Nastavitev noža

WEINIG

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Weinig Powermat 700 Bdodpsziad Eefx Ag Ejd Šestvreten četiristranski skobeljni stroj Spodaj - desno - levo - zgoraj - zgoraj - spodaj Stroj kot nov – 0 delovnih ur 6x Weinig Powerlock z 8000 obr/min Podajalna hitrost 5-40 m/min Podajalna miza 2 metra Osna in radialna CNC-nastavitev za vretena 2, 3 in 5, 6 Radialna CNC-nastavitev za vreteno 4 Mizne plošče z Marathon prevleko Avtomatska črpalka Waxilit Koncept upravljanja Comfort Set Powercom Plus

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication Bsdpfxjwvqklj Ag Ejdd • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), CATALOG NUMBER: 7133 TECHNICAL DATA - Maximum working width: 220 mm - Maximum working height: 120 mm – 5 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm; Spindles 2 and 3: 11 kW 4) Upper horizontal: 220 mm, 11 kW 5) Lower horizontal: 220 mm, 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm - Pneumatic pressure rollers - 4 upper, toothed infeed rollers (2 double) - 1 upper double outfeed roller, smooth and rubber-coated - Lower outfeed roller, rubber-coated - Feed on Cardan shafts - Feed speed adjustment - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - Electrically adjustable planing thickness - Infeed table length: 1970 mm - Centralized lubrication - Extraction port diameter: 4 x 120 mm, 140 mm - Dimensions (L x W x H): 3500 x 1550 x 1400 mm Bdsdozh Iu Aopfx Ag Esd - Weight: 1750 kg ADVANTAGES – Equipped with 5 heads – Made in Germany – Not repainted – Used planer, very good condition Net price: 43,900 PLN Net price: 10,450 EUR (depending on the exchange rate of 4.2) (Prices may change with significant exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Bjdpfx Agov Tb Hge Esdd Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Bdjdpfx Agev Si Sze Eed Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: zelo dobro (rabljeno), Catalogue number: 7715 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm – From above: - 6 infeed driven double-toothed rollers + 1 single roller - 3 outfeed driven rubber rollers, double smooth + 3 single - Meter counter – From below: - Infeed driven, toothed, swivelling roller in lower table - 3 metal driven smooth rollers - Feed on Cardan shafts - Pneumatic roller pressure - Stepless feed speed adjustment + 2 speed ranges 10-60 m/min - Feed motor 10 kW - Electric planing thickness adjustment - Lifting motor for machine body 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (L/W/H): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight: approx. 5000 kg ADVANTAGES Bdjdpfxszh Ipme Ag Eed – Equipped with 8 cutterheads – Universal spindle – Ideal for both wet and dry timber – German-manufactured, WEINIG brand – Not repainted – Very low operating hours – Used planer, excellent condition Net price: 145,900 PLN Net price: 34,750 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may vary depending on exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 6575 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Bottom horizontal: 230 mm, 11 kW 2) Right vertical: 170 mm 3) Left vertical: 170 mm (2nd and 3rd spindle), 11 kW 4) Right horizontal: 170 mm, 5.5 kW 5) Top horizontal: 230 mm, 11 kW 6) Bottom horizontal: 230 mm, 7.5 kW 7) Universal: 230 mm, swivel 360°, 7.5 kW - All spindles adjustable vertically/horizontally - 3rd and 5th spindles adjustable electrically - ATS - Spindle diameter: 40 mm - Electric brakes - From above: 4 driven, toothed infeed rollers (including 1 double) - From above: double rubber infeed roller - From above: double rubber outfeed roller - From below: 2 smooth metal feed rollers - From below: double rubber feed roller - Feed via Cardan shafts - Pneumatically pressed rollers - Variable feed speed: 6–24 m/min - Feed motor: 5.5 kW - Electrically controlled thickness adjustment - Motor for raising machine body: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 7 x 140 mm - Dimensions (LxWxH): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg ADVANTAGES – German production, WEINIG brand – 7 heads – Universal spindle – With ATS – For wet and dry wood – Used planer/moulder, in very good condition Net price: 146,900 PLN Bdodpfszh Ipaox Ag Ejd Net price: 34,980 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Ponujamo rabljeno hidro-toplotno napravo za obdelavo lesa IWT Moldrup-SPP Industrijska naprava MOLDRUP-SPP je zasnovana za hidro-toplotno modifikacijo lesa premerov do 2.600 mm in dolžin do 12.000 mm. Izdelana je iz robustnega nerjavečega jekla ter konstruirana za neprekinjeno industrijsko proizvodnjo z v celoti avtomatiziranim PLC-krmiljenjem. Industrijska hidro-termična naprava za obdelavo lesa – Ø2.600 x 12.000 mm Industrijska naprava za hidro-toplotno obdelavo je namenjena učinkoviti in enakomerni termični modifikaciji lesa v nadzorovanem, kisika prostem okolju. Jedro naprave predstavlja robusten nerjaveč jekleni avtoklav Ø2.600 mm × 12.000 mm, ki omogoča obdelavo približno 15–22 m³ lesa na eno polnjenje, pri obratovalnem tlaku do 12 bar (absolutno). Popolnoma avtomatiziran sistem s PLC-krmiljenjem omogoča natančen nadzor vakuuma, tlaka, temperature in večfaznih procesnih ciklov. Integriran vakuumski sistem zagotavlja varno odstranjevanje kisika, medtem ko sistem ogrevanja s termalnim oljem skrbi za natančno upravljanje temperature tekom celotnega postopka. Celotna postavitev obsega tlačno posodo, ogrevalni sistem, vakuumsko črpalko, cirkulacijski ventilator, sistem za ravnanje s kondenzatom, nakladalni voziček ter varnostno opremo. Priloženi so tudi agregat za ogrevanje s termalnim oljem (boiler skid) in naprava za nadzor emisij. Tehnična dokumentacija je na voljo na zahtevo. Bdodpfeymxqasx Ag Esd Hidro-toplotna naprava za obdelavo lesa se prodaja v videnem/obstoječem stanju. Za vsa dodatna vprašanja ali več informacij nam lahko pišete ali nas pokličete.

