Mig Mag Varjenje nakup rabljenega (19.573)

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0518018, Offer 24600 Technical Specifications: - Suitable for welding steel, aluminium, special metals, CrNi, etc. - Welding current: 450 A 60% duty cycle - 360 A 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS Pjdevncfmepfx Agpogw - FRONIUS water cooling unit - Separate wire feed case - Interconnecting cable set device – wire feed case 14 m - 4-roll wire feed, steplessly adjustable - MIG/MAG welding torch package, water-cooled, approx. 4 m - Earth cable - Pressure reducer - Mobile undercarriage - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirement: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 449607-1-1, vrsta vhodnega toka: Klimatska naprava, With E-Learning Lorch ArcWorld RS Mini Package includes: ArcWorld RS Mini Cell Welding unit Lorch S5 RM-XT B/W (ArcWorld) * The unit is configured as follows: Version: Yasakawa ArcWorld Unit system: SI unit, mm Power source variant: Power source with 1 wire feeder case System specification: Full process system Process: Pulse Process: SpeedPulse + SpeedPulse XT Process: Synergic + SpeedArc XT Additional process: SpeedArc Additional process: SpeedCold Additional process: SpeedRoot Additional process: Speed-TwinPuls + TwinPuls XT Additional process: SpeedUp Additional process: TwinPuls Pgjdpfx Agst Dzxyspjw Cooling: Water Extended water cooling: not included Operation: Control panel integrated in power source Wire feeder case: RF-06 (Euro-ZA) Drive roll set for wire feeder: 1.0/1.2 mm steel Robot interface for wire feeder: YASKAWA ArcWorld Quick coupler for wire guide connection on case Wire feed: not included Wire supply: not included Additional connector for torch control cable Intermediate hose package: Standard 5m Intermediate hose cross-section: 70 mm² Intermediate hose package holder: not included Robot interface: Ethernet/IP Cable to robot controller: EtherNet, 5m LorchNet rear LorchNet front Chassis / base: Feet for ArcWorld cell Mains connection: with plug Mains cable length: Standard Dust filter: Nonwoven dust filter Control language setting: DE - German Documentation language: Multilingual Packaging: Standard Torch cleaning station: TCS-D with wire cutter Workpiece lead: 95 mm², 4 m, cable lug M12 Hose package, comprising: Torch neck LMR 2 - TN 6 CTC W, 45° Package LMR 2 - HP 10-W (CR), 1.50 m Starter set Accessories

Leto izdelave: 1995, Stanje: rabljeno, 1 used, well-maintained water-cooled MIG-MAG shielding gas welding machine Pgodob Nd E Rspfx Agpew Make: ARTEC Model: W 501 Year of manufacture: 1995 Technical Data: - Welding current range up to 500 A - Weight approx. 250 kg Accessories / Special Features: - Water cooling - Separate ARTEC DV-W1 wire feeder with 4-roll wire drive - Includes hose package, pressure regulator, and ground cable For more technical details, see images! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Stanje: rabljeno, MIG/MAG hose package, MIG/MAG welding torch, hose package for welding robots, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin Pgedpst U Traefx Agpow -water-cooled -Transport dimensions: Ø 560 x 120 mm -Weight: 9.8 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618012, Technical data: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate cable set, device to wire feeder case: 1 m - 4-roller wire feed, steplessly adjustable - MIG/MAG torch, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis - Connection requirements: 400 V / 6.6 A / 8.7 kVA - Footprint approx.: W 650 x H 900 + 450 x D 1100 mm Pjdpfx Agevncubjpogw - Weight: approx. 200 kg

Stanje: dober (rabljeno), Welding current range – 200 A Weight: 158 kg Accessories / Special features: - Separate ESAB A 10 wire feeder with 2-roll wire feed - Including hose package, pressure regulator and ground cable Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Podpfsfkpgdex Agpsgw D - 44143 Dortmund - Wambel

Stanje: rabljeno, MIG/MAG hose package, MIG/MAG welding torch, hose package for welding robot Pgjdpolx Nvgofx Agpjw -MIG/MAG hose package: for welding robots -Length: 1.91 m -Water-cooled -Weight: 2.0 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618019, Offer 24589 Technical specifications: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Adjustable welding current: 3 A – 450 A Pgsdpfx Agjvnb Tpopsw - FRONIUS synergic control system - FRONIUS water cooling unit - Separate wire feed unit - Intermediate hose package (machine – wire feed unit): approx. 14 m - 4-roll continuously adjustable wire feed - MIG/MAG water-cooled torch package: approx. 4 m - Ground cable - Pressure regulator - Mobile undercarriage - Connection: 400 V / 6.6 A / 8.7 kVA - Space requirements: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: rabljeno, MIG/MAG hose package, MIG/MAG welding torch, hose package for welding robots, intermediate hose package - MIG/MAG hose package: Intermediate hose package for welding robots - Length: 6.0 m Pgodpfx Aet U Tq Negpow - Connector: 16-pin - Water-cooled - Transport dimensions: Ø 600 x 140 mm - Weight: 13.2 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 193568, Offer 24606 Technical Data: - Welding current max. 450 A at 60% duty cycle - 320 A at 100% duty cycle - Welding current adjustable in 3 coarse and 12 fine steps - 50 to 450 A - Separate wire feeder unit with 1 m intermediate hose package - 4-roller wire feed, steplessly adjustable - 2-stroke and 4-stroke operation - Digital volt and ampere display - Spot welding function - Intermittent welding function - Water-cooled torch package, 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Space required: approx. W 750 x D 1100 x H 1600 mm - Weight: approx. 180 kg Psdpfjvt Twqox Agpogw

Stanje: rabljeno, MIG/MAG hose package, MIG/MAG welding torch, hose package for welding robots, intermediate hose package, robot hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin Pgedst U Trgopfx Agpow -Water-cooled -Transport dimensions: Ø 600 x 130 mm -Weight: 10.9 kg

Stanje: dober (rabljeno), Leto izdelave: 2004, številka stroja/vozila: U1970409651, Offer 25188 Technical data: - Adjustable welding current: 20 A – 225 A - Separate wire feed unit with intermediate hose package: 6 m - 2-roller wire feed, infinitely variable - 2-stroke / 4-stroke mode selection - Air-cooled torch package, approx. 4 m - Ground cable - Pressure regulator - Connection: 400 V - Space requirement: approx. W 750 x H 1500 x D 1100 mm Pgedpfx Aoww Ub Dogpjw - Weight: approx. 120 kg

Stanje: dober (rabljeno), Shielded gas welding machine, shielded gas welding unit, arc welding system, MIG/MAG welding system - Max. welding power: 400 A - Wire feed: 4-roll drive - Design: Water-cooled Pgodpfx Agewl Dptopew - Accessories: includes ground cable, detachable wire feeder, gas regulator, 4 m hose package - Quantity: 1 unit available - Dimensions: 500/1010/H1600 mm - Weight: 162 kg

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 0108.0272, Ref. No. 24189 Technical Specifications: - Welding current: 330 A at 40% duty cycle, 220 A at 100% duty cycle - Welding current adjustable in 4 coarse and 6 fine steps: 30 A / 15.5 V – 350 A / 24 V - 4-roll wire feeder, continuously adjustable: 1.2 – 18 m/min - 2-stroke and 4-stroke mode selection Psdpfx Agjtp Id Ujpegw - Torch package: approx. 4 m in length - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz - Space requirement: approx. W 500 x H 1000 x D 1000 mm - Weight: approx. 140 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 989108 L, Offer 24191 Technical data: - Welding current: - max 250 A at 30% duty cycle - 180 A at 60% duty cycle - 140 A at 100% duty cycle - Welding current adjustable in 8 steps - 30 A / 15 V up to 300 A / 30 V - 4-roll wire feed, continuously adjustable - 2-stroke and 4-stroke modes selectable Pgsdpfxjtvfpke Agpew - Weld seam length timer adjustment - Air-cooled torch package, approx. 3 m - Ground cable - Pressure regulator - Connection: 400 V - Required space: approx. W 550 x H 1090 x D 950 mm - Weight: approx. 140 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0625004, Listing 24603 Technical Specifications: - Suitable for welding steel, aluminum, special metals, Cr Ni (chrome-nickel alloys), etc. - Welding current: 450 A at 60% duty cycle; 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control system by FRONIUS - FRONIUS water cooling unit - Separate wire feed case - Intermediate connection set (machine – wire feed case): 10 m - 4-roll continuously adjustable wire feed - MIG/MAG torch package, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis Pgjdpfx Agsvncqvopjw - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirements: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 195311, Offer 24601 Technical Data: - Welding current: max. 450 A at 60% duty cycle - 320 A at 100% duty cycle - Welding current adjustable in 3 coarse and 12 fine steps - 50 to 450 A - Separate wire feeder unit with 1 m interconnecting cable - 4-roller wire feed, infinitely variable - 2-stroke + 4-stroke operation selectable - Digital volt and amp display - Spot welding Podpfx Asvt Trzjgpsgw - Interval welding - Water-cooled torch assembly, 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Dimensions (approx.): W 750 x D 1100 x H 1600 mm - Weight (approx.): 180 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 195312, Offer 24596 Technical Data: - Welding current: max. 450 A at 60% duty cycle (ED) - 320 A at 100% duty cycle (ED) - Welding current adjustable in 3 coarse levels + 12 fine levels - 50 to 450 A - Separate wire feed case with interconnecting cable: 1 m - 4-roll wire feed, continuously adjustable - 2-stroke + 4-stroke operation Pjdpfx Agsvt Tvmopjgw - Digital volt and ampere display - Spot welding function - Interval welding function - Water-cooled torch package: 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Space requirement: approx. W 750 x D 1100 x H 1600 mm - Weight: approx. 180 kg

