Minarctig Evo nakup rabljenega (35.204)

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, DMG MORI DMU 60 Evo 5-Axis Simultaneous Machining Centre (2014) Manufacturer: DMG Mori Model: DMU 60 Evo 5-axis simultaneous Year of manufacture: 2014 Condition: Good, used; new spindle installed in 2024 Power-on hours: 37,063 h Spindle hours: 21,313 h Control unit: Heidenhain ITNC 530 Condition: Used, fully operational Travel paths X/Y/Z: 600/500/500 mm Rapid traverse: 80 m/min Spindle speed: 20–14,000 rpm Tool magazine: 30 positions Tool holder: SK40 NC rotary tilt table: 600 x 500 mm Internal coolant supply: 40 bar, with band filter system Measuring probe: TS649 Documentation included Itodewp Ic Espfx Ah Asr

Stanje: novo, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual mode, featuring MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: • New centralized control console on an articulated arm for easy operation from any working position. • Low-voltage operating panel: – Polyester membrane keypad with thermoformed, raised pushbuttons and status indicator signal. – Display for: * Diagnostics (user language messages) * Alarms (alarm cause descriptions) * Input/output status * Cut count * Time used for each cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position. • IP55 manual cycle lever (24 V). Iedpfxecgbq Ij Ah Aetr • Complete range of special cutting cycles. • Capability for defining further special cycles for specific applications. • New-generation, highly efficient, low-energy hydraulic control unit. • Large working table with turntable on roller bearing (265 mm), mounted with preloaded thrust bearing. • Dual blade speed (36/72 m/min) with control. • Designed to accept frequency inverter for infinitively variable blade speed from 20 to 90 m/min. • Bow stroke programmable directly from control panel to adapt to the material. • Clamping device laterally adjustable left and right, with quick-release vice. • Manual blade tension control with electronic converter and on-screen display. • Base frame with pull-out coolant tray. • Electric coolant pump for blade cooling and lubrication. • Prepared for installation of minimum-quantity lubrication system for blade (optional), in addition to standard coolant lubrication with emulsified oil. • Chip removal brush. • Machine suitable for pallet truck transportation. • Length stop for repetitive cuts. • Material support arm with roller, suitable for mounting loading table. • Bimetallic bandsaw blade for solid and profile materials. • Tools and user manual included in user’s language. For further technical data, please refer to the attached PDF document.

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Professional mobile filtration unit for welding fume extraction with high-performance extraction arm Suitable for welding processes: MMA, MIG, MAG, TIG, Plasma Cutting Extraction capacity max. 2,500 m³/h Extraction arm length: 3 m Motor power: 1.1 kW Connection voltage: 230 V / 50 Hz Sound pressure level approx. 73 dB(A) Filter area approx. 14 m² Powder-coated steel housing with wheels and handles. Digital control panel with alarm log, operating hours counter, and filter monitoring. Itsdpfx Aevnzwzeh Aor The electronic circuit board is housed separately and protected from the airflow. High-performance fan located downstream of the filters in a dedicated sound-insulated compartment. Spark protection filter installed as standard. On request, a set of activated carbon filters (10 kg) can be installed, which is particularly required for SOV/VOC, stainless steel, and galvanized steel applications.

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90°: round 115 mm Cutting capacity at 45°: round 110 mm Cutting capacity at 60°: round 90.0 mm Cutting capacity at 90°: square 95 x 95 mm Cutting capacity at 45°: square 95 x 95 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 90°: flat 180 x 95 mm Cutting capacity at 45°: flat 125 x 95 mm Cutting capacity at 60°: flat 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Control system: MEP NC Total power requirement: 1.8 / 2.5 kW Weight: 410 kg Dimensions (L x W x H): 2050 x 1050 x 1120 mm Equipment / Description: - NC electro-pneumatic semi-automatic (INDUSTRIAL) * suitable for cuts from 45° right to 60° left - MEP NC control with soft-touch keyboard * backlit display Iodpfoxabd Ijx Ah Aetr - Saw head guided on preloaded linear guides on a robust cast steel column - Powerful 2-speed gearbox designed specifically for solid material cutting - Four blade rotation speeds available for optimal adaptation to the material - Large, ball-bearing rotary table with internal table clamping & precision stops at 0/45/60° for fast adjustment for miter cuts - Pneumatic vice equipped with bolted jaws, providing optimum workpiece clamping thanks to the ribbed surface - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Comprehensive operating instructions, maintenance manual - Wiring diagrams and exploded drawings - Lifting eyes for transport * Machine is supplied without saw blade

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 4.688 h, nosilnost: 1.600 kg, dvižna višina: 4.625 mm, prosto dvigovanje: 1.519 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.121 mm, vrsta prenosa: hidrostat, kapaciteta baterije: 500 Ah, napetost baterije: 48 V, Tip prednje pnevmatike: polne pnevmatike (ne puščajo sledi), tip zadnje pnevmatike: polne pnevmatike (ne puščajo sledi), Oprema: CE označba, bočni pomik, osvetlitev, popolna servisna zgodovina, vilice za palete, For Sale: Linde E16C-02 EVO Electric Forklift with 1600kg Lifting Capacity Are you looking for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium, offers a well-maintained Linde E16C-02 EVO, built in 2017 with only 4688 operating hours. This forklift is equipped with high-quality specifications designed to optimize your internal logistics. Key Specifications: - Lifting height: 4625 mm - Overall height: 2121 mm - Free lift height: 1519 mm - Load capacity: 1600 kg - Integral sideshift: Allows for precise and flexible handling of various loads. - Tyres: Fitted with four brand new Trelleborg XP800 Non-Marking tyres - Controls: Equipped with a single pedal for intuitive and efficient operation. - Accessories: Work lights, an orange beacon, blue spot, and red side lights for enhanced visibility and safety. - Charger included: Delivered with a matching charger so you can operate immediately. Advantages of the Linde E16C-02: - Excellent Maneuverability: Thanks to its compact design and innovative Linde combi-steer axle, this four-wheel forklift is perfect for use in narrow aisles, offering minimal tire wear and preventing floor damage. - Ergonomic Design: The spacious cabin and intuitive controls—such as Linde Load Control and the twin-pedal system—ensure a comfortable working environment and increased productivity. - Reliable Performance: Powerful AC motors and the Linde Load Control system deliver precise and efficient load handling. Iedexmhvqepfx Ah Aetr - Low Maintenance Costs: Maintenance-free components such as the AC motors and wet disc brakes minimize downtime and reduce maintenance expenses. This Linde E16C-02 is immediately available at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and experience how it can elevate your business operations. Interested? Contact 2Bro-Trading B.V. today to schedule a viewing!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control, Excellent Condition Technical Data: >> Year of manufacture: 2006 >> Heidenhain controller, type iTNC 530 >> Travel ranges X500/Y450/Z400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feedrate infinitely programmable up to X, Y, Z 20,000 mm/min C/B axis infinitely programmable up to rapid traverse speed >> Rapid traverse Y-Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 magazine positions >> Table clamping surface Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Heidenhain electronic handwheel HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> Through-spindle coolant (IKZ) 40 bar >> Coolant filtration system (fleece filter unit) >> Rinse gun >> Visiport >> Sealing air on measuring system >> Prepared for robotic loading >> Heidenhain 3D probe TS640 >> 3D Quick Set >> Kinematics Itedpfjvyr Tdjx Ah Asr >> Blum laser for tool measurement and tool breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all coolant and pneumatic hoses replaced, new filters, fluids, and belts replaced. Scrapers etc. fully cleaned. >> Geometric inspection (acceptance report available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection report has been prepared. You are welcome to view and test the machine under power at our premises.

Stanje: dober (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Einseitige Kantenanleimmaschine zum Verleimen von Kantenband mit Schmelzkleber an allen 4 Seiten eines rechteckigen Paneels, einschließlich Nachbearbeitung des Kantenbands. Itedpfx Ahsxpgxvs Aor

Stanje: novo, MEP COBRA 352 SX evo [Semi-Automatic] Article number: CB352SX Motor power: 1.5/2.2 kW Vice opening: 180 mm Blade dimensions: 350x32x3.4 mm Weight: 285 kg Speed: 1700 / 3400 rpm Cutting capacity at 0°: 120 / 105 / 180x70 mm Cutting capacity at 45° right: 120 / 100 / 135x60 mm Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Itodechkv Ijpfx Ah Aor Description Semi-automatic circular saw designed for cutting solid and hollow aluminium materials and light metal alloys using an electro-welded carbide-tipped blade. Standard features: - Machine suitable for mitre cuts from 45° right to 45° left. - The vertical alignment allows for cutting operations with the head tilted between 0° and 45° to the left. - *MEP offers the latest generation of microprocessor-based controls designed for semi-automatic machines with single-axis control. - FEATURES: At cycle start: – the vice closes and the motor starts – the saw head lowers for cutting – the motor stops – the saw head lifts – the vice opens. - New – Display with 16 characters x 2 lines showing the following technical parameters: + Number of cuts performed + Cutting time + Ammeter + Display of over 100 diagnostic notifications and warnings - New – Indication and logging of alarms and error messages with the ability to review incidents that occurred. Electrical equipment: - New – Low-voltage switch panel: polyester membrane keyboard with thermoformed and raised buttons and activation control signal. - Saw bow stroke fully programmable from the control panel to be adapted to the workpiece. - Ball-bearing rotary table ensures smooth and precise rotation. - Clamping system using two face-mounted vices, which can be positioned along the longitudinal axis of the workpieces. - Adjustable mechanical stops for quick head positioning at 0° and 45° right and left. - Chip conveyor ready for OPTIONAL extraction system. - Automatic blade lubrication system, only active at the beginning of the cut. - Machine is supplied without saw blade. - Prepared for installation of the optional minimum-quantity lubrication system for the saw blade, in addition to the standard emulsified oil lubrication system. - Supplied with tools and instruction manual including spare parts list. For further technical data, please refer to the attached PDF document. Catalogue page 2!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 12.878 h, nosilnost: 1.600 kg, dvižna višina: 4.625 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.150 mm, dolžina vilic: 1.200 mm, Oprema: bočni pomik, Trojmast s plným volným zdvihem, stavební výška: 2 150 mm, zdvih: 4 625 mm, zařízení pro nastavování rozchodu vidlic s integrovaným bočním posuvem, dvojité přídavné hydrauliky, hadice vedeny až k nosiči vidlic, délka vidlic: 1 200 mm, LED pracovní světlomety vpředu i vzadu, modré výstražné světlo, ruční ovládání s monopedálem, baterie 48V/625Ah z roku 2018, nabíječka 48V/100Ah, pneumatiky SE, obslužná příručka součástí. Technický stav při prodeji: Vysokozdvižný vozík technicky repasovaný! Právě provedena velká údržba! Nová revize UVV bez závad! Vysokozdvižný vozík nově nalakovaný! Dodání ve bezvadném stavu! 20 let odborných zkušeností! PROHLÍDKA A ZKUŠENÍ JÍZDA: Itodpow Epl Hofx Ah Aer Po dohodě kdykoliv během otevírací doby: Pondělí až pátek 8:00 - 18:00 hod. Sobota 8:00 - 13:00 hod. DOPRAVA: Nákladní nízkoložný přívěs nebo plachtový vůz k dispozici za výhodnou cenu.