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250 mm - Shaft width: 400 mm - Shaft diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2130 mm From above: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth type - Shaft with saw blades - Smooth, pressure shafts, 4 pcs From below: - Slip shaft, smooth type - Pawls - Tracking chain Feeder table with guide rail - Roller width: 460 mm - Feeder dimensions (LxW): 1660x630 mm - Overall dimensions (LxW x H): 2010x630x900 mm Outfeed table - Feed rollers: 8 pcs - Roller width: 800 mm - Overall dimensions (LxWxH): 4400x980x880 mm - Central lubrication - Electric height adjustment of the top frame: 0.55 kW - Electric saw shaft adjustment: 0.55 kW - Stepless feed speed adjustment: 1–39 m/min - Feed motor: 1.1 kW - Main motor: 30 kW - Extraction port diameter: 210 mm - Overall dimensions of multirip saw (LxWxH): 2520x1870x2000 mm + control panel - Total weight: approx. 2500 kg ADVANTAGES – Made in Germany – High cutting height Bsdpfx Ajzh Ilzsg Eodd – Infeed and outfeed table – Used multirip saw in very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 8017 TEHNIČNI PODATKI - širina gosenice 335 mm - širina valja 400 mm - največji premer rezila 350 mm - premer odprtine rezila 80 mm - največja višina reza 120 mm - širina mize s svetlobno odprtino 700 mm - dolžina mize 1720 mm Zgornji del: - odbijači/zaklepi - kovinski drsni pritisni valj - odbijači/zaklepi - kovinski drsni pritisni valj - valj z žagami - drsni pritisni kovinski valj, 2 kosa Spodnji del: - pnevmatsko vodilno letev Bdjdpfxozh Ik Ro Ag Eed - kovinski drsni valj - odbijači/zaklepi - gosenica - kovinski drsni izhodni valj - električno dviganje ohišja 0,35 kW - ročno dviganje valja z žagami - centralno mazanje - brezstopenjsko nastavljanje hitrosti podajanja 1,5 kW - glavni motor 30 kW - laser 3 kosi - plavajoče rezilo - dodatna tulec za večlistno žago - čiščenje žag - premer odsesovalnega priključka 260 mm - skupne dimenzije dolžina/širina/višina 2300x2000x2150 mm - teža približno 3000 kg PREDNOSTI – nemška proizvodnja – plavajoče rezilo – 3 laserji – čiščenje žag – dodatna tulec za večlistno žago – pnevmatsko nastavljiva vodilna letev – brezstopenjska regulacija hitrosti – rabljena večlistna žaga, zelo dobro stanje Neto cena: 136.900 PLN Neto cena: 32.595 EUR (glede na tečaj 4,20 EUR) (Cene se lahko spreminjajo glede na nihanja tečaja)

Stanje: novo, Mere D-Š-V 1700 x 485 x 950 mm Teža 116 kg Število predalov 6 kosov Notranje mere zgornjega predala 1390 x 360 x 60 mm. Notranje mere drugega desnega predala 910 x 380 x 90 mm. Notranje mere drugega, tretjega in četrtega levega predala 440 x 380 x 90 mm. Notranje mere petega levega predala 440 x 380 x 210 mm. Notranje mere police za vrati 940 x 450 x 390 mm. Dimenzije koles 150 x 40 mm. Bdsdpfou Imfuex Ag Ejd Debelina delovne plošče iz masivnega lesa 40 mm. Mere pakiranja 153 x 49 x 96 cm. Teža 116 kg.

Stanje: zelo dobro (rabljeno), Catalogue number 7308 TECHNICAL DATA - Track width: 250 mm - Shaft width: 350 mm - Shaft diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width (with clearance): 700 mm - Table length: 1790 mm From above: Bjdszh Ia Sjpfx Ag Eodd - Pawls - Pressure, slip shaft - Pawls - Pressure, smooth shaft - Shaft with saw blades - Smooth, pressure shaft, 2 pcs From below: - Guide bar - Slip, smooth shaft - Pawls - Crawler track Feeding table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimensions of feeding table (L/W/H): 580x530x900 mm Discharge table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimensions of discharge table (L/W/H): 1210x535x900 mm - Central lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction outlet diameter: 140 mm - Overall dimensions of multirip saw (L/W/H): 2000x1450x2000 mm - Total weight: approx. 3000 kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change)

Stanje: rabljeno, Leto izdelave: 2002, skupna širina: 600 mm, skupna dolžina: 600 mm, skupna višina: 800 mm, Barva: siva Lastna teža: 50 kg Cena: na zahtevo - Leto izdelave: 2002 - Dokumentacija na voljo: ne - CE certifikat na voljo: ne - Serijska številka: 97370 - Model merilne naprave: naprava za prednastavljanje orodij - Možnosti: digitalni prikaz - Transportne mere: 600 mm x 600 mm x 800 mm (d x š x v) - Transportna teža [kg]: 50 kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: navedena cena je brez DDV DDV/obdavčitev z razliko: DDV je odbiten za podjetnike Bdodpfx Aeyu Sl Heg Esd Dostava in odkup možna kadarkoli za vse iz industrijskega področja. Lukas van Rossum

Stanje: pripravljen za uporabo (rabljen), 4 telescopic drawers, size: 450 x 600 mm Bsdpfoixzzrex Ag Esdd Drawers with adjustable height, currently set for filling heights of: 100, 120, 250, and 320 mm Space requirement: 720 x 550/750 x 1170 mm

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7890 Technical Data: - Track width: 245 mm - Arbor width for edger: 380 mm - Arbor width for multi-blade saw: 320 mm - Max. saw blade diameter: 350 mm - Arbor hole diameter for edger: 80 mm - Arbor hole diameter for multi-blade saw: 65 mm - Max. cutting height: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm From above: - Pawls/kickback devices - Smooth pressure roller - Pawls - Smooth pressure roller - Insert for short workpieces - Saw spindle - 2 smooth pressure rollers From below: - Guide - Pawls/kickback devices - Track - Central lubrication - Laser - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 30 kW - Manual body lifting - Manual lifting of saw spindle - Extraction connection diameter: 210 mm - Overall dimensions (L/W/H): 1900x1500x1800 mm - Weight: approx. 2000 kg ADVANTAGES - Made in Germany - Stepless feed speed adjustment - Floating saw blade spindle for edging - Multi-blade saw bush included - Laser - Insert for short workpieces - Used multi-blade saw, very good condition Net price: PLN 55,900 Net price: EUR 13,300 based on an exchange rate of 4.2 EUR Bsdpjzhvhkjfx Ag Eedd (Prices may change with significant fluctuations)