Motorne nakup rabljenega (226)

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing Fgsdpfxeynmzpj Abtsc 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Fedpsynmyfjfx Abtegc Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Fjdpfx Abjynmx Istogc Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Širina lima 2550 mm Debljina lima 10,0 mm ST Savijanje 8,0 mm ST Prečnik gornjeg valjka ~ 205 mm Prečnik bočnih valjaka ~ 195 mm Upravljanje konv. Zapremina ulja 80,0 litara Napon 380 V Fedpfx Abey Ez A Rotjgc Ukupna snaga 7,5 kW Težina 4500 kg Dimenzije D-Š-V 5000 x 1500 x 1300 mm Oprema: - robustna elektro-hidraulična mašina za kružno savijanje sa 3 valjka - koncept sa 3 valjka omogućava raznovrsne mogućnosti savijanja i kruženja - upravljačka jedinica na preklop, napred * upravljanje – kontrola svih valjaka, odnosno osa mašine * digitalni prikaz pozicije * ručno upravljanje preko JOY-stick-ova - mogući prečnici do 1,1 puta od prečnika gornjeg valjka - kovani i kaljeni valjci sa tvrdoćom 53-55 HRC - mašina sa malo održavanja i stabilnom konstrukcijom - čvrsta čelična varena konstrukcija - elektro-hidrauličko klap-ležište za lako vađenje cevi - manometar / prikaz pritiska za valjke - sigurnosni uređaj (sigurnosno uže sa sklopkom) - uputstvo za rad (PDF)

Stanje: pripravljen za uporabo (rabljen), 1 x Davi stroj za krivljenje pločevine / valjčna stiskalnica / štirivaljni stroj za železo (angl. Davi 4 roller bending machine) . Video na voljo preko Whatsapp/Messenger/Viber . Ogled dobrodošel v bližini D-24983 Handewitt . Več informacij ob resnem interesu Fgjdoymnzbjpfx Abtec

Stanje: rabljeno, Leto izdelave: 1989, Schäfer SVRM 3500/12 – CNC-4-Walzen-Biegemaschine Fgsdpfx Aeylyh Dsbtec - Siemens CNC-Steuerung mit Joystick für die Walzenpositionierung und Digitalanzeige (erneuert 2006) - Hydraulisches Kippen der Oberwalze per Steuerpult - Walzen aus vergütetem Material mit 900 N/mm² Festigkeit - Baujahr 1989 Technische Daten - Max. Blechbreite: 3500 mm - Ballenlänge der Walzen: 3550 mm - Max. Blechstärke Biegen: 12 mm - Max. Blechstärke Anbiegen 4xS/3xS: 8 / 6 mm - Max. Steckgrenze der Bleche bei 20% Kaltverfestigung: 380 N/mm² - Ober- & Unterwalzendurchmesser: 360 mm - Seitenwalzendurchmesser: 290 mm - Kleinster zu erzielender Radius: 220 mm - Zustellgeschwindigkeit Unterwalze: 200 mm/min - Zustellgeschwindigkeit Seitenwalzen: 700 mm/min - Gesamte installierte Leistung: 22 kW - Elektr. Steuerung: 380 V / 50 Hz / 3 Ph - Raumbedarf inkl. Steuerung, Hydraulik & Rollenbahn BxHxT: ca. 7900 x 3300 x 4600 mm - Unterflur: 900 mm - Maschinengewicht: 21100 kg

Stanje: novo, Leto izdelave: 2026, število valjev: 3, premer spodnjega valja: 190 mm, premer zgornjega valja: 190 mm, premer stranskega valja: 190 mm, delovna širina: 1.550 mm, najv. debelina jeklene pločevine: 9 mm, število digitalnih zaslonov: 2, Oprema: kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, – Kapaciteta 1550 x 9 mm – Električno nastavljiv zadnji valj – Električno nastavljiv spodnji valj (prijem materiala) – Digitalni prikaz za premik zadnjega valja – Digitalni prikaz za premik spodnjega valja (prijem materiala) – Kaljeni valji – Konusno valjanje – Izvlečni zgornji valj – Zaviralni motor – Nujna zaustavitev Fodpfx Abjy Rh H Tetegc – Dokumentacija – 400V

Stanje: rabljeno, Leto izdelave: 1986, Širina pločevine 2040 mm Debelina pločevine 4,0 mm Razmik med stojali 2100 mm Fedpjy Ezzyefx Abtegc Premer valjev 150 mm Skupna potrebna moč 7,0 kW Teža stroja cca 2,2 t Potrebni prostor cca 2,95 x 1,0 x 1,75 mm Stroj za ukrivljanje pločevine s 3 valji - 2 pogonska valja - zadnji valj električno nastavljiv - konično ukrivljanje - nožno stikalo - naprava za izklop v sili

Stanje: novo, Very robust motorized 3-roll bending machine Weight: 450 kg Equipped with hardened rollers Roller hardness: HRC 28-32 Max. sheet thickness ----- 1.5 mm Max. working width ----- 1300 mm Fgedpfx Asrvi Tpjbtec Roller diameter ----- 75 mm Motor power ----- 1.5 kW Rolling speed ----- 6 m/min INCLUDES Foot pedal with emergency stop

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Fedpfx Aov Htniobtjgc Pre-bending: 20.0 mm CNC control Top roll diameter: 320 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Hardened rolls Conical bending device via inclined positioning of both side rolls Mobile control panel with digital display Motor power: 11 kW CE marking Dimensions (L x W x H): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 t The seller is not liable for typing or data transmission errors. The machine's visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: rabljeno, Leto izdelave: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Bending capacity: 8.0 mm (steel) Top roller diameter: approx. 205 mm Side roller diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept enables a wide range of bending and rounding operations - Swiveling control unit at the front * Operation and control of all rollers and machine axes * Digital position display * Manual operation via joysticks - Bending diameters of up to 1.1 times the top roller diameter possible - Forged and hardened rolls with a strength of 53-55 HRC Fgjdpexacdvjfx Abtec - Low-maintenance, stable machine design - Heavy-duty steel welded construction - Electro-hydraulic drop-end for easy removal of rolled pipes - Manometer / pressure gauge for the rolls - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Four-Roll Plate Bending Machine Make: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Technical specifications Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Lower roll diameter: 210 mm Side rolls diameter: 165 mm Bending force (against top roll): 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4.2 t Performance Data Rolling capacity (full width) mm: 12 Pre-bending capacity (full width) mm: 8 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 260 Fedjy Atwbspfx Abtogc Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 360 Rolling capacity (full width) mm: 6.5 Pre-bending capacity (full width) mm: 5 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 360 Rolling capacity (half width) mm: 15 Pre-bending capacity (half width) mm: 10 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Equipment - Double linear guide system for roll movement - Extra-wide bearing blocks - MCS dual-bearing system for roll rotation - Extra heavy, double-supported swing-out end bearing - Electronic parallelism system EPS - Hardened rolls for high wear resistance and minimal sheet marking - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop function, CE certified - Water cooler for the hydraulic unit All information subject to change. A powered demonstration is available anytime in our showroom.

Stanje: rabljeno, Naprodaj sta GSW odvijalnik in GSW ravnalni stroj. Oba stroja sta v dobrem rabljenem stanju (pri odvijalniku je okvara motorne zavore). Odvijalnik: GSW Serijska številka: AHM 1000 433 Nosilnost: 1000 kg Maks. premer role: 720 mm Z podaljškom roke: 1120 mm Napaka: motorna zavora (odstopanje tolerance) Cena: 3.500 € po dogovoru Ravnalni stroj GSW: Serijska številka: RMA 32 / 114 Maks. širina pločevine: 290 mm Cena: 3.500 € po dogovoru Fodpfoyxbmpsx Abtjgc Na zahtevo vam z veseljem posredujemo več informacij in podatkov o strojih.

Stanje: rabljeno, max. working width: 1100 mm for sheet thickness (steel sheet) up to approx.: 1 mm Fedpecaxvhefx Abtogc electric drive: 380 V, 0.75 kW space requirement: 2330 x 600 x 1140 mm weight: 357 kg

Stanje: novo, Sheet thickness: 10 mm Bending length: 4100 mm Top roll diameter: 330 mm Fgsdpfx Abod Ab Ryjtoc Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated top cover for easy removal of material - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movements of the lower roll are hydraulically driven - Mobile control console - In compliance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 10,250 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Priključni kabelski set 7 m za upravljanje KRC4 Kuka robot Quantec-2 KR120 do KR210. Set vsebuje motorne in podatkovne kable. Kabelski set povezuje krmilno omaro z robotom KUKA. Fgedpfx Aexdxc Nebtoc

Stanje: novo, Dolžina pločevine: 3100 Debelina pločevine: 13 Upogibanje: 10 Skupna potrebna moč: 15 Teža približno: 10 Dimenzije (DxŠxV): 4,88x1,16x1,18 Slika podobna Premer valja (zgoraj/spodaj): Ø270 mm Dolžina upogibanja: 3.100 mm Največja debelina pločevine za običajno upogibanje: 13 mm Največja debelina pločevine za pred-upogibanje: 10 mm Pred-upogibanje / Upogibanje: 8 mm / 10 mm (glede na polmer Ød × 1,5) Fedpfjd Ab H Ejx Abtegc CE-standard Spremenljiva hitrost Krmilna enota – 7-palčni zaslon na dotik Stožčasto upogibanje Induktivno kaljeni valji Pozicioniranje stranskih valjev preko elektronsko sinhroniziranega PLC Spodnji valj trdno mehansko sinhroniziran Varnostni mehanizem za varjenje na stroju Ograja za sprostitev napetosti iz jeklene konstrukcije Ležajni valji Hidravlično odpiranje zgornjega valja Zgornji in spodnji valji poganjani s hidravličnim motorjem in planetnim menjalnikom Električna in hidravlična zaščita pred preobremenitvijo Hidravlično nastavljiv pritisk spodnjih valjev

Stanje: novo, Sheet thickness: 8 mm Bending length: 3100 mm Top roll diameter: 230 mm Technical data: - Maximum sheet thickness: 8 mm (5/16“) - Pre-bending capacity: 6 mm (1/4“) - Minimum bending diameter (with top roll diameter = TRD): TRD × 3 - Working length: 3,100 mm (10 ft) - Motor power: 7.5 kW (10.1 HP) - Number of rolls: 4 Roll dimensions: - Top roll diameter: 230 mm (9.1“) - Lower roll diameter: 210 mm (8.3“) - Side roll diameter: 190 mm (7.5“) Machine dimensions: - Length: 5,200 mm (17.1 ft) - Height: 1,300 mm (4.3 ft) - Width: 1,400 mm (4.6 ft) Fgjdpfx Aod Ab Saobtjc - Weight: 5,830 kg (12,853 lbs) Features: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4-roll symmetrical design - Hydraulically driven cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and lower rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically operated - Mobile control panel - CE compliant Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roller opening head Movable control panel Centrally driven rollers powered by motor Hydraulically movable rear roller and lower roller (up/down) Accurate bending with braked main motor Conical bending and pre-bending system Lower and upper rollers driven by planetary gearbox Rear roller ball system for easier sheet movement Fsdpfxow Slctj Abtjgc Compliance with EU safety directives High-strength forged steel rollers made of SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 pcs) User manual OPTIONAL EQUIPMENT Overhead crane for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rollers Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375/1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Fodpjw Slxzjfx Abtjgc Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Fjdpfx Abew Slcgstegc Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, skupna masa: 5.400 kg, STANDARD EQUIPMENT Steel construction main frames Fjdew Slbvspfx Abtogc Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up-down movement for rear and lower rolls Precision bending with braked main motor Conical and pre-bending system Lower and upper roll drive via planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 lt Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet, aluminum, or stainless steel materials Ideal for bending round and various diameter materials Lower and side rolls move vertically by direct hydraulic linear movement Protected against overloading The upper roll is driven by an electric motor and planetary reducer. The lower roll is powered via a cardan coupling system. Two rolls have powered rotation Positions of the rolls can be easily read via three digital displays Fgodpfjw Slkkjx Abtoc The hydraulically opening head allows easy removal of the bent part Very easy operation with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel shaft movement Complies with EU safety standards and is CE marked Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Dual speed adjustment system Stepless speed adjustment Hydromotor driven rotation Ejector system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Stanje: rabljeno, skupna dolžina: 6.500 mm, skupna širina: 2.400 mm, skupna višina: 2.000 mm, Net weight: 23,000 kg Plate Rolling Machine / Sheet Metal Bending Roll Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working length: 4,100 mm Max. sheet thickness: 6 mm (stainless steel) - 14 mm (aluminum) Top roller diameter: 350 mm Other roller diameters: 250 mm Included: Cone bending attachment Included: Hydraulic return assist Machine weight: 23,000 kg Videos available prior to dismantling Fgjdjx U Dmwspfx Abtsc - Documentation available: No - CE certificate available: No - Control: Conventional - Drive: Hydraulic - Number of rollers: 4 - Number of driven rollers: 4 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4,100 - Top roller diameter [mm]: 350 - Lower roller diameter [mm]: 250 - Options: Sheet support, cone bending - Deals (actions): special deal - Transport dimensions: 6,500 mm x 2,400 mm x 2,000 mm (L x W x H) - Transport weight [kg]: 23,000 kg - Transport packages [pcs.]: 1 Financial information: VAT: The quoted price is exclusive of VAT VAT/margin taxation: VAT is deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Lukas van Rossum

Stanje: novo, Bending length: 2600 mm Sheet thickness: 7 mm Top roller diameter: 200 mm Technical data: - Back roller motorized - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes within the transmission - Portable control panel Fgodpfjd Ab Ngox Abtec - In compliance with CE standards Options: - Bottom roller driven by electric motor: EURO 2,200 - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!