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Pjdpfx Agswbil Sopsgw Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: kot nova (razstavni stroj), Fronius TPS 3200 ✅ Scope of delivery: Pgsdpewbilxofx Agpsw ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The unit shuts down if the water cooling fails or overheats to protect the torch assembly. These features typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most sensible wire feed case. The wire spool is safely stored inside the closed case. ➤ Fronius intermediate hose package, long version – each unit includes a 5-meter connecting hose set between the power source and wire feeder for greater flexibility and improved handling. Take the wire feed case off the machine to reach difficult areas! The connecting hose is neatly mounted on a hook at the side of the unit (hooks are manufactured by us). ➤ Fronius large transport cart – Probably the best cart with gas cylinder holder on the market. ➤ Binzel torch package – With up/down amperage adjustment on the torch handle. ➤ Earth cable 3–4m Dobkh Hjum Rw Dsufpokk (unclear term left untranslated) ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools With this equipment you can weld nearly all materials, including aluminium, steel, and V2A. It features cold wire programmes and is also suitable for Mig brazing (CuSi), which is widely used in sheet metalworking. Additional options available for a surcharge, for example Fronius Job Master torch package (display on torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna, Austria 1230! ✔ Insured shipping on pallet available! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the equipment? For clarification: we buy nearly new pre-owned units, dismantle and check everything, replace wear parts if necessary, and only release for sale after successful test welding. "All" equipment is clean and has neither burn marks on the display nor multiple burn holes or dents across the unit! You are buying an item from us that is also ⭐worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for an intra-Community delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Prepayment or cash on collection in person. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always stock 60–80 units – exclusively Fronius, no other brands! We know these machines inside out and never sell anything we aren't fully familiar with.

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net incl. BINZEL TORCH PACKAGE UP/DOWN or Fronius AW torch package with display on torch incl. conversion of connections (+€500) ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooler – Standard with Flow Control, Thermocontrol, and coolant filter. The cooler switches off in the event of a cooling failure or overheating to protect the torch package. These functions usually cost around 400 € extra at Fronius. ➤ Fronius VR 7000 Wire Feeder Case – Compact and practical - in our opinion the most useful feeder case - the wire is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – each unit is supplied with a 5-metre connection hose package between the power source and the wire feeder for greater flexibility and improved handling. Take the wire feeder with you to hard-to-reach workplaces! The connection hose is neatly mounted on a hook at the side of the unit. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage regulation on the torch. ➤ Ground cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools With this unit, almost all materials can be welded, including aluminium, steel and stainless (V2A). It is equipped with pulse wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in panel beating. Further options are available at extra charge E.g. Fronius Job Master torch package (display on torch) + EUR 450.00 First 10 buyers of a unit receive an extra -> second torch package free of charge Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Vienna, 1230 Austria! ✔ Insured pallet shipping no problem! ✔ Pgodpfxjwbillo Agpew We are also available via Whatsapp and Viber. ✅QUESTIONS✅QUESTIONS✅QUESTIONS✅QUESTIONS: ✅QUESTIONS✅QUESTIONS✅QUESTIONS✅ ►►►What condition are the machines in? For explanation: we buy as-new used machines, completely disassemble and check them, replace worn parts if necessary, and only after successful test-welding do we release them for sale. "All" machines are clean, no burn holes on the displays, and without numerous burn marks or dents! You are buying an item that is ⭐worth seeing and doesn't look completely worn out! ►►►Will we receive an invoice with our purchase? Yes, you will receive a proper invoice. If you have a valid VAT ID, and meet the requirements for Intra-Community Delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Advance payment or cash upon personal collection ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 machines in stock – only Fronius, no other brands! We know these machines inside out and don’t sell anything we're not familiar with.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? Psdpswbh Ifofx Agpsgw We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: kot nova (razstavni stroj), FRONIUS TPS 2700 with FK 4000 (SYNCHROPULS 270A UNIT) Alu Edition Podpfxswbitvo Agpjgw ✅ Scope of delivery: ➤ Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 water cooling ➤ Fronius torch package with display on the torch (arc, amperage, jobs etc. adjustable directly from the torch) ➤ Fronius trolley ➤ Ground cable 3-4m ➤ Brand new Messer pressure regulator ➤ Gas hose ►►► Perfect for aluminium The Fronius TPS 2700 Alu Edition is especially suited for aluminium welding. Precise welding technology – user-friendly operation ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured shipping on pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What condition are the units in? To clarify: We purchase used devices in like-new condition, disassemble them, check everything, replace wear parts where necessary, and only after a successful test weld do we release the units for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn marks or dents scattered across the device! With us you buy an item that is also ⭐worth seeing and doesn’t look worn out! ►►►Do we receive an invoice when buying from you? Yes, with us you get a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are there? Prepayment or cash on collection in person ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packed and insured on an Euro-pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no possibility to provide a warranty. However, the units can be tested and paid for in cash on site. ►►►Why buy from us? We are specialists for this Fronius welding machine series and always have 60–80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we are not familiar with.

Stanje: kot nova (razstavni stroj), ⭐ FRONIUS TPS 4000 ⭐ Fully Equipped Device Description / Scope of Delivery: Fronius TPS 4000 unit with full equipment – top specification! - Power source Pulse 400 Amps - FK 4000 FC cooling unit with optional filter, including flow control (==> if no water is circulating, the unit automatically shuts off to protect the torch hose assembly). - VR 4000 wire feeder with optional rollers underneath + extended interconnecting hose package + metal feed rollers – only premium components used. - Fronius AW5000 torch package with Job Master function on the torch (==> Display on the torch / adjustable amps, job selection, wire feed, and arc control directly on the torch) Photo = scope of delivery. All prices stated are starting prices. Pricing is tailored individually according to configuration requirements. Original price approx. €15,000 (net), offered at 1/3 of the new price. Not comparable to Transsteel scrap. Why buy from us and not somebody else? - We are professionals when it comes to this series of Fronius welding equipment. We always have around 60-80 units in stock. Only these Fronius models – no other brands! - We don’t just pass devices through – all units are dismantled, checked, wear parts replaced, and only once everything works flawlessly do we sell the equipment. - All our devices come with the popular Fronius torches. NO €100 "E*b*a*y" torch, but REAL QUALITY! Fronius torches cost between €650 and €900 net, depending on the configuration! - All our units are clean and have no burn marks on the displays or numerous burn holes / dents on the casing! You get from us an item that is presentable and not completely worn out! - As our customer, you benefit from affordable spare parts and support if needed. - You receive a proper invoice with VAT disclosed. All units can be viewed, paid for, and collected by appointment at our main warehouse in Vienna! Pgedpfx Agevlwh Dopjw Insured palletized shipping is, of course, possible! All prices are starting prices – you can customize your equipment with us. Robot device or manual unit. Long or short interconnecting hose package. Various hose packages available. Synchropulse. 270, 400, or 500 Amp units in stock. CMT version available as manual or robot model. It’s best to call us so we can discuss your application and provide you with an initial price estimate.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: zrak, varilni tok (maks.): 280 A, For sale: VLH TR 280 C 280 AMP 400 Volt 21 selectable steps 2/4-stroke operation 4-roller wire feed Spot welding Suitable for welding steel and stainless steel Pgedpfx Agowql Eyjpow Fully overhauled, tested, and serviced Test welding possible Included: 3-meter welding torch, earth cable with clamp, and gas hose. Test welding is possible. A video of the machine in welding operation can be provided. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside Europe, shipped on Euro pallets. All our machines are serviced and 100% ready for use, unless otherwise specified. The pictures above show the actual machine. We can also offer other machine types, such as: Used, new, Mig, Mag, CO2, Tig, Pulse, AC/DC, Plasma, water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.