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90°: flat 510 x 320 mm Cutting capacity at 90°: square 320 x 320 mm Cutting capacity at 45°: flat 350 x 320 mm Cutting capacity at 45°: round 320 mm Cutting capacity at 45°: square 300 x 300 mm Cutting capacity at 60°: flat 230 x 310 mm Cutting capacity at 60°: square 200 x 200 mm Cutting capacity at 60°: round 200 mm Speed range: 15 - 100 m/min Saw band dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Suitable for mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Rotatable, located at front right - Optional manual or automatic lowering of the saw bow * Infinitely variable saw bow descent adjustment - Carbide blade guides - Hydraulic blade tensioning – including digital value display - 2x blade speeds - 1x Bi-metal saw band - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functions: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow Itjdpfsxaa Tzox Ah Aor - Electro-hydraulic opening of the vice

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 3.146 h, nosilnost: 1.400 kg, dvižna višina: 4.100 mm, prosto dvigovanje: 1.343 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 1.946 mm, kapaciteta baterije: 500 Ah, napetost baterije: 48 V, Tip prednje pnevmatike: polne pnevmatike (ne puščajo sledi), tip zadnje pnevmatike: polne pnevmatike (ne puščajo sledi), Oprema: CE označba, bočni pomik, hidravlika prijemala, osvetlitev, vilice za palete, For Sale: Linde E14-02 EVO Electric Forklift with 1,400 kg Lifting Capacity Are you looking for a reliable and efficient electric forklift for your operations? 2Bro-Trading B.V. in Mol, Belgium, is offering a well-maintained Linde E14-02 EVO, built in 2017 and with only 3,146 operating hours. This forklift is equipped with high-quality specifications that will optimize your internal logistics processes. Key Specifications: • Lifting height: 4,100 mm • Overall height: 1,946 mm • Free lift height: 1,343 mm • Load capacity: 1,400 kg • Independent sideshift: Enables precise and flexible handling of various loads. • Tyres: Equipped with four excellent Continental solid tyres • Controls: Single pedal operation for intuitive and efficient handling. • Accessories: Work lights, orange beacon, bluespot, and red side lighting for enhanced visibility and safety. • Integrated charger included: Allowing for flexible charging at different locations! Advantages of the Linde E16P-02: • Outstanding Maneuverability: Thanks to its compact design and the innovative Linde combi axle, this four-wheel forklift is perfect for use in narrow aisles, with minimal tire wear and no floor damage. • Ergonomic Design: The spacious cabin and intuitive controls, such as the Linde Load Control and twin pedal system, ensure a comfortable working environment, enhancing productivity. • Reliable Performance: The powerful AC motors and Linde Load Control system deliver precise and efficient load handling. • Low Maintenance Costs: Maintenance-free components, such as the AC motors and wet disc brakes, minimize downtime and reduce maintenance costs. This Linde E15-02 is available immediately at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and experience how it can enhance your operations. Interested? Contact 2Bro-Trading B.V. today to schedule a viewing! Iodpfoxmgabsx Ah Ajtr

Stanje: rabljeno, prevoženi kilometri: 380.106 km, moč: 368 kW (500,34 KM), prva registracija: 08/2019, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 09/2024, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, BrakeMatic, ESS (Elektronisches Stabilitätsprogramm), EBA2 (Erweiterter Notbremsassistent), LGS (Spurhalteassistent), Xenon headlights, automatic lighting control, air-conditioned driver's seat, leather interior trim, fully retractable refrigerator under the sleeper bunk, storage compartment on cab rear wall with gooseneck lamp, control module, alarm clock and charging station, 7" radio with DAB+ and MAN sound system, retractable TV, fitted wardrobe, removable TV lounger, roof spotlight set, stainless steel side rails and steps, fifth wheel coupling Jost JSK 42 with 150mm mounting height, 585mm kingpin setting, Jost 40mm fifth wheel plate. Itodpfx Aov Ndq Toh Ajr

Stanje: rabljeno, Leto izdelave: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN Control MillPlus iT Clamping table surface ø 500 x 380 mm B-axis 0 - 161.955° C-axis 360° Spindle taper SK 40 Spindle speeds 20 - 18,000 rpm Max. spindle power 35 kW Max. torque at spindle 130 Nm Infinitely variable feeds up to 20,000 mm/min Rapid traverse X/Y/Z-axis 80 / 50 / 50 m/min Rapid traverse B-axis 40 rpm Itodjwlvi Eepfx Ah Aor C-axis rapid traverse 50 rpm Number of tool magazine positions 30 Tool diameter with 2 free adjacent positions 130 mm Tool diameter when fully equipped 80 mm Max. tool length 300 mm Max. tool weight 6 kg Internal coolant supply 40 bar Total power requirement 52 kVA Machine weight approx. 6 t = 5-axis machining centre with 2-axis NC swivelling rotary table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA VRTLJIVA MIZA ZA OVITJE PALET S RAZTEGLJIVO FOLIJO Ovijalec palet s prednapenjanjem filma, od zastopnika Noxon iz Združenega kraljestva (Robopac je proizveden pri istem podjetju) Hitrost vozička gor-dol Zgornji in spodnji ojačitveni ovoji Napetost folije Hitrost vrtenja mize Ergonomska ustavitev vozička na koncu cikla Cikel gor-dol Isdpfexwa Iyjx Ah Ajtr Samo cikel gor Ročni cikel Samoučeči cikel Višinomer in zakasnitev fotocelice DDV se doda končni ceni Nakladalna rampa na voljo za £250 + DDV Dostava v radiju 200 milj na voljo za £225 + DDV

Stanje: novo, Leto izdelave: 2024, obratovalni tlak: 140 letvica, skupna dolžina: 800 mm, skupna višina: 1.700 mm, skupna širina: 1.000 mm, kapaciteta rezervoarja za vodo: 95 l, moč: 3 kW (4,08 KM), temperatura: 45 °C, TurboClean Evo II to profesjonalna myjka wysokociśnieniowa wykonana ze stali nierdzewnej. Proces mycia odbywa się w obiegu zamkniętym przy użyciu wody ze specjalnym detergentem o maksymalnej temperaturze 45°C. Ciśnienie robocze wynosi 140 bar, dzięki czemu możliwe jest dokładne czyszczenie trudno dostępnych miejsc oraz silnie zabrudzonych elementów, takich jak osady węglowe, tłuszcz czy olej. Klapa wyposażona jest w napędy pneumatyczne, co zwiększa bezpieczeństwo oraz jakość pracy myjki. Urządzenie posiada także separator oleju (skimmer), szczotkę oraz pistolet powietrzny. Na oknie zamontowane są dysze myjące, które poprawiają widoczność i wygodę obsługi. Itjdpfjq Ru Amjx Ah Aor To idealne rozwiązanie dla warsztatów oraz firm zajmujących się regeneracją części. Wyprodukowana w Polsce.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Itjdpfx Aexaa S Rjh Aer Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 4.243 h, nosilnost: 1.600 kg, dvižna višina: 6.625 mm, prosto dvigovanje: 2.369 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.968 mm, vrsta prenosa: hidrostat, kapaciteta baterije: 500 Ah, napetost baterije: 48 V, Certificirano po DGUV do: 10/2026, stanje pnevmatik: 90 odstotek, Oprema: CE označba, bočni pomik, osvetlitev, vilice za palete, For Sale: Linde E16-02 EVO Electric Forklift with 1600kg Lifting Capacity Are you looking for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium, offers a well-maintained Linde E16-02 EVO, built in 2018 with 4243 operating hours. This forklift comes equipped with high-quality specifications to optimize your internal logistics processes. Key Specifications: Lifting height: 6625 mm Overall height: 2968 mm Free lift: 2369 mm Load capacity: 1600 kg Separate sideshift: Enables precise and flexible handling of various loads. Tyres: Fitted with four high-quality solid tyres Ijdpfxexmf T Te Ah Aotr Operation: Equipped with a single foot pedal for intuitive and efficient control. Accessories: Work lights and an orange beacon, bluespot, and red side lighting for improved visibility and safety. Charger included: Supplied with a matching charger, so you're ready to go immediately. Advantages of the Linde E16-02: Excellent Maneuverability: Thanks to its compact design and innovative Linde combi axle, this four-wheel forklift is perfectly suited for use in narrow aisles, with minimal tyre wear and no floor damage. Ergonomic Design: The spacious cabin and intuitive controls, such as Linde Load Control and the twin-pedal system, ensure a comfortable working environment, boosting productivity. Reliable Performance: The powerful AC motors and Linde Load Control system provide precise and efficient load handling. Low Maintenance Costs: Maintenance-free components such as AC motors and wet disc brakes minimize downtime and maintenance expenses. This Linde E16-02 is immediately available at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and experience how it can enhance your business processes. Interested? Contact 2Bro-Trading B.V. today and schedule a viewing!

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Iodpefg E Iaefx Ah Aotr Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Saw blade diameter: 350 x 32 mm Ijdpfxexaa Hns Ah Ajtr Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100x100 / 95x95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed: 1700 / 3400 rpm Controller: MEP NC Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 290 kg Dimensions (L x W x H): 1240 x 1360 x 1800 mm Features: - NC semi-automatic high-performance circular saw * for cuts from 45° right to 45° left * suitable for aluminium and light metal alloys - MEP microprocessor control * user-friendly interface with display and mechanical buttons * saw head start and end positions can be stored - Manually operated safety guard - Mechanical stops at -45°, +0°, +45° * enable rapid positioning of the saw head - Pneumatic quick-release vice * pneumatic clamping system allows adjustment of clamping pressure * pressure depends on the hardness of material being cut * optional pneumatic vertical vice available - Heavy cast iron construction ensures vibration-free operation and high precision - Saw head can be tilted up to 45° additionally - 2 saw blade speeds - Machine base with lockable door - Pneumatic coolant-lubrication system - Machine base Scope of delivery: - Adjustable length stop, 600 mm - Tool kit - Adapter for feed roller conveyor, incl. 1 support roller - Tool kit - Comprehensive operating instructions, maintenance manual, etc. - Machine is supplied without saw blade!

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Ijdsfg E Ibopfx Ah Aotr Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Cutting capacity at 45 degrees, flat: 300 x 200 mm Cutting capacity at 45 degrees, round: 260 mm Cutting capacity at 45 degrees, square: 250 x 250 mm Cutting capacity at 60 degrees, flat: 200 x 170 mm Cutting capacity at 60 degrees, square: 170 x 170 mm Cutting capacity at 60 degrees, round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Space requirement approx. 1647 x 2157 mm Weight: 720 kg Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotating table - MEP EVO microprocessor control for monitoring all machine functions * Swivels, mounted front right - Optional manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering speed - Carbide blade guides - Hydraulic blade tensioning, incl. digital value display - 2 blade speeds - 1 BI-Metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow Itsdpfx Aoxaax Dsh Asr - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter: 300 mm Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Cutting range at 45 degrees, flat: 270 x 200 mm Cutting range at 45 degrees, round: 260 mm Cutting range at 45 degrees, square: 250 x 250 mm Iedsxaav Ajpfx Ah Aetr Cutting range at 60 degrees, flat: 170 x 170 mm Cutting range at 60 degrees, square: 170 x 170 mm Cutting range at 60 degrees, round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Heavy-duty electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted at the front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable bow-feed rate adjustment - Carbide blade guides - Hydraulic blade tensioning incl. digital value display - 2 blade speeds - 1 bi-metal band saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivel-mounted, front right - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw band guide with carbide plates - Hydraulic saw band tensioning including digital value display - 2 saw band speeds - 1 Bi-metal saw blade - Coolant system - 1 angle stop Iedpfx Aexaatbsh Aetr - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: square 250 x 250 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 170 x 170 mm Cutting capacity at 60 degrees: round 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Ijdpoxaagbofx Ah Aotr Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Mounted front right, swivelling - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of bow descent - Carbide blade guides - Hydraulic blade tensioning including digital value display - 2x saw blade speeds - 1x Bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) Itjdpfx Ahsw U U Uwo Aor - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering - Saw band guides with carbide plates - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice