Orodna omara s teleskopskimi predali

Stanje: zelo dobro (rabljeno), Swing diameter over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing diameter over cross slide 700 mm Spindle bore 128 mm Spindle speeds 6.4–1,600 rpm SIEMENS 810 D control system Various accessories Ffjdpfxjwhkdcs Aflet MARCELS MASCHINEN CH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 52.000 mm, skupna širina: 24.000 mm, skupna višina: 10.500 mm, vhodna napetost: 400 V, delovna višina: 1.050 mm, skupna masa: 2.000 kg, priključek za stisnjen zrak: 6 letvica, premer vrtanja: 180 mm, zračni tlak: 6 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, moč: 2,5 kW (3,40 KM), 8. Sept. | Bohrmaschinen METRAL Doppelkopf-Bohrmaschine TD3-2000, Baujahr 2003, 2023 komplett überholt Technische Daten: Ffodpforg E Hcjx Aflst Glasstärke: 2–50 mm Bohrdurchmesser: 3–180 mm Gewicht ohne Rollentisch: 775 kg Anschlussleistung: 2,5 kW Abmessungen ohne Rollentisch: 1,3 x 1,7 x 1,2 m Abmessungen Rollentisch: 5,2 x 2,4 m / Höhe 1050 mm / ±25 mm Maximaler Abstand Maschinenrahmen zu Bohrzentrum:

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Ffedpfefgyicex Aflst Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: rabljeno, Thread diameter M3 - M12 mm Infinitely variable speed 400 rpm Ffedpfsfg U Smsx Aflst Torque 25 Nm Air pressure 6 - 8 bar Working area radius 1000 mm Machine weight approx. 12 kg Demonstration unit! Pneumatically driven tapping machine for M3 - M12 threads, featuring: - Stable and flexible articulating arm. - 6 quick-change chucks with slip clutch. Documentation in English!! Optional: - Clamping table with T-slot mounting surface 900 x 600 mm

Stanje: novo, Leto izdelave: 2022, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 15 m/min, skupna masa: 7.400 kg, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10 obr/min, pomik osi Y: 1.500 mm, moč: 22 kW (29,91 KM), DYAS ploščinsko vrtalno središče - DYAS PDC-1500 Fedpfxjgbfaxe Afleft Število vrtalnih enot: 1 vertikalna Moč motorja: 22 kW Vreteni navor: 280 Nm Hitrost vretena: 10–4000 vrt/min Avtomatska menjava orodja (ATC): 16 pozicij Največja teža obdelovanca: 760 kg Največja vrtalna zmogljivost (mm): Ø40 mm

Stanje: rabljeno, 5tSWF Craning Technology Ltd. Ffsdodc A R Tepfx Aflet

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Ffjdpjfg Rlcofx Aflot Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Leto izdelave: 1972, Stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ffsdpfxsb Tdque Aflet Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Stanje: rabljeno, Tool presetting device EZSET EZ400 Fsdpfxeuhb Ste Aflsft

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I Ffodpfx Afsfg E Hleljt • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice