Mig Mag Varjenje nakup rabljenega (5.965)

Stanje: dober (rabljeno), 1 used MIG/MAG welding machine Brand: Lorch Model: Micor Mig 400 with separate wire feed unit Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires - Steel [Ø in mm]: 0.6 - 1.6 Weldable wires - Stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires - Aluminium [Ø in mm]: 1 - 1.6 Weldable wires - CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Stepless MIG/MAG Duty Cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode Welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode Duty Cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 General Data Open-circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Power supply fuse 3~ (50/60 Hz) [A]: 32 Positive power tolerance 3~ (50/60 Hz) [%]: 15 Negative power tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and Approvals Protection class: IP32S Insulation class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Rated cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Cgjdpsy Ia Hmsfx Ahxjt Dimensions (LxWxH) [mm]: 880 × 490 × 885 Dimensions – wire feed unit (LxWxH) [mm]: 575 × 245 × 434 Weight [kg]: 61

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), delovna širina: 620 mm, številka stroja/vozila: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive system is hydraulic, supported by positioning and control systems. The machine features its own vacuum pump. Low operating hours (approx. 6,800 h). Usable heating element area: width 600 mm x depth 400 mm Max. part dimensions: - Max. part width: 620 mm - Max. part depth: 420 mm - Max. upper part height: 350 mm - Max. lower part height: 350 mm (Combinations of part heights are possible, depending on contour.) - Max. operating temperature for contact process: 400°C The machine’s modular frame allows for easy retrofitting. Side and front doors in the welding area can be easily opened for simple retooling. The automatic safety lift door offers a high level of operator safety. Temperature controllers on the control panel display both actual and set values. The operating panel is a Siemens PLC control unit. Machine control is managed via Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety shutoffs in case of overtemperature. Pin systems in the tool clamping surfaces enable reproducible positioning. Advantages of heating element welding technology: - Secure welding of workpieces with low or varying wall thicknesses - Low rejection rates due to precise and reproducible weld joints - Sensitive parts can be welded thanks to precise time, temperature, and force control - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility must be verified) Technical specifications: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 wires, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with control panel: approx. 1.8 m Cgedpfx Ahoykvdlsxot - Machine depth: approx. 2.1 m - Machine depth with control panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with safety door fully raised: approx. 2.85 m (door open) Machine weight: approx. 2.2 t

Stanje: dober (rabljeno), 1 used MIG/MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 Welding range 3~ 400 V [A]: 30 – 400 Voltage range [V]: 15.5 – 34 Weldable wire – Steel [Ø in mm]: 0.6 – 1.6 Weldable wire – Stainless steel [Ø in mm]: 0.8 – 1.2 Weldable wire – Aluminium [Ø in mm]: 1 – 1.6 Weldable wire – CuSi [Ø in mm]: 0.8 – 1.2 Voltage adjustment: stepless MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 – 400 Voltage range [V]: 20.4 – 36 Weldable electrodes [Ø in mm]: 1.5 – 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Cgjdpfoy Hfwnjx Ahxot Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 – 83 Wire feed speed standard [m/min]: 1 – 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Mains fuse 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulation class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling system: gas-cooled / water-cooled Cooling performance (nominal, l/min): [kW] 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Case dimensions (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Stanje: zelo dobro (rabljeno), Točkovne varilne klešče Dalex Cgjdpfjy Inwgex Ahxot Tip 3011/2 Doseg 250 mm Nazivna moč 2,4 KVA 380 Voltov

Stanje: pripravljen za uporabo (rabljen), Stroji za uporovno varjenje, uporovni varilnik, Meritus RAS 150 VSH, rabljeni stroj Proizvajalec: Meritus Tip: RAS150VSH, MPW-RW 811-1410 Skupne mere: 900 x 1370 x 2450 mm Električni podatki: 415 V; 150 kVA; 50 Hz Cgsdpfjrdf Acjx Ahxst Opremljen s svetlobno zaveso Orodje s hlajenjem z vodo

Stanje: dober (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 2014230, Ponudba 25074 Tehnični podatki: Codpey Hraiofx Ahxogt - Nosilnost v vodoravnem položaju: 600 kg - Premer planske plošče: 1000 mm - Planska plošča motorizirano nagibna - Hitrost vrtenja planske plošče električno brezstopenjsko nastavljiva - Prenos varilnega toka: 500 A - Pogon: 400 V - Višina mize v vodoravnem položaju: 900 mm - Nožno stikalo - Potrebna površina: ca. Š 1000 x V 900 x G 1350 mm - Teža ca. 450 kg

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: omejena funkcionalnost, Polnilni in pakirni stroj Proizvajalec: Volpak, model S130D Volpak S-130-D – stroj za tristranske varjene vrečke za prah in granulate, Duplexno delovanje Vključno z dvema mešalnima lijakoma in polžnim dovajanjem Cgsdpfx Ajy Ah Rpjhxet Kodirnik za vroče folije Velikost vrečk od 50 x 50 mm do 130 x 200 mm Zmogljivost do 80 vrečk/min (duplex način) Zelo primeren za živila Tehnične specifikacije na slikah Vključno z veliko rezervnih in obrabnih delov Vključno z originalno dokumentacijo (nemško + angleško)

Stanje: dober (rabljeno), Leto izdelave: 2018, Burning-Drilling Machine Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic tool turret Tool holders: 14 Drive power: 16 kW Cjdpfjvzrczox Ahxegt Drilling diameter: 5 - 40 mm V-scoring/marking: 5 to 40 mm Sheet dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitation) Minimum finished part dimensions: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero position transverse conveyor Number of carriages: 2 clamps NC feed carriage, side positioned 4 clamping jaws (2+2) 3 short stroke transverse conveyors Working height: 1,000 mm Outfeed side: Discharge roller conveyor with lowerable unloading table and chute Material collection container for unloading small parts. Filter unit incl. piping High performance for use with carbide tools. Suitable for drilling, thread cutting, marking, milling, plasma cutting of flat steel and plates. Software options for milling and marking LANTEK license ä5526 Availability: Immediately!

Stanje: rabljeno, Leto izdelave: 1975, Stock number: 2480 Manufacturer: Rade Koncar Year of manufacture: 1975 Type: 2B-1 Serial number: 75271 Welding current (primary): 220 V, 16 kVA, 92 A 380 V, 16 kVA, 53 A Welding current (secondary): 220 V, 100 A 380 V, 200 A Features: mobile Dimensions: 500 x 700 x 600 mm Weight: 120 kg Cedpfx Ahjrnrtrsxegt

Stanje: rabljeno, globina grla: 420 mm, nazivna moč pri 50-odstotnem delovnem ciklu: 60 kVA, vhodna napetost: 400 V, vrsta hlajenja: voda, nazivna (navidezna) moč: 14 kVA, Machine à souder par points type 8003 TECNA - pour le soudage d’écrous et de tôles - entièrement révisée et contrôlée Tension nominale : 400V Puissance nominale : 60kVA à 50% de cycle de service Courant de court-circuit : 22kA Courant de soudage : 17,6kA Protection par fusible : 125A Profondeur du col de cygne : 420mm Force des électrodes : 470daN Cylindre avec pré-course Codpjh N Sd Uofx Ahxsgt Course totale : 80mm Double course : 60mm Cône d’électrode : MK2 - porte-électrodes neuf Nouveau pédalier 2 positions conforme aux normes de sécurité (UVV) Tous les flexibles pneumatiques et d’eau ont été remplacés Poids env. 330kg - TE 180 avec affichage digital du courant de soudage, montée en puissance, etc. - Sectionneur principal dans l’armoire électrique - Documentation / notice d’utilisation d’origine disponible - Contrôle machine avec attestation valable jusqu’à 02/2026 Démonstration et visite sur rendez-vous, Mise en service et initiation client possibles en supplément Machine située à Dresde, près de l’A17 Un groupe de refroidissement adapté est aussi toujours en stock - bien sûr avec supplément ;-)

Stanje: rabljeno, Leto izdelave: 1994, številka stroja/vozila: 00258 PE 364, Lg.Nr. 26071 Tehnični podatki: - Nosilnost: 650 kg - Dimenzije vrtljive plošče: 700 x 700 mm - Pogonska vrtljiva plošča, brezstopenjsko nagibanje: 0 - 135° - Motorni vrtilni gib, brezstopenjsko nastavljiv: 0,07 - 1,5 obr/min - Višina mize v vodoravnem položaju: 890 mm Cjdpfx Ahjy E N T Rjxsgt - Električni upravljalni gumb - Potreben prostor: pribl. Š 850 x V 890 x G 1200 mm - Teža: pribl. 400 kg

Leto izdelave: 1998, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Edge milling machine, manufacturer: IMAC Cgodey A Hnmspfx Ahxst Year of manufacture: 1998 Model: CB 18 Series: B20

Stanje: dober (rabljeno), Leto izdelave: 1982, številka stroja/vozila: 1501-2, Ponudba 26128 Cgodpfey Ec Emjx Ahxet Tehnični podatki: - max. nosilnost v vodoravnem položaju: 5000 kg - premer čelne plošče: 1150 mm - motorizirano nagibna čelna plošča: 0 - 130° - vrtenje električno brezstopenjsko nastavljivo - desni + levi tek - prenos varilnega toka: ca. 500 A - pogon: 400 V - višina mize v vodoravnem položaju: ca. 1220 mm - ročni daljinski upravljalnik - potrebna velikost prostora: ca. š 1350 x v 1220 x g 1900 mm - teža: ca. 3500 kg - adapter plošča s pritrditveno napravo za okrogel material

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Offered as part of insolvency proceedings is a DC TIG welding machine Manufacturer: Migatronic Model: Pilot 2400 Year of manufacture: 2004 Machine No.: 04050694 Technical data: 380 Volts Welding range: 5–240 Amps Welding output: Cgsdpfx Ahofthy Rjxjt - 240 Amps at 35% duty cycle - 170 Amps at 100% duty cycle 2/4-stroke operation Pulse function HF ignition Additional water cooling unit KG 2 No. 25730509, 220 Volts 8 m torch package With earth cable — without pressure regulator — Dimensions (approx.): 510 x 370 x 220 mm

Stanje: novo, Table length 3000 mm Table width 1500 mm Table height 200 mm Machine weight approx. 1.6 t The Professional 750 table 3000x1500x200 mm, plasma nitrided, features a diagonal hole arrangement on the tabletop and a parallel hole arrangement with a 50 mm grid on the sides. The boreholes have a diameter of 28 mm. The table has a material thickness of approx. 24.5–27 mm and is manufactured from high-quality steel S355J2+N. Grid lines at 100 mm intervals facilitate the setup of your fixtures. The welding tables are equipped with a scale as standard. Cgodpfxogvkc Ns Ahxst Includes 6x Basic Adjustment Legs 650, Item No. 280858.X

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Various spot welding machines and a Dalex cooling system are available. 1) 2x Dalex PL 80-1 spot welding machines, rated power (50% duty cycle): 80 kVA, max. welding power: 245 kVA, max. short-circuit current: 35 kA, primary voltage: 380 V, open circuit voltage: 8.44 V, cooling water flow rate: 10 l/min, electrode force range: 100 daN–600 daN. 2) Dalex PMS 10/1 spot welding machine, rated power (50%): 32 kVA, max. primary short-circuit current: 30 kA, primary voltage: 380 V, open circuit voltage: 4.6 V, electrode force range: 65 daN–390 daN. 3) Dalex SL 16/EA spot welding machine, rated power (50%): 16 kVA, connected load: 37 kVA, secondary short-circuit current: 17 kA, electrode force range: 17 daN–278 daN, open circuit voltage: 3.6 V, weight: approx. 200 kg. 4) 2x Dalex spot welding tongs RS 11 and 3136. 5) Dalex DRF 4 water cooling unit, year of manufacture: 1989, refrigerant: R22, charge: 3.5 kg, flow rate: 1.3 m³/h, max. operating overpressure: 26 bar, cooling capacity: 4.5 kW, weight: approx. 140 kg. An on-site inspection is possible. Package sale preferred. Csdpsy Eg Dtofx Ahxogt

Stanje: skoraj kot novo (rabljeno), Description of Equipment Area This is a pure component delivery. Robot KR 8 R 1620 arc (HW) Csdpoudb E Eefx Ahxogt The industrial robot KR 8 R1620 arc HW stands out in its class due to its high flexibility and large reach with optimal payload capacity. Additionally, the robot has been specifically designed and developed for welding processes. • Rated payload: 8 kg • Maximum reach: 1621 mm • Number of axes: 6 • Position repeatability (ISO 9283): ± 0.04 mm • Mounting position: any angle, floor, ceiling, wall • Protection rating (IEC 60529): IP54 • Wrist protection rating (IEC 60529): IP54 • Hollow shaft The robot mechanics are delivered in color R0000 KUKA orange. Depending on the robot model, the color of the base frame may vary (exception: KR 3 AGILUS and KR AGILUS-2, shipped with grey base frame). Linear unit KL 250-3 1CA (support length = 8m / stroke = 7.1m) -Further data available upon request-

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, Letnica izdelave 1994, modernizirana s strani proizvajalca strojev KUKA leta 2012. Linija ima enoto za struženje, stiskalnico za obod in enoto za dovajanje cevi za raztovarjanje zvarjenih komponent. To linijo lahko prilagodimo zahtevam kupca. Možna je tudi popolna obnovitev (retrofit). Cgjdpfjx I Efbjx Ahxst

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, IMPACT 4-v-1 iz zaloge Evropa ROČNI FIBER LASER 4-V-1 STROJ Z DVOJNIM SISTEMOM DOVODA ŽICE VARJENJE – ČIŠČENJE – REZANJE – ČIŠČENJE VARJENJA IMPACT FL 3000 je najsodobnejši laserski stroj za varjenje, čiščenje in rezanje v enem. Posebna programska oprema in nastavitev parametrov v tem laserskem stroju omogočata uporabo za čiščenje, rezanje in varjenje. Naprava zagotavlja nižje obratovalne stroške: poraba energije znaša približno 10–20 % običajnih postopkov varjenja, hitrost varjenja pa je 3–10-krat hitrejša v primerjavi s tradicionalnim obločnim, argonskim ali plazemskim varjenjem. Večina uporabnikov uporablja varilni aparat največ 20 % časa, enako velja za čiščenje in natančno rezanje. Varilni stroj z dodatnimi funkcijami za čiščenje in rezanje moči od 1,5 kW naprej stane najmanj 25 do 30.000 EUR. Ponujamo rešitev z vsemi funkcijami po 50 % nižji investicijski ceni, vključno z rezanjem in čiščenjem jekla ter drugih materialov. Če vas zanima, vam lahko pripravimo popolno ponudbo. Dobavljamo 3-v-1 stroje moči 1,5, 2 in 3 kW, Cgsdpfx Ajvca Nrshxst vključno s podajalnikom žice v ceni. 3 kW model ima 2 podajalnika žice, kar omogoča hitro menjavo pri varilcu. Modeli 1,5 in 2 kW potrebujejo eno fazo, 220 V. Model 3 kW deluje na 3 x 380 V. Cena je EXW (zaloga Evropa), naloženo na tovornjak. Prevoz, montaža, zagon, izobraževanje in letne servisne pogodbe so na voljo po dogovoru za doplačilo. Montažo in izobraževanje vedno izvaja naša strokovno usposobljena servisna ekipa na treh lokacijah v Evropi: Nizozemska, Nemčija, Romunija.

Stanje: novo, Leto izdelave: 2025, IMPACT 4v1 ze zaloge Evropa IMPACT FL 1500 je najsodobnejši laserski stroj za varjenje, čiščenje in rezanje v enem. Posebna programska oprema in nastavitev parametrov pri tem laserskem stroju omogočata uporabo za čiščenje, rezanje in varjenje. Večina strank uporablja varilni stroj največ 20 % časa, enako velja za čiščenje in fino rezanje. Varilni stroj z dodatnimi funkcijami čiščenja in rezanja moči 1,5 kW skupaj stane vsaj 25 do 30.000 EUR. Pri nas ponujamo isto rešitev za 50 % investicijskih stroškov in z možnostjo rezanja ter čiščenja jekla in drugih materialov. Če vas zanima, vam lahko pošljemo popolno ponudbo. Dobavljamo 3-v-1 stroje moči 1,5 – 2 in 3 kW Krmilnik žice je vključen v ceno. Model 3 kW ima dva podajalca žice, kar omogoča varilcu hitro preklapljanje. Modela 1,5 in 2 kW delujeta na 1 fazo 220 V. Model 3 kW deluje na 3 x 380 V. Cena je EXW (zaloga Evropa), vključuje nakladanje na tovornjak. Prevoz, montaža, zagon, usposabljanje in letne servisne pogodbe so na voljo za doplačilo. Montažo in usposabljanje vedno izvaja naša visoko usposobljena servisna ekipa na treh lokacijah v Evropi: Nizozemska, Nemčija, Romunija. Cjdpfx Aheu Nf Nzsxogt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Skoraj nova naprava. Porabljeni sta bili le 2 koluta varilne žice. Je v popolnem stanju, uporabljena je bila kot rezervna naprava. Cgjdpfx Ahsyxf R Sexot

Leto izdelave: 2023, stanje: novo, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning Cgsdpfx Ahogmiduexjt assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, Leto izdelave: 2023, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. Cgedpfehzuwcsx Ahxot We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Leto izdelave: 2023, stanje: novo, The SPR series is the most popular and preferred line of our manipulators among customers. By shifting the arm's rotation axis above the mounting plate plane, the weight of the carrier arm acts as a counterweight for the welded component. This technical solution provides a distinct advantage over the PX and BE series. It allows for flexible positioning of the welded part, including 'upside-down' orientations. STANDARD VERSION Positioner powered by three-phase current Cgedpfx Ahenqzrpsxst Arm rotation via hydraulic slewing drive Table rotation via electric slewing drive Arm height adjustment via hydraulic cylinders Function controls located on the positioner housing ADDITIONAL OPTIONS Wired control pendant Wireless control pendant Foot pedal on a cable for table rotation Variable-speed table rotation Rotating mass (positioner housing) Length and shape of the arm Customizable positioner configuration available Function controls via teach pendant

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21_0346, NEW – UNUSED High-performance positioner for manual or robotic welding – lifting and rotating device. Special equipment for specific applications, designed and manufactured by FÖRSTER Welding Systems GmbH. Maximum workpiece diameter: 2500 mm Cjdpjurlcrofx Ahxjgt Maximum workpiece weight: 20 tons Dimensions of the welding positioner: 7000 x 3000 x 3750 mm Weight (without counterweight): 20,000 kg Overall dimensions of the entire system: 8900 x 4800 x 3750 mm Total weight of the entire system: 40,000 kg Counterweight included in the scope of delivery. Complete documentation available. Technical support from the manufacturer is available upon request. The machine is located in central Poland.