Muratec Mw 200 nakup rabljenega (18)

Stanje: rabljeno, Leto izdelave: 2003, MURATEC - MW200 (Ref: - odklopljen, vendar ga je mogoče ponovno priklopiti Gedpfoyzh N Nox Anfobl - kompletni stroji z vsemi perifernimi napravami - možen preizkus po dogovoru Na voljo MURATEC: MURATEC - MD120 - 2007 MURATEC - MS60 - 2008 MURATEC - MW200 (Ref: MURATEC - MW120 (Ref: MURATEC - MW120 (Ref: MURATEC - MW120 (Ref: MURATEC - MW120 (Ref: 116) - 2007 MURATEC - MW120 (Ref: 117) - 2007 MURATEC - MW120 (Ref: 118) - 2008 MURATEC - MW120 (Ref: 119) - 2008

Stanje: dober (rabljeno), Leto izdelave: 2012, premer struženja: 200 mm, največja hitrost vretena: 3.500 obr/min, skupna masa: 7.200 kg, zunanji premer vpenjalne glave: 254 mm, Muratec MW200 GT naprodaj Rabljen, v odličnem stanju. Stroj si je možno ogledati po predhodnem dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo z embaliranjem in nakladanjem. Dobava: EXW Székesfehérvár Gedpov I Udzjfx Anfebl

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 [kW] - Spindle speed: 45 - 4,500 [rpm] - Maximum main spindle chuck diameter: 135 [mm] MAIN SPINDLE - Spindle nose: A2-5 Gbedpfx Aeuhadnsnfel - Spindle drive power: 11 [kW] - Spindle speed: 45 - 4,500 [rpm] - Maximum main spindle chuck diameter: 135 [mm] TURRET HEAD 1 - Number of positions: 8 - Travel X/Z: 130 / 145 [mm] TURRET HEAD 2 - Number of positions: 8 - Travel X/Z: 130 / 145 [mm] ELECTRICAL SUPPLY - Supply voltage: 200 [V] - Total connected load: 32 [kVA] WEIGHT AND DIMENSIONS - Space requirements: 3,800 x 1,875 [mm] - Machine height: 2,420 [mm] - Machine weight: 4,600 [kg] MACHINE OPERATING HOURS - Power-on hours: 15,692 [h] EQUIPMENT - CNC control: Fanuc - 3-color status lamp - Coolant tank * with high-pressure pump * with paper filter - Chip conveyor: Gauche - Oil mist extraction system - Parts removal unit - Workpiece loading robot * Maximum main spindle chuck diameter: 165 [mm]

Leto izdelave: 2012, stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Gedpfxeifi D Ts Anfsbl Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Stanje: rabljeno, CNC stružniški avtomat MURATEC MW40 Godpfx Asy Ntm Asnfjbl

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15KX239200001, Caracteristici tehnice: Zonă de lucru # Diametru maxim de strunjire: 210 mm # Diametru maxim de prelucrare: 200 mm # Lungime maximă piesă: 220 mm # Cursă axă X1/X2: 220 mm / Viteză rapidă X: 24 m/min # Cursă axă Z1/Z2: 220/770 mm / Viteză rapidă Z: 36 m/min # Cursă axă Y1/Y2: +/-40 mm / Viteză rapidă Y: 12 m/min Automatizare: # Cursă axe: X – 210 mm; Y – 680 mm; Z – Stânga 2080 mm / Dreapta 3360 mm; α 270˚ # Viteze maxime m/min: X – 35; Y – 120 mm; Z – 160 mm; α 270˚/1,5 sec # Specificații grippere încărcare/descărcare (acționate pneumatic): diametru exterior – Ø170 mm; deschidere fălci 30 mm; forță de strângere: exterior 128 kgf / interior 138 kgf Broșă principală # Dimensiune broșă: A8 # Viteză maximă: stânga 5000 rpm / dreapta 5000 rpm Gbsdpfx Anjxwuhujfel # Putere la 100% ED: stânga – 15 kW / dreapta 7,5 kW # Capacitate bară: broșă stânga – 65 mm / broșă dreapta – nu are Portsculă cu scule motorizate # Interfață scule: BMT55 # Număr poziții: 15 superioare / 12 inferioare – revolver cu poziții integral antrenate # Viteză maximă: 4500 rpm, putere motor frezare: 4,5 kW Echipament electric # Tensiune de alimentare: 200Vx3, siguranță 151A # Putere instalată: 55 kVA Dimensiuni # Dimensiuni utilaj (L×l×H): 3200 × 2200 × 3500 mm # Greutate: 10500 kg Caracteristici principale și capabilități: # Construcție orizontală: Evacuare optimă a șpanului, încărcare/descărcare prin portal de pe benzi transportoare # Automatizare: robot portal + 2 benzi transportoare de încărcare/descărcare # Control CNC: Fanuc FS31i Model A Series # Transportor de evacuare șpan # Filtrare lichid de răcire 40 bari max: Filber S.L. FTH5/10 200 l/min # Control proces: Marposs T25 # Detectare sculă ruptă: Meniu Peek tool, funcție activată Murata/Fanuc # Detectare piesă prin broșă: Manometre aer comprimat joasă presiune # Interfață alimentator bară Ø65 mm max # Documentație: disponibilă electronic / în format tipărit Stare utilaj: FUNCȚIONAL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, največja hitrost vretena: 4.000 obr/min, Premer palice (maks.): 65 mm, število osi: 9, This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It offers a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine features an impressive maximum feed rate of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking for a high-quality lathe, consider the Muratec MT200, which we are offering for sale. Please contact us for more details. • Chuck size: 210 mm (8 inches) • Maximum swing: 205 mm (15 stations) / 228 mm (12 stations) • Maximum bar capacity: 65 mm (standard) / 80 mm (optional) • Turret stations: 15 (upper and right) / 12 (lower) • Bar diameter: 65 mm (standard) / 80 mm (optional) • Axis travel (2 turrets): • Upper turret: X 220 mm, Z 770 mm, Y +/- 40 mm • Lower turret: X 200 mm, Z 770 mm, Y +/- 40 mm • Right spindle (Zs): 880 mm • Maximum feed rate: • X-axis: 24 m/min • Z-axis: 36 m/min • Y-axis: 12 m/min • Driven tool motor: 14.0 kW max (4.8 kW continuous) • Maximum speed of driven tool: 4,500 rpm • Spindle positioning: C-axis control (+/- 0.015 degrees) Additional Equipment • Gantry loader capacity: 140 mm x 105 mm (3 jaws), up to 8.0 kg x 2 (optional) • Parts catcher capacity: 65 mm x 160 mm, 2.5 kg Technical Specification Counter Spindle: Yes Godpfxjyvuxys Anfobl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 9.900 h, MURATEC MD 200G Year of manufacture: 12 / 2004 Gjdpfx Asw E D Tlenfjbl Control unit: Fanuc 18iT Integrated gantry loading system with travels of 2100 mm + 2250 mm Gantry Z-axis travel increased by 100 mm ("Z" axis shift) Gantry with increased load capacity (12+12 kg) Muratec WFL 20-280 workpiece feeding system 2 x Autoblock BH 250 self-centering chucks 2 x servo-controlled 10-position turrets for driven tools Set of static tool holders 2 x radial driven tool holders 2 x axial driven tool holders "C" axes for both spindles with 360,000 continuous positions Coolant + air outlets above left and right spindles "PEL" device on right spindle Belt-type chip conveyor with rear discharge Rigid tapping software TOOL MONITOR software TOOL LIFE MANAGEMENT software CE mark

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 kW - Spindle speed: 45 – 4,500 rpm - Max. diameter of main spindle chuck: 135 mm MAIN SPINDLE - Spindle nose: A2-5 Godpfxeydfuas Anfjbl - Spindle drive power: 11 kW - Spindle speed: 45 – 4,500 rpm - Max. diameter of main spindle chuck: 135 mm TURRET 1 - Number of positions: 8 - Travel X/Z: 130 / 145 mm TURRET 2 - Number of positions: 8 - Travel X/Z: 130 / 145 mm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 32 kVA WEIGHT AND DIMENSIONS - Required floor space: 3,800 x 1,875 mm - Machine height: 2,420 mm - Machine weight: 4,600 kg MACHINE HOURS - Power-on hours: 10,842 h ACCESSORIES - Control: Fanuc - 3-color status light - Coolant tank - Chip conveyor: rear discharge - Part removal - Workpiece loading robot * Max. main spindle chuck diameter: 165 mm

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Turning diameter: 120 mm Gsdey D Nxdspfx Anfebl Turning length: 100 mm Control: Fanuc Main spindle 1 power: 7.5 kW Main spindle 1 speed: 4,500 rpm Main spindle 2 power: 7.5 kW Main spindle 2 speed: 4,500 rpm Distance between spindle noses: 600 mm Turret no. 1 stations / driven: 15/15 Driven tool power, turret 1: 2.7 kW Driven tool speed, turret 1: 4,000 rpm Turret no. 2 stations / driven: 15/15 Driven tool power, turret 2: 2.7 kW Driven tool speed, turret 2: 4,000 rpm Travel paths X/Z, turret 1: 250 / 300 mm Travel paths X/Z, turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm Power chuck: 165 mm Spindle bore spindle 1: 62 mm Spindle bore spindle 2: 62 mm Space requirement approx.: 3700 x 2300 x 3000 mm Machine weight approx.: 5,600 kg Used CNC opposing spindle turning center with gantry loader - 165 mm chuck on both spindles - 2x 15-position turret with driven tools - Automatic workpiece loader with turning station 14-position magazine on the left Maximum part size: Ø 120 x 100 mm Double gripper capacity: 2 x 3 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina jeklene pločevine: 6 mm, Murata Weidemann C 2000 Gbsdpfx Ajtulrfonfol

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17KX216770001, Caractéristiques techniques : Zone de travail # Diamètre maximal de tournage : 230 mm (avec chargeur 120 mm) # Diamètre maximal d’usinage : 200 mm # Longueur maximale de la pièce : 145 mm (avec chargeur 75 mm) # Course des axes X1/X2 : 130 mm / Vitesse rapide en X : 24 m/min # Course des axes Z1/Z2 : 145 mm / Vitesse rapide en Z : 24 m/min # Course des axes Y1/Y2 : +/-40 mm / Vitesse rapide en Y : 12 m/min Automatisation : # Course des axes : X – gauche 200 mm / droite 1600 mm ; Y – 550 mm ; Z – 155 mm ; α 180˚ # Vitesses maximales m/min : X – 160 ; Y – 120 ; Z – 35 ; α 180˚/1 sec # Spécifications des pinces de chargement/déchargement (à air comprimé) : diamètre extérieur Ø90 ; course des mors 30 mm ; force de serrage : extérieur 128 kgf / intérieur 138 kgf Broche principale # Taille de la broche : standard (6 / 8 pouces) / 165 mm / 205 mm # Vitesse maximale : gauche & droite 45-4500 tr/min # Puissance à 100 % du facteur d’utilisation : gauche - 15 kW / droite 7,5 kW Porte-outils avec outils motorisés # Interface outil : BMT55 # Nombre de positions : 12 droite / 12 gauche – tourelle à disques, toutes les positions entraînées # Vitesse maximale : 4000 tr/min, puissance moteur de fraisage : 4,5 kW Équipement électrique # Tension d’alimentation : 200 V triphasé, fusible 151A # Puissance connectée : 31 kVA Dimensions # Dimensions globales (L×l×h) : 3 950 × 2 715 × 2 800 mm # Poids : 4 400 kg Principales caractéristiques et capacités : # Conception horizontale : évacuation optimale des copeaux, chargement/déchargement par portique à partir de convoyeurs # Automatisation composée d’un robot à portique + 2 convoyeurs de chargement/déchargement # Commande CNC : Fanuc FS31i Série Model A # Convoyeur d’extraction des copeaux # Filtration du liquide de refroidissement 40 bars max : filtre Micron, modèle Evotech 500PRO # Refroidissement du liquide : Texa TCW55PMSBCDX00 sn165373 # Contrôle en cours de processus : Marposs T25 # Système de détection d’outil cassé : menu Peek tool, fonction Murata/Fanuc activée # Documentation : disponible en version électronique / version papier Gbodjxxi Ncjpfx Anfel État de la machine : EN FONCTIONNEMENT

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Impianto descritto come da documento allegato Accessori inclusi: - Nr. 2 autocentranti ø 210 mm a 3 griffe - Nr. 2 portautensili motorizzati frontali - Nr. 1 portautensili motorizzato radiale - Nr. 7 portabareni - Nr. 7 portautensili radiali Gsdpfx Aewy Nibonfsbl - Nr. 2 portautensili fissi - Nr. 6 morsetti

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 20 t, skupna masa: 12.000 kg, natančnost ponavljanja: 0,1 mm, CNC Turret Punching Machine MOTORUM-2048TS – New from Showroom ✅ CE Certification Included We are offering a CNC turret punching machine MOTORUM-2048TS, never used in production and in showroom-new condition. Key Features: Standard 44-station turret: Gbsdewx N Tdspfx Anfel 10 x XB, 16 x B, 6 x C, 4 x D, 1 x E, 1 x F, 1 x G, 1 x H (non-index) 1 set of type 114 punch holders for non-index stations Sliding die holders and urethane stripper for non-index stations 3 F-Index stations with dedicated type 114 punch holders Die holders and urethane stripper for each index station 1 standard Varitool-Z punch holder (12 stations), complete with die holder and urethane stripper (punches and dies not included) Additional Specifications: Brush system for sheet protection Material distortion detection during processing Slug suction unit for improved cleanliness Roller tool monitoring function Standard NC memory of 1,280 m Integrated read/write device (LAN, USB, Compact Flash) Technical Specifications: Punching force: 20 Ton Max sheet thickness: 6.35 mm Max sheet size: Without repositioning: 1,250 x 2,500 mm With repositioning: 1,250 x 5,000 mm Number of turret stations: 44 Power supply voltage: 200V, three-phase, 50/60Hz (Note: Step-down transformer for local network adaptation not included) Condition: ✔️ New from showroom ✔️ Ready for delivery

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 4000 mm + 2000 mm podajalnik palic Mere globina 2300 mm Mere višina 2100 mm Teža stroja 10400 kg Gbodpfjx D N I Ajx Anfsl Krmilna enota Znamka FANUC Model 18i Glavni pogon Število vreten 2 Območje hitrosti vretena 40 - 4000 Moč motorja vretena 15 kW Število osi 7 Premikanje Pomik po X-osi 180 mm Pomik po Z-osi 930 mm Revolver Število revolverjev 2 Število orodnih mest 15 Dodatna oprema Podajalnik palic multifeed, maksimalna dolžina palice 1,5 metra. Ta stružnica Muratec MT 25 MC je bila izdelana leta 2001 na Japonskem. Opremljena je s CNC krmilnikom Fanuc 18i in ima 7 osi. Stroj ima hitrost vretena 40-4000 vrt/min. Vrste uporabe Struženje

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, • Muratec MT 25 MYY / Portal Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg portal loader robot for automated part loading and unloading. • 1.5-meter CNC bar loader. • Machine with 9 controlled axes. Godsy A D R Ejpfx Anfjbl • Two twin spindles. • Two turrets. • Each turret with 15 positions, all fully driven. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 Nm. • Driven tool motor: 4 kW. • Spindle nose: A2-6. • Maximum turning diameter: 370 mm. • Maximum turning length: 920 mm. • Bar capacity: 67 mm. • Linear prismatic guides on all axes. • Two Kitagawa 250 mm hydraulic chucks on each spindle. • Separate compartment for finished part inspection. • Automatic finished-part pick-up arm for small components. • Automatic sub-spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load monitoring and tool wear detection. • Part transfer system between spindles with automatic torque control. • Fanuc CNC control. • Fanuc motors, servos, electronics, and controls. • Rapid traverse speed: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Driven tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear-mounted swarf conveyor with hinge belt. • Complete set of static tool holders for turning and boring included. • Complete set of live axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Available for immediate delivery, subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Na voljo so 4 enote tega modela. Godpfxoya D Iqo Anfobl

Stanje: rabljeno, MURATEC WIEDEMANN MOTORUM 2048 CNC REVOLVERSKI PREBIJALEC PROIZVAJALEC: MURATA WIEDEMANN, IZDELANO NA JAPONSKEM MODEL: MOTORUM 2048 KRMILJENJE: FANUC 30i ZASLON NA DOTIK LETO: 2016 KAPACITETA: 20 TON VELIKOST PLOČEVINE (Z ENIM POZICIONIRANJEM): 1250 mm x 2500 mm MAKS. DEBELINA PLOČEVINE: 6,35 mm HOD Y, X: Y-OS: 1360,0 mm X-OS: 2550,0 mm NATANČNOST PREBIJANJA: ±0,1 mm GLOBINA VRATU: 1340,0 mm MAKS. DOVOLJENA TEŽA PLOČEVINE: 150 kg HITROST UDARCEV 1.0T – 25 mm RAZMAK, 8,3 mm hod: 355 HPM 0,5 mm RAZMAK, 1,4 mm hod: 900 HPM HITROST SOČASNIH OSI: 125 m/min NATANČNOST PREBIJANJA: ±0,1 mm HITROST INDEKSIRANJA REVOLVERJA: 35 vrt/min STISNJEN ZRAK – KOLIČINA: 100 NL/min PRITISK: 0,5 MPa NAPAJANJE: 19 kVA DODANO: KOMPLET DOBREGA ORODJA Gbedpfx Ansxvch Tsfel EN LASTNIK OD NOVEGA ZELO MALO UR VARNOSTNE OGRAJE