,500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - Control system: SINUMERIK 880 - 2 x chip conveyors - Documentation - CE marking No guarantee for completeness or accuracy of technical specifications and equipment. Subject to prior sale. A detailed technical data sheet and further information on equipment available on request.

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hfjdpfju Nc Emox Adreh Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Stanje: rabljeno, Rabljeni stroj Hfodpsy R E U Ijfx Adreh Oprema in tehnični podatki: - 4-rezilna glava rezkalnika - Hitrost pomika 7,5/15 m/min - Skobeljni stroj: - Delovna širina: 500 mm - Skupna dolžina mize: 2200 mm - Motor: 4 kW - Debelinka: - Minimalna delovna višina: 3 mm - Maksimalna delovna višina: 235 mm - Maksimalni odvzem: 8 mm - Digitalni prikaz nastavitve višine z decimalnim prikazom Razpoložljivost: kratkoročno Lokacija: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 29.081 h, Funkcionalnost: popolnoma funkcionalen, CNC control system HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE Hfsdpfx Aeyrndmedrsh 15" TFT color flat-screen with softkeys RAM: 4 GB Hard drive: 32 GB, of which at least 21 GB program memory Input unit / display increment linear axes: up to 0.1 µm Input unit / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with rotated machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic mounting Enable switches / deadman switches according to CE Travel distances X-axis / longitudinal axis: 4,000 mm Y-axis / cross axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / Connection / Pneumatics Max. feedrate interpolating axes: 40 m/min Installed power: 60 kVA Max. current consumption: 150 A Pneumatic air consumption: 400 Nl/min Pneumatic working pressure: 6 bar Clamping Table / Floor Plate Sunken clamping table with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling Head / Universal Milling Head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining possible up to 10° Integrated cooling of torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. rotational speed A-/C-axes: 30 rpm Working torque A-/C-axes: 450 Nm Clamping torque axes: 1,400 Nm Axis positioning inaccuracy A-/C-axes: 8 arcsec Axis positioning scatter A-/C-axes: 4 arcsec Main Spindle Spindle output S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant output: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool interface: HSK-A63 DIN 69893 Thread cutting rigid / Rigid Tapping for electro-spindle Software / Calibration Dynamic RTCP Software AUTOCAL software for automatic calibration 3D Form Inspect M&H Software Software for measuring 3D forms, tools, molds, and dies Measurement program creation directly via coordinate points / surface points Vibration / Collision Monitoring Sensor for detection of vibrations Detection of collisions and excessive vibrations in 3 axes Response time approx. 1 ms Electronic interface for function testing Tool Changer Tool changer with arm for tool change Overlapped-wheel version Full enclosure for operator safety Tool stations: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent stations: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Stanje: novo, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03967007, vrsta vhodnega toka: Enosmerni tok, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, neprekinjena moč: 1,01 kW (1,37 KM), Oprema: Na voljo je tipska ploščica, Ponujamo v prodajo novo stroj za čelno obdelavo cevi Orbitalum RPG 8.6, letnik 2017. Stroj za čelno obdelavo cevi proizvajalec: Orbitalum tip/model: RPG 8.6 dev. št.: 03967007 leto izdelave: 2017 Hodpfx Aozcl Iwjdrsfh premer cevi: 50,8 – 219,1 mm maks. debelina stene: 3,6 mm napetost: 230 V frekvenca omrežja: 50/60 Hz vhodna moč: 1010 W Priložen je originalen transportni kovček. Na voljo imamo tudi vložke različnih velikosti za stroje RPG 2.5 in 8.6. Za vprašanja ali dodatne informacije nam pišite ali pokličite.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 10.900 mm, dolžina podajanja os X: 10.200 mm, dolžina pomika po osi Y: 1.960 mm, dolžina podajanja os Z: 1.850 mm, višina skobljanja: 1.850 mm, širina skobljanja: 1.750 mm, hitrost vretena (min.): 9.000 obr/min, WALDRICH COBURG Hydraulic Double-Column Planer and Grinding Machine Control: Conventional contactor control system Operation: Original Waldrich Coburg main control panel with push buttons, rotary switches, analog displays, and emergency stop Display / Positioning: 2 x HEIDENHAIN POSITIP digital position indicators / position control aids at the main control panel Additional control units: Siemens SIMATIC HMI KTP700 / KTP400 for grinding support and grinding attachment Partial retrofit 2021: approx. EUR 170,000 Ongoing modernizations / retrofit until 2021 Retrofitted grinding attachment Modernized grinding support Siemens / Lenze drive technology Electrical cabinet and modernization documentation available Working area Maximum planing width / clamping width: 1,750 / 1,790 mm Maximum pass-through height: 1,850 mm Total clamping surface: 10,900 x 1,500 mm Additionally documented: 2 x 4,750 x 1,500 mm Usable table/length according to card: approx. 10,200 mm T-slots: 7 T-slot spacing: 210 mm T-slot width: 28 mm Smallest width between crossrails/end stands: 420 mm Crossrail / Columns / Supports Number of crossrails: 2 Number of columns: 2 Crossrail horizontal travel: 1,960 mm Crossrail vertical travel: 250 mm Column horizontal travel: 550 mm Column vertical travel: 1,850 mm Support swiveling range: +/- 60° Support tilting range: +/- 25° Speeds / Feeds Working speed: 5 - 60 m/min Return speed: 5 - 60 m/min Vertical feed cross-planer slide: 0.1 - 7.5 mm Horizontal feed cross-planer slide: 0.1 - 15 mm Vertical feed column slide: 0.1 - 7.5 mm Hfsdpoy Ubn Sefx Adreh Horizontal feed column slide: 0.1 - 7.5 mm Dimensions / Weight / Electrical Connection Floor space required: 22.67 x 3.97 m Height: 3.95 m Weight: approx. 51,872 kg Voltage: 500 V Fuse: 125 A Current type: Three-phase current Frequency: 50 Hz Grinding support / Grinding attachment Grinding support with grinding spindle Guideway system with base body and Z-axis Y-axis grinding support retrofitted to ballscrew 40 x 10 Preloaded double nut Single-axis control for infeed axis Bevel gear motor 72 Nm Synchronous servo motor 11 Nm with absolute encoder Rittal compact control cabinet Grinding spindle / Grinding wheel drive Siemens asynchronous motor for grinding spindle 9 kW at 1,500 rpm / 57 Nm 10 kW at 1,750 rpm / 55 Nm Max. speed: 9,000 rpm Siemens SINAMICS drive technology Siemens SIMATIC operator unit for grinding support / grinding attachment Lenze L-force axis drive for Y-axis grinding support Separate control cabinets for grinding wheel drive and Y-axis grinding support Cooling / Hydraulics Schimpke DK150-V cooling unit Cooling capacity approx. 17.5 kW Cooling medium: Oil ISO VG46 Gear pump approx. 135 l/min at 10 bar Pump motor approx. 5.5 kW Transformer 500 V to 400 V Separate hydraulic / aggregate block available Mechanics / Overhaul Partial overhaul on bed/table, crossbeam with slides Y1/Y2, Z1-axis planer support, and lubrication system Machine bed hand-scraped Bed geometry restored Table hand-scraped Guideways reworked Slides Y1/Y2 hand-scraped Gibs coated and hand-scraped Steel band replaced Central lubrication system expanded Wipers replaced Crossbeam lift repaired Worm shaft, central drive shaft, coupling pieces and rolling bearings replaced Bellows on X-axis replaced Condition / Equipment Column area newly painted Table and functional surfaces in very good condition Accessories, assemblies, and spare parts available

Stanje: novo, Kataloška številka S0232 - nov stroj, na zalogi - certifikat CE - širina valja 410 mm - 4-nožni valj - varovani nožni valj Ø 125 mm - rezila za skobljanje 410x35x3 mm - debelina odrezka 8 mm - število obratov 4700 obr/min - motor 4,0 kW - napajanje 3x400V - dolžina mize 2650 mm - dolžina dovajalne mize 1500 mm - dolžina odvzemalne mize 1100 mm - nagiben vodnik 0°-45° 1500x155 mm - priključek za odsesavanje Ø 160 mm - dimenzije dolžina/širina/višina 2650/900/1000 mm - teža 720 kg Cena neto: 21.000 PLN Hodpfx Adozcu Uajrsfh Cena neto: 4.900 EUR glede na tečaj 4,20 EUR (Cene se lahko spremenijo ob večjih nihanju)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7916 TEHNIČNI PODATKI - širina valja: 510 mm - število nožev: 4 kosa - maks. debelina obdelovanca: 300 mm – od zgoraj: - povratne zapore / odbijači - uvajalni zobati, vlečni in vrtljivi valj - pritisni valj - skobelni valj - pritisni valj - izhodni gladki vlečni valj – od spodaj: - nastavljiv vlečni valj v spodnji mizi, 1 kos - motor: 6,8 kW - električno dviganje mize - 4 hitrosti podajanja: 5/10/15/20 m/min - premer izsesavalnega nastavka: 170 mm Hodpfjzcu Tvox Adrefh - dimenzije (d/š/v): 1120x1000x1100 mm – teža: 650 kg PREDNOSTI – italijanska proizvodnja – znamka CASADEI – maks. višina skobljanja: 300 mm – električno dviganje mize – ena pogonska rolna nameščena v mizo za podporo napredovanju obdelovanca – rabljena debelinka, zelo dobro ohranjena Neto cena: 17.900 PLN Neto cena: 4.260 EUR (glede na tečaj 4,2 PLN/EUR) (Cene se lahko spreminjajo glede na nihanja tečaja)

Stanje: zelo dobro (rabljeno), Catalogue number 6747 TECHNICAL DATA - Max. planing width: 170 mm - Max. planing height: 130 mm 7 spindles: 1) bottom horizontal, 170 mm, 4 kW 2) right vertical, 130 mm, 5.5 kW 3) left vertical, 130 mm, 5.5 kW 4) right vertical, 130 mm, 5.5 kW 5) top horizontal, 170 mm, 4 kW - 5th spindle electrically adjustable up/down 6) bottom horizontal, 170 mm, 5.5 kW 7) universal, 170 mm, adjustable at 180°, 7.5 kW - All spindle diameters: 35 mm - All spindles adjustable up/down and left/right - From above: 6 toothed feed rollers, including 2 double ones - From above: 4 rubber outfeed/drive rollers - Pneumatically pressed rollers - 1 side pressure roller - 2 table guide rails - Electric adjustment of planing thickness, 0.37 kW - Infeed table length: 2480 mm - Infinitely variable feed speed - Feed motor: 2.2 kW - Extraction port diameters: 1x135 mm, 5x120 mm - Dimensions (L/W/H): 5550x1900x1660 mm - Weight: approx. 3,500 kg ADVANTAGES Hodpfxszcu Rze Adrsfh – German-made – 7-head configuration – Universal spindle – Used planer, very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, širina skobljanja: 530 mm, premer orodja: 120 mm, število rezil: 4, vrsta aktuacije: električni, največja hitrost vrtenja: 4.600 obr/min, skupna dolžina površin za skobljanje: 900 mm, skupna masa: 690 kg, Oprema: CE označba, dokumentacija / priročnik, HOUFEK Debelinka 530 mm | 5,5 kW | 4 noži | Električna nastavitev višine mize | 2017 HOUFEK!! PROFESIONALNA DEBELINKA HOUFEK! Profesionalni debelinski skobeljni stroj za obdelavo lesa iz leta 2017. Rabljena, popolnoma delujoča in pripravljena za delo. Robustna konstrukcija s težo 690 kg zagotavlja stabilnost in visoko kakovost obdelave materiala. TEHNIČNI PODATKI: - Največja širina obdelovanca: 530 mm - Najmanjša dolžina obdelovanca: 320 mm - Delovna višina: 3–250 mm - Dolžina delovne mize: 900 mm - Širina delovne mize: 550 mm - Glavni motor: 5,5 kW (7,5 KM) - Hitrost vretena: 4600 obr./min - Število nožev: 4 kos (TERSA) Hfedpfjzc U Nksx Adreh - Premer vretena: 120 mm - Dolžina vretena: 550 mm - Pogonski motor: 0,58 / 0,75 kW - Hitrost pomika: 4 / 8 m/min - Priključek za odsesavanje: 150 mm - Napajanje: 400 V / 50 Hz - Mere stroja: 1050 × 1000 × 1200 mm - Teža: 690 kg OPREMA: - Električna nastavitev višine mize - Mehanska meritev položaja mize - Avtomatsko stikalo zvezda-trikot - Segmentni pritisk podajalnih valjev - Zobata podajalna valj - Štiritočkovna podpora delovne mize - Dve hitrosti podajanja: 4 in 8 m/min - CE certifikat Stroj je idealen za uporabo v mizarski delavnici, žagi ali podjetju za izdelavo pohištva in lesenih elementov. Stanje: rabljeno, običajni znaki uporabe glede na starost. Možnost ogleda na lokaciji. Možno preizkusiti stroj na mestu. Možen nakup stroja na lizing ali obročno odplačevanje. Stroj je tehnično preverjen in pripravljen za nadaljnjo uporabo. Možnost zagona in testiranja stroja na mestu, kar omogoča oceno delovanja in parametrov pred nakupom. Za udobje strank nudimo možnost financiranja nakupa z lizingom ali obroki. Pomagamo pri urejanju formalnosti in izbiri najugodnejše oblike financiranja. ORGANIZIRAMO PREVOZ KJE SI LAHKO OGLEDATE NAŠE STROJE? JBS OBDELOVALNI STROJI WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl tel: 664 335 465 tel: 530 632 386

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Štiristranski skobeljni stroj SCM SUPERSET XL Leto izdelave: 2007 Stroj je deloval le 50 ur, praktično kot nov. Tehnični podatki: • Delovna širina do 240 mm • Delovna višina do 120 mm • Hitrost vrtenja vreten: 6000 obr./min • Brezstopenjsko nastavljiv pomik 5-25 m/min • Razporeditev vreten (5 vreten): - spodnje 7,5 kW - desno 7,5 kW Hedpfx Adsyhhx Nerofh - levo 7,5 kW - zgornje 7,5 kW - spodnje 7,5 kW • Vsa vretena za orodja z neodvisnimi motorji Stroj ima 2 navpični vreteni (2 in 3) s hitromenjalnimi priključki HSK85S.

Stanje: dober (rabljeno), Koda: 0388 Znamka: SAC Model: FS 530 Oblični skobeljni stroj z noži ‘Tersa’ za mizarstvo, pohištvo, pohištvo po meri, leseno stavbno pohištvo, vrata, lesene konstrukcije, žage, plastiko in razno drugo. Lastnosti: - Tog jeklen podstavek - Brušena in uravnotežena jeklena vretena - Nizka raven hrupa - Nagibno vodilo od 0° do 45° - Prikazovalnik pomika - Vreteno z noži ‘Tersa’ Tehnični podatki: Hfsdjy Spqcjpfx Adreh - Delovna širina: 530 mm - Skupna dolžina mize: 2890 mm - Višina mize: 800 mm - Število nožev: 4 - Maks. odvzem: 20 mm - Motor: 4 Hp - Nagibno vodilo – dimenzije: 120 x 160 mm - Skupne mere: 2890 x 900 x 960 h mm - Teža: 800 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina skobljanja: 510 mm, premer orodja: 110 mm, število rezil: 4, vrsta aktuacije: električni, – Zelo dobro stanje – Italijanska proizvodnja – Tih način delovanja TEHNIČNI PODATKI: – Širina skobljanja: 510 mm – Višina skobljanja: 250 mm – Moč motorja: 4 kW – Število nožev: 4 kosi – Premer vretena: 110 mm – Vlečni valj v mizi Hfsdpezcpf Tsfx Adreh – Električna nastavitev višine – Vrstica protizateznih lopatic – Zobata vrtljiva os – Gladka jeklena os – 4 hitrosti podajanja: 5 / 8 / 12 / 18 m/min – Premer priključka: 160 mm – Dimenzije stroja (D/Š/V): 110 / 110 / 130 cm – Teža: 650 kg

Stanje: zelo dobro (rabljeno), Katalogska številka 7734 TEHNIČNI PODATKI - širina valja 630 mm - max. debelina obdelovanca 230 mm - skobeljni valj s 4 noži * zgoraj: - zaskočniki - nazobčan podajalni valj - pritisni valj - skobeljni valj - pritisni valj - 2 izhodna gladka pogonska valja * spodaj: - nastavljiv valj v spodnji mizi - motor cca 7,5 kW - brezstopenjska regulacija podajalne hitrosti - premer izsesovalnega nastavka 145 mm - dimenzije d/š/v 1250x1300x1300 mm Hsdozcmx Dspfx Adrjfh - teža 908 kg PREDNOSTI – italijanska izdelava – zelo dobro stanje – rabljeni debelinko Neto cena: 21.900 PLN Neto cena: 5.200 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: novo, Leto izdelave: 2024, Technical Data - Planing width: 510 mm - Infeed table length: 1620 mm - Outfeed table length: 1170 mm - Total table length: 2850 mm - Motor power: 5.5 kW / 7.5 HP - Cutterhead speed: 5,000 rpm - Extraction port diameter: 160 mm - Voltage: 400 V / 50 Hz - Required space: 2850 x 1420 mm - Colour: Light grey / Violet blue - Weight: approx. 1,050 kg Description - Solid German engineering - For surfacing and jointing, including concave and convex joint adjustment for PLANING WIDTH up to 510 mm and max. cutting depth up to 8 mm Hfedefg Uzbepfx Adrsh - Ergonomic working position directly at the cutterhead - Solid steel spiral cutterhead - Cleaning set for spiral cutterhead - Finely planed cast iron tables, total table length 2850 mm - Control panel at eye level with digital display of cutting depth and current outfeed table setting (neutral, concave and convex joint), including template holder and practical tool tray - Motorised adjustment of the infeed table via push button - Concave and convex joint adjustment on outfeed table - Serrated table lips for noise reduction - Fence depth and tilt adjustment by single lever control, tiltable up to 45° on extremely smooth steel guide - Fence rail anodised - Swivelling auxiliary fence type 1545 - Console for power feed unit - Bridge guard TXF type 1570 with foldable cover - Automatic motor brake - Automatic star-delta start, motor protection switch - Factory-calibrated

Stanje: novo, Kataloška številka: S097 PREDNOSTI – Stroj je nov, na zalogi – Širina valja 530 mm – Stružni valj s 4 noži – Zgornja upravljalna plošča – Dolge mizne površine – Z dušilnim grebenom pri valju – Motor 5,5 kW – Robustna konstrukcija TEHNIČNI PODATKI Delovna širina: 530 mm Dimenzije delovne mize: 2900 × 540 mm Maks. globina obdelave: 8 mm Obrati rezkalne glave: 4700 U/min Premer rezkalne glave: 125 mm Število nožev: 4 kos Dimenzije nožev: 540 × 35 × 3 mm Dimenzije litoželezne vodilnice: 1500 × 155 mm Moč motorja: 5,5 kW Premer odsesovanja: 160 mm Teža: 800 kg Hfsdpfezcd I Njx Adroh Neto cena: 27.000 PLN Neto cena: 5.960 EUR

Stanje: novo, Kataloška številka O231 - Nova naprava, na zalogi - CE certifikat TEHNIČNI PODATKI - Moč motorja 5,5 kW (7,5 HP) - Moč pogonskega motorja 0,5 kW (0,75 HP) - Premer gredi 120 mm - Hitrost vrtenja 5500 obr/min - Hitrost pomika 4 – 20 m/min - Maks. širina obdelovanca 630 mm - Min. dolžina obdelovanca 280 mm Hfedpfx Adozcd Ddsrsh - Maks. višina obdelovanca 300 mm - Najmanjša debelina 5 mm - Maks. globina reza 8 mm - Število nožev 4 kosi - Premer odsesovalnega priključka 160 mm - Dimenzije stroja 1250 x 1270 x 1180 mm - Teža 870 kg Izvirne fotografije Neto cena: 35.000 PLN Neto cena: 8.300 EUR (odvisno od tečaja 4,2 EUR) (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 6946 TEHNIČNI PODATKI - maks. širina obdelovanca: 210 mm - maks. debelina obdelovanca: 120 mm - število vreten: 2 kosa - premer vretena: 50 mm Zgornji del: - 3 dovodni, vlečni, gumirani, gladki valji, od tega 2 dvojna - 2 izhodna, gumirana, vlečna valja, od tega 1 dvojni - glave na nosilcih - nastavitev glav gor/dol - električna nastavitev višine zgornje glave - električna nastavitev debeline skobljanja - vretena opremljena z zavoro - glavni motor 2×5,5 kW - brezstopenjska nastavitev hitrosti podajanja - podajalni motor 3 kW - podajanje preko kardanske gredi - premer odsesovalnega priključka 2x160 mm - dimenzije d/š/v: 2350x1780x1950 mm - teža: 1882 kg – nemška proizvodnja – brušilni nastavki za ostrenje nožev na glavi – 2 Hydro glavi v kompletu – ni prebarvana – zelo dobro stanje, rabljena skobeljna Cena brez DDV: 33.900 PLN Hedpfx Aszcdz Aedrefh Cena brez DDV: 8.070 EUR Cena preračunana po tečaju 4,2 PLN/EUR (pri večjih spremembah tečaja se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7479 Tehnični podatki: - širina valja: 410 mm - 4-nožni valj (TERSA) - dušilni glavnik - zaščita valja Hedszcdh Ajpfx Adrsfh - dolžina miz: 2610 mm - daljša dovajalna miza: 1435 mm - litoželezne mize - obe mizi nastavljivi - originalno litoželezno vodilo nastavljivo pod kotom - zavora - premer odsesovalnega priključka: 115 mm - motor: 4 kW - mere d/š/v: 2610x960x1110 mm - teža: 578 kg PREDNOSTI – italijanska proizvodnja – 4-nožni valj – zavora – dušilni glavnik – daljša dovajalna miza – nelakirana – rabljeni skobeljni stroj, zelo dobro ohranjen, originalna tehnična dokumentacija DTR Neto cena: 21.900 PLN Neto cena: 5.200 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: zelo dobro (rabljeno), Kataloška številka: 7987 TEHNIČNI PODATKI - širina valja: 500 mm - število nožev: 4 kosi - maksimalna debelina obdelovanca: 230 mm – zgoraj: - zadrževalni zatiči - zobat, vlečni, vrtljiv podajalni valj - pritiskač - skobeljni valj - pritiskač - gladki izhodni vlečni valj - motor: 4 kW - električno dviganje mize - 2 hitrosti pomika: 8/12,5 m/min - mere (d/š/v): 1000x1000x1050 mm Hfsdpfxozcc U Io Adroh - teža: 620 kg PREDNOSTI – italijanska proizvodnja – rabljeni debelinski skobeljni stroj, zelo dobro ohranjen Neto cena: 14.900 PLN Neto cena: 3.550 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)